diff options
Diffstat (limited to 'drivers/media/usb/b2c2/flexcop-usb.c')
-rw-r--r-- | drivers/media/usb/b2c2/flexcop-usb.c | 105 |
1 files changed, 68 insertions, 37 deletions
diff --git a/drivers/media/usb/b2c2/flexcop-usb.c b/drivers/media/usb/b2c2/flexcop-usb.c index d4bdba60b0f7..52bc42da8a4c 100644 --- a/drivers/media/usb/b2c2/flexcop-usb.c +++ b/drivers/media/usb/b2c2/flexcop-usb.c @@ -73,23 +73,34 @@ static int flexcop_usb_readwrite_dw(struct flexcop_device *fc, u16 wRegOffsPCI, u8 request_type = (read ? USB_DIR_IN : USB_DIR_OUT) | USB_TYPE_VENDOR; u8 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI) | (read ? 0x80 : 0); + int ret; + + mutex_lock(&fc_usb->data_mutex); + if (!read) + memcpy(fc_usb->data, val, sizeof(*val)); - int len = usb_control_msg(fc_usb->udev, + ret = usb_control_msg(fc_usb->udev, read ? B2C2_USB_CTRL_PIPE_IN : B2C2_USB_CTRL_PIPE_OUT, request, request_type, /* 0xc0 read or 0x40 write */ wAddress, 0, - val, + fc_usb->data, sizeof(u32), B2C2_WAIT_FOR_OPERATION_RDW * HZ); - if (len != sizeof(u32)) { + if (ret != sizeof(u32)) { err("error while %s dword from %d (%d).", read ? "reading" : "writing", wAddress, wRegOffsPCI); - return -EIO; + if (ret >= 0) + ret = -EIO; } - return 0; + + if (read && ret >= 0) + memcpy(val, fc_usb->data, sizeof(*val)); + mutex_unlock(&fc_usb->data_mutex); + + return ret; } /* * DKT 010817 - add support for V8 memory read/write and flash update @@ -100,9 +111,14 @@ static int flexcop_usb_v8_memory_req(struct flexcop_usb *fc_usb, { u8 request_type = USB_TYPE_VENDOR; u16 wIndex; - int nWaitTime, pipe, len; + int nWaitTime, pipe, ret; wIndex = page << 8; + if (buflen > sizeof(fc_usb->data)) { + err("Buffer size bigger than max URB control message\n"); + return -EIO; + } + switch (req) { case B2C2_USB_READ_V8_MEM: nWaitTime = B2C2_WAIT_FOR_OPERATION_V8READ; @@ -127,17 +143,32 @@ static int flexcop_usb_v8_memory_req(struct flexcop_usb *fc_usb, deb_v8("v8mem: %02x %02x %04x %04x, len: %d\n", request_type, req, wAddress, wIndex, buflen); - len = usb_control_msg(fc_usb->udev, pipe, + mutex_lock(&fc_usb->data_mutex); + + if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) + memcpy(fc_usb->data, pbBuffer, buflen); + + ret = usb_control_msg(fc_usb->udev, pipe, req, request_type, wAddress, wIndex, - pbBuffer, + fc_usb->data, buflen, nWaitTime * HZ); + if (ret != buflen) + ret = -EIO; + + if (ret >= 0) { + ret = 0; + if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) + memcpy(pbBuffer, fc_usb->data, buflen); + } - debug_dump(pbBuffer, len, deb_v8); - return len == buflen ? 0 : -EIO; + mutex_unlock(&fc_usb->data_mutex); + + debug_dump(pbBuffer, ret, deb_v8); + return ret; } #define bytes_left_to_read_on_page(paddr,buflen) \ @@ -196,29 +227,6 @@ static int flexcop_usb_get_mac_addr(struct flexcop_device *fc, int extended) fc->dvb_adapter.proposed_mac, 6); } -#if 0 -static int flexcop_usb_utility_req(struct flexcop_usb *fc_usb, int set, - flexcop_usb_utility_function_t func, u8 extra, u16 wIndex, - u16 buflen, u8 *pvBuffer) -{ - u16 wValue; - u8 request_type = (set ? USB_DIR_OUT : USB_DIR_IN) | USB_TYPE_VENDOR; - int nWaitTime = 2, - pipe = set ? B2C2_USB_CTRL_PIPE_OUT : B2C2_USB_CTRL_PIPE_IN, len; - wValue = (func << 8) | extra; - - len = usb_control_msg(fc_usb->udev,pipe, - B2C2_USB_UTILITY, - request_type, - wValue, - wIndex, - pvBuffer, - buflen, - nWaitTime * HZ); - return len == buflen ? 0 : -EIO; -} -#endif - /* usb i2c stuff */ static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c, flexcop_usb_request_t req, flexcop_usb_i2c_function_t func, @@ -226,9 +234,14 @@ static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c, { struct flexcop_usb *fc_usb = i2c->fc->bus_specific; u16 wValue, wIndex; - int nWaitTime,pipe,len; + int nWaitTime, pipe, ret; u8 request_type = USB_TYPE_VENDOR; + if (buflen > sizeof(fc_usb->data)) { + err("Buffer size bigger than max URB control message\n"); + return -EIO; + } + switch (func) { case USB_FUNC_I2C_WRITE: case USB_FUNC_I2C_MULTIWRITE: @@ -257,15 +270,32 @@ static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c, wValue & 0xff, wValue >> 8, wIndex & 0xff, wIndex >> 8); - len = usb_control_msg(fc_usb->udev,pipe, + mutex_lock(&fc_usb->data_mutex); + + if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) + memcpy(fc_usb->data, buf, buflen); + + ret = usb_control_msg(fc_usb->udev, pipe, req, request_type, wValue, wIndex, - buf, + fc_usb->data, buflen, nWaitTime * HZ); - return len == buflen ? 0 : -EREMOTEIO; + + if (ret != buflen) + ret = -EIO; + + if (ret >= 0) { + ret = 0; + if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) + memcpy(buf, fc_usb->data, buflen); + } + + mutex_unlock(&fc_usb->data_mutex); + + return 0; } /* actual bus specific access functions, @@ -516,6 +546,7 @@ static int flexcop_usb_probe(struct usb_interface *intf, /* general flexcop init */ fc_usb = fc->bus_specific; fc_usb->fc_dev = fc; + mutex_init(&fc_usb->data_mutex); fc->read_ibi_reg = flexcop_usb_read_ibi_reg; fc->write_ibi_reg = flexcop_usb_write_ibi_reg; |