diff options
Diffstat (limited to 'drivers/media/platform')
-rw-r--r-- | drivers/media/platform/Kconfig | 22 | ||||
-rw-r--r-- | drivers/media/platform/Makefile | 4 | ||||
-rw-r--r-- | drivers/media/platform/arv.c | 884 | ||||
-rw-r--r-- | drivers/media/platform/blackfin/Kconfig | 16 | ||||
-rw-r--r-- | drivers/media/platform/blackfin/Makefile | 2 | ||||
-rw-r--r-- | drivers/media/platform/blackfin/bfin_capture.c | 983 | ||||
-rw-r--r-- | drivers/media/platform/blackfin/ppi.c | 361 | ||||
-rw-r--r-- | drivers/media/platform/qcom/venus/hfi.c | 8 | ||||
-rw-r--r-- | drivers/media/platform/tegra-cec/tegra_cec.c | 17 |
9 files changed, 11 insertions, 2286 deletions
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index 5d8fd71fc454..c7a1cf8a1b01 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -31,8 +31,6 @@ source "drivers/media/platform/davinci/Kconfig" source "drivers/media/platform/omap/Kconfig" -source "drivers/media/platform/blackfin/Kconfig" - config VIDEO_SH_VOU tristate "SuperH VOU video output driver" depends on MEDIA_CAMERA_SUPPORT @@ -54,26 +52,6 @@ config VIDEO_VIU Say Y here if you want to enable VIU device on MPC5121e Rev2+. In doubt, say N. -config VIDEO_M32R_AR - tristate "AR devices" - depends on VIDEO_V4L2 - depends on M32R || COMPILE_TEST - ---help--- - This is a video4linux driver for the Renesas AR (Artificial Retina) - camera module. - -config VIDEO_M32R_AR_M64278 - tristate "AR device with color module M64278(VGA)" - depends on PLAT_M32700UT - select VIDEO_M32R_AR - ---help--- - This is a video4linux driver for the Renesas AR (Artificial - Retina) with M64278E-800 camera module. - This module supports VGA(640x480 pixels) resolutions. - - To compile this driver as a module, choose M here: the - module will be called arv. - config VIDEO_MUX tristate "Video Multiplexer" select MULTIPLEXER diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile index 85e112122f32..932515df4477 100644 --- a/drivers/media/platform/Makefile +++ b/drivers/media/platform/Makefile @@ -3,8 +3,6 @@ # Makefile for the video capture/playback device drivers. # -obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o - obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o obj-$(CONFIG_VIDEO_CAFE_CCIC) += marvell-ccic/ obj-$(CONFIG_VIDEO_MMP_CAMERA) += marvell-ccic/ @@ -53,8 +51,6 @@ obj-$(CONFIG_VIDEO_TEGRA_HDMI_CEC) += tegra-cec/ obj-y += stm32/ -obj-y += blackfin/ - obj-y += davinci/ obj-$(CONFIG_VIDEO_SH_VOU) += sh_vou.o diff --git a/drivers/media/platform/arv.c b/drivers/media/platform/arv.c deleted file mode 100644 index 1e865fea803c..000000000000 --- a/drivers/media/platform/arv.c +++ /dev/null @@ -1,884 +0,0 @@ -/* - * Colour AR M64278(VGA) driver for Video4Linux - * - * Copyright (C) 2003 Takeo Takahashi <takahashi.takeo@renesas.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Some code is taken from AR driver sample program for M3T-M32700UT. - * - * AR driver sample (M32R SDK): - * Copyright (c) 2003 RENESAS TECHNOROGY CORPORATION - * AND RENESAS SOLUTIONS CORPORATION - * All Rights Reserved. - * - * 2003-09-01: Support w3cam by Takeo Takahashi - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/videodev2.h> -#include <media/v4l2-common.h> -#include <media/v4l2-device.h> -#include <media/v4l2-ioctl.h> -#include <media/v4l2-fh.h> -#include <linux/mutex.h> - -#include <linux/uaccess.h> -#include <asm/m32r.h> -#include <asm/io.h> -#include <asm/dma.h> -#include <asm/byteorder.h> - -#if 0 -#define DEBUG(n, args...) printk(KERN_INFO args) -#define CHECK_LOST 1 -#else -#define DEBUG(n, args...) -#define CHECK_LOST 0 -#endif - -/* - * USE_INT is always 0, interrupt mode is not available - * on linux due to lack of speed - */ -#define USE_INT 0 /* Don't modify */ - -#define VERSION "0.0.5" - -#define ar_inl(addr) inl((unsigned long)(addr)) -#define ar_outl(val, addr) outl((unsigned long)(val), (unsigned long)(addr)) - -extern struct cpuinfo_m32r boot_cpu_data; - -/* - * CCD pixel size - * Note that M32700UT does not support CIF mode, but QVGA is - * supported by M32700UT hardware using VGA mode of AR LSI. - * - * Supported: VGA (Normal mode, Interlace mode) - * QVGA (Always Interlace mode of VGA) - * - */ -#define AR_WIDTH_VGA 640 -#define AR_HEIGHT_VGA 480 -#define AR_WIDTH_QVGA 320 -#define AR_HEIGHT_QVGA 240 -#define MIN_AR_WIDTH AR_WIDTH_QVGA -#define MIN_AR_HEIGHT AR_HEIGHT_QVGA -#define MAX_AR_WIDTH AR_WIDTH_VGA -#define MAX_AR_HEIGHT AR_HEIGHT_VGA - -/* bits & bytes per pixel */ -#define AR_BITS_PER_PIXEL 16 -#define AR_BYTES_PER_PIXEL (AR_BITS_PER_PIXEL / 8) - -/* line buffer size */ -#define AR_LINE_BYTES_VGA (AR_WIDTH_VGA * AR_BYTES_PER_PIXEL) -#define AR_LINE_BYTES_QVGA (AR_WIDTH_QVGA * AR_BYTES_PER_PIXEL) -#define MAX_AR_LINE_BYTES AR_LINE_BYTES_VGA - -/* frame size & type */ -#define AR_FRAME_BYTES_VGA \ - (AR_WIDTH_VGA * AR_HEIGHT_VGA * AR_BYTES_PER_PIXEL) -#define AR_FRAME_BYTES_QVGA \ - (AR_WIDTH_QVGA * AR_HEIGHT_QVGA * AR_BYTES_PER_PIXEL) -#define MAX_AR_FRAME_BYTES \ - (MAX_AR_WIDTH * MAX_AR_HEIGHT * AR_BYTES_PER_PIXEL) - -#define AR_MAX_FRAME 15 - -/* capture size */ -#define AR_SIZE_VGA 0 -#define AR_SIZE_QVGA 1 - -/* capture mode */ -#define AR_MODE_INTERLACE 0 -#define AR_MODE_NORMAL 1 - -struct ar { - struct v4l2_device v4l2_dev; - struct video_device vdev; - int start_capture; /* duaring capture in INT. mode. */ -#if USE_INT - unsigned char *line_buff; /* DMA line buffer */ -#endif - unsigned char *frame[MAX_AR_HEIGHT]; /* frame data */ - short size; /* capture size */ - short mode; /* capture mode */ - int width, height; - int frame_bytes, line_bytes; - wait_queue_head_t wait; - struct mutex lock; -}; - -static struct ar ardev; - -static int video_nr = -1; /* video device number (first free) */ -static unsigned char yuv[MAX_AR_FRAME_BYTES]; - -/* module parameters */ -/* default frequency */ -#define DEFAULT_FREQ 50 /* 50 or 75 (MHz) is available as BCLK */ -static int freq = DEFAULT_FREQ; /* BCLK: available 50 or 70 (MHz) */ -static int vga; /* default mode(0:QVGA mode, other:VGA mode) */ -static int vga_interlace; /* 0 is normal mode for, else interlace mode */ -module_param(freq, int, 0); -module_param(vga, int, 0); -module_param(vga_interlace, int, 0); - -static void wait_for_vsync(void) -{ - while (ar_inl(ARVCR0) & ARVCR0_VDS) /* wait for VSYNC */ - cpu_relax(); - while (!(ar_inl(ARVCR0) & ARVCR0_VDS)) /* wait for VSYNC */ - cpu_relax(); -} - -static void wait_acknowledge(void) -{ - int i; - - for (i = 0; i < 1000; i++) - cpu_relax(); - while (ar_inl(PLDI2CSTS) & PLDI2CSTS_NOACK) - cpu_relax(); -} - -/******************************************************************* - * I2C functions - *******************************************************************/ -static void iic(int n, unsigned long addr, unsigned long data1, unsigned long data2, - unsigned long data3) -{ - int i; - - /* Slave Address */ - ar_outl(addr, PLDI2CDATA); - wait_for_vsync(); - - /* Start */ - ar_outl(1, PLDI2CCND); - wait_acknowledge(); - - /* Transfer data 1 */ - ar_outl(data1, PLDI2CDATA); - wait_for_vsync(); - ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN); - wait_acknowledge(); - - /* Transfer data 2 */ - ar_outl(data2, PLDI2CDATA); - wait_for_vsync(); - ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN); - wait_acknowledge(); - - if (n == 3) { - /* Transfer data 3 */ - ar_outl(data3, PLDI2CDATA); - wait_for_vsync(); - ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN); - wait_acknowledge(); - } - - /* Stop */ - for (i = 0; i < 100; i++) - cpu_relax(); - ar_outl(2, PLDI2CCND); - ar_outl(2, PLDI2CCND); - - while (ar_inl(PLDI2CSTS) & PLDI2CSTS_BB) - cpu_relax(); -} - - -static void init_iic(void) -{ - DEBUG(1, "init_iic:\n"); - - /* - * ICU Setting (iic) - */ - /* I2C Setting */ - ar_outl(0x0, PLDI2CCR); /* I2CCR Disable */ - ar_outl(0x0300, PLDI2CMOD); /* I2CMOD ACK/8b-data/7b-addr/auto */ - ar_outl(0x1, PLDI2CACK); /* I2CACK ACK */ - - /* I2C CLK */ - /* 50MH-100k */ - if (freq == 75) - ar_outl(369, PLDI2CFREQ); /* BCLK = 75MHz */ - else if (freq == 50) - ar_outl(244, PLDI2CFREQ); /* BCLK = 50MHz */ - else - ar_outl(244, PLDI2CFREQ); /* default: BCLK = 50MHz */ - ar_outl(0x1, PLDI2CCR); /* I2CCR Enable */ -} - -/************************************************************************** - * - * Video4Linux Interface functions - * - **************************************************************************/ - -static inline void disable_dma(void) -{ - ar_outl(0x8000, M32R_DMAEN_PORTL); /* disable DMA0 */ -} - -static inline void enable_dma(void) -{ - ar_outl(0x8080, M32R_DMAEN_PORTL); /* enable DMA0 */ -} - -static inline void clear_dma_status(void) -{ - ar_outl(0x8000, M32R_DMAEDET_PORTL); /* clear status */ -} - -static void wait_for_vertical_sync(struct ar *ar, int exp_line) -{ -#if CHECK_LOST - int tmout = 10000; /* FIXME */ - int l; - - /* - * check HCOUNT because we cannot check vertical sync. - */ - for (; tmout >= 0; tmout--) { - l = ar_inl(ARVHCOUNT); - if (l == exp_line) - break; - } - if (tmout < 0) - v4l2_err(&ar->v4l2_dev, "lost %d -> %d\n", exp_line, l); -#else - while (ar_inl(ARVHCOUNT) != exp_line) - cpu_relax(); -#endif -} - -static ssize_t ar_read(struct file *file, char *buf, size_t count, loff_t *ppos) -{ - struct ar *ar = video_drvdata(file); - long ret = ar->frame_bytes; /* return read bytes */ - unsigned long arvcr1 = 0; - unsigned long flags; - unsigned char *p; - int h, w; - unsigned char *py, *pu, *pv; -#if !USE_INT - int l; -#endif - - DEBUG(1, "ar_read()\n"); - - if (ar->size == AR_SIZE_QVGA) - arvcr1 |= ARVCR1_QVGA; - if (ar->mode == AR_MODE_NORMAL) - arvcr1 |= ARVCR1_NORMAL; - - mutex_lock(&ar->lock); - -#if USE_INT - local_irq_save(flags); - disable_dma(); - ar_outl(0xa1871300, M32R_DMA0CR0_PORTL); - ar_outl(0x01000000, M32R_DMA0CR1_PORTL); - - /* set AR FIFO address as source(BSEL5) */ - ar_outl(ARDATA32, M32R_DMA0CSA_PORTL); - ar_outl(ARDATA32, M32R_DMA0RSA_PORTL); - ar_outl(ar->line_buff, M32R_DMA0CDA_PORTL); /* destination addr. */ - ar_outl(ar->line_buff, M32R_DMA0RDA_PORTL); /* reload address */ - ar_outl(ar->line_bytes, M32R_DMA0CBCUT_PORTL); /* byte count (bytes) */ - ar_outl(ar->line_bytes, M32R_DMA0RBCUT_PORTL); /* reload count (bytes) */ - - /* - * Okay, kick AR LSI to invoke an interrupt - */ - ar->start_capture = -1; - ar_outl(arvcr1 | ARVCR1_HIEN, ARVCR1); - local_irq_restore(flags); - /* .... AR interrupts .... */ - wait_event_interruptible(ar->wait, ar->start_capture == 0); - if (signal_pending(current)) { - printk(KERN_ERR "arv: interrupted while get frame data.\n"); - ret = -EINTR; - goto out_up; - } -#else /* ! USE_INT */ - /* polling */ - ar_outl(arvcr1, ARVCR1); - disable_dma(); - ar_outl(0x8000, M32R_DMAEDET_PORTL); - ar_outl(0xa0861300, M32R_DMA0CR0_PORTL); - ar_outl(0x01000000, M32R_DMA0CR1_PORTL); - ar_outl(ARDATA32, M32R_DMA0CSA_PORTL); - ar_outl(ARDATA32, M32R_DMA0RSA_PORTL); - ar_outl(ar->line_bytes, M32R_DMA0CBCUT_PORTL); - ar_outl(ar->line_bytes, M32R_DMA0RBCUT_PORTL); - - local_irq_save(flags); - while (ar_inl(ARVHCOUNT) != 0) /* wait for 0 */ - cpu_relax(); - if (ar->mode == AR_MODE_INTERLACE && ar->size == AR_SIZE_VGA) { - for (h = 0; h < ar->height; h++) { - wait_for_vertical_sync(ar, h); - if (h < (AR_HEIGHT_VGA/2)) - l = h << 1; - else - l = (((h - (AR_HEIGHT_VGA/2)) << 1) + 1); - ar_outl(virt_to_phys(ar->frame[l]), M32R_DMA0CDA_PORTL); - enable_dma(); - while (!(ar_inl(M32R_DMAEDET_PORTL) & 0x8000)) - cpu_relax(); - disable_dma(); - clear_dma_status(); - ar_outl(0xa0861300, M32R_DMA0CR0_PORTL); - } - } else { - for (h = 0; h < ar->height; h++) { - wait_for_vertical_sync(ar, h); - ar_outl(virt_to_phys(ar->frame[h]), M32R_DMA0CDA_PORTL); - enable_dma(); - while (!(ar_inl(M32R_DMAEDET_PORTL) & 0x8000)) - cpu_relax(); - disable_dma(); - clear_dma_status(); - ar_outl(0xa0861300, M32R_DMA0CR0_PORTL); - } - } - local_irq_restore(flags); -#endif /* ! USE_INT */ - - /* - * convert YUV422 to YUV422P - * +--------------------+ - * | Y0,Y1,... | - * | ..............Yn | - * +--------------------+ - * | U0,U1,........Un | - * +--------------------+ - * | V0,V1,........Vn | - * +--------------------+ - */ - py = yuv; - pu = py + (ar->frame_bytes / 2); - pv = pu + (ar->frame_bytes / 4); - for (h = 0; h < ar->height; h++) { - p = ar->frame[h]; - for (w = 0; w < ar->line_bytes; w += 4) { - *py++ = *p++; - *pu++ = *p++; - *py++ = *p++; - *pv++ = *p++; - } - } - if (copy_to_user(buf, yuv, ar->frame_bytes)) { - v4l2_err(&ar->v4l2_dev, "failed while copy_to_user yuv.\n"); - ret = -EFAULT; - goto out_up; - } - DEBUG(1, "ret = %d\n", ret); -out_up: - mutex_unlock(&ar->lock); - return ret; -} - -static int ar_querycap(struct file *file, void *priv, - struct v4l2_capability *vcap) -{ - struct ar *ar = video_drvdata(file); - - strlcpy(vcap->driver, ar->vdev.name, sizeof(vcap->driver)); - strlcpy(vcap->card, "Colour AR VGA", sizeof(vcap->card)); - strlcpy(vcap->bus_info, "Platform", sizeof(vcap->bus_info)); - vcap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; - vcap->capabilities = vcap->device_caps | V4L2_CAP_DEVICE_CAPS; - return 0; -} - -static int ar_enum_input(struct file *file, void *fh, struct v4l2_input *vin) -{ - if (vin->index > 0) - return -EINVAL; - strlcpy(vin->name, "Camera", sizeof(vin->name)); - vin->type = V4L2_INPUT_TYPE_CAMERA; - vin->audioset = 0; - vin->tuner = 0; - vin->std = V4L2_STD_ALL; - vin->status = 0; - return 0; -} - -static int ar_g_input(struct file *file, void *fh, unsigned int *inp) -{ - *inp = 0; - return 0; -} - -static int ar_s_input(struct file *file, void *fh, unsigned int inp) -{ - return inp ? -EINVAL : 0; -} - -static int ar_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) -{ - struct ar *ar = video_drvdata(file); - struct v4l2_pix_format *pix = &fmt->fmt.pix; - - pix->width = ar->width; - pix->height = ar->height; - pix->pixelformat = V4L2_PIX_FMT_YUV422P; - pix->field = (ar->mode == AR_MODE_NORMAL) ? V4L2_FIELD_NONE : V4L2_FIELD_INTERLACED; - pix->bytesperline = ar->width; - pix->sizeimage = 2 * ar->width * ar->height; - /* Just a guess */ - pix->colorspace = V4L2_COLORSPACE_SMPTE170M; - return 0; -} - -static int ar_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) -{ - struct ar *ar = video_drvdata(file); - struct v4l2_pix_format *pix = &fmt->fmt.pix; - - if (pix->height <= AR_HEIGHT_QVGA || pix->width <= AR_WIDTH_QVGA) { - pix->height = AR_HEIGHT_QVGA; - pix->width = AR_WIDTH_QVGA; - pix->field = V4L2_FIELD_INTERLACED; - } else { - pix->height = AR_HEIGHT_VGA; - pix->width = AR_WIDTH_VGA; - pix->field = vga_interlace ? V4L2_FIELD_INTERLACED : V4L2_FIELD_NONE; - } - pix->pixelformat = V4L2_PIX_FMT_YUV422P; - pix->bytesperline = ar->width; - pix->sizeimage = 2 * ar->width * ar->height; - /* Just a guess */ - pix->colorspace = V4L2_COLORSPACE_SMPTE170M; - return 0; -} - -static int ar_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) -{ - struct ar *ar = video_drvdata(file); - struct v4l2_pix_format *pix = &fmt->fmt.pix; - int ret = ar_try_fmt_vid_cap(file, fh, fmt); - - if (ret) - return ret; - mutex_lock(&ar->lock); - ar->width = pix->width; - ar->height = pix->height; - if (ar->width == AR_WIDTH_VGA) { - ar->size = AR_SIZE_VGA; - ar->frame_bytes = AR_FRAME_BYTES_VGA; - ar->line_bytes = AR_LINE_BYTES_VGA; - if (vga_interlace) - ar->mode = AR_MODE_INTERLACE; - else - ar->mode = AR_MODE_NORMAL; - } else { - ar->size = AR_SIZE_QVGA; - ar->frame_bytes = AR_FRAME_BYTES_QVGA; - ar->line_bytes = AR_LINE_BYTES_QVGA; - ar->mode = AR_MODE_INTERLACE; - } - /* Ok we figured out what to use from our wide choice */ - mutex_unlock(&ar->lock); - return 0; -} - -static int ar_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt) -{ - static struct v4l2_fmtdesc formats[] = { - { 0, 0, 0, - "YUV 4:2:2 Planar", V4L2_PIX_FMT_YUV422P, - { 0, 0, 0, 0 } - }, - }; - enum v4l2_buf_type type = fmt->type; - - if (fmt->index > 0) - return -EINVAL; - - *fmt = formats[fmt->index]; - fmt->type = type; - return 0; -} - -#if USE_INT -/* - * Interrupt handler - */ -static void ar_interrupt(int irq, void *dev) -{ - struct ar *ar = dev; - unsigned int line_count; - unsigned int line_number; - unsigned int arvcr1; - - line_count = ar_inl(ARVHCOUNT); /* line number */ - if (ar->mode == AR_MODE_INTERLACE && ar->size == AR_SIZE_VGA) { - /* operations for interlace mode */ - if (line_count < (AR_HEIGHT_VGA / 2)) /* even line */ - line_number = (line_count << 1); - else /* odd line */ - line_number = - (((line_count - (AR_HEIGHT_VGA / 2)) << 1) + 1); - } else { - line_number = line_count; - } - - if (line_number == 0) { - /* - * It is an interrupt for line 0. - * we have to start capture. - */ - disable_dma(); -#if 0 - ar_outl(ar->line_buff, M32R_DMA0CDA_PORTL); /* needless? */ -#endif - memcpy(ar->frame[0], ar->line_buff, ar->line_bytes); -#if 0 - ar_outl(0xa1861300, M32R_DMA0CR0_PORTL); -#endif - enable_dma(); - ar->start_capture = 1; /* during capture */ - return; - } - - if (ar->start_capture == 1 && line_number <= (ar->height - 1)) { - disable_dma(); - memcpy(ar->frame[line_number], ar->line_buff, ar->line_bytes); - - /* - * if captured all line of a frame, disable AR interrupt - * and wake a process up. - */ - if (line_number == (ar->height - 1)) { /* end of line */ - - ar->start_capture = 0; - - /* disable AR interrupt request */ - arvcr1 = ar_inl(ARVCR1); - arvcr1 &= ~ARVCR1_HIEN; /* clear int. flag */ - ar_outl(arvcr1, ARVCR1); /* disable */ - wake_up_interruptible(&ar->wait); - } else { -#if 0 - ar_outl(ar->line_buff, M32R_DMA0CDA_PORTL); - ar_outl(0xa1861300, M32R_DMA0CR0_PORTL); -#endif - enable_dma(); - } - } -} -#endif - -/* - * ar_initialize() - * ar_initialize() is called by video_register_device() and - * initializes AR LSI and peripherals. - * - * -1 is returned in all failures. - * 0 is returned in success. - * - */ -static int ar_initialize(struct ar *ar) -{ - unsigned long cr = 0; - int i, found = 0; - - DEBUG(1, "ar_initialize:\n"); - - /* - * initialize AR LSI - */ - ar_outl(0, ARVCR0); /* assert reset of AR LSI */ - for (i = 0; i < 0x18; i++) /* wait for over 10 cycles @ 27MHz */ - cpu_relax(); - ar_outl(ARVCR0_RST, ARVCR0); /* negate reset of AR LSI (enable) */ - for (i = 0; i < 0x40d; i++) /* wait for over 420 cycles @ 27MHz */ - cpu_relax(); - - /* AR uses INT3 of CPU as interrupt pin. */ - ar_outl(ARINTSEL_INT3, ARINTSEL); - - if (ar->size == AR_SIZE_QVGA) - cr |= ARVCR1_QVGA; - if (ar->mode == AR_MODE_NORMAL) - cr |= ARVCR1_NORMAL; - ar_outl(cr, ARVCR1); - - /* - * Initialize IIC so that CPU can communicate with AR LSI, - * and send boot commands to AR LSI. - */ - init_iic(); - - for (i = 0; i < 0x100000; i++) { /* > 0xa1d10, 56ms */ - if ((ar_inl(ARVCR0) & ARVCR0_VDS)) { /* VSYNC */ - found = 1; - break; - } - } - - if (found == 0) - return -ENODEV; - - v4l2_info(&ar->v4l2_dev, "Initializing "); - - iic(2, 0x78, 0x11, 0x01, 0x00); /* start */ - iic(3, 0x78, 0x12, 0x00, 0x06); - iic(3, 0x78, 0x12, 0x12, 0x30); - iic(3, 0x78, 0x12, 0x15, 0x58); - iic(3, 0x78, 0x12, 0x17, 0x30); - printk(KERN_CONT "."); - iic(3, 0x78, 0x12, 0x1a, 0x97); - iic(3, 0x78, 0x12, 0x1b, 0xff); - iic(3, 0x78, 0x12, 0x1c, 0xff); - iic(3, 0x78, 0x12, 0x26, 0x10); - iic(3, 0x78, 0x12, 0x27, 0x00); - printk(KERN_CONT "."); - iic(2, 0x78, 0x34, 0x02, 0x00); - iic(2, 0x78, 0x7a, 0x10, 0x00); - iic(2, 0x78, 0x80, 0x39, 0x00); - iic(2, 0x78, 0x81, 0xe6, 0x00); - iic(2, 0x78, 0x8d, 0x00, 0x00); - printk(KERN_CONT "."); - iic(2, 0x78, 0x8e, 0x0c, 0x00); - iic(2, 0x78, 0x8f, 0x00, 0x00); -#if 0 - iic(2, 0x78, 0x90, 0x00, 0x00); /* AWB on=1 off=0 */ -#endif - iic(2, 0x78, 0x93, 0x01, 0x00); - iic(2, 0x78, 0x94, 0xcd, 0x00); - iic(2, 0x78, 0x95, 0x00, 0x00); - printk(KERN_CONT "."); - iic(2, 0x78, 0x96, 0xa0, 0x00); - iic(2, 0x78, 0x97, 0x00, 0x00); - iic(2, 0x78, 0x98, 0x60, 0x00); - iic(2, 0x78, 0x99, 0x01, 0x00); - iic(2, 0x78, 0x9a, 0x19, 0x00); - printk(KERN_CONT "."); - iic(2, 0x78, 0x9b, 0x02, 0x00); - iic(2, 0x78, 0x9c, 0xe8, 0x00); - iic(2, 0x78, 0x9d, 0x02, 0x00); - iic(2, 0x78, 0x9e, 0x2e, 0x00); - iic(2, 0x78, 0xb8, 0x78, 0x00); - iic(2, 0x78, 0xba, 0x05, 0x00); -#if 0 - iic(2, 0x78, 0x83, 0x8c, 0x00); /* brightness */ -#endif - printk(KERN_CONT "."); - - /* color correction */ - iic(3, 0x78, 0x49, 0x00, 0x95); /* a */ - iic(3, 0x78, 0x49, 0x01, 0x96); /* b */ - iic(3, 0x78, 0x49, 0x03, 0x85); /* c */ - iic(3, 0x78, 0x49, 0x04, 0x97); /* d */ - iic(3, 0x78, 0x49, 0x02, 0x7e); /* e(Lo) */ - iic(3, 0x78, 0x49, 0x05, 0xa4); /* f(Lo) */ - iic(3, 0x78, 0x49, 0x06, 0x04); /* e(Hi) */ - iic(3, 0x78, 0x49, 0x07, 0x04); /* e(Hi) */ - iic(2, 0x78, 0x48, 0x01, 0x00); /* on=1 off=0 */ - - printk(KERN_CONT "."); - iic(2, 0x78, 0x11, 0x00, 0x00); /* end */ - printk(KERN_CONT " done\n"); - return 0; -} - - -/**************************************************************************** - * - * Video4Linux Module functions - * - ****************************************************************************/ - -static const struct v4l2_file_operations ar_fops = { - .owner = THIS_MODULE, - .open = v4l2_fh_open, - .release = v4l2_fh_release, - .read = ar_read, - .unlocked_ioctl = video_ioctl2, -}; - -static const struct v4l2_ioctl_ops ar_ioctl_ops = { - .vidioc_querycap = ar_querycap, - .vidioc_g_input = ar_g_input, - .vidioc_s_input = ar_s_input, - .vidioc_enum_input = ar_enum_input, - .vidioc_enum_fmt_vid_cap = ar_enum_fmt_vid_cap, - .vidioc_g_fmt_vid_cap = ar_g_fmt_vid_cap, - .vidioc_s_fmt_vid_cap = ar_s_fmt_vid_cap, - .vidioc_try_fmt_vid_cap = ar_try_fmt_vid_cap, -}; - -#define ALIGN4(x) ((((int)(x)) & 0x3) == 0) - -static int __init ar_init(void) -{ - struct ar *ar; - struct v4l2_device *v4l2_dev; - int ret; - int i; - - ar = &ardev; - v4l2_dev = &ar->v4l2_dev; - strlcpy(v4l2_dev->name, "arv", sizeof(v4l2_dev->name)); - v4l2_info(v4l2_dev, "Colour AR VGA driver %s\n", VERSION); - - ret = v4l2_device_register(NULL, v4l2_dev); - if (ret < 0) { - v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); - return ret; - } - ret = -EIO; - -#if USE_INT - /* allocate a DMA buffer for 1 line. */ - ar->line_buff = kmalloc(MAX_AR_LINE_BYTES, GFP_KERNEL | GFP_DMA); - if (ar->line_buff == NULL || !ALIGN4(ar->line_buff)) { - v4l2_err(v4l2_dev, "buffer allocation failed for DMA.\n"); - ret = -ENOMEM; - goto out_end; - } -#endif - /* allocate buffers for a frame */ - for (i = 0; i < MAX_AR_HEIGHT; i++) { - ar->frame[i] = kmalloc(MAX_AR_LINE_BYTES, GFP_KERNEL); - if (ar->frame[i] == NULL || !ALIGN4(ar->frame[i])) { - v4l2_err(v4l2_dev, "buffer allocation failed for frame.\n"); - ret = -ENOMEM; - goto out_line_buff; - } - } - - strlcpy(ar->vdev.name, "Colour AR VGA", sizeof(ar->vdev.name)); - ar->vdev.v4l2_dev = v4l2_dev; - ar->vdev.fops = &ar_fops; - ar->vdev.ioctl_ops = &ar_ioctl_ops; - ar->vdev.release = video_device_release_empty; - video_set_drvdata(&ar->vdev, ar); - - if (vga) { - ar->width = AR_WIDTH_VGA; - ar->height = AR_HEIGHT_VGA; - ar->size = AR_SIZE_VGA; - ar->frame_bytes = AR_FRAME_BYTES_VGA; - ar->line_bytes = AR_LINE_BYTES_VGA; - if (vga_interlace) - ar->mode = AR_MODE_INTERLACE; - else - ar->mode = AR_MODE_NORMAL; - } else { - ar->width = AR_WIDTH_QVGA; - ar->height = AR_HEIGHT_QVGA; - ar->size = AR_SIZE_QVGA; - ar->frame_bytes = AR_FRAME_BYTES_QVGA; - ar->line_bytes = AR_LINE_BYTES_QVGA; - ar->mode = AR_MODE_INTERLACE; - } - mutex_init(&ar->lock); - init_waitqueue_head(&ar->wait); - -#if USE_INT - if (request_irq(M32R_IRQ_INT3, ar_interrupt, 0, "arv", ar)) { - v4l2_err("request_irq(%d) failed.\n", M32R_IRQ_INT3); - ret = -EIO; - goto out_irq; - } -#endif - - if (ar_initialize(ar) != 0) { - v4l2_err(v4l2_dev, "M64278 not found.\n"); - ret = -ENODEV; - goto out_dev; - } - - /* - * ok, we can initialize h/w according to parameters, - * so register video device as a frame grabber type. - * device is named "video[0-64]". - * video_register_device() initializes h/w using ar_initialize(). - */ - if (video_register_device(&ar->vdev, VFL_TYPE_GRABBER, video_nr) != 0) { - /* return -1, -ENFILE(full) or others */ - v4l2_err(v4l2_dev, "register video (Colour AR) failed.\n"); - ret = -ENODEV; - goto out_dev; - } - - v4l2_info(v4l2_dev, "%s: Found M64278 VGA (IRQ %d, Freq %dMHz).\n", - video_device_node_name(&ar->vdev), M32R_IRQ_INT3, freq); - - return 0; - -out_dev: -#if USE_INT - free_irq(M32R_IRQ_INT3, ar); - -out_irq: -#endif - for (i = 0; i < MAX_AR_HEIGHT; i++) - kfree(ar->frame[i]); - -out_line_buff: -#if USE_INT - kfree(ar->line_buff); - -out_end: -#endif - v4l2_device_unregister(&ar->v4l2_dev); - return ret; -} - - -static int __init ar_init_module(void) -{ - freq = (boot_cpu_data.bus_clock / 1000000); - printk(KERN_INFO "arv: Bus clock %d\n", freq); - if (freq != 50 && freq != 75) - freq = DEFAULT_FREQ; - return ar_init(); -} - -static void __exit ar_cleanup_module(void) -{ - struct ar *ar; - int i; - - ar = &ardev; - video_unregister_device(&ar->vdev); -#if USE_INT - free_irq(M32R_IRQ_INT3, ar); -#endif - for (i = 0; i < MAX_AR_HEIGHT; i++) - kfree(ar->frame[i]); -#if USE_INT - kfree(ar->line_buff); -#endif - v4l2_device_unregister(&ar->v4l2_dev); -} - -module_init(ar_init_module); -module_exit(ar_cleanup_module); - -MODULE_AUTHOR("Takeo Takahashi <takahashi.takeo@renesas.com>"); -MODULE_DESCRIPTION("Colour AR M64278(VGA) for Video4Linux"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(VERSION); diff --git a/drivers/media/platform/blackfin/Kconfig b/drivers/media/platform/blackfin/Kconfig deleted file mode 100644 index 68fa90151b8f..000000000000 --- a/drivers/media/platform/blackfin/Kconfig +++ /dev/null @@ -1,16 +0,0 @@ -config VIDEO_BLACKFIN_CAPTURE - tristate "Blackfin Video Capture Driver" - depends on VIDEO_V4L2 && BLACKFIN && I2C - depends on HAS_DMA - select VIDEOBUF2_DMA_CONTIG - help - V4L2 bridge driver for Blackfin video capture device. - Choose PPI or EPPI as its interface. - - To compile this driver as a module, choose M here: the - module will be called bfin_capture. - -config VIDEO_BLACKFIN_PPI - tristate - depends on VIDEO_BLACKFIN_CAPTURE - default VIDEO_BLACKFIN_CAPTURE diff --git a/drivers/media/platform/blackfin/Makefile b/drivers/media/platform/blackfin/Makefile deleted file mode 100644 index 30421bc23080..000000000000 --- a/drivers/media/platform/blackfin/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -obj-$(CONFIG_VIDEO_BLACKFIN_CAPTURE) += bfin_capture.o -obj-$(CONFIG_VIDEO_BLACKFIN_PPI) += ppi.o diff --git a/drivers/media/platform/blackfin/bfin_capture.c b/drivers/media/platform/blackfin/bfin_capture.c deleted file mode 100644 index b7660b1000fd..000000000000 --- a/drivers/media/platform/blackfin/bfin_capture.c +++ /dev/null @@ -1,983 +0,0 @@ -/* - * Analog Devices video capture driver - * - * Copyright (c) 2011 Analog Devices Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/completion.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/i2c.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/time.h> -#include <linux/types.h> - -#include <media/v4l2-common.h> -#include <media/v4l2-ctrls.h> -#include <media/v4l2-device.h> -#include <media/v4l2-ioctl.h> -#include <media/videobuf2-dma-contig.h> - -#include <asm/dma.h> - -#include <media/blackfin/bfin_capture.h> -#include <media/blackfin/ppi.h> - -#define CAPTURE_DRV_NAME "bfin_capture" - -struct bcap_format { - char *desc; - u32 pixelformat; - u32 mbus_code; - int bpp; /* bits per pixel */ - int dlen; /* data length for ppi in bits */ -}; - -struct bcap_buffer { - struct vb2_v4l2_buffer vb; - struct list_head list; -}; - -struct bcap_device { - /* capture device instance */ - struct v4l2_device v4l2_dev; - /* v4l2 control handler */ - struct v4l2_ctrl_handler ctrl_handler; - /* device node data */ - struct video_device video_dev; - /* sub device instance */ - struct v4l2_subdev *sd; - /* capture config */ - struct bfin_capture_config *cfg; - /* ppi interface */ - struct ppi_if *ppi; - /* current input */ - unsigned int cur_input; - /* current selected standard */ - v4l2_std_id std; - /* current selected dv_timings */ - struct v4l2_dv_timings dv_timings; - /* used to store pixel format */ - struct v4l2_pix_format fmt; - /* bits per pixel*/ - int bpp; - /* data length for ppi in bits */ - int dlen; - /* used to store sensor supported format */ - struct bcap_format *sensor_formats; - /* number of sensor formats array */ - int num_sensor_formats; - /* pointing to current video buffer */ - struct bcap_buffer *cur_frm; - /* buffer queue used in videobuf2 */ - struct vb2_queue buffer_queue; - /* queue of filled frames */ - struct list_head dma_queue; - /* used in videobuf2 callback */ - spinlock_t lock; - /* used to access capture device */ - struct mutex mutex; - /* used to wait ppi to complete one transfer */ - struct completion comp; - /* prepare to stop */ - bool stop; - /* vb2 buffer sequence counter */ - unsigned sequence; -}; - -static const struct bcap_format bcap_formats[] = { - { - .desc = "YCbCr 4:2:2 Interleaved UYVY", - .pixelformat = V4L2_PIX_FMT_UYVY, - .mbus_code = MEDIA_BUS_FMT_UYVY8_2X8, - .bpp = 16, - .dlen = 8, - }, - { - .desc = "YCbCr 4:2:2 Interleaved YUYV", - .pixelformat = V4L2_PIX_FMT_YUYV, - .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8, - .bpp = 16, - .dlen = 8, - }, - { - .desc = "YCbCr 4:2:2 Interleaved UYVY", - .pixelformat = V4L2_PIX_FMT_UYVY, - .mbus_code = MEDIA_BUS_FMT_UYVY8_1X16, - .bpp = 16, - .dlen = 16, - }, - { - .desc = "RGB 565", - .pixelformat = V4L2_PIX_FMT_RGB565, - .mbus_code = MEDIA_BUS_FMT_RGB565_2X8_LE, - .bpp = 16, - .dlen = 8, - }, - { - .desc = "RGB 444", - .pixelformat = V4L2_PIX_FMT_RGB444, - .mbus_code = MEDIA_BUS_FMT_RGB444_2X8_PADHI_LE, - .bpp = 16, - .dlen = 8, - }, - -}; -#define BCAP_MAX_FMTS ARRAY_SIZE(bcap_formats) - -static irqreturn_t bcap_isr(int irq, void *dev_id); - -static struct bcap_buffer *to_bcap_vb(struct vb2_v4l2_buffer *vb) -{ - return container_of(vb, struct bcap_buffer, vb); -} - -static int bcap_init_sensor_formats(struct bcap_device *bcap_dev) -{ - struct v4l2_subdev_mbus_code_enum code = { - .which = V4L2_SUBDEV_FORMAT_ACTIVE, - }; - struct bcap_format *sf; - unsigned int num_formats = 0; - int i, j; - - while (!v4l2_subdev_call(bcap_dev->sd, pad, - enum_mbus_code, NULL, &code)) { - num_formats++; - code.index++; - } - if (!num_formats) - return -ENXIO; - - sf = kcalloc(num_formats, sizeof(*sf), GFP_KERNEL); - if (!sf) - return -ENOMEM; - - for (i = 0; i < num_formats; i++) { - code.index = i; - v4l2_subdev_call(bcap_dev->sd, pad, - enum_mbus_code, NULL, &code); - for (j = 0; j < BCAP_MAX_FMTS; j++) - if (code.code == bcap_formats[j].mbus_code) - break; - if (j == BCAP_MAX_FMTS) { - /* we don't allow this sensor working with our bridge */ - kfree(sf); - return -EINVAL; - } - sf[i] = bcap_formats[j]; - } - bcap_dev->sensor_formats = sf; - bcap_dev->num_sensor_formats = num_formats; - return 0; -} - -static void bcap_free_sensor_formats(struct bcap_device *bcap_dev) -{ - bcap_dev->num_sensor_formats = 0; - kfree(bcap_dev->sensor_formats); - bcap_dev->sensor_formats = NULL; -} - -static int bcap_queue_setup(struct vb2_queue *vq, - unsigned int *nbuffers, unsigned int *nplanes, - unsigned int sizes[], struct device *alloc_devs[]) -{ - struct bcap_device *bcap_dev = vb2_get_drv_priv(vq); - - if (vq->num_buffers + *nbuffers < 2) - *nbuffers = 2; - - if (*nplanes) - return sizes[0] < bcap_dev->fmt.sizeimage ? -EINVAL : 0; - - *nplanes = 1; - sizes[0] = bcap_dev->fmt.sizeimage; - - return 0; -} - -static int bcap_buffer_prepare(struct vb2_buffer *vb) -{ - struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); - struct bcap_device *bcap_dev = vb2_get_drv_priv(vb->vb2_queue); - unsigned long size = bcap_dev->fmt.sizeimage; - - if (vb2_plane_size(vb, 0) < size) { - v4l2_err(&bcap_dev->v4l2_dev, "buffer too small (%lu < %lu)\n", - vb2_plane_size(vb, 0), size); - return -EINVAL; - } - vb2_set_plane_payload(vb, 0, size); - - vbuf->field = bcap_dev->fmt.field; - - return 0; -} - -static void bcap_buffer_queue(struct vb2_buffer *vb) -{ - struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); - struct bcap_device *bcap_dev = vb2_get_drv_priv(vb->vb2_queue); - struct bcap_buffer *buf = to_bcap_vb(vbuf); - unsigned long flags; - - spin_lock_irqsave(&bcap_dev->lock, flags); - list_add_tail(&buf->list, &bcap_dev->dma_queue); - spin_unlock_irqrestore(&bcap_dev->lock, flags); -} - -static void bcap_buffer_cleanup(struct vb2_buffer *vb) -{ - struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); - struct bcap_device *bcap_dev = vb2_get_drv_priv(vb->vb2_queue); - struct bcap_buffer *buf = to_bcap_vb(vbuf); - unsigned long flags; - - spin_lock_irqsave(&bcap_dev->lock, flags); - list_del_init(&buf->list); - spin_unlock_irqrestore(&bcap_dev->lock, flags); -} - -static int bcap_start_streaming(struct vb2_queue *vq, unsigned int count) -{ - struct bcap_device *bcap_dev = vb2_get_drv_priv(vq); - struct ppi_if *ppi = bcap_dev->ppi; - struct bcap_buffer *buf, *tmp; - struct ppi_params params; - dma_addr_t addr; - int ret; - - /* enable streamon on the sub device */ - ret = v4l2_subdev_call(bcap_dev->sd, video, s_stream, 1); - if (ret && (ret != -ENOIOCTLCMD)) { - v4l2_err(&bcap_dev->v4l2_dev, "stream on failed in subdev\n"); - goto err; - } - - /* set ppi params */ - params.width = bcap_dev->fmt.width; - params.height = bcap_dev->fmt.height; - params.bpp = bcap_dev->bpp; - params.dlen = bcap_dev->dlen; - params.ppi_control = bcap_dev->cfg->ppi_control; - params.int_mask = bcap_dev->cfg->int_mask; - if (bcap_dev->cfg->inputs[bcap_dev->cur_input].capabilities - & V4L2_IN_CAP_DV_TIMINGS) { - struct v4l2_bt_timings *bt = &bcap_dev->dv_timings.bt; - - params.hdelay = bt->hsync + bt->hbackporch; - params.vdelay = bt->vsync + bt->vbackporch; - params.line = V4L2_DV_BT_FRAME_WIDTH(bt); - params.frame = V4L2_DV_BT_FRAME_HEIGHT(bt); - } else if (bcap_dev->cfg->inputs[bcap_dev->cur_input].capabilities - & V4L2_IN_CAP_STD) { - params.hdelay = 0; - params.vdelay = 0; - if (bcap_dev->std & V4L2_STD_525_60) { - params.line = 858; - params.frame = 525; - } else { - params.line = 864; - params.frame = 625; - } - } else { - params.hdelay = 0; - params.vdelay = 0; - params.line = params.width + bcap_dev->cfg->blank_pixels; - params.frame = params.height; - } - ret = ppi->ops->set_params(ppi, ¶ms); - if (ret < 0) { - v4l2_err(&bcap_dev->v4l2_dev, - "Error in setting ppi params\n"); - goto err; - } - - /* attach ppi DMA irq handler */ - ret = ppi->ops->attach_irq(ppi, bcap_isr); - if (ret < 0) { - v4l2_err(&bcap_dev->v4l2_dev, - "Error in attaching interrupt handler\n"); - goto err; - } - - bcap_dev->sequence = 0; - - reinit_completion(&bcap_dev->comp); - bcap_dev->stop = false; - - /* get the next frame from the dma queue */ - bcap_dev->cur_frm = list_entry(bcap_dev->dma_queue.next, - struct bcap_buffer, list); - /* remove buffer from the dma queue */ - list_del_init(&bcap_dev->cur_frm->list); - addr = vb2_dma_contig_plane_dma_addr(&bcap_dev->cur_frm->vb.vb2_buf, - 0); - /* update DMA address */ - ppi->ops->update_addr(ppi, (unsigned long)addr); - /* enable ppi */ - ppi->ops->start(ppi); - - return 0; - -err: - list_for_each_entry_safe(buf, tmp, &bcap_dev->dma_queue, list) { - list_del(&buf->list); - vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED); - } - - return ret; -} - -static void bcap_stop_streaming(struct vb2_queue *vq) -{ - struct bcap_device *bcap_dev = vb2_get_drv_priv(vq); - struct ppi_if *ppi = bcap_dev->ppi; - int ret; - - bcap_dev->stop = true; - wait_for_completion(&bcap_dev->comp); - ppi->ops->stop(ppi); - ppi->ops->detach_irq(ppi); - ret = v4l2_subdev_call(bcap_dev->sd, video, s_stream, 0); - if (ret && (ret != -ENOIOCTLCMD)) - v4l2_err(&bcap_dev->v4l2_dev, - "stream off failed in subdev\n"); - - /* release all active buffers */ - if (bcap_dev->cur_frm) - vb2_buffer_done(&bcap_dev->cur_frm->vb.vb2_buf, - VB2_BUF_STATE_ERROR); - - while (!list_empty(&bcap_dev->dma_queue)) { - bcap_dev->cur_frm = list_entry(bcap_dev->dma_queue.next, - struct bcap_buffer, list); - list_del_init(&bcap_dev->cur_frm->list); - vb2_buffer_done(&bcap_dev->cur_frm->vb.vb2_buf, - VB2_BUF_STATE_ERROR); - } -} - -static const struct vb2_ops bcap_video_qops = { - .queue_setup = bcap_queue_setup, - .buf_prepare = bcap_buffer_prepare, - .buf_cleanup = bcap_buffer_cleanup, - .buf_queue = bcap_buffer_queue, - .wait_prepare = vb2_ops_wait_prepare, - .wait_finish = vb2_ops_wait_finish, - .start_streaming = bcap_start_streaming, - .stop_streaming = bcap_stop_streaming, -}; - -static irqreturn_t bcap_isr(int irq, void *dev_id) -{ - struct ppi_if *ppi = dev_id; - struct bcap_device *bcap_dev = ppi->priv; - struct vb2_v4l2_buffer *vbuf = &bcap_dev->cur_frm->vb; - struct vb2_buffer *vb = &vbuf->vb2_buf; - dma_addr_t addr; - - spin_lock(&bcap_dev->lock); - - if (!list_empty(&bcap_dev->dma_queue)) { - vb->timestamp = ktime_get_ns(); - if (ppi->err) { - vb2_buffer_done(vb, VB2_BUF_STATE_ERROR); - ppi->err = false; - } else { - vbuf->sequence = bcap_dev->sequence++; - vb2_buffer_done(vb, VB2_BUF_STATE_DONE); - } - bcap_dev->cur_frm = list_entry(bcap_dev->dma_queue.next, - struct bcap_buffer, list); - list_del_init(&bcap_dev->cur_frm->list); - } else { - /* clear error flag, we will get a new frame */ - if (ppi->err) - ppi->err = false; - } - - ppi->ops->stop(ppi); - - if (bcap_dev->stop) { - complete(&bcap_dev->comp); - } else { - addr = vb2_dma_contig_plane_dma_addr( - &bcap_dev->cur_frm->vb.vb2_buf, 0); - ppi->ops->update_addr(ppi, (unsigned long)addr); - ppi->ops->start(ppi); - } - - spin_unlock(&bcap_dev->lock); - - return IRQ_HANDLED; -} - -static int bcap_querystd(struct file *file, void *priv, v4l2_std_id *std) -{ - struct bcap_device *bcap_dev = video_drvdata(file); - struct v4l2_input input; - - input = bcap_dev->cfg->inputs[bcap_dev->cur_input]; - if (!(input.capabilities & V4L2_IN_CAP_STD)) - return -ENODATA; - - return v4l2_subdev_call(bcap_dev->sd, video, querystd, std); -} - -static int bcap_g_std(struct file *file, void *priv, v4l2_std_id *std) -{ - struct bcap_device *bcap_dev = video_drvdata(file); - struct v4l2_input input; - - input = bcap_dev->cfg->inputs[bcap_dev->cur_input]; - if (!(input.capabilities & V4L2_IN_CAP_STD)) - return -ENODATA; - - *std = bcap_dev->std; - return 0; -} - -static int bcap_s_std(struct file *file, void *priv, v4l2_std_id std) -{ - struct bcap_device *bcap_dev = video_drvdata(file); - struct v4l2_input input; - int ret; - - input = bcap_dev->cfg->inputs[bcap_dev->cur_input]; - if (!(input.capabilities & V4L2_IN_CAP_STD)) - return -ENODATA; - - if (vb2_is_busy(&bcap_dev->buffer_queue)) - return -EBUSY; - - ret = v4l2_subdev_call(bcap_dev->sd, video, s_std, std); - if (ret < 0) - return ret; - - bcap_dev->std = std; - return 0; -} - -static int bcap_enum_dv_timings(struct file *file, void *priv, - struct v4l2_enum_dv_timings *timings) -{ - struct bcap_device *bcap_dev = video_drvdata(file); - struct v4l2_input input; - - input = bcap_dev->cfg->inputs[bcap_dev->cur_input]; - if (!(input.capabilities & V4L2_IN_CAP_DV_TIMINGS)) - return -ENODATA; - - timings->pad = 0; - - return v4l2_subdev_call(bcap_dev->sd, pad, - enum_dv_timings, timings); -} - -static int bcap_query_dv_timings(struct file *file, void *priv, - struct v4l2_dv_timings *timings) -{ - struct bcap_device *bcap_dev = video_drvdata(file); - struct v4l2_input input; - - input = bcap_dev->cfg->inputs[bcap_dev->cur_input]; - if (!(input.capabilities & V4L2_IN_CAP_DV_TIMINGS)) - return -ENODATA; - - return v4l2_subdev_call(bcap_dev->sd, video, - query_dv_timings, timings); -} - -static int bcap_g_dv_timings(struct file *file, void *priv, - struct v4l2_dv_timings *timings) -{ - struct bcap_device *bcap_dev = video_drvdata(file); - struct v4l2_input input; - - input = bcap_dev->cfg->inputs[bcap_dev->cur_input]; - if (!(input.capabilities & V4L2_IN_CAP_DV_TIMINGS)) - return -ENODATA; - - *timings = bcap_dev->dv_timings; - return 0; -} - -static int bcap_s_dv_timings(struct file *file, void *priv, - struct v4l2_dv_timings *timings) -{ - struct bcap_device *bcap_dev = video_drvdata(file); - struct v4l2_input input; - int ret; - - input = bcap_dev->cfg->inputs[bcap_dev->cur_input]; - if (!(input.capabilities & V4L2_IN_CAP_DV_TIMINGS)) - return -ENODATA; - - if (vb2_is_busy(&bcap_dev->buffer_queue)) - return -EBUSY; - - ret = v4l2_subdev_call(bcap_dev->sd, video, s_dv_timings, timings); - if (ret < 0) - return ret; - - bcap_dev->dv_timings = *timings; - return 0; -} - -static int bcap_enum_input(struct file *file, void *priv, - struct v4l2_input *input) -{ - struct bcap_device *bcap_dev = video_drvdata(file); - struct bfin_capture_config *config = bcap_dev->cfg; - int ret; - u32 status; - - if (input->index >= config->num_inputs) - return -EINVAL; - - *input = config->inputs[input->index]; - /* get input status */ - ret = v4l2_subdev_call(bcap_dev->sd, video, g_input_status, &status); - if (!ret) - input->status = status; - return 0; -} - -static int bcap_g_input(struct file *file, void *priv, unsigned int *index) -{ - struct bcap_device *bcap_dev = video_drvdata(file); - - *index = bcap_dev->cur_input; - return 0; -} - -static int bcap_s_input(struct file *file, void *priv, unsigned int index) -{ - struct bcap_device *bcap_dev = video_drvdata(file); - struct bfin_capture_config *config = bcap_dev->cfg; - struct bcap_route *route; - int ret; - - if (vb2_is_busy(&bcap_dev->buffer_queue)) - return -EBUSY; - - if (index >= config->num_inputs) - return -EINVAL; - - route = &config->routes[index]; - ret = v4l2_subdev_call(bcap_dev->sd, video, s_routing, - route->input, route->output, 0); - if ((ret < 0) && (ret != -ENOIOCTLCMD)) { - v4l2_err(&bcap_dev->v4l2_dev, "Failed to set input\n"); - return ret; - } - bcap_dev->cur_input = index; - /* if this route has specific config, update ppi control */ - if (route->ppi_control) - config->ppi_control = route->ppi_control; - return 0; -} - -static int bcap_try_format(struct bcap_device *bcap, - struct v4l2_pix_format *pixfmt, - struct bcap_format *bcap_fmt) -{ - struct bcap_format *sf = bcap->sensor_formats; - struct bcap_format *fmt = NULL; - struct v4l2_subdev_pad_config pad_cfg; - struct v4l2_subdev_format format = { - .which = V4L2_SUBDEV_FORMAT_TRY, - }; - int ret, i; - - for (i = 0; i < bcap->num_sensor_formats; i++) { - fmt = &sf[i]; - if (pixfmt->pixelformat == fmt->pixelformat) - break; - } - if (i == bcap->num_sensor_formats) - fmt = &sf[0]; - - v4l2_fill_mbus_format(&format.format, pixfmt, fmt->mbus_code); - ret = v4l2_subdev_call(bcap->sd, pad, set_fmt, &pad_cfg, - &format); - if (ret < 0) - return ret; - v4l2_fill_pix_format(pixfmt, &format.format); - if (bcap_fmt) { - for (i = 0; i < bcap->num_sensor_formats; i++) { - fmt = &sf[i]; - if (format.format.code == fmt->mbus_code) - break; - } - *bcap_fmt = *fmt; - } - pixfmt->bytesperline = pixfmt->width * fmt->bpp / 8; - pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; - return 0; -} - -static int bcap_enum_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_fmtdesc *fmt) -{ - struct bcap_device *bcap_dev = video_drvdata(file); - struct bcap_format *sf = bcap_dev->sensor_formats; - - if (fmt->index >= bcap_dev->num_sensor_formats) - return -EINVAL; - - fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - strlcpy(fmt->description, - sf[fmt->index].desc, - sizeof(fmt->description)); - fmt->pixelformat = sf[fmt->index].pixelformat; - return 0; -} - -static int bcap_try_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_format *fmt) -{ - struct bcap_device *bcap_dev = video_drvdata(file); - struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; - - return bcap_try_format(bcap_dev, pixfmt, NULL); -} - -static int bcap_g_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_format *fmt) -{ - struct bcap_device *bcap_dev = video_drvdata(file); - - fmt->fmt.pix = bcap_dev->fmt; - return 0; -} - -static int bcap_s_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_format *fmt) -{ - struct bcap_device *bcap_dev = video_drvdata(file); - struct v4l2_subdev_format format = { - .which = V4L2_SUBDEV_FORMAT_ACTIVE, - }; - struct bcap_format bcap_fmt; - struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; - int ret; - - if (vb2_is_busy(&bcap_dev->buffer_queue)) - return -EBUSY; - - /* see if format works */ - ret = bcap_try_format(bcap_dev, pixfmt, &bcap_fmt); - if (ret < 0) - return ret; - - v4l2_fill_mbus_format(&format.format, pixfmt, bcap_fmt.mbus_code); - ret = v4l2_subdev_call(bcap_dev->sd, pad, set_fmt, NULL, &format); - if (ret < 0) - return ret; - bcap_dev->fmt = *pixfmt; - bcap_dev->bpp = bcap_fmt.bpp; - bcap_dev->dlen = bcap_fmt.dlen; - return 0; -} - -static int bcap_querycap(struct file *file, void *priv, - struct v4l2_capability *cap) -{ - struct bcap_device *bcap_dev = video_drvdata(file); - - cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; - cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; - strlcpy(cap->driver, CAPTURE_DRV_NAME, sizeof(cap->driver)); - strlcpy(cap->bus_info, "Blackfin Platform", sizeof(cap->bus_info)); - strlcpy(cap->card, bcap_dev->cfg->card_name, sizeof(cap->card)); - return 0; -} - -static int bcap_g_parm(struct file *file, void *fh, struct v4l2_streamparm *a) -{ - struct bcap_device *bcap_dev = video_drvdata(file); - - return v4l2_g_parm_cap(video_devdata(file), bcap_dev->sd, a); -} - -static int bcap_s_parm(struct file *file, void *fh, struct v4l2_streamparm *a) -{ - struct bcap_device *bcap_dev = video_drvdata(file); - - return v4l2_s_parm_cap(video_devdata(file), bcap_dev->sd, a); -} - -static int bcap_log_status(struct file *file, void *priv) -{ - struct bcap_device *bcap_dev = video_drvdata(file); - /* status for sub devices */ - v4l2_device_call_all(&bcap_dev->v4l2_dev, 0, core, log_status); - return 0; -} - -static const struct v4l2_ioctl_ops bcap_ioctl_ops = { - .vidioc_querycap = bcap_querycap, - .vidioc_g_fmt_vid_cap = bcap_g_fmt_vid_cap, - .vidioc_enum_fmt_vid_cap = bcap_enum_fmt_vid_cap, - .vidioc_s_fmt_vid_cap = bcap_s_fmt_vid_cap, - .vidioc_try_fmt_vid_cap = bcap_try_fmt_vid_cap, - .vidioc_enum_input = bcap_enum_input, - .vidioc_g_input = bcap_g_input, - .vidioc_s_input = bcap_s_input, - .vidioc_querystd = bcap_querystd, - .vidioc_s_std = bcap_s_std, - .vidioc_g_std = bcap_g_std, - .vidioc_s_dv_timings = bcap_s_dv_timings, - .vidioc_g_dv_timings = bcap_g_dv_timings, - .vidioc_query_dv_timings = bcap_query_dv_timings, - .vidioc_enum_dv_timings = bcap_enum_dv_timings, - .vidioc_reqbufs = vb2_ioctl_reqbufs, - .vidioc_create_bufs = vb2_ioctl_create_bufs, - .vidioc_querybuf = vb2_ioctl_querybuf, - .vidioc_qbuf = vb2_ioctl_qbuf, - .vidioc_dqbuf = vb2_ioctl_dqbuf, - .vidioc_expbuf = vb2_ioctl_expbuf, - .vidioc_streamon = vb2_ioctl_streamon, - .vidioc_streamoff = vb2_ioctl_streamoff, - .vidioc_g_parm = bcap_g_parm, - .vidioc_s_parm = bcap_s_parm, - .vidioc_log_status = bcap_log_status, -}; - -static const struct v4l2_file_operations bcap_fops = { - .owner = THIS_MODULE, - .open = v4l2_fh_open, - .release = vb2_fop_release, - .unlocked_ioctl = video_ioctl2, - .mmap = vb2_fop_mmap, -#ifndef CONFIG_MMU - .get_unmapped_area = vb2_fop_get_unmapped_area, -#endif - .poll = vb2_fop_poll -}; - -static int bcap_probe(struct platform_device *pdev) -{ - struct bcap_device *bcap_dev; - struct video_device *vfd; - struct i2c_adapter *i2c_adap; - struct bfin_capture_config *config; - struct vb2_queue *q; - struct bcap_route *route; - int ret; - - config = pdev->dev.platform_data; - if (!config || !config->num_inputs) { - v4l2_err(pdev->dev.driver, "Unable to get board config\n"); - return -ENODEV; - } - - bcap_dev = kzalloc(sizeof(*bcap_dev), GFP_KERNEL); - if (!bcap_dev) - return -ENOMEM; - - bcap_dev->cfg = config; - - bcap_dev->ppi = ppi_create_instance(pdev, config->ppi_info); - if (!bcap_dev->ppi) { - v4l2_err(pdev->dev.driver, "Unable to create ppi\n"); - ret = -ENODEV; - goto err_free_dev; - } - bcap_dev->ppi->priv = bcap_dev; - - vfd = &bcap_dev->video_dev; - /* initialize field of video device */ - vfd->release = video_device_release_empty; - vfd->fops = &bcap_fops; - vfd->ioctl_ops = &bcap_ioctl_ops; - vfd->tvnorms = 0; - vfd->v4l2_dev = &bcap_dev->v4l2_dev; - strncpy(vfd->name, CAPTURE_DRV_NAME, sizeof(vfd->name)); - - ret = v4l2_device_register(&pdev->dev, &bcap_dev->v4l2_dev); - if (ret) { - v4l2_err(pdev->dev.driver, - "Unable to register v4l2 device\n"); - goto err_free_ppi; - } - v4l2_info(&bcap_dev->v4l2_dev, "v4l2 device registered\n"); - - bcap_dev->v4l2_dev.ctrl_handler = &bcap_dev->ctrl_handler; - ret = v4l2_ctrl_handler_init(&bcap_dev->ctrl_handler, 0); - if (ret) { - v4l2_err(&bcap_dev->v4l2_dev, - "Unable to init control handler\n"); - goto err_unreg_v4l2; - } - - spin_lock_init(&bcap_dev->lock); - /* initialize queue */ - q = &bcap_dev->buffer_queue; - q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - q->io_modes = VB2_MMAP | VB2_DMABUF; - q->drv_priv = bcap_dev; - q->buf_struct_size = sizeof(struct bcap_buffer); - q->ops = &bcap_video_qops; - q->mem_ops = &vb2_dma_contig_memops; - q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; - q->lock = &bcap_dev->mutex; - q->min_buffers_needed = 1; - q->dev = &pdev->dev; - - ret = vb2_queue_init(q); - if (ret) - goto err_free_handler; - - mutex_init(&bcap_dev->mutex); - init_completion(&bcap_dev->comp); - - /* init video dma queues */ - INIT_LIST_HEAD(&bcap_dev->dma_queue); - - vfd->lock = &bcap_dev->mutex; - vfd->queue = q; - - /* register video device */ - ret = video_register_device(&bcap_dev->video_dev, VFL_TYPE_GRABBER, -1); - if (ret) { - v4l2_err(&bcap_dev->v4l2_dev, - "Unable to register video device\n"); - goto err_free_handler; - } - video_set_drvdata(&bcap_dev->video_dev, bcap_dev); - v4l2_info(&bcap_dev->v4l2_dev, "video device registered as: %s\n", - video_device_node_name(vfd)); - - /* load up the subdevice */ - i2c_adap = i2c_get_adapter(config->i2c_adapter_id); - if (!i2c_adap) { - v4l2_err(&bcap_dev->v4l2_dev, - "Unable to find i2c adapter\n"); - ret = -ENODEV; - goto err_unreg_vdev; - - } - bcap_dev->sd = v4l2_i2c_new_subdev_board(&bcap_dev->v4l2_dev, - i2c_adap, - &config->board_info, - NULL); - if (bcap_dev->sd) { - int i; - - /* update tvnorms from the sub devices */ - for (i = 0; i < config->num_inputs; i++) - vfd->tvnorms |= config->inputs[i].std; - } else { - v4l2_err(&bcap_dev->v4l2_dev, - "Unable to register sub device\n"); - ret = -ENODEV; - goto err_unreg_vdev; - } - - v4l2_info(&bcap_dev->v4l2_dev, "v4l2 sub device registered\n"); - - /* - * explicitly set input, otherwise some boards - * may not work at the state as we expected - */ - route = &config->routes[0]; - ret = v4l2_subdev_call(bcap_dev->sd, video, s_routing, - route->input, route->output, 0); - if ((ret < 0) && (ret != -ENOIOCTLCMD)) { - v4l2_err(&bcap_dev->v4l2_dev, "Failed to set input\n"); - goto err_unreg_vdev; - } - bcap_dev->cur_input = 0; - /* if this route has specific config, update ppi control */ - if (route->ppi_control) - config->ppi_control = route->ppi_control; - - /* now we can probe the default state */ - if (config->inputs[0].capabilities & V4L2_IN_CAP_STD) { - v4l2_std_id std; - ret = v4l2_subdev_call(bcap_dev->sd, video, g_std, &std); - if (ret) { - v4l2_err(&bcap_dev->v4l2_dev, - "Unable to get std\n"); - goto err_unreg_vdev; - } - bcap_dev->std = std; - } - if (config->inputs[0].capabilities & V4L2_IN_CAP_DV_TIMINGS) { - struct v4l2_dv_timings dv_timings; - ret = v4l2_subdev_call(bcap_dev->sd, video, - g_dv_timings, &dv_timings); - if (ret) { - v4l2_err(&bcap_dev->v4l2_dev, - "Unable to get dv timings\n"); - goto err_unreg_vdev; - } - bcap_dev->dv_timings = dv_timings; - } - ret = bcap_init_sensor_formats(bcap_dev); - if (ret) { - v4l2_err(&bcap_dev->v4l2_dev, - "Unable to create sensor formats table\n"); - goto err_unreg_vdev; - } - return 0; -err_unreg_vdev: - video_unregister_device(&bcap_dev->video_dev); -err_free_handler: - v4l2_ctrl_handler_free(&bcap_dev->ctrl_handler); -err_unreg_v4l2: - v4l2_device_unregister(&bcap_dev->v4l2_dev); -err_free_ppi: - ppi_delete_instance(bcap_dev->ppi); -err_free_dev: - kfree(bcap_dev); - return ret; -} - -static int bcap_remove(struct platform_device *pdev) -{ - struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev); - struct bcap_device *bcap_dev = container_of(v4l2_dev, - struct bcap_device, v4l2_dev); - - bcap_free_sensor_formats(bcap_dev); - video_unregister_device(&bcap_dev->video_dev); - v4l2_ctrl_handler_free(&bcap_dev->ctrl_handler); - v4l2_device_unregister(v4l2_dev); - ppi_delete_instance(bcap_dev->ppi); - kfree(bcap_dev); - return 0; -} - -static struct platform_driver bcap_driver = { - .driver = { - .name = CAPTURE_DRV_NAME, - }, - .probe = bcap_probe, - .remove = bcap_remove, -}; -module_platform_driver(bcap_driver); - -MODULE_DESCRIPTION("Analog Devices blackfin video capture driver"); -MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/platform/blackfin/ppi.c b/drivers/media/platform/blackfin/ppi.c deleted file mode 100644 index d3dc765c1609..000000000000 --- a/drivers/media/platform/blackfin/ppi.c +++ /dev/null @@ -1,361 +0,0 @@ -/* - * ppi.c Analog Devices Parallel Peripheral Interface driver - * - * Copyright (c) 2011 Analog Devices Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/platform_device.h> - -#include <asm/bfin_ppi.h> -#include <asm/blackfin.h> -#include <asm/cacheflush.h> -#include <asm/dma.h> -#include <asm/portmux.h> - -#include <media/blackfin/ppi.h> - -static int ppi_attach_irq(struct ppi_if *ppi, irq_handler_t handler); -static void ppi_detach_irq(struct ppi_if *ppi); -static int ppi_start(struct ppi_if *ppi); -static int ppi_stop(struct ppi_if *ppi); -static int ppi_set_params(struct ppi_if *ppi, struct ppi_params *params); -static void ppi_update_addr(struct ppi_if *ppi, unsigned long addr); - -static const struct ppi_ops ppi_ops = { - .attach_irq = ppi_attach_irq, - .detach_irq = ppi_detach_irq, - .start = ppi_start, - .stop = ppi_stop, - .set_params = ppi_set_params, - .update_addr = ppi_update_addr, -}; - -static irqreturn_t ppi_irq_err(int irq, void *dev_id) -{ - struct ppi_if *ppi = dev_id; - const struct ppi_info *info = ppi->info; - - switch (info->type) { - case PPI_TYPE_PPI: - { - struct bfin_ppi_regs *reg = info->base; - unsigned short status; - - /* register on bf561 is cleared when read - * others are W1C - */ - status = bfin_read16(®->status); - if (status & 0x3000) - ppi->err = true; - bfin_write16(®->status, 0xff00); - break; - } - case PPI_TYPE_EPPI: - { - struct bfin_eppi_regs *reg = info->base; - unsigned short status; - - status = bfin_read16(®->status); - if (status & 0x2) - ppi->err = true; - bfin_write16(®->status, 0xffff); - break; - } - case PPI_TYPE_EPPI3: - { - struct bfin_eppi3_regs *reg = info->base; - unsigned long stat; - - stat = bfin_read32(®->stat); - if (stat & 0x2) - ppi->err = true; - bfin_write32(®->stat, 0xc0ff); - break; - } - default: - break; - } - - return IRQ_HANDLED; -} - -static int ppi_attach_irq(struct ppi_if *ppi, irq_handler_t handler) -{ - const struct ppi_info *info = ppi->info; - int ret; - - ret = request_dma(info->dma_ch, "PPI_DMA"); - - if (ret) { - pr_err("Unable to allocate DMA channel for PPI\n"); - return ret; - } - set_dma_callback(info->dma_ch, handler, ppi); - - if (ppi->err_int) { - ret = request_irq(info->irq_err, ppi_irq_err, 0, "PPI ERROR", ppi); - if (ret) { - pr_err("Unable to allocate IRQ for PPI\n"); - free_dma(info->dma_ch); - } - } - return ret; -} - -static void ppi_detach_irq(struct ppi_if *ppi) -{ - const struct ppi_info *info = ppi->info; - - if (ppi->err_int) - free_irq(info->irq_err, ppi); - free_dma(info->dma_ch); -} - -static int ppi_start(struct ppi_if *ppi) -{ - const struct ppi_info *info = ppi->info; - - /* enable DMA */ - enable_dma(info->dma_ch); - - /* enable PPI */ - ppi->ppi_control |= PORT_EN; - switch (info->type) { - case PPI_TYPE_PPI: - { - struct bfin_ppi_regs *reg = info->base; - bfin_write16(®->control, ppi->ppi_control); - break; - } - case PPI_TYPE_EPPI: - { - struct bfin_eppi_regs *reg = info->base; - bfin_write32(®->control, ppi->ppi_control); - break; - } - case PPI_TYPE_EPPI3: - { - struct bfin_eppi3_regs *reg = info->base; - bfin_write32(®->ctl, ppi->ppi_control); - break; - } - default: - return -EINVAL; - } - - SSYNC(); - return 0; -} - -static int ppi_stop(struct ppi_if *ppi) -{ - const struct ppi_info *info = ppi->info; - - /* disable PPI */ - ppi->ppi_control &= ~PORT_EN; - switch (info->type) { - case PPI_TYPE_PPI: - { - struct bfin_ppi_regs *reg = info->base; - bfin_write16(®->control, ppi->ppi_control); - break; - } - case PPI_TYPE_EPPI: - { - struct bfin_eppi_regs *reg = info->base; - bfin_write32(®->control, ppi->ppi_control); - break; - } - case PPI_TYPE_EPPI3: - { - struct bfin_eppi3_regs *reg = info->base; - bfin_write32(®->ctl, ppi->ppi_control); - break; - } - default: - return -EINVAL; - } - - /* disable DMA */ - clear_dma_irqstat(info->dma_ch); - disable_dma(info->dma_ch); - - SSYNC(); - return 0; -} - -static int ppi_set_params(struct ppi_if *ppi, struct ppi_params *params) -{ - const struct ppi_info *info = ppi->info; - int dma32 = 0; - int dma_config, bytes_per_line; - int hcount, hdelay, samples_per_line; - -#ifdef CONFIG_PINCTRL - static const char * const pin_state[] = {"8bit", "16bit", "24bit"}; - struct pinctrl *pctrl; - struct pinctrl_state *pstate; - - if (params->dlen > 24 || params->dlen <= 0) - return -EINVAL; - pctrl = devm_pinctrl_get(ppi->dev); - if (IS_ERR(pctrl)) - return PTR_ERR(pctrl); - pstate = pinctrl_lookup_state(pctrl, - pin_state[(params->dlen + 7) / 8 - 1]); - if (pinctrl_select_state(pctrl, pstate)) - return -EINVAL; -#endif - - bytes_per_line = params->width * params->bpp / 8; - /* convert parameters unit from pixels to samples */ - hcount = params->width * params->bpp / params->dlen; - hdelay = params->hdelay * params->bpp / params->dlen; - samples_per_line = params->line * params->bpp / params->dlen; - if (params->int_mask == 0xFFFFFFFF) - ppi->err_int = false; - else - ppi->err_int = true; - - dma_config = (DMA_FLOW_STOP | RESTART | DMA2D | DI_EN_Y); - ppi->ppi_control = params->ppi_control & ~PORT_EN; - if (!(ppi->ppi_control & PORT_DIR)) - dma_config |= WNR; - switch (info->type) { - case PPI_TYPE_PPI: - { - struct bfin_ppi_regs *reg = info->base; - - if (params->ppi_control & DMA32) - dma32 = 1; - - bfin_write16(®->control, ppi->ppi_control); - bfin_write16(®->count, samples_per_line - 1); - bfin_write16(®->frame, params->frame); - break; - } - case PPI_TYPE_EPPI: - { - struct bfin_eppi_regs *reg = info->base; - - if ((params->ppi_control & PACK_EN) - || (params->ppi_control & 0x38000) > DLEN_16) - dma32 = 1; - - bfin_write32(®->control, ppi->ppi_control); - bfin_write16(®->line, samples_per_line); - bfin_write16(®->frame, params->frame); - bfin_write16(®->hdelay, hdelay); - bfin_write16(®->vdelay, params->vdelay); - bfin_write16(®->hcount, hcount); - bfin_write16(®->vcount, params->height); - break; - } - case PPI_TYPE_EPPI3: - { - struct bfin_eppi3_regs *reg = info->base; - - if ((params->ppi_control & PACK_EN) - || (params->ppi_control & 0x70000) > DLEN_16) - dma32 = 1; - - bfin_write32(®->ctl, ppi->ppi_control); - bfin_write32(®->line, samples_per_line); - bfin_write32(®->frame, params->frame); - bfin_write32(®->hdly, hdelay); - bfin_write32(®->vdly, params->vdelay); - bfin_write32(®->hcnt, hcount); - bfin_write32(®->vcnt, params->height); - if (params->int_mask) - bfin_write32(®->imsk, params->int_mask & 0xFF); - if (ppi->ppi_control & PORT_DIR) { - u32 hsync_width, vsync_width, vsync_period; - - hsync_width = params->hsync - * params->bpp / params->dlen; - vsync_width = params->vsync * samples_per_line; - vsync_period = samples_per_line * params->frame; - bfin_write32(®->fs1_wlhb, hsync_width); - bfin_write32(®->fs1_paspl, samples_per_line); - bfin_write32(®->fs2_wlvb, vsync_width); - bfin_write32(®->fs2_palpf, vsync_period); - } - break; - } - default: - return -EINVAL; - } - - if (dma32) { - dma_config |= WDSIZE_32 | PSIZE_32; - set_dma_x_count(info->dma_ch, bytes_per_line >> 2); - set_dma_x_modify(info->dma_ch, 4); - set_dma_y_modify(info->dma_ch, 4); - } else { - dma_config |= WDSIZE_16 | PSIZE_16; - set_dma_x_count(info->dma_ch, bytes_per_line >> 1); - set_dma_x_modify(info->dma_ch, 2); - set_dma_y_modify(info->dma_ch, 2); - } - set_dma_y_count(info->dma_ch, params->height); - set_dma_config(info->dma_ch, dma_config); - - SSYNC(); - return 0; -} - -static void ppi_update_addr(struct ppi_if *ppi, unsigned long addr) -{ - set_dma_start_addr(ppi->info->dma_ch, addr); -} - -struct ppi_if *ppi_create_instance(struct platform_device *pdev, - const struct ppi_info *info) -{ - struct ppi_if *ppi; - - if (!info || !info->pin_req) - return NULL; - -#ifndef CONFIG_PINCTRL - if (peripheral_request_list(info->pin_req, KBUILD_MODNAME)) { - dev_err(&pdev->dev, "request peripheral failed\n"); - return NULL; - } -#endif - - ppi = kzalloc(sizeof(*ppi), GFP_KERNEL); - if (!ppi) { - peripheral_free_list(info->pin_req); - return NULL; - } - ppi->ops = &ppi_ops; - ppi->info = info; - ppi->dev = &pdev->dev; - - pr_info("ppi probe success\n"); - return ppi; -} -EXPORT_SYMBOL(ppi_create_instance); - -void ppi_delete_instance(struct ppi_if *ppi) -{ - peripheral_free_list(ppi->info->pin_req); - kfree(ppi); -} -EXPORT_SYMBOL(ppi_delete_instance); - -MODULE_DESCRIPTION("Analog Devices PPI driver"); -MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/platform/qcom/venus/hfi.c b/drivers/media/platform/qcom/venus/hfi.c index 1baf78d3c02d..bca894a00c07 100644 --- a/drivers/media/platform/qcom/venus/hfi.c +++ b/drivers/media/platform/qcom/venus/hfi.c @@ -106,8 +106,8 @@ int hfi_core_deinit(struct venus_core *core, bool blocking) if (!empty) { mutex_unlock(&core->lock); - wait_on_atomic_t(&core->insts_count, atomic_t_wait, - TASK_UNINTERRUPTIBLE); + wait_var_event(&core->insts_count, + !atomic_read(&core->insts_count)); mutex_lock(&core->lock); } @@ -229,8 +229,8 @@ void hfi_session_destroy(struct venus_inst *inst) mutex_lock(&core->lock); list_del_init(&inst->list); - atomic_dec(&core->insts_count); - wake_up_atomic_t(&core->insts_count); + if (atomic_dec_and_test(&core->insts_count)) + wake_up_var(&core->insts_count); mutex_unlock(&core->lock); } EXPORT_SYMBOL_GPL(hfi_session_destroy); diff --git a/drivers/media/platform/tegra-cec/tegra_cec.c b/drivers/media/platform/tegra-cec/tegra_cec.c index 92f93a880015..aba488cd0e64 100644 --- a/drivers/media/platform/tegra-cec/tegra_cec.c +++ b/drivers/media/platform/tegra-cec/tegra_cec.c @@ -172,16 +172,13 @@ static irqreturn_t tegra_cec_irq_handler(int irq, void *data) } } - if (status & (TEGRA_CEC_INT_STAT_RX_REGISTER_OVERRUN | - TEGRA_CEC_INT_STAT_RX_BUS_ANOMALY_DETECTED | - TEGRA_CEC_INT_STAT_RX_START_BIT_DETECTED | - TEGRA_CEC_INT_STAT_RX_BUS_ERROR_DETECTED)) { + if (status & TEGRA_CEC_INT_STAT_RX_START_BIT_DETECTED) { cec_write(cec, TEGRA_CEC_INT_STAT, - (TEGRA_CEC_INT_STAT_RX_REGISTER_OVERRUN | - TEGRA_CEC_INT_STAT_RX_BUS_ANOMALY_DETECTED | - TEGRA_CEC_INT_STAT_RX_START_BIT_DETECTED | - TEGRA_CEC_INT_STAT_RX_BUS_ERROR_DETECTED)); - } else if (status & TEGRA_CEC_INT_STAT_RX_REGISTER_FULL) { + TEGRA_CEC_INT_STAT_RX_START_BIT_DETECTED); + cec->rx_done = false; + cec->rx_buf_cnt = 0; + } + if (status & TEGRA_CEC_INT_STAT_RX_REGISTER_FULL) { u32 v; cec_write(cec, TEGRA_CEC_INT_STAT, @@ -255,7 +252,7 @@ static int tegra_cec_adap_enable(struct cec_adapter *adap, bool enable) TEGRA_CEC_INT_MASK_TX_BUS_ANOMALY_DETECTED | TEGRA_CEC_INT_MASK_TX_FRAME_TRANSMITTED | TEGRA_CEC_INT_MASK_RX_REGISTER_FULL | - TEGRA_CEC_INT_MASK_RX_REGISTER_OVERRUN); + TEGRA_CEC_INT_MASK_RX_START_BIT_DETECTED); cec_write(cec, TEGRA_CEC_HW_CONTROL, TEGRA_CEC_HWCTRL_TX_RX_MODE); return 0; |