summaryrefslogtreecommitdiffstats
path: root/drivers/message
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/message')
-rw-r--r--drivers/message/fusion/Kconfig17
-rw-r--r--drivers/message/fusion/Makefile1
-rw-r--r--drivers/message/fusion/mptsas.c1235
3 files changed, 1253 insertions, 0 deletions
diff --git a/drivers/message/fusion/Kconfig b/drivers/message/fusion/Kconfig
index 33f209a39cb6..1883d22cffeb 100644
--- a/drivers/message/fusion/Kconfig
+++ b/drivers/message/fusion/Kconfig
@@ -35,6 +35,23 @@ config FUSION_FC
LSIFC929X
LSIFC929XL
+config FUSION_SAS
+ tristate "Fusion MPT ScsiHost drivers for SAS"
+ depends on PCI && SCSI
+ select FUSION
+ select SCSI_SAS_ATTRS
+ ---help---
+ SCSI HOST support for a SAS host adapters.
+
+ List of supported controllers:
+
+ LSISAS1064
+ LSISAS1066
+ LSISAS1068
+ LSISAS1064E
+ LSISAS1066E
+ LSISAS1068E
+
config FUSION_MAX_SGE
int "Maximum number of scatter gather entries (16 - 128)"
depends on FUSION
diff --git a/drivers/message/fusion/Makefile b/drivers/message/fusion/Makefile
index 1d2f9db813c1..8a2e2657f4c2 100644
--- a/drivers/message/fusion/Makefile
+++ b/drivers/message/fusion/Makefile
@@ -34,5 +34,6 @@
obj-$(CONFIG_FUSION_SPI) += mptbase.o mptscsih.o mptspi.o
obj-$(CONFIG_FUSION_FC) += mptbase.o mptscsih.o mptfc.o
+obj-$(CONFIG_FUSION_SAS) += mptbase.o mptscsih.o mptsas.o
obj-$(CONFIG_FUSION_CTL) += mptctl.o
obj-$(CONFIG_FUSION_LAN) += mptlan.o
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
new file mode 100644
index 000000000000..0d9a192e1bd4
--- /dev/null
+++ b/drivers/message/fusion/mptsas.c
@@ -0,0 +1,1235 @@
+/*
+ * linux/drivers/message/fusion/mptsas.c
+ * For use with LSI Logic PCI chip/adapter(s)
+ * running LSI Logic Fusion MPT (Message Passing Technology) firmware.
+ *
+ * Copyright (c) 1999-2005 LSI Logic Corporation
+ * (mailto:mpt_linux_developer@lsil.com)
+ * Copyright (c) 2005 Dell
+ */
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; version 2 of the License.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ NO WARRANTY
+ THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ solely responsible for determining the appropriateness of using and
+ distributing the Program and assumes all risks associated with its
+ exercise of rights under this Agreement, including but not limited to
+ the risks and costs of program errors, damage to or loss of data,
+ programs or equipment, and unavailability or interruption of operations.
+
+ DISCLAIMER OF LIABILITY
+ NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/workqueue.h>
+
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport_sas.h>
+
+#include "mptbase.h"
+#include "mptscsih.h"
+
+
+#define my_NAME "Fusion MPT SAS Host driver"
+#define my_VERSION MPT_LINUX_VERSION_COMMON
+#define MYNAM "mptsas"
+
+MODULE_AUTHOR(MODULEAUTHOR);
+MODULE_DESCRIPTION(my_NAME);
+MODULE_LICENSE("GPL");
+
+static int mpt_pq_filter;
+module_param(mpt_pq_filter, int, 0);
+MODULE_PARM_DESC(mpt_pq_filter,
+ "Enable peripheral qualifier filter: enable=1 "
+ "(default=0)");
+
+static int mpt_pt_clear;
+module_param(mpt_pt_clear, int, 0);
+MODULE_PARM_DESC(mpt_pt_clear,
+ "Clear persistency table: enable=1 "
+ "(default=MPTSCSIH_PT_CLEAR=0)");
+
+static int mptsasDoneCtx = -1;
+static int mptsasTaskCtx = -1;
+static int mptsasInternalCtx = -1; /* Used only for internal commands */
+
+
+/*
+ * SAS topology structures
+ *
+ * The MPT Fusion firmware interface spreads information about the
+ * SAS topology over many manufacture pages, thus we need some data
+ * structure to collect it and process it for the SAS transport class.
+ */
+
+struct mptsas_devinfo {
+ u16 handle; /* unique id to address this device */
+ u8 phy_id; /* phy number of parent device */
+ u8 port_id; /* sas physical port this device
+ is assoc'd with */
+ u8 target; /* logical target id of this device */
+ u8 bus; /* logical bus number of this device */
+ u64 sas_address; /* WWN of this device,
+ SATA is assigned by HBA,expander */
+ u32 device_info; /* bitfield detailed info about this device */
+};
+
+struct mptsas_phyinfo {
+ u8 phy_id; /* phy index */
+ u8 port_id; /* port number this phy is part of */
+ u8 negotiated_link_rate; /* nego'd link rate for this phy */
+ u8 hw_link_rate; /* hardware max/min phys link rate */
+ u8 programmed_link_rate; /* programmed max/min phy link rate */
+ struct mptsas_devinfo identify; /* point to phy device info */
+ struct mptsas_devinfo attached; /* point to attached device info */
+ struct sas_rphy *rphy;
+};
+
+struct mptsas_portinfo {
+ struct list_head list;
+ u16 handle; /* unique id to address this */
+ u8 num_phys; /* number of phys */
+ struct mptsas_phyinfo *phy_info;
+};
+
+/*
+ * This is pretty ugly. We will be able to seriously clean it up
+ * once the DV code in mptscsih goes away and we can properly
+ * implement ->target_alloc.
+ */
+static int
+mptsas_slave_alloc(struct scsi_device *device)
+{
+ struct Scsi_Host *host = device->host;
+ MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata;
+ struct sas_rphy *rphy;
+ struct mptsas_portinfo *p;
+ VirtDevice *vdev;
+ uint target = device->id;
+ int i;
+
+ if ((vdev = hd->Targets[target]) != NULL)
+ goto out;
+
+ vdev = kmalloc(sizeof(VirtDevice), GFP_KERNEL);
+ if (!vdev) {
+ printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n",
+ hd->ioc->name, sizeof(VirtDevice));
+ return -ENOMEM;
+ }
+
+ memset(vdev, 0, sizeof(VirtDevice));
+ vdev->tflags = MPT_TARGET_FLAGS_Q_YES|MPT_TARGET_FLAGS_VALID_INQUIRY;
+ vdev->ioc_id = hd->ioc->id;
+
+ rphy = dev_to_rphy(device->sdev_target->dev.parent);
+ list_for_each_entry(p, &hd->ioc->sas_topology, list) {
+ for (i = 0; i < p->num_phys; i++) {
+ if (p->phy_info[i].attached.sas_address ==
+ rphy->identify.sas_address) {
+ vdev->target_id =
+ p->phy_info[i].attached.target;
+ vdev->bus_id = p->phy_info[i].attached.bus;
+ hd->Targets[device->id] = vdev;
+ goto out;
+ }
+ }
+ }
+
+ printk("No matching SAS device found!!\n");
+ kfree(vdev);
+ return -ENODEV;
+
+ out:
+ vdev->num_luns++;
+ device->hostdata = vdev;
+ return 0;
+}
+
+static struct scsi_host_template mptsas_driver_template = {
+ .proc_name = "mptsas",
+ .proc_info = mptscsih_proc_info,
+ .name = "MPT SPI Host",
+ .info = mptscsih_info,
+ .queuecommand = mptscsih_qcmd,
+ .slave_alloc = mptsas_slave_alloc,
+ .slave_configure = mptscsih_slave_configure,
+ .slave_destroy = mptscsih_slave_destroy,
+ .change_queue_depth = mptscsih_change_queue_depth,
+ .eh_abort_handler = mptscsih_abort,
+ .eh_device_reset_handler = mptscsih_dev_reset,
+ .eh_bus_reset_handler = mptscsih_bus_reset,
+ .eh_host_reset_handler = mptscsih_host_reset,
+ .bios_param = mptscsih_bios_param,
+ .can_queue = MPT_FC_CAN_QUEUE,
+ .this_id = -1,
+ .sg_tablesize = MPT_SCSI_SG_DEPTH,
+ .max_sectors = 8192,
+ .cmd_per_lun = 7,
+ .use_clustering = ENABLE_CLUSTERING,
+};
+
+static struct sas_function_template mptsas_transport_functions = {
+};
+
+static struct scsi_transport_template *mptsas_transport_template;
+
+#ifdef SASDEBUG
+static void mptsas_print_phy_data(MPI_SAS_IO_UNIT0_PHY_DATA *phy_data)
+{
+ printk("---- IO UNIT PAGE 0 ------------\n");
+ printk("Handle=0x%X\n",
+ le16_to_cpu(phy_data->AttachedDeviceHandle));
+ printk("Controller Handle=0x%X\n",
+ le16_to_cpu(phy_data->ControllerDevHandle));
+ printk("Port=0x%X\n", phy_data->Port);
+ printk("Port Flags=0x%X\n", phy_data->PortFlags);
+ printk("PHY Flags=0x%X\n", phy_data->PhyFlags);
+ printk("Negotiated Link Rate=0x%X\n", phy_data->NegotiatedLinkRate);
+ printk("Controller PHY Device Info=0x%X\n",
+ le32_to_cpu(phy_data->ControllerPhyDeviceInfo));
+ printk("DiscoveryStatus=0x%X\n",
+ le32_to_cpu(phy_data->DiscoveryStatus));
+ printk("\n");
+}
+
+static void mptsas_print_phy_pg0(SasPhyPage0_t *pg0)
+{
+ __le64 sas_address;
+
+ memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64));
+
+ printk("---- SAS PHY PAGE 0 ------------\n");
+ printk("Attached Device Handle=0x%X\n",
+ le16_to_cpu(pg0->AttachedDevHandle));
+ printk("SAS Address=0x%llX\n",
+ (unsigned long long)le64_to_cpu(sas_address));
+ printk("Attached PHY Identifier=0x%X\n", pg0->AttachedPhyIdentifier);
+ printk("Attached Device Info=0x%X\n",
+ le32_to_cpu(pg0->AttachedDeviceInfo));
+ printk("Programmed Link Rate=0x%X\n", pg0->ProgrammedLinkRate);
+ printk("Change Count=0x%X\n", pg0->ChangeCount);
+ printk("PHY Info=0x%X\n", le32_to_cpu(pg0->PhyInfo));
+ printk("\n");
+}
+
+static void mptsas_print_device_pg0(SasDevicePage0_t *pg0)
+{
+ __le64 sas_address;
+
+ memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64));
+
+ printk("---- SAS DEVICE PAGE 0 ---------\n");
+ printk("Handle=0x%X\n" ,le16_to_cpu(pg0->DevHandle));
+ printk("Enclosure Handle=0x%X\n", le16_to_cpu(pg0->EnclosureHandle));
+ printk("Slot=0x%X\n", le16_to_cpu(pg0->Slot));
+ printk("SAS Address=0x%llX\n", le64_to_cpu(sas_address));
+ printk("Target ID=0x%X\n", pg0->TargetID);
+ printk("Bus=0x%X\n", pg0->Bus);
+ printk("PhyNum=0x%X\n", pg0->PhyNum);
+ printk("AccessStatus=0x%X\n", le16_to_cpu(pg0->AccessStatus));
+ printk("Device Info=0x%X\n", le32_to_cpu(pg0->DeviceInfo));
+ printk("Flags=0x%X\n", le16_to_cpu(pg0->Flags));
+ printk("Physical Port=0x%X\n", pg0->PhysicalPort);
+ printk("\n");
+}
+
+static void mptsas_print_expander_pg1(SasExpanderPage1_t *pg1)
+{
+ printk("---- SAS EXPANDER PAGE 1 ------------\n");
+
+ printk("Physical Port=0x%X\n", pg1->PhysicalPort);
+ printk("PHY Identifier=0x%X\n", pg1->Phy);
+ printk("Negotiated Link Rate=0x%X\n", pg1->NegotiatedLinkRate);
+ printk("Programmed Link Rate=0x%X\n", pg1->ProgrammedLinkRate);
+ printk("Hardware Link Rate=0x%X\n", pg1->HwLinkRate);
+ printk("Owner Device Handle=0x%X\n",
+ le16_to_cpu(pg1->OwnerDevHandle));
+ printk("Attached Device Handle=0x%X\n",
+ le16_to_cpu(pg1->AttachedDevHandle));
+}
+#else
+#define mptsas_print_phy_data(phy_data) do { } while (0)
+#define mptsas_print_phy_pg0(pg0) do { } while (0)
+#define mptsas_print_device_pg0(pg0) do { } while (0)
+#define mptsas_print_expander_pg1(pg1) do { } while (0)
+#endif
+
+static int
+mptsas_sas_io_unit_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
+{
+ ConfigExtendedPageHeader_t hdr;
+ CONFIGPARMS cfg;
+ SasIOUnitPage0_t *buffer;
+ dma_addr_t dma_handle;
+ int error, i;
+
+ hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION;
+ hdr.ExtPageLength = 0;
+ hdr.PageNumber = 0;
+ hdr.Reserved1 = 0;
+ hdr.Reserved2 = 0;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
+ hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
+
+ cfg.cfghdr.ehdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.pageAddr = 0;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0; /* read */
+ cfg.timeout = 10;
+
+ error = mpt_config(ioc, &cfg);
+ if (error)
+ goto out;
+ if (!hdr.ExtPageLength) {
+ error = -ENXIO;
+ goto out;
+ }
+
+ buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+ &dma_handle);
+ if (!buffer) {
+ error = -ENOMEM;
+ goto out;
+ }
+
+ cfg.physAddr = dma_handle;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ error = mpt_config(ioc, &cfg);
+ if (error)
+ goto out_free_consistent;
+
+ port_info->num_phys = buffer->NumPhys;
+ port_info->phy_info = kcalloc(port_info->num_phys,
+ sizeof(struct mptsas_phyinfo),GFP_KERNEL);
+ if (!port_info->phy_info) {
+ error = -ENOMEM;
+ goto out_free_consistent;
+ }
+
+ for (i = 0; i < port_info->num_phys; i++) {
+ mptsas_print_phy_data(&buffer->PhyData[i]);
+ port_info->phy_info[i].phy_id = i;
+ port_info->phy_info[i].port_id =
+ buffer->PhyData[i].Port;
+ port_info->phy_info[i].negotiated_link_rate =
+ buffer->PhyData[i].NegotiatedLinkRate;
+ }
+
+ out_free_consistent:
+ pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+ buffer, dma_handle);
+ out:
+ return error;
+}
+
+static int
+mptsas_sas_phy_pg0(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
+ u32 form, u32 form_specific)
+{
+ ConfigExtendedPageHeader_t hdr;
+ CONFIGPARMS cfg;
+ SasPhyPage0_t *buffer;
+ dma_addr_t dma_handle;
+ int error;
+
+ hdr.PageVersion = MPI_SASPHY0_PAGEVERSION;
+ hdr.ExtPageLength = 0;
+ hdr.PageNumber = 0;
+ hdr.Reserved1 = 0;
+ hdr.Reserved2 = 0;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
+ hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_PHY;
+
+ cfg.cfghdr.ehdr = &hdr;
+ cfg.dir = 0; /* read */
+ cfg.timeout = 10;
+
+ /* Get Phy Pg 0 for each Phy. */
+ cfg.physAddr = -1;
+ cfg.pageAddr = form + form_specific;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+
+ error = mpt_config(ioc, &cfg);
+ if (error)
+ goto out;
+
+ if (!hdr.ExtPageLength) {
+ error = -ENXIO;
+ goto out;
+ }
+
+ buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+ &dma_handle);
+ if (!buffer) {
+ error = -ENOMEM;
+ goto out;
+ }
+
+ cfg.physAddr = dma_handle;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ error = mpt_config(ioc, &cfg);
+ if (error)
+ goto out_free_consistent;
+
+ mptsas_print_phy_pg0(buffer);
+
+ phy_info->hw_link_rate = buffer->HwLinkRate;
+ phy_info->programmed_link_rate = buffer->ProgrammedLinkRate;
+ phy_info->identify.handle = le16_to_cpu(buffer->OwnerDevHandle);
+ phy_info->attached.handle = le16_to_cpu(buffer->AttachedDevHandle);
+
+ out_free_consistent:
+ pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+ buffer, dma_handle);
+ out:
+ return error;
+}
+
+static int
+mptsas_sas_device_pg0(MPT_ADAPTER *ioc, struct mptsas_devinfo *device_info,
+ u32 form, u32 form_specific)
+{
+ ConfigExtendedPageHeader_t hdr;
+ CONFIGPARMS cfg;
+ SasDevicePage0_t *buffer;
+ dma_addr_t dma_handle;
+ __le64 sas_address;
+ int error;
+
+ hdr.PageVersion = MPI_SASDEVICE0_PAGEVERSION;
+ hdr.ExtPageLength = 0;
+ hdr.PageNumber = 0;
+ hdr.Reserved1 = 0;
+ hdr.Reserved2 = 0;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
+ hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE;
+
+ cfg.cfghdr.ehdr = &hdr;
+ cfg.pageAddr = form + form_specific;
+ cfg.physAddr = -1;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0; /* read */
+ cfg.timeout = 10;
+
+ error = mpt_config(ioc, &cfg);
+ if (error)
+ goto out;
+ if (!hdr.ExtPageLength) {
+ error = -ENXIO;
+ goto out;
+ }
+
+ buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+ &dma_handle);
+ if (!buffer) {
+ error = -ENOMEM;
+ goto out;
+ }
+
+ cfg.physAddr = dma_handle;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ error = mpt_config(ioc, &cfg);
+ if (error)
+ goto out_free_consistent;
+
+ mptsas_print_device_pg0(buffer);
+
+ device_info->handle = le16_to_cpu(buffer->DevHandle);
+ device_info->phy_id = buffer->PhyNum;
+ device_info->port_id = buffer->PhysicalPort;
+ device_info->target = buffer->TargetID;
+ device_info->bus = buffer->Bus;
+ memcpy(&sas_address, &buffer->SASAddress, sizeof(__le64));
+ device_info->sas_address = le64_to_cpu(sas_address);
+ device_info->device_info =
+ le32_to_cpu(buffer->DeviceInfo);
+
+ out_free_consistent:
+ pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+ buffer, dma_handle);
+ out:
+ return error;
+}
+
+static int
+mptsas_sas_expander_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info,
+ u32 form, u32 form_specific)
+{
+ ConfigExtendedPageHeader_t hdr;
+ CONFIGPARMS cfg;
+ SasExpanderPage0_t *buffer;
+ dma_addr_t dma_handle;
+ int error;
+
+ hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION;
+ hdr.ExtPageLength = 0;
+ hdr.PageNumber = 0;
+ hdr.Reserved1 = 0;
+ hdr.Reserved2 = 0;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
+ hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER;
+
+ cfg.cfghdr.ehdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.pageAddr = form + form_specific;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0; /* read */
+ cfg.timeout = 10;
+
+ error = mpt_config(ioc, &cfg);
+ if (error)
+ goto out;
+
+ if (!hdr.ExtPageLength) {
+ error = -ENXIO;
+ goto out;
+ }
+
+ buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+ &dma_handle);
+ if (!buffer) {
+ error = -ENOMEM;
+ goto out;
+ }
+
+ cfg.physAddr = dma_handle;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ error = mpt_config(ioc, &cfg);
+ if (error)
+ goto out_free_consistent;
+
+ /* save config data */
+ port_info->num_phys = buffer->NumPhys;
+ port_info->handle = le16_to_cpu(buffer->DevHandle);
+ port_info->phy_info = kcalloc(port_info->num_phys,
+ sizeof(struct mptsas_phyinfo),GFP_KERNEL);
+ if (!port_info->phy_info) {
+ error = -ENOMEM;
+ goto out_free_consistent;
+ }
+
+ out_free_consistent:
+ pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+ buffer, dma_handle);
+ out:
+ return error;
+}
+
+static int
+mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
+ u32 form, u32 form_specific)
+{
+ ConfigExtendedPageHeader_t hdr;
+ CONFIGPARMS cfg;
+ SasExpanderPage1_t *buffer;
+ dma_addr_t dma_handle;
+ int error;
+
+ hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION;
+ hdr.ExtPageLength = 0;
+ hdr.PageNumber = 1;
+ hdr.Reserved1 = 0;
+ hdr.Reserved2 = 0;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
+ hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER;
+
+ cfg.cfghdr.ehdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.pageAddr = form + form_specific;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0; /* read */
+ cfg.timeout = 10;
+
+ error = mpt_config(ioc, &cfg);
+ if (error)
+ goto out;
+
+ if (!hdr.ExtPageLength) {
+ error = -ENXIO;
+ goto out;
+ }
+
+ buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+ &dma_handle);
+ if (!buffer) {
+ error = -ENOMEM;
+ goto out;
+ }
+
+ cfg.physAddr = dma_handle;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ error = mpt_config(ioc, &cfg);
+ if (error)
+ goto out_free_consistent;
+
+
+ mptsas_print_expander_pg1(buffer);
+
+ /* save config data */
+ phy_info->phy_id = buffer->Phy;
+ phy_info->port_id = buffer->PhysicalPort;
+ phy_info->negotiated_link_rate = buffer->NegotiatedLinkRate;
+ phy_info->programmed_link_rate = buffer->ProgrammedLinkRate;
+ phy_info->hw_link_rate = buffer->HwLinkRate;
+ phy_info->identify.handle = le16_to_cpu(buffer->OwnerDevHandle);
+ phy_info->attached.handle = le16_to_cpu(buffer->AttachedDevHandle);
+
+
+ out_free_consistent:
+ pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+ buffer, dma_handle);
+ out:
+ return error;
+}
+
+static void
+mptsas_parse_device_info(struct sas_identify *identify,
+ struct mptsas_devinfo *device_info)
+{
+ u16 protocols;
+
+ identify->sas_address = device_info->sas_address;
+ identify->phy_identifier = device_info->phy_id;
+
+ /*
+ * Fill in Phy Initiator Port Protocol.
+ * Bits 6:3, more than one bit can be set, fall through cases.
+ */
+ protocols = device_info->device_info & 0x78;
+ identify->initiator_port_protocols = 0;
+ if (protocols & MPI_SAS_DEVICE_INFO_SSP_INITIATOR)
+ identify->initiator_port_protocols |= SAS_PROTOCOL_SSP;
+ if (protocols & MPI_SAS_DEVICE_INFO_STP_INITIATOR)
+ identify->initiator_port_protocols |= SAS_PROTOCOL_STP;
+ if (protocols & MPI_SAS_DEVICE_INFO_SMP_INITIATOR)
+ identify->initiator_port_protocols |= SAS_PROTOCOL_SMP;
+ if (protocols & MPI_SAS_DEVICE_INFO_SATA_HOST)
+ identify->initiator_port_protocols |= SAS_PROTOCOL_SATA;
+
+ /*
+ * Fill in Phy Target Port Protocol.
+ * Bits 10:7, more than one bit can be set, fall through cases.
+ */
+ protocols = device_info->device_info & 0x780;
+ identify->target_port_protocols = 0;
+ if (protocols & MPI_SAS_DEVICE_INFO_SSP_TARGET)
+ identify->target_port_protocols |= SAS_PROTOCOL_SSP;
+ if (protocols & MPI_SAS_DEVICE_INFO_STP_TARGET)
+ identify->target_port_protocols |= SAS_PROTOCOL_STP;
+ if (protocols & MPI_SAS_DEVICE_INFO_SMP_TARGET)
+ identify->target_port_protocols |= SAS_PROTOCOL_SMP;
+ if (protocols & MPI_SAS_DEVICE_INFO_SATA_DEVICE)
+ identify->target_port_protocols |= SAS_PROTOCOL_SATA;
+
+ /*
+ * Fill in Attached device type.
+ */
+ switch (device_info->device_info &
+ MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE) {
+ case MPI_SAS_DEVICE_INFO_NO_DEVICE:
+ identify->device_type = SAS_PHY_UNUSED;
+ break;
+ case MPI_SAS_DEVICE_INFO_END_DEVICE:
+ identify->device_type = SAS_END_DEVICE;
+ break;
+ case MPI_SAS_DEVICE_INFO_EDGE_EXPANDER:
+ identify->device_type = SAS_EDGE_EXPANDER_DEVICE;
+ break;
+ case MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER:
+ identify->device_type = SAS_FANOUT_EXPANDER_DEVICE;
+ break;
+ }
+}
+
+static int mptsas_probe_one_phy(struct device *dev,
+ struct mptsas_phyinfo *phy_info, int index)
+{
+ struct sas_phy *port;
+ int error;
+
+ port = sas_phy_alloc(dev, index);
+ if (!port)
+ return -ENOMEM;
+
+ port->port_identifier = phy_info->port_id;
+ mptsas_parse_device_info(&port->identify, &phy_info->identify);
+
+ /*
+ * Set Negotiated link rate.
+ */
+ switch (phy_info->negotiated_link_rate) {
+ case MPI_SAS_IOUNIT0_RATE_PHY_DISABLED:
+ port->negotiated_linkrate = SAS_PHY_DISABLED;
+ break;
+ case MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION:
+ port->negotiated_linkrate = SAS_LINK_RATE_FAILED;
+ break;
+ case MPI_SAS_IOUNIT0_RATE_1_5:
+ port->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS;
+ break;
+ case MPI_SAS_IOUNIT0_RATE_3_0:
+ port->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS;
+ break;
+ case MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE:
+ case MPI_SAS_IOUNIT0_RATE_UNKNOWN:
+ default:
+ port->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
+ break;
+ }
+
+ /*
+ * Set Max hardware link rate.
+ */
+ switch (phy_info->hw_link_rate & MPI_SAS_PHY0_PRATE_MAX_RATE_MASK) {
+ case MPI_SAS_PHY0_HWRATE_MAX_RATE_1_5:
+ port->maximum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+ break;
+ case MPI_SAS_PHY0_PRATE_MAX_RATE_3_0:
+ port->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
+ break;
+ default:
+ break;
+ }
+
+ /*
+ * Set Max programmed link rate.
+ */
+ switch (phy_info->programmed_link_rate &
+ MPI_SAS_PHY0_PRATE_MAX_RATE_MASK) {
+ case MPI_SAS_PHY0_PRATE_MAX_RATE_1_5:
+ port->maximum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+ break;
+ case MPI_SAS_PHY0_PRATE_MAX_RATE_3_0:
+ port->maximum_linkrate = SAS_LINK_RATE_3_0_GBPS;
+ break;
+ default:
+ break;
+ }
+
+ /*
+ * Set Min hardware link rate.
+ */
+ switch (phy_info->hw_link_rate & MPI_SAS_PHY0_HWRATE_MIN_RATE_MASK) {
+ case MPI_SAS_PHY0_HWRATE_MIN_RATE_1_5:
+ port->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+ break;
+ case MPI_SAS_PHY0_PRATE_MIN_RATE_3_0:
+ port->minimum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
+ break;
+ default:
+ break;
+ }
+
+ /*
+ * Set Min programmed link rate.
+ */
+ switch (phy_info->programmed_link_rate &
+ MPI_SAS_PHY0_PRATE_MIN_RATE_MASK) {
+ case MPI_SAS_PHY0_PRATE_MIN_RATE_1_5:
+ port->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+ break;
+ case MPI_SAS_PHY0_PRATE_MIN_RATE_3_0:
+ port->minimum_linkrate = SAS_LINK_RATE_3_0_GBPS;
+ break;
+ default:
+ break;
+ }
+
+ error = sas_phy_add(port);
+ if (error) {
+ sas_phy_free(port);
+ return error;
+ }
+
+ if (phy_info->attached.handle) {
+ struct sas_rphy *rphy;
+
+ rphy = sas_rphy_alloc(port);
+ if (!rphy)
+ return 0; /* non-fatal: an rphy can be added later */
+
+ mptsas_parse_device_info(&rphy->identify, &phy_info->attached);
+ error = sas_rphy_add(rphy);
+ if (error) {
+ sas_rphy_free(rphy);
+ return error;
+ }
+
+ phy_info->rphy = rphy;
+ }
+
+ return 0;
+}
+
+static int
+mptsas_probe_hba_phys(MPT_ADAPTER *ioc, int *index)
+{
+ struct mptsas_portinfo *port_info;
+ u32 handle = 0xFFFF;
+ int error = -ENOMEM, i;
+
+ port_info = kmalloc(sizeof(*port_info), GFP_KERNEL);
+ if (!port_info)
+ goto out;
+ memset(port_info, 0, sizeof(*port_info));
+
+ error = mptsas_sas_io_unit_pg0(ioc, port_info);
+ if (error)
+ goto out_free_port_info;
+
+ list_add_tail(&port_info->list, &ioc->sas_topology);
+
+ for (i = 0; i < port_info->num_phys; i++) {
+ mptsas_sas_phy_pg0(ioc, &port_info->phy_info[i],
+ (MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER <<
+ MPI_SAS_PHY_PGAD_FORM_SHIFT), i);
+
+ mptsas_sas_device_pg0(ioc, &port_info->phy_info[i].identify,
+ (MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE <<
+ MPI_SAS_DEVICE_PGAD_FORM_SHIFT), handle);
+ handle = port_info->phy_info[i].identify.handle;
+
+ if (port_info->phy_info[i].attached.handle) {
+ mptsas_sas_device_pg0(ioc,
+ &port_info->phy_info[i].attached,
+ (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
+ MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+ port_info->phy_info[i].attached.handle);
+ }
+
+ mptsas_probe_one_phy(&ioc->sh->shost_gendev,
+ &port_info->phy_info[i], *index);
+ (*index)++;
+ }
+
+ return 0;
+
+ out_free_port_info:
+ kfree(port_info);
+ out:
+ return error;
+}
+
+static int
+mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle, int *index)
+{
+ struct mptsas_portinfo *port_info, *p;
+ int error = -ENOMEM, i, j;
+
+ port_info = kmalloc(sizeof(*port_info), GFP_KERNEL);
+ if (!port_info)
+ goto out;
+ memset(port_info, 0, sizeof(*port_info));
+
+ error = mptsas_sas_expander_pg0(ioc, port_info,
+ (MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE <<
+ MPI_SAS_EXPAND_PGAD_FORM_SHIFT), *handle);
+ if (error)
+ goto out_free_port_info;
+
+ *handle = port_info->handle;
+
+ list_add_tail(&port_info->list, &ioc->sas_topology);
+ for (i = 0; i < port_info->num_phys; i++) {
+ struct device *parent;
+
+ mptsas_sas_expander_pg1(ioc, &port_info->phy_info[i],
+ (MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM <<
+ MPI_SAS_EXPAND_PGAD_FORM_SHIFT), (i << 16) + *handle);
+
+ if (port_info->phy_info[i].identify.handle) {
+ mptsas_sas_device_pg0(ioc,
+ &port_info->phy_info[i].identify,
+ (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
+ MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+ port_info->phy_info[i].identify.handle);
+ }
+
+ if (port_info->phy_info[i].attached.handle) {
+ mptsas_sas_device_pg0(ioc,
+ &port_info->phy_info[i].attached,
+ (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
+ MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+ port_info->phy_info[i].attached.handle);
+ }
+
+ /*
+ * If we find a parent port handle this expander is
+ * attached to another expander, else it hangs of the
+ * HBA phys.
+ */
+ parent = &ioc->sh->shost_gendev;
+ list_for_each_entry(p, &ioc->sas_topology, list) {
+ for (j = 0; j < p->num_phys; j++) {
+ if (port_info->phy_info[i].identify.handle ==
+ p->phy_info[j].attached.handle)
+ parent = &p->phy_info[j].rphy->dev;
+ }
+ }
+
+ mptsas_probe_one_phy(parent, &port_info->phy_info[i], *index);
+ (*index)++;
+ }
+
+ return 0;
+
+ out_free_port_info:
+ kfree(port_info);
+ out:
+ return error;
+}
+
+static void
+mptsas_scan_sas_topology(MPT_ADAPTER *ioc)
+{
+ u32 handle = 0xFFFF;
+ int index = 0;
+
+ mptsas_probe_hba_phys(ioc, &index);
+ while (!mptsas_probe_expander_phys(ioc, &handle, &index))
+ ;
+}
+
+static int
+mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct Scsi_Host *sh;
+ MPT_SCSI_HOST *hd;
+ MPT_ADAPTER *ioc;
+ unsigned long flags;
+ int sz, ii;
+ int numSGE = 0;
+ int scale;
+ int ioc_cap;
+ u8 *mem;
+ int error=0;
+ int r;
+
+ r = mpt_attach(pdev,id);
+ if (r)
+ return r;
+
+ ioc = pci_get_drvdata(pdev);
+ ioc->DoneCtx = mptsasDoneCtx;
+ ioc->TaskCtx = mptsasTaskCtx;
+ ioc->InternalCtx = mptsasInternalCtx;
+
+ /* Added sanity check on readiness of the MPT adapter.
+ */
+ if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) {
+ printk(MYIOC_s_WARN_FMT
+ "Skipping because it's not operational!\n",
+ ioc->name);
+ return -ENODEV;
+ }
+
+ if (!ioc->active) {
+ printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n",
+ ioc->name);
+ return -ENODEV;
+ }
+
+ /* Sanity check - ensure at least 1 port is INITIATOR capable
+ */
+ ioc_cap = 0;
+ for (ii = 0; ii < ioc->facts.NumberOfPorts; ii++) {
+ if (ioc->pfacts[ii].ProtocolFlags &
+ MPI_PORTFACTS_PROTOCOL_INITIATOR)
+ ioc_cap++;
+ }
+
+ if (!ioc_cap) {
+ printk(MYIOC_s_WARN_FMT
+ "Skipping ioc=%p because SCSI Initiator mode "
+ "is NOT enabled!\n", ioc->name, ioc);
+ return -ENODEV;
+ }
+
+ sh = scsi_host_alloc(&mptsas_driver_template, sizeof(MPT_SCSI_HOST));
+ if (!sh) {
+ printk(MYIOC_s_WARN_FMT
+ "Unable to register controller with SCSI subsystem\n",
+ ioc->name);
+ return -1;
+ }
+
+ spin_lock_irqsave(&ioc->FreeQlock, flags);
+
+ /* Attach the SCSI Host to the IOC structure
+ */
+ ioc->sh = sh;
+
+ sh->io_port = 0;
+ sh->n_io_port = 0;
+ sh->irq = 0;
+
+ /* set 16 byte cdb's */
+ sh->max_cmd_len = 16;
+
+ sh->max_id = ioc->pfacts->MaxDevices + 1;
+
+ sh->transportt = mptsas_transport_template;
+
+ sh->max_lun = MPT_LAST_LUN + 1;
+ sh->max_channel = 0;
+ sh->this_id = ioc->pfacts[0].PortSCSIID;
+
+ /* Required entry.
+ */
+ sh->unique_id = ioc->id;
+
+ INIT_LIST_HEAD(&ioc->sas_topology);
+
+ /* Verify that we won't exceed the maximum
+ * number of chain buffers
+ * We can optimize: ZZ = req_sz/sizeof(SGE)
+ * For 32bit SGE's:
+ * numSGE = 1 + (ZZ-1)*(maxChain -1) + ZZ
+ * + (req_sz - 64)/sizeof(SGE)
+ * A slightly different algorithm is required for
+ * 64bit SGEs.
+ */
+ scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
+ if (sizeof(dma_addr_t) == sizeof(u64)) {
+ numSGE = (scale - 1) *
+ (ioc->facts.MaxChainDepth-1) + scale +
+ (ioc->req_sz - 60) / (sizeof(dma_addr_t) +
+ sizeof(u32));
+ } else {
+ numSGE = 1 + (scale - 1) *
+ (ioc->facts.MaxChainDepth-1) + scale +
+ (ioc->req_sz - 64) / (sizeof(dma_addr_t) +
+ sizeof(u32));
+ }
+
+ if (numSGE < sh->sg_tablesize) {
+ /* Reset this value */
+ dprintk((MYIOC_s_INFO_FMT
+ "Resetting sg_tablesize to %d from %d\n",
+ ioc->name, numSGE, sh->sg_tablesize));
+ sh->sg_tablesize = numSGE;
+ }
+
+ spin_unlock_irqrestore(&ioc->FreeQlock, flags);
+
+ hd = (MPT_SCSI_HOST *) sh->hostdata;
+ hd->ioc = ioc;
+
+ /* SCSI needs scsi_cmnd lookup table!
+ * (with size equal to req_depth*PtrSz!)
+ */
+ sz = ioc->req_depth * sizeof(void *);
+ mem = kmalloc(sz, GFP_ATOMIC);
+ if (mem == NULL) {
+ error = -ENOMEM;
+ goto mptsas_probe_failed;
+ }
+
+ memset(mem, 0, sz);
+ hd->ScsiLookup = (struct scsi_cmnd **) mem;
+
+ dprintk((MYIOC_s_INFO_FMT "ScsiLookup @ %p, sz=%d\n",
+ ioc->name, hd->ScsiLookup, sz));
+
+ /* Allocate memory for the device structures.
+ * A non-Null pointer at an offset
+ * indicates a device exists.
+ * max_id = 1 + maximum id (hosts.h)
+ */
+ sz = sh->max_id * sizeof(void *);
+ mem = kmalloc(sz, GFP_ATOMIC);
+ if (mem == NULL) {
+ error = -ENOMEM;
+ goto mptsas_probe_failed;
+ }
+
+ memset(mem, 0, sz);
+ hd->Targets = (VirtDevice **) mem;
+
+ dprintk((KERN_INFO
+ " Targets @ %p, sz=%d\n", hd->Targets, sz));
+
+ /* Clear the TM flags
+ */
+ hd->tmPending = 0;
+ hd->tmState = TM_STATE_NONE;
+ hd->resetPending = 0;
+ hd->abortSCpnt = NULL;
+
+ /* Clear the pointer used to store
+ * single-threaded commands, i.e., those
+ * issued during a bus scan, dv and
+ * configuration pages.
+ */
+ hd->cmdPtr = NULL;
+
+ /* Initialize this SCSI Hosts' timers
+ * To use, set the timer expires field
+ * and add_timer
+ */
+ init_timer(&hd->timer);
+ hd->timer.data = (unsigned long) hd;
+ hd->timer.function = mptscsih_timer_expired;
+
+ hd->mpt_pq_filter = mpt_pq_filter;
+ ioc->sas_data.ptClear = mpt_pt_clear;
+
+ if (ioc->sas_data.ptClear==1) {
+ mptbase_sas_persist_operation(
+ ioc, MPI_SAS_OP_CLEAR_ALL_PERSISTENT);
+ }
+
+ ddvprintk((MYIOC_s_INFO_FMT
+ "mpt_pq_filter %x mpt_pq_filter %x\n",
+ ioc->name,
+ mpt_pq_filter,
+ mpt_pq_filter));
+
+ init_waitqueue_head(&hd->scandv_waitq);
+ hd->scandv_wait_done = 0;
+ hd->last_queue_full = 0;
+
+ error = scsi_add_host(sh, &ioc->pcidev->dev);
+ if (error) {
+ dprintk((KERN_ERR MYNAM
+ "scsi_add_host failed\n"));
+ goto mptsas_probe_failed;
+ }
+
+ mptsas_scan_sas_topology(ioc);
+
+ return 0;
+
+mptsas_probe_failed:
+
+ mptscsih_remove(pdev);
+ return error;
+}
+
+static void __devexit mptsas_remove(struct pci_dev *pdev)
+{
+ MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
+ struct mptsas_portinfo *p, *n;
+
+ sas_remove_host(ioc->sh);
+
+ list_for_each_entry_safe(p, n, &ioc->sas_topology, list) {
+ list_del(&p->list);
+ kfree(p);
+ }
+
+ mptscsih_remove(pdev);
+}
+
+static struct pci_device_id mptsas_pci_table[] = {
+ { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1064,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1066,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1068,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1064E,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1066E,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1068E,
+ PCI_ANY_ID, PCI_ANY_ID },
+ {0} /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(pci, mptsas_pci_table);
+
+
+static struct pci_driver mptsas_driver = {
+ .name = "mptsas",
+ .id_table = mptsas_pci_table,
+ .probe = mptsas_probe,
+ .remove = __devexit_p(mptsas_remove),
+ .shutdown = mptscsih_shutdown,
+#ifdef CONFIG_PM
+ .suspend = mptscsih_suspend,
+ .resume = mptscsih_resume,
+#endif
+};
+
+static int __init
+mptsas_init(void)
+{
+ show_mptmod_ver(my_NAME, my_VERSION);
+
+ mptsas_transport_template =
+ sas_attach_transport(&mptsas_transport_functions);
+ if (!mptsas_transport_template)
+ return -ENODEV;
+
+ mptsasDoneCtx = mpt_register(mptscsih_io_done, MPTSAS_DRIVER);
+ mptsasTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSAS_DRIVER);
+ mptsasInternalCtx =
+ mpt_register(mptscsih_scandv_complete, MPTSAS_DRIVER);
+
+ if (mpt_event_register(mptsasDoneCtx, mptscsih_event_process) == 0) {
+ devtprintk((KERN_INFO MYNAM
+ ": Registered for IOC event notifications\n"));
+ }
+
+ if (mpt_reset_register(mptsasDoneCtx, mptscsih_ioc_reset) == 0) {
+ dprintk((KERN_INFO MYNAM
+ ": Registered for IOC reset notifications\n"));
+ }
+
+ return pci_register_driver(&mptsas_driver);
+}
+
+static void __exit
+mptsas_exit(void)
+{
+ pci_unregister_driver(&mptsas_driver);
+ sas_release_transport(mptsas_transport_template);
+
+ mpt_reset_deregister(mptsasDoneCtx);
+ mpt_event_deregister(mptsasDoneCtx);
+
+ mpt_deregister(mptsasInternalCtx);
+ mpt_deregister(mptsasTaskCtx);
+ mpt_deregister(mptsasDoneCtx);
+}
+
+module_init(mptsas_init);
+module_exit(mptsas_exit);
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 20:55:24 +0000