diff options
Diffstat (limited to 'drivers/mfd/twl-core.c')
| -rw-r--r-- | drivers/mfd/twl-core.c | 15 |
1 files changed, 15 insertions, 0 deletions
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index e87140bef667..db11b4f40611 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -98,7 +98,11 @@ #define TWL4030_BASEADD_BACKUP 0x0014 #define TWL4030_BASEADD_INT 0x002E #define TWL4030_BASEADD_PM_MASTER 0x0036 + #define TWL4030_BASEADD_PM_RECEIVER 0x005B +#define TWL4030_DCDC_GLOBAL_CFG 0x06 +#define SMARTREFLEX_ENABLE BIT(3) + #define TWL4030_BASEADD_RTC 0x001C #define TWL4030_BASEADD_SECURED_REG 0x0000 @@ -1204,6 +1208,11 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) * Disable TWL4030/TWL5030 I2C Pull-up on I2C1 and I2C4(SR) interface. * Program I2C_SCL_CTRL_PU(bit 0)=0, I2C_SDA_CTRL_PU (bit 2)=0, * SR_I2C_SCL_CTRL_PU(bit 4)=0 and SR_I2C_SDA_CTRL_PU(bit 6)=0. + * + * Also, always enable SmartReflex bit as that's needed for omaps to + * to do anything over I2C4 for voltage scaling even if SmartReflex + * is disabled. Without the SmartReflex bit omap sys_clkreq idle + * signal will never trigger for retention idle. */ if (twl_class_is_4030()) { u8 temp; @@ -1212,6 +1221,12 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) temp &= ~(SR_I2C_SDA_CTRL_PU | SR_I2C_SCL_CTRL_PU | \ I2C_SDA_CTRL_PU | I2C_SCL_CTRL_PU); twl_i2c_write_u8(TWL4030_MODULE_INTBR, temp, REG_GPPUPDCTR1); + + twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &temp, + TWL4030_DCDC_GLOBAL_CFG); + temp |= SMARTREFLEX_ENABLE; + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, temp, + TWL4030_DCDC_GLOBAL_CFG); } if (node) { |