summaryrefslogtreecommitdiffstats
path: root/drivers/media/video/au0828/au0828-cards.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/video/au0828/au0828-cards.c')
-rw-r--r--drivers/media/video/au0828/au0828-cards.c19
1 files changed, 15 insertions, 4 deletions
diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c
index 1aabaa7e55bb..053bbe8c8e3a 100644
--- a/drivers/media/video/au0828/au0828-cards.c
+++ b/drivers/media/video/au0828/au0828-cards.c
@@ -46,6 +46,7 @@ struct au0828_board au0828_boards[] = {
.name = "Hauppauge HVR850",
.tuner_type = TUNER_XC5000,
.tuner_addr = 0x61,
+ .i2c_clk_divider = AU0828_I2C_CLK_30KHZ,
.input = {
{
.type = AU0828_VMUX_TELEVISION,
@@ -70,6 +71,13 @@ struct au0828_board au0828_boards[] = {
.name = "Hauppauge HVR950Q",
.tuner_type = TUNER_XC5000,
.tuner_addr = 0x61,
+ /* The au0828 hardware i2c implementation does not properly
+ support the xc5000's i2c clock stretching. So we need to
+ lower the clock frequency enough where the 15us clock
+ stretch fits inside of a normal clock cycle, or else the
+ au0828 fails to set the STOP bit. A 30 KHz clock puts the
+ clock pulse width at 18us */
+ .i2c_clk_divider = AU0828_I2C_CLK_30KHZ,
.input = {
{
.type = AU0828_VMUX_TELEVISION,
@@ -94,16 +102,19 @@ struct au0828_board au0828_boards[] = {
.name = "Hauppauge HVR950Q rev xxF8",
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
+ .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
},
[AU0828_BOARD_DVICO_FUSIONHDTV7] = {
.name = "DViCO FusionHDTV USB",
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
+ .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
},
[AU0828_BOARD_HAUPPAUGE_WOODBURY] = {
.name = "Hauppauge Woodbury",
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
+ .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
},
};
@@ -200,8 +211,8 @@ void au0828_card_setup(struct au0828_dev *dev)
/* Load the analog demodulator driver (note this would need to
be abstracted out if we ever need to support a different
demod) */
- sd = v4l2_i2c_new_subdev(&dev->i2c_adap, "au8522", "au8522",
- 0x8e >> 1);
+ sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ "au8522", "au8522", 0x8e >> 1);
if (sd == NULL)
printk(KERN_ERR "analog subdev registration failed\n");
}
@@ -209,8 +220,8 @@ void au0828_card_setup(struct au0828_dev *dev)
/* Setup tuners */
if (dev->board.tuner_type != TUNER_ABSENT) {
/* Load the tuner module, which does the attach */
- sd = v4l2_i2c_new_subdev(&dev->i2c_adap, "tuner", "tuner",
- dev->board.tuner_addr);
+ sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ "tuner", "tuner", dev->board.tuner_addr);
if (sd == NULL)
printk(KERN_ERR "tuner subdev registration fail\n");