summaryrefslogtreecommitdiffstats
path: root/drivers/message/fusion/mptbase.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/message/fusion/mptbase.c')
-rw-r--r--drivers/message/fusion/mptbase.c416
1 files changed, 283 insertions, 133 deletions
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index d67b26378a52..8f04d37fb359 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -207,7 +207,6 @@ static int procmpt_iocinfo_read(char *buf, char **start, off_t offset,
#endif
static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
-//int mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag);
static int ProcessEventNotification(MPT_ADAPTER *ioc,
EventNotificationReply_t *evReply, int *evHandlers);
static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
@@ -374,11 +373,11 @@ mpt_fault_reset_work(struct work_struct *work)
ioc = ioc->alt_ioc;
/* rearm the timer */
- spin_lock_irqsave(&ioc->fault_reset_work_lock, flags);
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
if (ioc->reset_work_q)
queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
msecs_to_jiffies(MPT_POLLING_INTERVAL));
- spin_unlock_irqrestore(&ioc->fault_reset_work_lock, flags);
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
}
@@ -972,11 +971,15 @@ mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
/* Put Request back on FreeQ! */
spin_lock_irqsave(&ioc->FreeQlock, flags);
- mf->u.frame.linkage.arg1 = 0xdeadbeaf; /* signature to know if this mf is freed */
+ if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf)
+ goto out;
+ /* signature to know if this mf is freed */
+ mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf);
list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
#ifdef MFCNT
ioc->mfcnt--;
#endif
+ out:
spin_unlock_irqrestore(&ioc->FreeQlock, flags);
}
@@ -1731,6 +1734,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
ioc->id = mpt_ids++;
sprintf(ioc->name, "ioc%d", ioc->id);
+ dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n"));
/*
* set initial debug level
@@ -1771,7 +1775,6 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
ioc->pcidev = pdev;
- spin_lock_init(&ioc->initializing_hba_lock);
spin_lock_init(&ioc->taskmgmt_lock);
mutex_init(&ioc->internal_cmds.mutex);
@@ -1792,6 +1795,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
ioc->mfcnt = 0;
#endif
+ ioc->sh = NULL;
ioc->cached_fw = NULL;
/* Initilize SCSI Config Data structure
@@ -1808,9 +1812,8 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
/* Initialize workqueue */
INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work);
- spin_lock_init(&ioc->fault_reset_work_lock);
- snprintf(ioc->reset_work_q_name, sizeof(ioc->reset_work_q_name),
+ snprintf(ioc->reset_work_q_name, MPT_KOBJ_NAME_LEN,
"mpt_poll_%d", ioc->id);
ioc->reset_work_q =
create_singlethread_workqueue(ioc->reset_work_q_name);
@@ -1885,11 +1888,14 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
case MPI_MANUFACTPAGE_DEVID_SAS1064:
case MPI_MANUFACTPAGE_DEVID_SAS1068:
ioc->errata_flag_1064 = 1;
+ ioc->bus_type = SAS;
+ break;
case MPI_MANUFACTPAGE_DEVID_SAS1064E:
case MPI_MANUFACTPAGE_DEVID_SAS1068E:
case MPI_MANUFACTPAGE_DEVID_SAS1078:
ioc->bus_type = SAS;
+ break;
}
@@ -1933,7 +1939,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
INIT_LIST_HEAD(&ioc->fw_event_list);
spin_lock_init(&ioc->fw_event_lock);
- snprintf(ioc->fw_event_q_name, 20, "mpt/%d", ioc->id);
+ snprintf(ioc->fw_event_q_name, MPT_KOBJ_NAME_LEN, "mpt/%d", ioc->id);
ioc->fw_event_q = create_singlethread_workqueue(ioc->fw_event_q_name);
if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
@@ -2008,10 +2014,10 @@ mpt_detach(struct pci_dev *pdev)
/*
* Stop polling ioc for fault condition
*/
- spin_lock_irqsave(&ioc->fault_reset_work_lock, flags);
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
wq = ioc->reset_work_q;
ioc->reset_work_q = NULL;
- spin_unlock_irqrestore(&ioc->fault_reset_work_lock, flags);
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
cancel_delayed_work(&ioc->fault_reset_work);
destroy_workqueue(wq);
@@ -2234,12 +2240,16 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
ioc->active = 0;
if (ioc->alt_ioc) {
- if (ioc->alt_ioc->active)
+ if (ioc->alt_ioc->active ||
+ reason == MPT_HOSTEVENT_IOC_RECOVER) {
reset_alt_ioc_active = 1;
-
- /* Disable alt-IOC's reply interrupts (and FreeQ) for a bit ... */
- CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, 0xFFFFFFFF);
- ioc->alt_ioc->active = 0;
+ /* Disable alt-IOC's reply interrupts
+ * (and FreeQ) for a bit
+ **/
+ CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
+ 0xFFFFFFFF);
+ ioc->alt_ioc->active = 0;
+ }
}
hard = 1;
@@ -2260,9 +2270,11 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
}
} else {
- printk(MYIOC_s_WARN_FMT "NOT READY!\n", ioc->name);
+ printk(MYIOC_s_WARN_FMT
+ "NOT READY WARNING!\n", ioc->name);
}
- return -1;
+ ret = -1;
+ goto out;
}
/* hard_reset_done = 0 if a soft reset was performed
@@ -2272,7 +2284,9 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0)
alt_ioc_ready = 1;
else
- printk(MYIOC_s_WARN_FMT "alt_ioc not ready!\n", ioc->alt_ioc->name);
+ printk(MYIOC_s_WARN_FMT
+ ": alt-ioc Not ready WARNING!\n",
+ ioc->alt_ioc->name);
}
for (ii=0; ii<5; ii++) {
@@ -2293,7 +2307,8 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
if (alt_ioc_ready) {
if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
- "Initial Alt IocFacts failed rc=%x\n", ioc->name, rc));
+ "Initial Alt IocFacts failed rc=%x\n",
+ ioc->name, rc));
/* Retry - alt IOC was initialized once
*/
rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason);
@@ -2337,16 +2352,20 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
IRQF_SHARED, ioc->name, ioc);
if (rc < 0) {
printk(MYIOC_s_ERR_FMT "Unable to allocate "
- "interrupt %d!\n", ioc->name, ioc->pcidev->irq);
+ "interrupt %d!\n",
+ ioc->name, ioc->pcidev->irq);
if (ioc->msi_enable)
pci_disable_msi(ioc->pcidev);
- return -EBUSY;
+ ret = -EBUSY;
+ goto out;
}
irq_allocated = 1;
ioc->pci_irq = ioc->pcidev->irq;
pci_set_master(ioc->pcidev); /* ?? */
- dprintk(ioc, printk(MYIOC_s_INFO_FMT "installed at interrupt "
- "%d\n", ioc->name, ioc->pcidev->irq));
+ pci_set_drvdata(ioc->pcidev, ioc);
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+ "installed at interrupt %d\n", ioc->name,
+ ioc->pcidev->irq));
}
}
@@ -2355,17 +2374,22 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
* init as upper addresses are needed for init.
* If fails, continue with alt-ioc processing
*/
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n",
+ ioc->name));
if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0))
ret = -3;
/* May need to check/upload firmware & data here!
* If fails, continue with alt-ioc processing
*/
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n",
+ ioc->name));
if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0))
ret = -4;
// NEW!
if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) {
- printk(MYIOC_s_WARN_FMT ": alt_ioc (%d) FIFO mgmt alloc!\n",
+ printk(MYIOC_s_WARN_FMT
+ ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n",
ioc->alt_ioc->name, rc);
alt_ioc_ready = 0;
reset_alt_ioc_active = 0;
@@ -2375,8 +2399,9 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) {
alt_ioc_ready = 0;
reset_alt_ioc_active = 0;
- printk(MYIOC_s_WARN_FMT "alt_ioc (%d) init failure!\n",
- ioc->alt_ioc->name, rc);
+ printk(MYIOC_s_WARN_FMT
+ ": alt-ioc: (%d) init failure WARNING!\n",
+ ioc->alt_ioc->name, rc);
}
}
@@ -2457,8 +2482,9 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
mutex_init(&ioc->raid_data.inactive_list_mutex);
INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
- if (ioc->bus_type == SAS) {
+ switch (ioc->bus_type) {
+ case SAS:
/* clear persistency table */
if(ioc->facts.IOCExceptions &
MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) {
@@ -2472,8 +2498,15 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
*/
mpt_findImVolumes(ioc);
- } else if (ioc->bus_type == FC) {
- if ((ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) &&
+ /* Check, and possibly reset, the coalescing value
+ */
+ mpt_read_ioc_pg_1(ioc);
+
+ break;
+
+ case FC:
+ if ((ioc->pfacts[0].ProtocolFlags &
+ MPI_PORTFACTS_PROTOCOL_LAN) &&
(ioc->lan_cnfg_page0.Header.PageLength == 0)) {
/*
* Pre-fetch the ports LAN MAC address!
@@ -2482,11 +2515,14 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
(void) GetLanConfigPages(ioc);
a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
- "LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
- ioc->name, a[5], a[4], a[3], a[2], a[1], a[0]));
-
+ "LanAddr = %02X:%02X:%02X"
+ ":%02X:%02X:%02X\n",
+ ioc->name, a[5], a[4],
+ a[3], a[2], a[1], a[0]));
}
- } else {
+ break;
+
+ case SPI:
/* Get NVRAM and adapter maximums from SPP 0 and 2
*/
mpt_GetScsiPortSettings(ioc, 0);
@@ -2505,6 +2541,8 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
mpt_read_ioc_pg_1(ioc);
mpt_read_ioc_pg_4(ioc);
+
+ break;
}
GetIoUnitPage2(ioc);
@@ -2586,16 +2624,20 @@ mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev)
if (_pcidev == peer) {
/* Paranoia checks */
if (ioc->alt_ioc != NULL) {
- printk(MYIOC_s_WARN_FMT "Oops, already bound to %s!\n",
- ioc->name, ioc->alt_ioc->name);
+ printk(MYIOC_s_WARN_FMT
+ "Oops, already bound (%s <==> %s)!\n",
+ ioc->name, ioc->name, ioc->alt_ioc->name);
break;
} else if (ioc_srch->alt_ioc != NULL) {
- printk(MYIOC_s_WARN_FMT "Oops, already bound to %s!\n",
- ioc_srch->name, ioc_srch->alt_ioc->name);
+ printk(MYIOC_s_WARN_FMT
+ "Oops, already bound (%s <==> %s)!\n",
+ ioc_srch->name, ioc_srch->name,
+ ioc_srch->alt_ioc->name);
break;
}
- dprintk(ioc, printk(MYIOC_s_INFO_FMT "FOUND! binding to %s\n",
- ioc->name, ioc_srch->name));
+ dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "FOUND! binding %s <==> %s\n",
+ ioc->name, ioc->name, ioc_srch->name));
ioc_srch->alt_ioc = ioc;
ioc->alt_ioc = ioc_srch;
}
@@ -2615,8 +2657,8 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)
int ret;
if (ioc->cached_fw != NULL) {
- ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: Pushing FW onto "
- "adapter\n", __func__, ioc->name));
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: Pushing FW onto adapter\n", __func__, ioc->name));
if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)
ioc->cached_fw, CAN_SLEEP)) < 0) {
printk(MYIOC_s_WARN_FMT
@@ -2626,10 +2668,13 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)
}
/* Disable adapter interrupts! */
+ synchronize_irq(ioc->pcidev->irq);
CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
ioc->active = 0;
+
/* Clear any lingering interrupt */
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+ CHIPREG_READ32(&ioc->chip->IntStatus);
if (ioc->alloc != NULL) {
sz = ioc->alloc_sz;
@@ -2689,19 +2734,22 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)
if((ret = mpt_host_page_access_control(ioc,
MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) {
printk(MYIOC_s_ERR_FMT
- "host page buffers free failed (%d)!\n",
- ioc->name, ret);
+ ": %s: host page buffers free failed (%d)!\n",
+ ioc->name, __func__, ret);
}
- dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "HostPageBuffer free @ %p, sz=%d bytes\n",
- ioc->name, ioc->HostPageBuffer, ioc->HostPageBuffer_sz));
+ dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "HostPageBuffer free @ %p, sz=%d bytes\n",
+ ioc->name, ioc->HostPageBuffer,
+ ioc->HostPageBuffer_sz));
pci_free_consistent(ioc->pcidev, ioc->HostPageBuffer_sz,
ioc->HostPageBuffer, ioc->HostPageBuffer_dma);
ioc->HostPageBuffer = NULL;
ioc->HostPageBuffer_sz = 0;
ioc->alloc_total -= ioc->HostPageBuffer_sz;
}
-}
+ pci_set_drvdata(ioc->pcidev, NULL);
+}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mpt_adapter_dispose - Free all resources associated with an MPT adapter
@@ -2841,8 +2889,12 @@ MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
}
/* Is it already READY? */
- if (!statefault && (ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)
+ if (!statefault &&
+ ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) {
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+ "IOC is in READY state\n", ioc->name));
return 0;
+ }
/*
* Check to see if IOC is in FAULT state.
@@ -2915,8 +2967,9 @@ MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
ii++; cntdn--;
if (!cntdn) {
- printk(MYIOC_s_ERR_FMT "Wait IOC_READY state timeout(%d)!\n",
- ioc->name, (int)((ii+5)/HZ));
+ printk(MYIOC_s_ERR_FMT
+ "Wait IOC_READY state (0x%x) timeout(%d)!\n",
+ ioc->name, ioc_state, (int)((ii+5)/HZ));
return -ETIME;
}
@@ -2929,9 +2982,8 @@ MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
}
if (statefault < 3) {
- printk(MYIOC_s_INFO_FMT "Recovered from %s\n",
- ioc->name,
- statefault==1 ? "stuck handshake" : "IOC FAULT");
+ printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name,
+ statefault == 1 ? "stuck handshake" : "IOC FAULT");
}
return hard_reset_done;
@@ -2984,8 +3036,9 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
/* IOC *must* NOT be in RESET state! */
if (ioc->last_state == MPI_IOC_STATE_RESET) {
- printk(MYIOC_s_ERR_FMT "Can't get IOCFacts NOT READY! (%08x)\n",
- ioc->name, ioc->last_state );
+ printk(KERN_ERR MYNAM
+ ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n",
+ ioc->name, ioc->last_state);
return -44;
}
@@ -3047,7 +3100,7 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
* Old: u16{Major(4),Minor(4),SubMinor(8)}
* New: u32{Major(8),Minor(8),Unit(8),Dev(8)}
*/
- if (facts->MsgVersion < 0x0102) {
+ if (facts->MsgVersion < MPI_VERSION_01_02) {
/*
* Handle old FC f/w style, convert to new...
*/
@@ -3059,9 +3112,11 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
facts->ProductID = le16_to_cpu(facts->ProductID);
+
if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
> MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
ioc->ir_firmware = 1;
+
facts->CurrentHostMfaHighAddr =
le32_to_cpu(facts->CurrentHostMfaHighAddr);
facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
@@ -3077,7 +3132,7 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
* to 14 in MPI-1.01.0x.
*/
if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 &&
- facts->MsgVersion > 0x0100) {
+ facts->MsgVersion > MPI_VERSION_01_00) {
facts->FWImageSize = le32_to_cpu(facts->FWImageSize);
}
@@ -3259,6 +3314,7 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
ioc_init.MaxDevices = (U8)ioc->devices_per_bus;
ioc_init.MaxBuses = (U8)ioc->number_of_buses;
+
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n",
ioc->name, ioc->facts.MsgVersion));
if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
@@ -3273,7 +3329,7 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
}
ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */
- if (sizeof(dma_addr_t) == sizeof(u64)) {
+ if (ioc->sg_addr_size == sizeof(u64)) {
/* Save the upper 32-bits of the request
* (reply) and sense buffers.
*/
@@ -3526,29 +3582,29 @@ mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest,
reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag);
- dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Upload completed rc=%x \n", ioc->name, ii));
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed "
+ "rc=%x \n", ioc->name, ii));
cmdStatus = -EFAULT;
if (ii == 0) {
/* Handshake transfer was complete and successful.
* Check the Reply Frame.
*/
- int status, transfer_sz;
- status = le16_to_cpu(preply->IOCStatus);
- if (status == MPI_IOCSTATUS_SUCCESS) {
- transfer_sz = le32_to_cpu(preply->ActualImageSize);
- if (transfer_sz == sz)
+ int status;
+ status = le16_to_cpu(preply->IOCStatus) &
+ MPI_IOCSTATUS_MASK;
+ if (status == MPI_IOCSTATUS_SUCCESS &&
+ ioc->facts.FWImageSize ==
+ le32_to_cpu(preply->ActualImageSize))
cmdStatus = 0;
- }
}
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n",
ioc->name, cmdStatus));
if (cmdStatus) {
-
- ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": fw upload failed, freeing image \n",
- ioc->name));
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, "
+ "freeing image \n", ioc->name));
mpt_free_fw_memory(ioc);
}
kfree(prequest);
@@ -3872,6 +3928,10 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
+
+ if (!ignore)
+ return 0;
+
drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
"address=%p\n", ioc->name, __func__,
&ioc->chip->Doorbell, &ioc->chip->Reset_1078));
@@ -3889,6 +3949,7 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
"looking for READY STATE: doorbell=%x"
" count=%d\n",
ioc->name, doorbell, count));
+
if (doorbell == MPI_IOC_STATE_READY) {
return 1;
}
@@ -4039,6 +4100,10 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
doorbell &= MPI_IOC_STATE_MASK;
+ drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "looking for READY STATE: doorbell=%x"
+ " count=%d\n", ioc->name, doorbell, count));
+
if (doorbell == MPI_IOC_STATE_READY) {
break;
}
@@ -4050,6 +4115,11 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
mdelay (1000);
}
}
+
+ if (doorbell != MPI_IOC_STATE_READY)
+ printk(MYIOC_s_ERR_FMT "Failed to come READY "
+ "after reset! IocState=%x", ioc->name,
+ doorbell);
}
}
@@ -4168,8 +4238,9 @@ SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
if (sleepFlag != CAN_SLEEP)
count *= 10;
- printk(MYIOC_s_ERR_FMT "Wait IOC_READY state timeout(%d)!\n",
- ioc->name, (int)((count+5)/HZ));
+ printk(MYIOC_s_ERR_FMT
+ "Wait IOC_READY state (0x%x) timeout(%d)!\n",
+ ioc->name, state, (int)((count+5)/HZ));
return -ETIME;
}
@@ -4255,8 +4326,13 @@ initChainBuffers(MPT_ADAPTER *ioc)
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n",
ioc->name, num_sge, numSGE));
- if ( numSGE > MPT_SCSI_SG_DEPTH )
- numSGE = MPT_SCSI_SG_DEPTH;
+ if (ioc->bus_type == FC) {
+ if (numSGE > MPT_SCSI_FC_SG_DEPTH)
+ numSGE = MPT_SCSI_FC_SG_DEPTH;
+ } else {
+ if (numSGE > MPT_SCSI_SG_DEPTH)
+ numSGE = MPT_SCSI_SG_DEPTH;
+ }
num_chain = 1;
while (numSGE - num_sge > 0) {
@@ -4493,6 +4569,7 @@ PrimeIocFifos(MPT_ADAPTER *ioc)
return 0;
out_fail:
+
if (ioc->alloc != NULL) {
sz = ioc->alloc_sz;
pci_free_consistent(ioc->pcidev,
@@ -5610,17 +5687,20 @@ mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
* -ENOMEM if pci_alloc failed
**/
int
-mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t phys_disk)
+mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num,
+ RaidPhysDiskPage0_t *phys_disk)
{
- CONFIGPARMS cfg;
- ConfigPageHeader_t hdr;
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t hdr;
dma_addr_t dma_handle;
pRaidPhysDiskPage0_t buffer = NULL;
int rc;
memset(&cfg, 0 , sizeof(CONFIGPARMS));
memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+ memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t));
+ hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION;
hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
cfg.cfghdr.hdr = &hdr;
cfg.physAddr = -1;
@@ -6074,7 +6154,8 @@ mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
int ret;
u8 page_type = 0, extend_page;
unsigned long timeleft;
- int in_isr;
+ unsigned long flags;
+ int in_isr;
u8 issue_hard_reset = 0;
u8 retry_count = 0;
@@ -6086,7 +6167,17 @@ mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
dcprintk(ioc, printk(MYIOC_s_WARN_FMT "Config request not allowed in ISR context!\n",
ioc->name));
return -EPERM;
+ }
+
+ /* don't send a config page during diag reset */
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ if (ioc->ioc_reset_in_progress) {
+ dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: busy with host reset\n", ioc->name, __func__));
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+ return -EBUSY;
}
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
/* don't send if no chance of success */
if (!ioc->active ||
@@ -6270,6 +6361,12 @@ mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
MPT_MGMT_STATUS_DID_IOCRESET;
complete(&ioc->mptbase_cmds.done);
}
+/* wake up taskmgmt_cmds */
+ if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
+ ioc->taskmgmt_cmds.status |=
+ MPT_MGMT_STATUS_DID_IOCRESET;
+ complete(&ioc->taskmgmt_cmds.done);
+ }
break;
default:
break;
@@ -6690,7 +6787,9 @@ int
mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
{
int rc;
+ u8 cb_idx;
unsigned long flags;
+ unsigned long time_count;
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name));
#ifdef MFCNT
@@ -6721,30 +6820,24 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
* Prevents timeouts occurring during a diagnostic reset...very bad.
* For all other protocol drivers, this is a no-op.
*/
- {
- u8 cb_idx;
- int r = 0;
-
- for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
- if (MptResetHandlers[cb_idx]) {
- dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling IOC reset_setup handler #%d\n",
- ioc->name, cb_idx));
- r += mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
- if (ioc->alt_ioc) {
- dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling alt-%s setup reset handler #%d\n",
- ioc->name, ioc->alt_ioc->name, cb_idx));
- r += mpt_signal_reset(cb_idx, ioc->alt_ioc, MPT_IOC_SETUP_RESET);
- }
- }
+ for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
+ if (MptResetHandlers[cb_idx]) {
+ mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
+ if (ioc->alt_ioc)
+ mpt_signal_reset(cb_idx, ioc->alt_ioc,
+ MPT_IOC_SETUP_RESET);
}
}
- if ((rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag)) != 0) {
- printk(MYIOC_s_WARN_FMT "Cannot recover rc = %d!\n", ioc->name, rc);
+ time_count = jiffies;
+ rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag);
+ if (rc != 0) {
+ printk(KERN_WARNING MYNAM
+ ": WARNING - (%d) Cannot recover %s\n", rc, ioc->name);
+ } else {
+ if (ioc->hard_resets < -1)
+ ioc->hard_resets++;
}
- ioc->reload_fw = 0;
- if (ioc->alt_ioc)
- ioc->alt_ioc->reload_fw = 0;
spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
ioc->ioc_reset_in_progress = 0;
@@ -6757,16 +6850,27 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
}
spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
- dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler rc = %d!\n", ioc->name, rc));
+ dtmprintk(ioc,
+ printk(MYIOC_s_DEBUG_FMT
+ "HardResetHandler: completed (%d seconds): %s\n", ioc->name,
+ jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ?
+ "SUCCESS" : "FAILED")));
return rc;
}
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+#ifdef CONFIG_FUSION_LOGGING
static void
-EventDescriptionStr(u8 event, u32 evData0, char *evStr)
+mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
{
char *ds = NULL;
+ u32 evData0;
+ int ii;
+ u8 event;
+ char *evStr = ioc->evStr;
+
+ event = le32_to_cpu(pEventReply->Event) & 0xFF;
+ evData0 = le32_to_cpu(pEventReply->Data[0]);
switch(event) {
case MPI_EVENT_NONE:
@@ -6800,9 +6904,9 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
ds = "Loop State(LIP) Change";
else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
- ds = "Loop State(LPE) Change"; /* ??? */
+ ds = "Loop State(LPE) Change";
else
- ds = "Loop State(LPB) Change"; /* ??? */
+ ds = "Loop State(LPB) Change";
break;
case MPI_EVENT_LOGOUT:
ds = "Logout";
@@ -7002,28 +7106,53 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
}
case MPI_EVENT_IR2:
{
+ u8 id = (u8)(evData0);
+ u8 channel = (u8)(evData0 >> 8);
+ u8 phys_num = (u8)(evData0 >> 24);
u8 ReasonCode = (u8)(evData0 >> 16);
+
switch (ReasonCode) {
case MPI_EVENT_IR2_RC_LD_STATE_CHANGED:
- ds = "IR2: LD State Changed";
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: LD State Changed: "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
break;
case MPI_EVENT_IR2_RC_PD_STATE_CHANGED:
- ds = "IR2: PD State Changed";
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: PD State Changed "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
break;
case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL:
- ds = "IR2: Bad Block Table Full";
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: Bad Block Table Full: "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
break;
case MPI_EVENT_IR2_RC_PD_INSERTED:
- ds = "IR2: PD Inserted";
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: PD Inserted: "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
break;
case MPI_EVENT_IR2_RC_PD_REMOVED:
- ds = "IR2: PD Removed";
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: PD Removed: "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
break;
case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
- ds = "IR2: Foreign CFG Detected";
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: Foreign CFG Detected: "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
break;
case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR:
- ds = "IR2: Rebuild Medium Error";
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: Rebuild Medium Error: "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
break;
default:
ds = "IR2";
@@ -7059,13 +7188,18 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
{
u8 reason = (u8)(evData0);
- u8 port_num = (u8)(evData0 >> 8);
- u16 handle = le16_to_cpu(evData0 >> 16);
- snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Initiator Device Status Change: reason=0x%02x "
- "port=%d handle=0x%04x",
- reason, port_num, handle);
+ switch (reason) {
+ case MPI_EVENT_SAS_INIT_RC_ADDED:
+ ds = "SAS Initiator Status Change: Added";
+ break;
+ case MPI_EVENT_SAS_INIT_RC_REMOVED:
+ ds = "SAS Initiator Status Change: Deleted";
+ break;
+ default:
+ ds = "SAS Initiator Status Change";
+ break;
+ }
break;
}
@@ -7113,6 +7247,24 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
break;
}
+ case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
+ {
+ u8 reason = (u8)(evData0);
+
+ switch (reason) {
+ case MPI_EVENT_SAS_EXP_RC_ADDED:
+ ds = "Expander Status Change: Added";
+ break;
+ case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING:
+ ds = "Expander Status Change: Deleted";
+ break;
+ default:
+ ds = "Expander Status Change";
+ break;
+ }
+ break;
+ }
+
/*
* MPT base "custom" events may be added here...
*/
@@ -7122,8 +7274,20 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
}
if (ds)
strncpy(evStr, ds, EVENT_DESCR_STR_SZ);
-}
+
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "MPT event:(%02Xh) : %s\n",
+ ioc->name, event, evStr));
+
+ devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM
+ ": Event data:\n"));
+ for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++)
+ devtverboseprintk(ioc, printk(" %08x",
+ le32_to_cpu(pEventReply->Data[ii])));
+ devtverboseprintk(ioc, printk(KERN_DEBUG "\n"));
+}
+#endif
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* ProcessEventNotification - Route EventNotificationReply to all event handlers
@@ -7140,37 +7304,24 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply
{
u16 evDataLen;
u32 evData0 = 0;
-// u32 evCtx;
int ii;
u8 cb_idx;
int r = 0;
int handlers = 0;
- char evStr[EVENT_DESCR_STR_SZ];
u8 event;
/*
* Do platform normalization of values
*/
event = le32_to_cpu(pEventReply->Event) & 0xFF;
-// evCtx = le32_to_cpu(pEventReply->EventContext);
evDataLen = le16_to_cpu(pEventReply->EventDataLength);
if (evDataLen) {
evData0 = le32_to_cpu(pEventReply->Data[0]);
}
- EventDescriptionStr(event, evData0, evStr);
- devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "MPT event:(%02Xh) : %s\n",
- ioc->name,
- event,
- evStr));
-
#ifdef CONFIG_FUSION_LOGGING
- devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
- ": Event data:\n", ioc->name));
- for (ii = 0; ii < evDataLen; ii++)
- devtverboseprintk(ioc, printk(" %08x",
- le32_to_cpu(pEventReply->Data[ii])));
- devtverboseprintk(ioc, printk("\n"));
+ if (evDataLen)
+ mpt_display_event_info(ioc, pEventReply);
#endif
/*
@@ -7225,8 +7376,9 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply
*/
for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
if (MptEvHandlers[cb_idx]) {
- devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Routing Event to event handler #%d\n",
- ioc->name, cb_idx));
+ devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "Routing Event to event handler #%d\n",
+ ioc->name, cb_idx));
r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply);
handlers++;
}
@@ -7310,8 +7462,6 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
switch (info) {
case 0x00010000:
desc = "bug! MID not found";
- if (ioc->reload_fw == 0)
- ioc->reload_fw++;
break;
case 0x00020000: