diff options
Diffstat (limited to 'drivers/mfd/ab8500-gpadc.c')
| -rw-r--r-- | drivers/mfd/ab8500-gpadc.c | 1075 |
1 files changed, 0 insertions, 1075 deletions
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c deleted file mode 100644 index 005f9ee34cd1..000000000000 --- a/drivers/mfd/ab8500-gpadc.c +++ /dev/null @@ -1,1075 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Arun R Murthy <arun.murthy@stericsson.com> - * Author: Daniel Willerud <daniel.willerud@stericsson.com> - * Author: Johan Palsson <johan.palsson@stericsson.com> - * Author: M'boumba Cedric Madianga - */ -#include <linux/init.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#include <linux/delay.h> -#include <linux/pm_runtime.h> -#include <linux/platform_device.h> -#include <linux/completion.h> -#include <linux/regulator/consumer.h> -#include <linux/err.h> -#include <linux/slab.h> -#include <linux/list.h> -#include <linux/mfd/abx500.h> -#include <linux/mfd/abx500/ab8500.h> -#include <linux/mfd/abx500/ab8500-gpadc.h> - -/* - * GPADC register offsets - * Bank : 0x0A - */ -#define AB8500_GPADC_CTRL1_REG 0x00 -#define AB8500_GPADC_CTRL2_REG 0x01 -#define AB8500_GPADC_CTRL3_REG 0x02 -#define AB8500_GPADC_AUTO_TIMER_REG 0x03 -#define AB8500_GPADC_STAT_REG 0x04 -#define AB8500_GPADC_MANDATAL_REG 0x05 -#define AB8500_GPADC_MANDATAH_REG 0x06 -#define AB8500_GPADC_AUTODATAL_REG 0x07 -#define AB8500_GPADC_AUTODATAH_REG 0x08 -#define AB8500_GPADC_MUX_CTRL_REG 0x09 -#define AB8540_GPADC_MANDATA2L_REG 0x09 -#define AB8540_GPADC_MANDATA2H_REG 0x0A -#define AB8540_GPADC_APEAAX_REG 0x10 -#define AB8540_GPADC_APEAAT_REG 0x11 -#define AB8540_GPADC_APEAAM_REG 0x12 -#define AB8540_GPADC_APEAAH_REG 0x13 -#define AB8540_GPADC_APEAAL_REG 0x14 - -/* - * OTP register offsets - * Bank : 0x15 - */ -#define AB8500_GPADC_CAL_1 0x0F -#define AB8500_GPADC_CAL_2 0x10 -#define AB8500_GPADC_CAL_3 0x11 -#define AB8500_GPADC_CAL_4 0x12 -#define AB8500_GPADC_CAL_5 0x13 -#define AB8500_GPADC_CAL_6 0x14 -#define AB8500_GPADC_CAL_7 0x15 -/* New calibration for 8540 */ -#define AB8540_GPADC_OTP4_REG_7 0x38 -#define AB8540_GPADC_OTP4_REG_6 0x39 -#define AB8540_GPADC_OTP4_REG_5 0x3A - -/* gpadc constants */ -#define EN_VINTCORE12 0x04 -#define EN_VTVOUT 0x02 -#define EN_GPADC 0x01 -#define DIS_GPADC 0x00 -#define AVG_1 0x00 -#define AVG_4 0x20 -#define AVG_8 0x40 -#define AVG_16 0x60 -#define ADC_SW_CONV 0x04 -#define EN_ICHAR 0x80 -#define BTEMP_PULL_UP 0x08 -#define EN_BUF 0x40 -#define DIS_ZERO 0x00 -#define GPADC_BUSY 0x01 -#define EN_FALLING 0x10 -#define EN_TRIG_EDGE 0x02 -#define EN_VBIAS_XTAL_TEMP 0x02 - -/* GPADC constants from AB8500 spec, UM0836 */ -#define ADC_RESOLUTION 1024 -#define ADC_CH_BTEMP_MIN 0 -#define ADC_CH_BTEMP_MAX 1350 -#define ADC_CH_DIETEMP_MIN 0 -#define ADC_CH_DIETEMP_MAX 1350 -#define ADC_CH_CHG_V_MIN 0 -#define ADC_CH_CHG_V_MAX 20030 -#define ADC_CH_ACCDET2_MIN 0 -#define ADC_CH_ACCDET2_MAX 2500 -#define ADC_CH_VBAT_MIN 2300 -#define ADC_CH_VBAT_MAX 4800 -#define ADC_CH_CHG_I_MIN 0 -#define ADC_CH_CHG_I_MAX 1500 -#define ADC_CH_BKBAT_MIN 0 -#define ADC_CH_BKBAT_MAX 3200 - -/* GPADC constants from AB8540 spec */ -#define ADC_CH_IBAT_MIN (-6000) /* mA range measured by ADC for ibat */ -#define ADC_CH_IBAT_MAX 6000 -#define ADC_CH_IBAT_MIN_V (-60) /* mV range measured by ADC for ibat */ -#define ADC_CH_IBAT_MAX_V 60 -#define IBAT_VDROP_L (-56) /* mV */ -#define IBAT_VDROP_H 56 - -/* This is used to not lose precision when dividing to get gain and offset */ -#define CALIB_SCALE 1000 -/* - * Number of bits shift used to not lose precision - * when dividing to get ibat gain. - */ -#define CALIB_SHIFT_IBAT 20 - -/* Time in ms before disabling regulator */ -#define GPADC_AUDOSUSPEND_DELAY 1 - -#define CONVERSION_TIME 500 /* ms */ - -enum cal_channels { - ADC_INPUT_VMAIN = 0, - ADC_INPUT_BTEMP, - ADC_INPUT_VBAT, - ADC_INPUT_IBAT, - NBR_CAL_INPUTS, -}; - -/** - * struct adc_cal_data - Table for storing gain and offset for the calibrated - * ADC channels - * @gain: Gain of the ADC channel - * @offset: Offset of the ADC channel - */ -struct adc_cal_data { - s64 gain; - s64 offset; - u16 otp_calib_hi; - u16 otp_calib_lo; -}; - -/** - * struct ab8500_gpadc - AB8500 GPADC device information - * @dev: pointer to the struct device - * @node: a list of AB8500 GPADCs, hence prepared for - reentrance - * @parent: pointer to the struct ab8500 - * @ab8500_gpadc_complete: pointer to the struct completion, to indicate - * the completion of gpadc conversion - * @ab8500_gpadc_lock: structure of type mutex - * @regu: pointer to the struct regulator - * @irq_sw: interrupt number that is used by gpadc for Sw - * conversion - * @irq_hw: interrupt number that is used by gpadc for Hw - * conversion - * @cal_data array of ADC calibration data structs - */ -struct ab8500_gpadc { - struct device *dev; - struct list_head node; - struct ab8500 *parent; - struct completion ab8500_gpadc_complete; - struct mutex ab8500_gpadc_lock; - struct regulator *regu; - int irq_sw; - int irq_hw; - struct adc_cal_data cal_data[NBR_CAL_INPUTS]; -}; - -static LIST_HEAD(ab8500_gpadc_list); - -/** - * ab8500_gpadc_get() - returns a reference to the primary AB8500 GPADC - * (i.e. the first GPADC in the instance list) - */ -struct ab8500_gpadc *ab8500_gpadc_get(char *name) -{ - struct ab8500_gpadc *gpadc; - - list_for_each_entry(gpadc, &ab8500_gpadc_list, node) { - if (!strcmp(name, dev_name(gpadc->dev))) - return gpadc; - } - - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(ab8500_gpadc_get); - -/** - * ab8500_gpadc_ad_to_voltage() - Convert a raw ADC value to a voltage - */ -int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel, - int ad_value) -{ - int res; - - switch (channel) { - case MAIN_CHARGER_V: - /* For some reason we don't have calibrated data */ - if (!gpadc->cal_data[ADC_INPUT_VMAIN].gain) { - res = ADC_CH_CHG_V_MIN + (ADC_CH_CHG_V_MAX - - ADC_CH_CHG_V_MIN) * ad_value / - ADC_RESOLUTION; - break; - } - /* Here we can use the calibrated data */ - res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_VMAIN].gain + - gpadc->cal_data[ADC_INPUT_VMAIN].offset) / CALIB_SCALE; - break; - - case XTAL_TEMP: - case BAT_CTRL: - case BTEMP_BALL: - case ACC_DETECT1: - case ADC_AUX1: - case ADC_AUX2: - /* For some reason we don't have calibrated data */ - if (!gpadc->cal_data[ADC_INPUT_BTEMP].gain) { - res = ADC_CH_BTEMP_MIN + (ADC_CH_BTEMP_MAX - - ADC_CH_BTEMP_MIN) * ad_value / - ADC_RESOLUTION; - break; - } - /* Here we can use the calibrated data */ - res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_BTEMP].gain + - gpadc->cal_data[ADC_INPUT_BTEMP].offset) / CALIB_SCALE; - break; - - case MAIN_BAT_V: - case VBAT_TRUE_MEAS: - /* For some reason we don't have calibrated data */ - if (!gpadc->cal_data[ADC_INPUT_VBAT].gain) { - res = ADC_CH_VBAT_MIN + (ADC_CH_VBAT_MAX - - ADC_CH_VBAT_MIN) * ad_value / - ADC_RESOLUTION; - break; - } - /* Here we can use the calibrated data */ - res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_VBAT].gain + - gpadc->cal_data[ADC_INPUT_VBAT].offset) / CALIB_SCALE; - break; - - case DIE_TEMP: - res = ADC_CH_DIETEMP_MIN + - (ADC_CH_DIETEMP_MAX - ADC_CH_DIETEMP_MIN) * ad_value / - ADC_RESOLUTION; - break; - - case ACC_DETECT2: - res = ADC_CH_ACCDET2_MIN + - (ADC_CH_ACCDET2_MAX - ADC_CH_ACCDET2_MIN) * ad_value / - ADC_RESOLUTION; - break; - - case VBUS_V: - res = ADC_CH_CHG_V_MIN + - (ADC_CH_CHG_V_MAX - ADC_CH_CHG_V_MIN) * ad_value / - ADC_RESOLUTION; - break; - - case MAIN_CHARGER_C: - case USB_CHARGER_C: - res = ADC_CH_CHG_I_MIN + - (ADC_CH_CHG_I_MAX - ADC_CH_CHG_I_MIN) * ad_value / - ADC_RESOLUTION; - break; - - case BK_BAT_V: - res = ADC_CH_BKBAT_MIN + - (ADC_CH_BKBAT_MAX - ADC_CH_BKBAT_MIN) * ad_value / - ADC_RESOLUTION; - break; - - case IBAT_VIRTUAL_CHANNEL: - /* For some reason we don't have calibrated data */ - if (!gpadc->cal_data[ADC_INPUT_IBAT].gain) { - res = ADC_CH_IBAT_MIN + (ADC_CH_IBAT_MAX - - ADC_CH_IBAT_MIN) * ad_value / - ADC_RESOLUTION; - break; - } - /* Here we can use the calibrated data */ - res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_IBAT].gain + - gpadc->cal_data[ADC_INPUT_IBAT].offset) - >> CALIB_SHIFT_IBAT; - break; - - default: - dev_err(gpadc->dev, - "unknown channel, not possible to convert\n"); - res = -EINVAL; - break; - - } - return res; -} -EXPORT_SYMBOL(ab8500_gpadc_ad_to_voltage); - -/** - * ab8500_gpadc_sw_hw_convert() - gpadc conversion - * @channel: analog channel to be converted to digital data - * @avg_sample: number of ADC sample to average - * @trig_egde: selected ADC trig edge - * @trig_timer: selected ADC trigger delay timer - * @conv_type: selected conversion type (HW or SW conversion) - * - * This function converts the selected analog i/p to digital - * data. - */ -int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel, - u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type) -{ - int ad_value; - int voltage; - - ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample, - trig_edge, trig_timer, conv_type); - - /* On failure retry a second time */ - if (ad_value < 0) - ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample, - trig_edge, trig_timer, conv_type); - if (ad_value < 0) { - dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n", - channel); - return ad_value; - } - - voltage = ab8500_gpadc_ad_to_voltage(gpadc, channel, ad_value); - if (voltage < 0) - dev_err(gpadc->dev, - "GPADC to voltage conversion failed ch: %d AD: 0x%x\n", - channel, ad_value); - - return voltage; -} -EXPORT_SYMBOL(ab8500_gpadc_sw_hw_convert); - -/** - * ab8500_gpadc_read_raw() - gpadc read - * @channel: analog channel to be read - * @avg_sample: number of ADC sample to average - * @trig_edge: selected trig edge - * @trig_timer: selected ADC trigger delay timer - * @conv_type: selected conversion type (HW or SW conversion) - * - * This function obtains the raw ADC value for an hardware conversion, - * this then needs to be converted by calling ab8500_gpadc_ad_to_voltage() - */ -int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel, - u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type) -{ - return ab8500_gpadc_double_read_raw(gpadc, channel, avg_sample, - trig_edge, trig_timer, conv_type, - NULL); -} - -int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel, - u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type, - int *ibat) -{ - int ret; - int looplimit = 0; - unsigned long completion_timeout; - u8 val, low_data, high_data, low_data2, high_data2; - u8 val_reg1 = 0; - unsigned int delay_min = 0; - unsigned int delay_max = 0; - u8 data_low_addr, data_high_addr; - - if (!gpadc) - return -ENODEV; - - /* check if convertion is supported */ - if ((gpadc->irq_sw < 0) && (conv_type == ADC_SW)) - return -ENOTSUPP; - if ((gpadc->irq_hw < 0) && (conv_type == ADC_HW)) - return -ENOTSUPP; - - mutex_lock(&gpadc->ab8500_gpadc_lock); - /* Enable VTVout LDO this is required for GPADC */ - pm_runtime_get_sync(gpadc->dev); - - /* Check if ADC is not busy, lock and proceed */ - do { - ret = abx500_get_register_interruptible(gpadc->dev, - AB8500_GPADC, AB8500_GPADC_STAT_REG, &val); - if (ret < 0) - goto out; - if (!(val & GPADC_BUSY)) - break; - msleep(20); - } while (++looplimit < 10); - if (looplimit >= 10 && (val & GPADC_BUSY)) { - dev_err(gpadc->dev, "gpadc_conversion: GPADC busy"); - ret = -EINVAL; - goto out; - } - - /* Enable GPADC */ - val_reg1 |= EN_GPADC; - - /* Select the channel source and set average samples */ - switch (avg_sample) { - case SAMPLE_1: - val = channel | AVG_1; - break; - case SAMPLE_4: - val = channel | AVG_4; - break; - case SAMPLE_8: - val = channel | AVG_8; - break; - default: - val = channel | AVG_16; - break; - } - - if (conv_type == ADC_HW) { - ret = abx500_set_register_interruptible(gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL3_REG, val); - val_reg1 |= EN_TRIG_EDGE; - if (trig_edge) - val_reg1 |= EN_FALLING; - } else - ret = abx500_set_register_interruptible(gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL2_REG, val); - if (ret < 0) { - dev_err(gpadc->dev, - "gpadc_conversion: set avg samples failed\n"); - goto out; - } - - /* - * Enable ADC, buffering, select rising edge and enable ADC path - * charging current sense if it needed, ABB 3.0 needs some special - * treatment too. - */ - switch (channel) { - case MAIN_CHARGER_C: - case USB_CHARGER_C: - val_reg1 |= EN_BUF | EN_ICHAR; - break; - case BTEMP_BALL: - if (!is_ab8500_2p0_or_earlier(gpadc->parent)) { - val_reg1 |= EN_BUF | BTEMP_PULL_UP; - /* - * Delay might be needed for ABB8500 cut 3.0, if not, - * remove when hardware will be availible - */ - delay_min = 1000; /* Delay in micro seconds */ - delay_max = 10000; /* large range optimises sleepmode */ - break; - } - /* Intentional fallthrough */ - default: - val_reg1 |= EN_BUF; - break; - } - - /* Write configuration to register */ - ret = abx500_set_register_interruptible(gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL1_REG, val_reg1); - if (ret < 0) { - dev_err(gpadc->dev, - "gpadc_conversion: set Control register failed\n"); - goto out; - } - - if (delay_min != 0) - usleep_range(delay_min, delay_max); - - if (conv_type == ADC_HW) { - /* Set trigger delay timer */ - ret = abx500_set_register_interruptible(gpadc->dev, - AB8500_GPADC, AB8500_GPADC_AUTO_TIMER_REG, trig_timer); - if (ret < 0) { - dev_err(gpadc->dev, - "gpadc_conversion: trig timer failed\n"); - goto out; - } - completion_timeout = 2 * HZ; - data_low_addr = AB8500_GPADC_AUTODATAL_REG; - data_high_addr = AB8500_GPADC_AUTODATAH_REG; - } else { - /* Start SW conversion */ - ret = abx500_mask_and_set_register_interruptible(gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL1_REG, - ADC_SW_CONV, ADC_SW_CONV); - if (ret < 0) { - dev_err(gpadc->dev, - "gpadc_conversion: start s/w conv failed\n"); - goto out; - } - completion_timeout = msecs_to_jiffies(CONVERSION_TIME); - data_low_addr = AB8500_GPADC_MANDATAL_REG; - data_high_addr = AB8500_GPADC_MANDATAH_REG; - } - - /* wait for completion of conversion */ - if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete, - completion_timeout)) { - dev_err(gpadc->dev, - "timeout didn't receive GPADC conv interrupt\n"); - ret = -EINVAL; - goto out; - } - - /* Read the converted RAW data */ - ret = abx500_get_register_interruptible(gpadc->dev, - AB8500_GPADC, data_low_addr, &low_data); - if (ret < 0) { - dev_err(gpadc->dev, "gpadc_conversion: read low data failed\n"); - goto out; - } - - ret = abx500_get_register_interruptible(gpadc->dev, - AB8500_GPADC, data_high_addr, &high_data); - if (ret < 0) { - dev_err(gpadc->dev, "gpadc_conversion: read high data failed\n"); - goto out; - } - - /* Check if double convertion is required */ - if ((channel == BAT_CTRL_AND_IBAT) || - (channel == VBAT_MEAS_AND_IBAT) || - (channel == VBAT_TRUE_MEAS_AND_IBAT) || - (channel == BAT_TEMP_AND_IBAT)) { - - if (conv_type == ADC_HW) { - /* not supported */ - ret = -ENOTSUPP; - dev_err(gpadc->dev, - "gpadc_conversion: only SW double conversion supported\n"); - goto out; - } else { - /* Read the converted RAW data 2 */ - ret = abx500_get_register_interruptible(gpadc->dev, - AB8500_GPADC, AB8540_GPADC_MANDATA2L_REG, - &low_data2); - if (ret < 0) { - dev_err(gpadc->dev, - "gpadc_conversion: read sw low data 2 failed\n"); - goto out; - } - - ret = abx500_get_register_interruptible(gpadc->dev, - AB8500_GPADC, AB8540_GPADC_MANDATA2H_REG, - &high_data2); - if (ret < 0) { - dev_err(gpadc->dev, - "gpadc_conversion: read sw high data 2 failed\n"); - goto out; - } - if (ibat != NULL) { - *ibat = (high_data2 << 8) | low_data2; - } else { - dev_warn(gpadc->dev, - "gpadc_conversion: ibat not stored\n"); - } - - } - } - - /* Disable GPADC */ - ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC, - AB8500_GPADC_CTRL1_REG, DIS_GPADC); - if (ret < 0) { - dev_err(gpadc->dev, "gpadc_conversion: disable gpadc failed\n"); - goto out; - } - - /* Disable VTVout LDO this is required for GPADC */ - pm_runtime_mark_last_busy(gpadc->dev); - pm_runtime_put_autosuspend(gpadc->dev); - - mutex_unlock(&gpadc->ab8500_gpadc_lock); - - return (high_data << 8) | low_data; - -out: - /* - * It has shown to be needed to turn off the GPADC if an error occurs, - * otherwise we might have problem when waiting for the busy bit in the - * GPADC status register to go low. In V1.1 there wait_for_completion - * seems to timeout when waiting for an interrupt.. Not seen in V2.0 - */ - (void) abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC, - AB8500_GPADC_CTRL1_REG, DIS_GPADC); - pm_runtime_put(gpadc->dev); - mutex_unlock(&gpadc->ab8500_gpadc_lock); - dev_err(gpadc->dev, - "gpadc_conversion: Failed to AD convert channel %d\n", channel); - return ret; -} -EXPORT_SYMBOL(ab8500_gpadc_read_raw); - -/** - * ab8500_bm_gpadcconvend_handler() - isr for gpadc conversion completion - * @irq: irq number - * @data: pointer to the data passed during request irq - * - * This is a interrupt service routine for gpadc conversion completion. - * Notifies the gpadc completion is completed and the converted raw value - * can be read from the registers. - * Returns IRQ status(IRQ_HANDLED) - */ -static irqreturn_t ab8500_bm_gpadcconvend_handler(int irq, void *_gpadc) -{ - struct ab8500_gpadc *gpadc = _gpadc; - - complete(&gpadc->ab8500_gpadc_complete); - - return IRQ_HANDLED; -} - -static int otp_cal_regs[] = { - AB8500_GPADC_CAL_1, - AB8500_GPADC_CAL_2, - AB8500_GPADC_CAL_3, - AB8500_GPADC_CAL_4, - AB8500_GPADC_CAL_5, - AB8500_GPADC_CAL_6, - AB8500_GPADC_CAL_7, -}; - -static int otp4_cal_regs[] = { - AB8540_GPADC_OTP4_REG_7, - AB8540_GPADC_OTP4_REG_6, - AB8540_GPADC_OTP4_REG_5, -}; - -static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc) -{ - int i; - int ret[ARRAY_SIZE(otp_cal_regs)]; - u8 gpadc_cal[ARRAY_SIZE(otp_cal_regs)]; - int ret_otp4[ARRAY_SIZE(otp4_cal_regs)]; - u8 gpadc_otp4[ARRAY_SIZE(otp4_cal_regs)]; - int vmain_high, vmain_low; - int btemp_high, btemp_low; - int vbat_high, vbat_low; - int ibat_high, ibat_low; - s64 V_gain, V_offset, V2A_gain, V2A_offset; - struct ab8500 *ab8500; - - ab8500 = gpadc->parent; - - /* First we read all OTP registers and store the error code */ - for (i = 0; i < ARRAY_SIZE(otp_cal_regs); i++) { - ret[i] = abx500_get_register_interruptible(gpadc->dev, - AB8500_OTP_EMUL, otp_cal_regs[i], &gpadc_cal[i]); - if (ret[i] < 0) - dev_err(gpadc->dev, "%s: read otp reg 0x%02x failed\n", - __func__, otp_cal_regs[i]); - } - - /* - * The ADC calibration data is stored in OTP registers. - * The layout of the calibration data is outlined below and a more - * detailed description can be found in UM0836 - * - * vm_h/l = vmain_high/low - * bt_h/l = btemp_high/low - * vb_h/l = vbat_high/low - * - * Data bits 8500/9540: - * | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 - * |.......|.......|.......|.......|.......|.......|.......|....... - * | | vm_h9 | vm_h8 - * |.......|.......|.......|.......|.......|.......|.......|....... - * | | vm_h7 | vm_h6 | vm_h5 | vm_h4 | vm_h3 | vm_h2 - * |.......|.......|.......|.......|.......|.......|.......|....... - * | vm_h1 | vm_h0 | vm_l4 | vm_l3 | vm_l2 | vm_l1 | vm_l0 | bt_h9 - * |.......|.......|.......|.......|.......|.......|.......|....... - * | bt_h8 | bt_h7 | bt_h6 | bt_h5 | bt_h4 | bt_h3 | bt_h2 | bt_h1 - * |.......|.......|.......|.......|.......|.......|.......|....... - * | bt_h0 | bt_l4 | bt_l3 | bt_l2 | bt_l1 | bt_l0 | vb_h9 | vb_h8 - * |.......|.......|.......|.......|.......|.......|.......|....... - * | vb_h7 | vb_h6 | vb_h5 | vb_h4 | vb_h3 | vb_h2 | vb_h1 | vb_h0 - * |.......|.......|.......|.......|.......|.......|.......|....... - * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 | - * |.......|.......|.......|.......|.......|.......|.......|....... - * - * Data bits 8540: - * OTP2 - * | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 - * |.......|.......|.......|.......|.......|.......|.......|....... - * | - * |.......|.......|.......|.......|.......|.......|.......|....... - * | vm_h9 | vm_h8 | vm_h7 | vm_h6 | vm_h5 | vm_h4 | vm_h3 | vm_h2 - * |.......|.......|.......|.......|.......|.......|.......|....... - * | vm_h1 | vm_h0 | vm_l4 | vm_l3 | vm_l2 | vm_l1 | vm_l0 | bt_h9 - * |.......|.......|.......|.......|.......|.......|.......|....... - * | bt_h8 | bt_h7 | bt_h6 | bt_h5 | bt_h4 | bt_h3 | bt_h2 | bt_h1 - * |.......|.......|.......|.......|.......|.......|.......|....... - * | bt_h0 | bt_l4 | bt_l3 | bt_l2 | bt_l1 | bt_l0 | vb_h9 | vb_h8 - * |.......|.......|.......|.......|.......|.......|.......|....... - * | vb_h7 | vb_h6 | vb_h5 | vb_h4 | vb_h3 | vb_h2 | vb_h1 | vb_h0 - * |.......|.......|.......|.......|.......|.......|.......|....... - * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 | - * |.......|.......|.......|.......|.......|.......|.......|....... - * - * Data bits 8540: - * OTP4 - * | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 - * |.......|.......|.......|.......|.......|.......|.......|....... - * | | ib_h9 | ib_h8 | ib_h7 - * |.......|.......|.......|.......|.......|.......|.......|....... - * | ib_h6 | ib_h5 | ib_h4 | ib_h3 | ib_h2 | ib_h1 | ib_h0 | ib_l5 - * |.......|.......|.......|.......|.......|.......|.......|....... - * | ib_l4 | ib_l3 | ib_l2 | ib_l1 | ib_l0 | - * - * - * Ideal output ADC codes corresponding to injected input voltages - * during manufacturing is: - * - * vmain_high: Vin = 19500mV / ADC ideal code = 997 - * vmain_low: Vin = 315mV / ADC ideal code = 16 - * btemp_high: Vin = 1300mV / ADC ideal code = 985 - * btemp_low: Vin = 21mV / ADC ideal code = 16 - * vbat_high: Vin = 4700mV / ADC ideal code = 982 - * vbat_low: Vin = 2380mV / ADC ideal code = 33 - */ - - if (is_ab8540(ab8500)) { - /* Calculate gain and offset for VMAIN if all reads succeeded*/ - if (!(ret[1] < 0 || ret[2] < 0)) { - vmain_high = (((gpadc_cal[1] & 0xFF) << 2) | - ((gpadc_cal[2] & 0xC0) >> 6)); - vmain_low = ((gpadc_cal[2] & 0x3E) >> 1); - - gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi = - (u16)vmain_high; - gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo = - (u16)vmain_low; - - gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE * - (19500 - 315) / (vmain_high - vmain_low); - gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE * - 19500 - (CALIB_SCALE * (19500 - 315) / - (vmain_high - vmain_low)) * vmain_high; - } else { - gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0; - } - - /* Read IBAT calibration Data */ - for (i = 0; i < ARRAY_SIZE(otp4_cal_regs); i++) { - ret_otp4[i] = abx500_get_register_interruptible( - gpadc->dev, AB8500_OTP_EMUL, - otp4_cal_regs[i], &gpadc_otp4[i]); - if (ret_otp4[i] < 0) - dev_err(gpadc->dev, - "%s: read otp4 reg 0x%02x failed\n", - __func__, otp4_cal_regs[i]); - } - - /* Calculate gain and offset for IBAT if all reads succeeded */ - if (!(ret_otp4[0] < 0 || ret_otp4[1] < 0 || ret_otp4[2] < 0)) { - ibat_high = (((gpadc_otp4[0] & 0x07) << 7) | - ((gpadc_otp4[1] & 0xFE) >> 1)); - ibat_low = (((gpadc_otp4[1] & 0x01) << 5) | - ((gpadc_otp4[2] & 0xF8) >> 3)); - - gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi = - (u16)ibat_high; - gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo = - (u16)ibat_low; - - V_gain = ((IBAT_VDROP_H - IBAT_VDROP_L) - << CALIB_SHIFT_IBAT) / (ibat_high - ibat_low); - - V_offset = (IBAT_VDROP_H << CALIB_SHIFT_IBAT) - - (((IBAT_VDROP_H - IBAT_VDROP_L) << - CALIB_SHIFT_IBAT) / (ibat_high - ibat_low)) - * ibat_high; - /* - * Result obtained is in mV (at a scale factor), - * we need to calculate gain and offset to get mA - */ - V2A_gain = (ADC_CH_IBAT_MAX - ADC_CH_IBAT_MIN)/ - (ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V); - V2A_offset = ((ADC_CH_IBAT_MAX_V * ADC_CH_IBAT_MIN - - ADC_CH_IBAT_MAX * ADC_CH_IBAT_MIN_V) - << CALIB_SHIFT_IBAT) - / (ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V); - - gpadc->cal_data[ADC_INPUT_IBAT].gain = - V_gain * V2A_gain; - gpadc->cal_data[ADC_INPUT_IBAT].offset = - V_offset * V2A_gain + V2A_offset; - } else { - gpadc->cal_data[ADC_INPUT_IBAT].gain = 0; - } - - dev_dbg(gpadc->dev, "IBAT gain %llu offset %llu\n", - gpadc->cal_data[ADC_INPUT_IBAT].gain, - gpadc->cal_data[ADC_INPUT_IBAT].offset); - } else { - /* Calculate gain and offset for VMAIN if all reads succeeded */ - if (!(ret[0] < 0 || ret[1] < 0 || ret[2] < 0)) { - vmain_high = (((gpadc_cal[0] & 0x03) << 8) | - ((gpadc_cal[1] & 0x3F) << 2) | - ((gpadc_cal[2] & 0xC0) >> 6)); - vmain_low = ((gpadc_cal[2] & 0x3E) >> 1); - - gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi = - (u16)vmain_high; - gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo = - (u16)vmain_low; - - gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE * - (19500 - 315) / (vmain_high - vmain_low); - - gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE * - 19500 - (CALIB_SCALE * (19500 - 315) / - (vmain_high - vmain_low)) * vmain_high; - } else { - gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0; - } - } - - /* Calculate gain and offset for BTEMP if all reads succeeded */ - if (!(ret[2] < 0 || ret[3] < 0 || ret[4] < 0)) { - btemp_high = (((gpadc_cal[2] & 0x01) << 9) | - (gpadc_cal[3] << 1) | ((gpadc_cal[4] & 0x80) >> 7)); - btemp_low = ((gpadc_cal[4] & 0x7C) >> 2); - - gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_hi = (u16)btemp_high; - gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_lo = (u16)btemp_low; - - gpadc->cal_data[ADC_INPUT_BTEMP].gain = - CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low); - gpadc->cal_data[ADC_INPUT_BTEMP].offset = CALIB_SCALE * 1300 - - (CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low)) - * btemp_high; - } else { - gpadc->cal_data[ADC_INPUT_BTEMP].gain = 0; - } - - /* Calculate gain and offset for VBAT if all reads succeeded */ - if (!(ret[4] < 0 || ret[5] < 0 || ret[6] < 0)) { - vbat_high = (((gpadc_cal[4] & 0x03) << 8) | gpadc_cal[5]); - vbat_low = ((gpadc_cal[6] & 0xFC) >> 2); - - gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi = (u16)vbat_high; - gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo = (u16)vbat_low; - - gpadc->cal_data[ADC_INPUT_VBAT].gain = CALIB_SCALE * - (4700 - 2380) / (vbat_high - vbat_low); - gpadc->cal_data[ADC_INPUT_VBAT].offset = CALIB_SCALE * 4700 - - (CALIB_SCALE * (4700 - 2380) / - (vbat_high - vbat_low)) * vbat_high; - } else { - gpadc->cal_data[ADC_INPUT_VBAT].gain = 0; - } - - dev_dbg(gpadc->dev, "VMAIN gain %llu offset %llu\n", - gpadc->cal_data[ADC_INPUT_VMAIN].gain, - gpadc->cal_data[ADC_INPUT_VMAIN].offset); - - dev_dbg(gpadc->dev, "BTEMP gain %llu offset %llu\n", - gpadc->cal_data[ADC_INPUT_BTEMP].gain, - gpadc->cal_data[ADC_INPUT_BTEMP].offset); - - dev_dbg(gpadc->dev, "VBAT gain %llu offset %llu\n", - gpadc->cal_data[ADC_INPUT_VBAT].gain, - gpadc->cal_data[ADC_INPUT_VBAT].offset); -} - -#ifdef CONFIG_PM -static int ab8500_gpadc_runtime_suspend(struct device *dev) -{ - struct ab8500_gpadc *gpadc = dev_get_drvdata(dev); - - regulator_disable(gpadc->regu); - return 0; -} - -static int ab8500_gpadc_runtime_resume(struct device *dev) -{ - struct ab8500_gpadc *gpadc = dev_get_drvdata(dev); - int ret; - - ret = regulator_enable(gpadc->regu); - if (ret) - dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret); - return ret; -} -#endif - -#ifdef CONFIG_PM_SLEEP -static int ab8500_gpadc_suspend(struct device *dev) -{ - struct ab8500_gpadc *gpadc = dev_get_drvdata(dev); - - mutex_lock(&gpadc->ab8500_gpadc_lock); - - pm_runtime_get_sync(dev); - - regulator_disable(gpadc->regu); - return 0; -} - -static int ab8500_gpadc_resume(struct device *dev) -{ - struct ab8500_gpadc *gpadc = dev_get_drvdata(dev); - int ret; - - ret = regulator_enable(gpadc->regu); - if (ret) - dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret); - - pm_runtime_mark_last_busy(gpadc->dev); - pm_runtime_put_autosuspend(gpadc->dev); - - mutex_unlock(&gpadc->ab8500_gpadc_lock); - return ret; -} -#endif - -static int ab8500_gpadc_probe(struct platform_device *pdev) -{ - int ret = 0; - struct ab8500_gpadc *gpadc; - - gpadc = devm_kzalloc(&pdev->dev, - sizeof(struct ab8500_gpadc), GFP_KERNEL); - if (!gpadc) - return -ENOMEM; - - gpadc->irq_sw = platform_get_irq_byname(pdev, "SW_CONV_END"); - if (gpadc->irq_sw < 0) - dev_err(gpadc->dev, "failed to get platform sw_conv_end irq\n"); - - gpadc->irq_hw = platform_get_irq_byname(pdev, "HW_CONV_END"); - if (gpadc->irq_hw < 0) - dev_err(gpadc->dev, "failed to get platform hw_conv_end irq\n"); - - gpadc->dev = &pdev->dev; - gpadc->parent = dev_get_drvdata(pdev->dev.parent); - mutex_init(&gpadc->ab8500_gpadc_lock); - - /* Initialize completion used to notify completion of conversion */ - init_completion(&gpadc->ab8500_gpadc_complete); - - /* Register interrupts */ - if (gpadc->irq_sw >= 0) { - ret = request_threaded_irq(gpadc->irq_sw, NULL, - ab8500_bm_gpadcconvend_handler, - IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT, - "ab8500-gpadc-sw", - gpadc); - if (ret < 0) { - dev_err(gpadc->dev, - "Failed to register interrupt irq: %d\n", - gpadc->irq_sw); - goto fail; - } - } - - if (gpadc->irq_hw >= 0) { - ret = request_threaded_irq(gpadc->irq_hw, NULL, - ab8500_bm_gpadcconvend_handler, - IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT, - "ab8500-gpadc-hw", - gpadc); - if (ret < 0) { - dev_err(gpadc->dev, - "Failed to register interrupt irq: %d\n", - gpadc->irq_hw); - goto fail_irq; - } - } - - /* VTVout LDO used to power up ab8500-GPADC */ - gpadc->regu = devm_regulator_get(&pdev->dev, "vddadc"); - if (IS_ERR(gpadc->regu)) { - ret = PTR_ERR(gpadc->regu); - dev_err(gpadc->dev, "failed to get vtvout LDO\n"); - goto fail_irq; - } - - platform_set_drvdata(pdev, gpadc); - - ret = regulator_enable(gpadc->regu); - if (ret) { - dev_err(gpadc->dev, "Failed to enable vtvout LDO: %d\n", ret); - goto fail_enable; - } - - pm_runtime_set_autosuspend_delay(gpadc->dev, GPADC_AUDOSUSPEND_DELAY); - pm_runtime_use_autosuspend(gpadc->dev); - pm_runtime_set_active(gpadc->dev); - pm_runtime_enable(gpadc->dev); - - ab8500_gpadc_read_calibration_data(gpadc); - list_add_tail(&gpadc->node, &ab8500_gpadc_list); - dev_dbg(gpadc->dev, "probe success\n"); - - return 0; - -fail_enable: -fail_irq: - free_irq(gpadc->irq_sw, gpadc); - free_irq(gpadc->irq_hw, gpadc); -fail: - return ret; -} - -static int ab8500_gpadc_remove(struct platform_device *pdev) -{ - struct ab8500_gpadc *gpadc = platform_get_drvdata(pdev); - - /* remove this gpadc entry from the list */ - list_del(&gpadc->node); - /* remove interrupt - completion of Sw ADC conversion */ - if (gpadc->irq_sw >= 0) - free_irq(gpadc->irq_sw, gpadc); - if (gpadc->irq_hw >= 0) - free_irq(gpadc->irq_hw, gpadc); - - pm_runtime_get_sync(gpadc->dev); - pm_runtime_disable(gpadc->dev); - - regulator_disable(gpadc->regu); - - pm_runtime_set_suspended(gpadc->dev); - - pm_runtime_put_noidle(gpadc->dev); - - return 0; -} - -static const struct dev_pm_ops ab8500_gpadc_pm_ops = { - SET_RUNTIME_PM_OPS(ab8500_gpadc_runtime_suspend, - ab8500_gpadc_runtime_resume, - NULL) - SET_SYSTEM_SLEEP_PM_OPS(ab8500_gpadc_suspend, - ab8500_gpadc_resume) - -}; - -static struct platform_driver ab8500_gpadc_driver = { - .probe = ab8500_gpadc_probe, - .remove = ab8500_gpadc_remove, - .driver = { - .name = "ab8500-gpadc", - .pm = &ab8500_gpadc_pm_ops, - }, -}; - -static int __init ab8500_gpadc_init(void) -{ - return platform_driver_register(&ab8500_gpadc_driver); -} -subsys_initcall_sync(ab8500_gpadc_init); - -/** - * ab8540_gpadc_get_otp() - returns OTP values - * - */ -void ab8540_gpadc_get_otp(struct ab8500_gpadc *gpadc, - u16 *vmain_l, u16 *vmain_h, u16 *btemp_l, u16 *btemp_h, - u16 *vbat_l, u16 *vbat_h, u16 *ibat_l, u16 *ibat_h) -{ - *vmain_l = gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo; - *vmain_h = gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi; - *btemp_l = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_lo; - *btemp_h = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_hi; - *vbat_l = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo; - *vbat_h = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi; - *ibat_l = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo; - *ibat_h = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi; -} |