diff options
Diffstat (limited to 'drivers/mfd/Kconfig')
| -rw-r--r-- | drivers/mfd/Kconfig | 69 |
1 files changed, 37 insertions, 32 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 8b93856de432..30db49f31866 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -77,6 +77,18 @@ config MFD_AS3711 help Support for the AS3711 PMIC from AMS +config MFD_SMPRO + tristate "Ampere Computing SMpro core driver" + depends on I2C + select MFD_CORE + select REGMAP_I2C + help + Say yes here to enable SMpro driver support for Ampere's Altra + processor family. + + Ampere's Altra SMpro exposes an I2C regmap interface that can + be accessed by child devices. + config MFD_AS3722 tristate "ams AS3722 Power Management IC" select MFD_CORE @@ -547,15 +559,6 @@ config HTC_PASIC3 HTC Magician devices, respectively. Actual functionality is handled by the leds-pasic3 and ds1wm drivers. -config HTC_I2CPLD - bool "HTC I2C PLD chip support" - depends on I2C=y && GPIOLIB - help - If you say yes here you get support for the supposed CPLD - found on omap850 HTC devices like the HTC Wizard and HTC Herald. - This device provides input and output GPIOs through an I2C - interface to one or more sub-chips. - config MFD_INTEL_QUARK_I2C_GPIO tristate "Intel Quark MFD I2C GPIO" depends on PCI @@ -591,7 +594,7 @@ config INTEL_SOC_PMIC bool "Support for Crystal Cove PMIC" depends on HAS_IOMEM && I2C=y && GPIOLIB && COMMON_CLK depends on (X86 && ACPI) || COMPILE_TEST - depends on I2C_DESIGNWARE_PLATFORM=y + depends on I2C_DESIGNWARE_PLATFORM=y || COMPILE_TEST select MFD_CORE select REGMAP_I2C select REGMAP_IRQ @@ -794,7 +797,7 @@ config MFD_MAX14577 config MFD_MAX77620 bool "Maxim Semiconductor MAX77620 and MAX20024 PMIC Support" depends on I2C=y - depends on OF || COMPILE_TEST + depends on OF select MFD_CORE select REGMAP_I2C select REGMAP_IRQ @@ -809,7 +812,7 @@ config MFD_MAX77620 config MFD_MAX77650 tristate "Maxim MAX77650/77651 PMIC Support" depends on I2C - depends on OF || COMPILE_TEST + depends on OF select MFD_CORE select REGMAP_I2C select REGMAP_IRQ @@ -824,7 +827,7 @@ config MFD_MAX77650 config MFD_MAX77686 tristate "Maxim Semiconductor MAX77686/802 PMIC Support" depends on I2C - depends on OF || COMPILE_TEST + depends on OF select MFD_CORE select REGMAP_I2C select REGMAP_IRQ @@ -853,7 +856,7 @@ config MFD_MAX77693 config MFD_MAX77714 tristate "Maxim Semiconductor MAX77714 PMIC Support" depends on I2C - depends on OF || COMPILE_TEST + depends on OF select MFD_CORE select REGMAP_I2C help @@ -1010,7 +1013,7 @@ config EZX_PCAP config MFD_CPCAP tristate "Support for Motorola CPCAP" depends on SPI - depends on OF || COMPILE_TEST + depends on OF select MFD_CORE select REGMAP_SPI select REGMAP_IRQ @@ -1035,7 +1038,7 @@ config MFD_VIPERBOARD config MFD_NTXEC tristate "Netronix embedded controller (EC)" - depends on OF || COMPILE_TEST + depends on OF depends on I2C select REGMAP_I2C select MFD_CORE @@ -1231,7 +1234,7 @@ config MFD_RN5T618 config MFD_SEC_CORE tristate "Samsung Electronics PMIC Series Support" depends on I2C=y - depends on OF || COMPILE_TEST + depends on OF select MFD_CORE select REGMAP_I2C select REGMAP_IRQ @@ -1432,11 +1435,6 @@ config MFD_SYSCON Select this option to enable accessing system control registers via regmap. -config MFD_DAVINCI_VOICECODEC - tristate - select MFD_CORE - select REGMAP_MMIO - config MFD_TI_AM335X_TSCADC tristate "TI ADC / Touch Screen chip support" select MFD_CORE @@ -1448,14 +1446,6 @@ config MFD_TI_AM335X_TSCADC To compile this driver as a module, choose M here: the module will be called ti_am335x_tscadc. -config MFD_DM355EVM_MSP - bool "TI DaVinci DM355 EVM microcontroller" - depends on I2C=y && MACH_DAVINCI_DM355_EVM - help - This driver supports the MSP430 microcontroller used on these - boards. MSP430 firmware manages resets and power sequencing, - inputs from buttons and the IR remote, LEDs, an RTC, and more. - config MFD_LP3943 tristate "TI/National Semiconductor LP3943 MFD Driver" depends on I2C @@ -1499,7 +1489,7 @@ config MFD_OMAP_USB_HOST OMAP USB Host drivers. config MFD_PALMAS - bool "TI Palmas series chips" + tristate "TI Palmas series chips" select MFD_CORE select REGMAP_I2C select REGMAP_IRQ @@ -1635,6 +1625,20 @@ config MFD_TPS65218 This driver can also be built as a module. If so, the module will be called tps65218. +config MFD_TPS65219 + tristate "TI TPS65219 Power Management IC" + depends on I2C && OF + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + help + If you say yes here you get support for the TPS65219 series of Power + Management ICs. These include voltage regulators, GPIOs and + push/power button that is often used in portable devices. + + This driver can also be built as a module. If so, the module + will be called tps65219. + config MFD_TPS6586X bool "TI TPS6586x Power Management chips" depends on I2C=y @@ -2027,6 +2031,7 @@ config MFD_ROHM_BD957XMUF depends on I2C=y depends on OF select REGMAP_I2C + select REGMAP_IRQ select MFD_CORE help Select this option to get support for the ROHM BD9576MUF and @@ -2077,7 +2082,7 @@ config MFD_STPMIC1 config MFD_STMFX tristate "Support for STMicroelectronics Multi-Function eXpander (STMFX)" depends on I2C - depends on OF || COMPILE_TEST + depends on OF select MFD_CORE select REGMAP_I2C help |