summaryrefslogtreecommitdiffstats
path: root/drivers/media/usb/em28xx/em28xx-i2c.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/usb/em28xx/em28xx-i2c.c')
-rw-r--r--drivers/media/usb/em28xx/em28xx-i2c.c199
1 files changed, 117 insertions, 82 deletions
diff --git a/drivers/media/usb/em28xx/em28xx-i2c.c b/drivers/media/usb/em28xx/em28xx-i2c.c
index c4ff9739a7ae..7e1724076ac4 100644
--- a/drivers/media/usb/em28xx/em28xx-i2c.c
+++ b/drivers/media/usb/em28xx/em28xx-i2c.c
@@ -26,6 +26,7 @@
#include <linux/kernel.h>
#include <linux/usb.h>
#include <linux/i2c.h>
+#include <linux/jiffies.h>
#include "em28xx.h"
#include "tuner-xc2028.h"
@@ -40,7 +41,7 @@ MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time");
static unsigned int i2c_debug;
module_param(i2c_debug, int, 0644);
-MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
+MODULE_PARM_DESC(i2c_debug, "i2c debug message level (1: normal debug, 2: show I2C transfers)");
/*
* em2800_i2c_send_bytes()
@@ -48,8 +49,8 @@ MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
*/
static int em2800_i2c_send_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len)
{
+ unsigned long timeout = jiffies + msecs_to_jiffies(EM28XX_I2C_XFER_TIMEOUT);
int ret;
- int write_timeout;
u8 b2[6];
if (len < 1 || len > 4)
@@ -74,22 +75,26 @@ static int em2800_i2c_send_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len)
return (ret < 0) ? ret : -EIO;
}
/* wait for completion */
- for (write_timeout = EM2800_I2C_XFER_TIMEOUT; write_timeout > 0;
- write_timeout -= 5) {
+ while (time_is_after_jiffies(timeout)) {
ret = dev->em28xx_read_reg(dev, 0x05);
- if (ret == 0x80 + len - 1) {
+ if (ret == 0x80 + len - 1)
return len;
- } else if (ret == 0x94 + len - 1) {
- return -ENODEV;
- } else if (ret < 0) {
+ if (ret == 0x94 + len - 1) {
+ if (i2c_debug == 1)
+ em28xx_warn("R05 returned 0x%02x: I2C timeout",
+ ret);
+ return -ENXIO;
+ }
+ if (ret < 0) {
em28xx_warn("failed to get i2c transfer status from bridge register (error=%i)\n",
ret);
return ret;
}
msleep(5);
}
- em28xx_warn("write to i2c device at 0x%x timed out\n", addr);
- return -EIO;
+ if (i2c_debug)
+ em28xx_warn("write to i2c device at 0x%x timed out\n", addr);
+ return -ETIMEDOUT;
}
/*
@@ -98,9 +103,9 @@ static int em2800_i2c_send_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len)
*/
static int em2800_i2c_recv_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len)
{
+ unsigned long timeout = jiffies + msecs_to_jiffies(EM28XX_I2C_XFER_TIMEOUT);
u8 buf2[4];
int ret;
- int read_timeout;
int i;
if (len < 1 || len > 4)
@@ -117,22 +122,28 @@ static int em2800_i2c_recv_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len)
}
/* wait for completion */
- for (read_timeout = EM2800_I2C_XFER_TIMEOUT; read_timeout > 0;
- read_timeout -= 5) {
+ while (time_is_after_jiffies(timeout)) {
ret = dev->em28xx_read_reg(dev, 0x05);
- if (ret == 0x84 + len - 1) {
+ if (ret == 0x84 + len - 1)
break;
- } else if (ret == 0x94 + len - 1) {
- return -ENODEV;
- } else if (ret < 0) {
+ if (ret == 0x94 + len - 1) {
+ if (i2c_debug == 1)
+ em28xx_warn("R05 returned 0x%02x: I2C timeout",
+ ret);
+ return -ENXIO;
+ }
+ if (ret < 0) {
em28xx_warn("failed to get i2c transfer status from bridge register (error=%i)\n",
ret);
return ret;
}
msleep(5);
}
- if (ret != 0x84 + len - 1)
- em28xx_warn("read from i2c device at 0x%x timed out\n", addr);
+ if (ret != 0x84 + len - 1) {
+ if (i2c_debug)
+ em28xx_warn("read from i2c device at 0x%x timed out\n",
+ addr);
+ }
/* get the received message */
ret = dev->em28xx_read_reg_req_len(dev, 0x00, 4-len, buf2, len);
@@ -168,7 +179,8 @@ static int em2800_i2c_check_for_device(struct em28xx *dev, u8 addr)
static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf,
u16 len, int stop)
{
- int write_timeout, ret;
+ unsigned long timeout = jiffies + msecs_to_jiffies(EM28XX_I2C_XFER_TIMEOUT);
+ int ret;
if (len < 1 || len > 64)
return -EOPNOTSUPP;
@@ -191,16 +203,19 @@ static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf,
}
}
- /* Check success of the i2c operation */
- for (write_timeout = EM2800_I2C_XFER_TIMEOUT; write_timeout > 0;
- write_timeout -= 5) {
+ /* wait for completion */
+ while (time_is_after_jiffies(timeout)) {
ret = dev->em28xx_read_reg(dev, 0x05);
- if (ret == 0) { /* success */
+ if (ret == 0) /* success */
return len;
- } else if (ret == 0x10) {
- return -ENODEV;
- } else if (ret < 0) {
- em28xx_warn("failed to read i2c transfer status from bridge (error=%i)\n",
+ if (ret == 0x10) {
+ if (i2c_debug == 1)
+ em28xx_warn("I2C transfer timeout on writing to addr 0x%02x",
+ addr);
+ return -ENXIO;
+ }
+ if (ret < 0) {
+ em28xx_warn("failed to get i2c transfer status from bridge register (error=%i)\n",
ret);
return ret;
}
@@ -211,8 +226,10 @@ static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf,
* (even with high payload) ...
*/
}
- em28xx_warn("write to i2c device at 0x%x timed out\n", addr);
- return -EIO;
+ if (i2c_debug)
+ em28xx_warn("write to i2c device at 0x%x timed out (status=%i)\n",
+ addr, ret);
+ return -ETIMEDOUT;
}
/*
@@ -242,26 +259,28 @@ static int em28xx_i2c_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, u16 len)
* bytes if we are on bus B AND there was no write attempt to the
* specified slave address before AND no device is present at the
* requested slave address.
- * Anyway, the next check will fail with -ENODEV in this case, so avoid
+ * Anyway, the next check will fail with -ENXIO in this case, so avoid
* spamming the system log on device probing and do nothing here.
*/
/* Check success of the i2c operation */
ret = dev->em28xx_read_reg(dev, 0x05);
+ if (ret == 0) /* success */
+ return len;
if (ret < 0) {
- em28xx_warn("failed to read i2c transfer status from bridge (error=%i)\n",
+ em28xx_warn("failed to get i2c transfer status from bridge register (error=%i)\n",
ret);
return ret;
}
- if (ret > 0) {
- if (ret == 0x10) {
- return -ENODEV;
- } else {
- em28xx_warn("unknown i2c error (status=%i)\n", ret);
- return -EIO;
- }
+ if (ret == 0x10) {
+ if (i2c_debug == 1)
+ em28xx_warn("I2C transfer timeout on writing to addr 0x%02x",
+ addr);
+ return -ENXIO;
}
- return len;
+
+ em28xx_warn("unknown i2c error (status=%i)\n", ret);
+ return -ETIMEDOUT;
}
/*
@@ -316,8 +335,12 @@ static int em25xx_bus_B_send_bytes(struct em28xx *dev, u16 addr, u8 *buf,
*/
if (!ret)
return len;
- else if (ret > 0)
- return -ENODEV;
+ else if (ret > 0) {
+ if (i2c_debug == 1)
+ em28xx_warn("Bus B R08 returned 0x%02x: I2C timeout",
+ ret);
+ return -ENXIO;
+ }
return ret;
/*
@@ -355,7 +378,7 @@ static int em25xx_bus_B_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf,
* bytes if we are on bus B AND there was no write attempt to the
* specified slave address before AND no device is present at the
* requested slave address.
- * Anyway, the next check will fail with -ENODEV in this case, so avoid
+ * Anyway, the next check will fail with -ENXIO in this case, so avoid
* spamming the system log on device probing and do nothing here.
*/
@@ -367,8 +390,12 @@ static int em25xx_bus_B_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf,
*/
if (!ret)
return len;
- else if (ret > 0)
- return -ENODEV;
+ else if (ret > 0) {
+ if (i2c_debug == 1)
+ em28xx_warn("Bus B R08 returned 0x%02x: I2C timeout",
+ ret);
+ return -ENXIO;
+ }
return ret;
/*
@@ -409,10 +436,6 @@ static inline int i2c_check_for_device(struct em28xx_i2c_bus *i2c_bus, u16 addr)
rc = em2800_i2c_check_for_device(dev, addr);
else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM25XX_BUS_B)
rc = em25xx_bus_B_check_for_device(dev, addr);
- if (rc == -ENODEV) {
- if (i2c_debug)
- printk(" no device\n");
- }
return rc;
}
@@ -421,7 +444,7 @@ static inline int i2c_recv_bytes(struct em28xx_i2c_bus *i2c_bus,
{
struct em28xx *dev = i2c_bus->dev;
u16 addr = msg.addr << 1;
- int byte, rc = -EOPNOTSUPP;
+ int rc = -EOPNOTSUPP;
if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX)
rc = em28xx_i2c_recv_bytes(dev, addr, msg.buf, msg.len);
@@ -429,10 +452,6 @@ static inline int i2c_recv_bytes(struct em28xx_i2c_bus *i2c_bus,
rc = em2800_i2c_recv_bytes(dev, addr, msg.buf, msg.len);
else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM25XX_BUS_B)
rc = em25xx_bus_B_recv_bytes(dev, addr, msg.buf, msg.len);
- if (i2c_debug) {
- for (byte = 0; byte < msg.len; byte++)
- printk(" %02x", msg.buf[byte]);
- }
return rc;
}
@@ -441,12 +460,8 @@ static inline int i2c_send_bytes(struct em28xx_i2c_bus *i2c_bus,
{
struct em28xx *dev = i2c_bus->dev;
u16 addr = msg.addr << 1;
- int byte, rc = -EOPNOTSUPP;
+ int rc = -EOPNOTSUPP;
- if (i2c_debug) {
- for (byte = 0; byte < msg.len; byte++)
- printk(" %02x", msg.buf[byte]);
- }
if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX)
rc = em28xx_i2c_send_bytes(dev, addr, msg.buf, msg.len, stop);
else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM2800)
@@ -491,33 +506,53 @@ static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap,
}
for (i = 0; i < num; i++) {
addr = msgs[i].addr << 1;
- if (i2c_debug)
+ if (i2c_debug > 1)
printk(KERN_DEBUG "%s at %s: %s %s addr=%02x len=%d:",
dev->name, __func__ ,
(msgs[i].flags & I2C_M_RD) ? "read" : "write",
i == num - 1 ? "stop" : "nonstop",
addr, msgs[i].len);
- if (!msgs[i].len) { /* no len: check only for device presence */
+ if (!msgs[i].len) {
+ /*
+ * no len: check only for device presence
+ * This code is only called during device probe.
+ */
rc = i2c_check_for_device(i2c_bus, addr);
- if (rc == -ENODEV) {
+ if (rc < 0) {
+ if (rc == -ENXIO) {
+ if (i2c_debug > 1)
+ printk(KERN_CONT " no device\n");
+ rc = -ENODEV;
+ } else {
+ if (i2c_debug > 1)
+ printk(KERN_CONT " ERROR: %i\n", rc);
+ }
rt_mutex_unlock(&dev->i2c_bus_lock);
return rc;
}
} else if (msgs[i].flags & I2C_M_RD) {
/* read bytes */
rc = i2c_recv_bytes(i2c_bus, msgs[i]);
+
+ if (i2c_debug > 1 && rc >= 0)
+ printk(KERN_CONT " %*ph",
+ msgs[i].len, msgs[i].buf);
} else {
+ if (i2c_debug > 1)
+ printk(KERN_CONT " %*ph",
+ msgs[i].len, msgs[i].buf);
+
/* write bytes */
rc = i2c_send_bytes(i2c_bus, msgs[i], i == num - 1);
}
if (rc < 0) {
- if (i2c_debug)
- printk(" ERROR: %i\n", rc);
+ if (i2c_debug > 1)
+ printk(KERN_CONT " ERROR: %i\n", rc);
rt_mutex_unlock(&dev->i2c_bus_lock);
return rc;
}
- if (i2c_debug)
- printk("\n");
+ if (i2c_debug > 1)
+ printk(KERN_CONT "\n");
}
rt_mutex_unlock(&dev->i2c_bus_lock);
@@ -600,7 +635,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus,
* calculation and returned device dataset. Simplifies the code a lot,
* but we might have to deal with multiple sizes in the future !
*/
- int i, err;
+ int err;
struct em28xx_eeprom *dev_config;
u8 buf, *data;
@@ -631,20 +666,14 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus,
goto error;
}
- /* Display eeprom content */
- for (i = 0; i < len; i++) {
- if (0 == (i % 16)) {
- if (dev->eeprom_addrwidth_16bit)
- em28xx_info("i2c eeprom %04x:", i);
- else
- em28xx_info("i2c eeprom %02x:", i);
- }
- printk(" %02x", data[i]);
- if (15 == (i % 16))
- printk("\n");
+ if (i2c_debug) {
+ /* Display eeprom content */
+ print_hex_dump(KERN_INFO, "eeprom ", DUMP_PREFIX_OFFSET,
+ 16, 1, data, len, true);
+
+ if (dev->eeprom_addrwidth_16bit)
+ em28xx_info("eeprom %06x: ... (skipped)\n", 256);
}
- if (dev->eeprom_addrwidth_16bit)
- em28xx_info("i2c eeprom %04x: ... (skipped)\n", i);
if (dev->eeprom_addrwidth_16bit &&
data[0] == 0x26 && data[3] == 0x00) {
@@ -736,10 +765,16 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus,
em28xx_info("\tAC97 audio (5 sample rates)\n");
break;
case 2:
- em28xx_info("\tI2S audio, sample rate=32k\n");
+ if (dev->chip_id < CHIP_ID_EM2860)
+ em28xx_info("\tI2S audio, sample rate=32k\n");
+ else
+ em28xx_info("\tI2S audio, 3 sample rates\n");
break;
case 3:
- em28xx_info("\tI2S audio, 3 sample rates\n");
+ if (dev->chip_id < CHIP_ID_EM2860)
+ em28xx_info("\tI2S audio, 3 sample rates\n");
+ else
+ em28xx_info("\tI2S audio, 5 sample rates\n");
break;
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 15:07:12 +0000