summaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb/frontends/cx24116.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/dvb/frontends/cx24116.c')
-rw-r--r--drivers/media/dvb/frontends/cx24116.c1423
1 files changed, 1423 insertions, 0 deletions
diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c
new file mode 100644
index 000000000000..deb36f469ada
--- /dev/null
+++ b/drivers/media/dvb/frontends/cx24116.c
@@ -0,0 +1,1423 @@
+/*
+ Conexant cx24116/cx24118 - DVBS/S2 Satellite demod/tuner driver
+
+ Copyright (C) 2006-2008 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2006-2007 Georg Acher
+ Copyright (C) 2007-2008 Darron Broad
+ March 2007
+ Fixed some bugs.
+ Added diseqc support.
+ Added corrected signal strength support.
+ August 2007
+ Sync with legacy version.
+ Some clean ups.
+ Copyright (C) 2008 Igor Liplianin
+ September, 9th 2008
+ Fixed locking on high symbol rates (>30000).
+ Implement MPEG initialization parameter.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/firmware.h>
+
+#include "dvb_frontend.h"
+#include "cx24116.h"
+
+static int debug = 0;
+#define dprintk(args...) \
+ do { \
+ if (debug) printk ("cx24116: " args); \
+ } while (0)
+
+#define CX24116_DEFAULT_FIRMWARE "dvb-fe-cx24116.fw"
+#define CX24116_SEARCH_RANGE_KHZ 5000
+
+/* known registers */
+#define CX24116_REG_COMMAND (0x00) /* command args 0x00..0x1e */
+#define CX24116_REG_EXECUTE (0x1f) /* execute command */
+#define CX24116_REG_MAILBOX (0x96) /* FW or multipurpose mailbox? */
+#define CX24116_REG_RESET (0x20) /* reset status > 0 */
+#define CX24116_REG_SIGNAL (0x9e) /* signal low */
+#define CX24116_REG_SSTATUS (0x9d) /* signal high / status */
+#define CX24116_REG_QUALITY8 (0xa3)
+#define CX24116_REG_QSTATUS (0xbc)
+#define CX24116_REG_QUALITY0 (0xd5)
+#define CX24116_REG_BER0 (0xc9)
+#define CX24116_REG_BER8 (0xc8)
+#define CX24116_REG_BER16 (0xc7)
+#define CX24116_REG_BER24 (0xc6)
+#define CX24116_REG_UCB0 (0xcb)
+#define CX24116_REG_UCB8 (0xca)
+#define CX24116_REG_CLKDIV (0xf3)
+#define CX24116_REG_RATEDIV (0xf9)
+#define CX24116_REG_FECSTATUS (0x9c) /* configured fec (not tuned) or actual FEC (tuned) 1=1/2 2=2/3 etc */
+
+/* FECSTATUS bits */
+#define CX24116_FEC_FECMASK (0x1f) /* mask to determine configured fec (not tuned) or actual fec (tuned) */
+#define CX24116_FEC_DVBS (0x20) /* Select DVB-S demodulator, else DVB-S2 */
+#define CX24116_FEC_UNKNOWN (0x40) /* Unknown/unused */
+#define CX24116_FEC_PILOT (0x80) /* Pilot mode requested when tuning else always reset when tuned */
+
+/* arg buffer size */
+#define CX24116_ARGLEN (0x1e)
+
+/* rolloff */
+#define CX24116_ROLLOFF_020 (0x00)
+#define CX24116_ROLLOFF_025 (0x01)
+#define CX24116_ROLLOFF_035 (0x02)
+
+/* pilot bit */
+#define CX24116_PILOT_OFF (0x00)
+#define CX24116_PILOT_ON (0x40)
+
+/* signal status */
+#define CX24116_HAS_SIGNAL (0x01)
+#define CX24116_HAS_CARRIER (0x02)
+#define CX24116_HAS_VITERBI (0x04)
+#define CX24116_HAS_SYNCLOCK (0x08)
+#define CX24116_HAS_UNKNOWN1 (0x10)
+#define CX24116_HAS_UNKNOWN2 (0x20)
+#define CX24116_STATUS_MASK (0x3f)
+#define CX24116_SIGNAL_MASK (0xc0)
+
+#define CX24116_DISEQC_TONEOFF (0) /* toneburst never sent */
+#define CX24116_DISEQC_TONECACHE (1) /* toneburst cached */
+#define CX24116_DISEQC_MESGCACHE (2) /* message cached */
+
+/* arg offset for DiSEqC */
+#define CX24116_DISEQC_BURST (1)
+#define CX24116_DISEQC_ARG2_2 (2) /* unknown value=2 */
+#define CX24116_DISEQC_ARG3_0 (3) /* unknown value=0 */
+#define CX24116_DISEQC_ARG4_0 (4) /* unknown value=0 */
+#define CX24116_DISEQC_MSGLEN (5)
+#define CX24116_DISEQC_MSGOFS (6)
+
+/* DiSEqC burst */
+#define CX24116_DISEQC_MINI_A (0)
+#define CX24116_DISEQC_MINI_B (1)
+
+/* DiSEqC tone burst */
+static int toneburst = 1;
+
+/* SNR measurements */
+static int esno_snr = 0;
+
+enum cmds
+{
+ CMD_SET_VCO = 0x10,
+ CMD_TUNEREQUEST = 0x11,
+ CMD_MPEGCONFIG = 0x13,
+ CMD_TUNERINIT = 0x14,
+ CMD_BANDWIDTH = 0x15,
+ CMD_GETAGC = 0x19,
+ CMD_LNBCONFIG = 0x20,
+ CMD_LNBSEND = 0x21, /* Formerly CMD_SEND_DISEQC */
+ CMD_SET_TONEPRE = 0x22,
+ CMD_SET_TONE = 0x23,
+ CMD_UPDFWVERS = 0x35,
+ CMD_TUNERSLEEP = 0x36,
+ CMD_AGCCONTROL = 0x3b, /* Unknown */
+};
+
+/* The Demod/Tuner can't easily provide these, we cache them */
+struct cx24116_tuning
+{
+ u32 frequency;
+ u32 symbol_rate;
+ fe_spectral_inversion_t inversion;
+ fe_code_rate_t fec;
+
+ fe_modulation_t modulation;
+ fe_pilot_t pilot;
+ fe_rolloff_t rolloff;
+
+ /* Demod values */
+ u8 fec_val;
+ u8 fec_mask;
+ u8 inversion_val;
+ u8 pilot_val;
+ u8 rolloff_val;
+};
+
+/* Basic commands that are sent to the firmware */
+struct cx24116_cmd
+{
+ u8 len;
+ u8 args[CX24116_ARGLEN];
+};
+
+struct cx24116_state
+{
+ struct i2c_adapter* i2c;
+ const struct cx24116_config* config;
+
+ struct dvb_frontend frontend;
+
+ struct cx24116_tuning dcur;
+ struct cx24116_tuning dnxt;
+
+ u8 skip_fw_load;
+ u8 burst;
+ struct cx24116_cmd dsec_cmd;
+};
+
+static int cx24116_writereg(struct cx24116_state* state, int reg, int data)
+{
+ u8 buf[] = { reg, data };
+ struct i2c_msg msg = { .addr = state->config->demod_address,
+ .flags = 0, .buf = buf, .len = 2 };
+ int err;
+
+ if (debug>1)
+ printk("cx24116: %s: write reg 0x%02x, value 0x%02x\n",
+ __func__,reg, data);
+
+ if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
+ printk("%s: writereg error(err == %i, reg == 0x%02x,"
+ " value == 0x%02x)\n", __func__, err, reg, data);
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+/* Bulk byte writes to a single I2C address, for 32k firmware load */
+static int cx24116_writeregN(struct cx24116_state* state, int reg, u8 *data, u16 len)
+{
+ int ret = -EREMOTEIO;
+ struct i2c_msg msg;
+ u8 *buf;
+
+ buf = kmalloc(len + 1, GFP_KERNEL);
+ if (buf == NULL) {
+ printk("Unable to kmalloc\n");
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ *(buf) = reg;
+ memcpy(buf + 1, data, len);
+
+ msg.addr = state->config->demod_address;
+ msg.flags = 0;
+ msg.buf = buf;
+ msg.len = len + 1;
+
+ if (debug>1)
+ printk("cx24116: %s: write regN 0x%02x, len = %d\n",
+ __func__,reg, len);
+
+ if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1) {
+ printk("%s: writereg error(err == %i, reg == 0x%02x\n",
+ __func__, ret, reg);
+ ret = -EREMOTEIO;
+ }
+
+error:
+ kfree(buf);
+
+ return ret;
+}
+
+static int cx24116_readreg(struct cx24116_state* state, u8 reg)
+{
+ int ret;
+ u8 b0[] = { reg };
+ u8 b1[] = { 0 };
+ struct i2c_msg msg[] = {
+ { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 },
+ { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 }
+ };
+
+ ret = i2c_transfer(state->i2c, msg, 2);
+
+ if (ret != 2) {
+ printk("%s: reg=0x%x (error=%d)\n", __func__, reg, ret);
+ return ret;
+ }
+
+ if (debug>1)
+ printk("cx24116: read reg 0x%02x, value 0x%02x\n",reg, b1[0]);
+
+ return b1[0];
+}
+
+static int cx24116_set_inversion(struct cx24116_state* state, fe_spectral_inversion_t inversion)
+{
+ dprintk("%s(%d)\n", __func__, inversion);
+
+ switch (inversion) {
+ case INVERSION_OFF:
+ state->dnxt.inversion_val = 0x00;
+ break;
+ case INVERSION_ON:
+ state->dnxt.inversion_val = 0x04;
+ break;
+ case INVERSION_AUTO:
+ state->dnxt.inversion_val = 0x0C;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ state->dnxt.inversion = inversion;
+
+ return 0;
+}
+
+/*
+ * modfec (modulation and FEC)
+ * ===========================
+ *
+ * MOD FEC mask/val standard
+ * ---- -------- ----------- --------
+ * QPSK FEC_1_2 0x02 0x02+X DVB-S
+ * QPSK FEC_2_3 0x04 0x02+X DVB-S
+ * QPSK FEC_3_4 0x08 0x02+X DVB-S
+ * QPSK FEC_4_5 0x10 0x02+X DVB-S (?)
+ * QPSK FEC_5_6 0x20 0x02+X DVB-S
+ * QPSK FEC_6_7 0x40 0x02+X DVB-S
+ * QPSK FEC_7_8 0x80 0x02+X DVB-S
+ * QPSK FEC_8_9 0x01 0x02+X DVB-S (?) (NOT SUPPORTED?)
+ * QPSK AUTO 0xff 0x02+X DVB-S
+ *
+ * For DVB-S high byte probably represents FEC
+ * and low byte selects the modulator. The high
+ * byte is search range mask. Bit 5 may turn
+ * on DVB-S and remaining bits represent some
+ * kind of calibration (how/what i do not know).
+ *
+ * Eg.(2/3) szap "Zone Horror"
+ *
+ * mask/val = 0x04, 0x20
+ * status 1f | signal c3c0 | snr a333 | ber 00000098 | unc 00000000 | FE_HAS_LOCK
+ *
+ * mask/val = 0x04, 0x30
+ * status 1f | signal c3c0 | snr a333 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
+ *
+ * After tuning FECSTATUS contains actual FEC
+ * in use numbered 1 through to 8 for 1/2 .. 2/3 etc
+ *
+ * NBC=NOT/NON BACKWARD COMPATIBLE WITH DVB-S (DVB-S2 only)
+ *
+ * NBC-QPSK FEC_1_2 0x00, 0x04 DVB-S2
+ * NBC-QPSK FEC_3_5 0x00, 0x05 DVB-S2
+ * NBC-QPSK FEC_2_3 0x00, 0x06 DVB-S2
+ * NBC-QPSK FEC_3_4 0x00, 0x07 DVB-S2
+ * NBC-QPSK FEC_4_5 0x00, 0x08 DVB-S2
+ * NBC-QPSK FEC_5_6 0x00, 0x09 DVB-S2
+ * NBC-QPSK FEC_8_9 0x00, 0x0a DVB-S2
+ * NBC-QPSK FEC_9_10 0x00, 0x0b DVB-S2
+ *
+ * NBC-8PSK FEC_3_5 0x00, 0x0c DVB-S2
+ * NBC-8PSK FEC_2_3 0x00, 0x0d DVB-S2
+ * NBC-8PSK FEC_3_4 0x00, 0x0e DVB-S2
+ * NBC-8PSK FEC_5_6 0x00, 0x0f DVB-S2
+ * NBC-8PSK FEC_8_9 0x00, 0x10 DVB-S2
+ * NBC-8PSK FEC_9_10 0x00, 0x11 DVB-S2
+ *
+ * For DVB-S2 low bytes selects both modulator
+ * and FEC. High byte is meaningless here. To
+ * set pilot, bit 6 (0x40) is set. When inspecting
+ * FECSTATUS bit 7 (0x80) represents the pilot
+ * selection whilst not tuned. When tuned, actual FEC
+ * in use is found in FECSTATUS as per above. Pilot
+ * value is reset.
+ */
+
+/* A table of modulation, fec and configuration bytes for the demod.
+ * Not all S2 mmodulation schemes are support and not all rates with
+ * a scheme are support. Especially, no auto detect when in S2 mode.
+ */
+struct cx24116_modfec {
+ fe_delivery_system_t delivery_system;
+ fe_modulation_t modulation;
+ fe_code_rate_t fec;
+ u8 mask; /* In DVBS mode this is used to autodetect */
+ u8 val; /* Passed to the firmware to indicate mode selection */
+} CX24116_MODFEC_MODES[] = {
+ /* QPSK. For unknown rates we set hardware to auto detect 0xfe 0x30 */
+
+ /*mod fec mask val */
+ { SYS_DVBS, QPSK, FEC_NONE, 0xfe, 0x30 },
+ { SYS_DVBS, QPSK, FEC_1_2, 0x02, 0x2e }, /* 00000010 00101110 */
+ { SYS_DVBS, QPSK, FEC_2_3, 0x04, 0x2f }, /* 00000100 00101111 */
+ { SYS_DVBS, QPSK, FEC_3_4, 0x08, 0x30 }, /* 00001000 00110000 */
+ { SYS_DVBS, QPSK, FEC_4_5, 0xfe, 0x30 }, /* 000?0000 ? */
+ { SYS_DVBS, QPSK, FEC_5_6, 0x20, 0x31 }, /* 00100000 00110001 */
+ { SYS_DVBS, QPSK, FEC_6_7, 0xfe, 0x30 }, /* 0?000000 ? */
+ { SYS_DVBS, QPSK, FEC_7_8, 0x80, 0x32 }, /* 10000000 00110010 */
+ { SYS_DVBS, QPSK, FEC_8_9, 0xfe, 0x30 }, /* 0000000? ? */
+ { SYS_DVBS, QPSK, FEC_AUTO, 0xfe, 0x30 },
+ /* NBC-QPSK */
+ { SYS_DVBS2, QPSK, FEC_1_2, 0x00, 0x04 },
+ { SYS_DVBS2, QPSK, FEC_3_5, 0x00, 0x05 },
+ { SYS_DVBS2, QPSK, FEC_2_3, 0x00, 0x06 },
+ { SYS_DVBS2, QPSK, FEC_3_4, 0x00, 0x07 },
+ { SYS_DVBS2, QPSK, FEC_4_5, 0x00, 0x08 },
+ { SYS_DVBS2, QPSK, FEC_5_6, 0x00, 0x09 },
+ { SYS_DVBS2, QPSK, FEC_8_9, 0x00, 0x0a },
+ { SYS_DVBS2, QPSK, FEC_9_10, 0x00, 0x0b },
+ /* 8PSK */
+ { SYS_DVBS2, PSK_8, FEC_3_5, 0x00, 0x0c },
+ { SYS_DVBS2, PSK_8, FEC_2_3, 0x00, 0x0d },
+ { SYS_DVBS2, PSK_8, FEC_3_4, 0x00, 0x0e },
+ { SYS_DVBS2, PSK_8, FEC_5_6, 0x00, 0x0f },
+ { SYS_DVBS2, PSK_8, FEC_8_9, 0x00, 0x10 },
+ { SYS_DVBS2, PSK_8, FEC_9_10, 0x00, 0x11 },
+ /*
+ * `val' can be found in the FECSTATUS register when tuning.
+ * FECSTATUS will give the actual FEC in use if tuning was successful.
+ */
+};
+
+static int cx24116_lookup_fecmod(struct cx24116_state* state,
+ fe_modulation_t m, fe_code_rate_t f)
+{
+ int i, ret = -EOPNOTSUPP;
+
+ dprintk("%s(0x%02x,0x%02x)\n", __func__, m, f);
+
+ for(i=0 ; i < sizeof(CX24116_MODFEC_MODES) / sizeof(struct cx24116_modfec) ; i++)
+ {
+ if( (m == CX24116_MODFEC_MODES[i].modulation) &&
+ (f == CX24116_MODFEC_MODES[i].fec) )
+ {
+ ret = i;
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static int cx24116_set_fec(struct cx24116_state* state, fe_modulation_t mod, fe_code_rate_t fec)
+{
+ int ret = 0;
+
+ dprintk("%s(0x%02x,0x%02x)\n", __func__, mod, fec);
+
+ ret = cx24116_lookup_fecmod(state, mod, fec);
+
+ if(ret < 0)
+ return ret;
+
+ state->dnxt.fec = fec;
+ state->dnxt.fec_val = CX24116_MODFEC_MODES[ret].val;
+ state->dnxt.fec_mask = CX24116_MODFEC_MODES[ret].mask;
+ dprintk("%s() mask/val = 0x%02x/0x%02x\n", __func__,
+ state->dnxt.fec_mask, state->dnxt.fec_val);
+
+ return 0;
+}
+
+static int cx24116_set_symbolrate(struct cx24116_state* state, u32 rate)
+{
+ dprintk("%s(%d)\n", __func__, rate);
+
+ /* check if symbol rate is within limits */
+ if ((rate > state->frontend.ops.info.symbol_rate_max) ||
+ (rate < state->frontend.ops.info.symbol_rate_min)) {
+ dprintk("%s() unsupported symbol_rate = %d\n", __func__, rate);
+ return -EOPNOTSUPP;
+ }
+
+ state->dnxt.symbol_rate = rate;
+ dprintk("%s() symbol_rate = %d\n", __func__, rate);
+
+ return 0;
+}
+
+static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware *fw);
+
+static int cx24116_firmware_ondemand(struct dvb_frontend* fe)
+{
+ struct cx24116_state *state = fe->demodulator_priv;
+ const struct firmware *fw;
+ int ret = 0;
+
+ dprintk("%s()\n",__func__);
+
+ if (cx24116_readreg(state, 0x20) > 0)
+ {
+
+ if (state->skip_fw_load)
+ return 0;
+
+ /* Load firmware */
+ /* request the firmware, this will block until someone uploads it */
+ printk("%s: Waiting for firmware upload (%s)...\n", __func__, CX24116_DEFAULT_FIRMWARE);
+ ret = request_firmware(&fw, CX24116_DEFAULT_FIRMWARE, &state->i2c->dev);
+ printk("%s: Waiting for firmware upload(2)...\n", __func__);
+ if (ret) {
+ printk("%s: No firmware uploaded (timeout or file not found?)\n", __func__);
+ return ret;
+ }
+
+ /* Make sure we don't recurse back through here during loading */
+ state->skip_fw_load = 1;
+
+ ret = cx24116_load_firmware(fe, fw);
+ if (ret)
+ printk("%s: Writing firmware to device failed\n", __func__);
+
+ release_firmware(fw);
+
+ printk("%s: Firmware upload %s\n", __func__, ret == 0 ? "complete" : "failed");
+
+ /* Ensure firmware is always loaded if required */
+ state->skip_fw_load = 0;
+ }
+
+ return ret;
+}
+
+/* Take a basic firmware command structure, format it and forward it for processing */
+static int cx24116_cmd_execute(struct dvb_frontend* fe, struct cx24116_cmd *cmd)
+{
+ struct cx24116_state *state = fe->demodulator_priv;
+ int i, ret;
+
+ dprintk("%s()\n", __func__);
+
+ /* Load the firmware if required */
+ if ( (ret = cx24116_firmware_ondemand(fe)) != 0)
+ {
+ printk("%s(): Unable initialise the firmware\n", __func__);
+ return ret;
+ }
+
+ /* Write the command */
+ for(i = 0; i < cmd->len ; i++)
+ {
+ dprintk("%s: 0x%02x == 0x%02x\n", __func__, i, cmd->args[i]);
+ cx24116_writereg(state, i, cmd->args[i]);
+ }
+
+ /* Start execution and wait for cmd to terminate */
+ cx24116_writereg(state, CX24116_REG_EXECUTE, 0x01);
+ while( cx24116_readreg(state, CX24116_REG_EXECUTE) )
+ {
+ msleep(10);
+ if(i++ > 64)
+ {
+ /* Avoid looping forever if the firmware does no respond */
+ printk("%s() Firmware not responding\n", __func__);
+ return -EREMOTEIO;
+ }
+ }
+ return 0;
+}
+
+static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
+{
+ struct cx24116_state* state = fe->demodulator_priv;
+ struct cx24116_cmd cmd;
+ int i, ret;
+ unsigned char vers[4];
+
+ dprintk("%s\n", __func__);
+ dprintk("Firmware is %zu bytes (%02x %02x .. %02x %02x)\n"
+ ,fw->size
+ ,fw->data[0]
+ ,fw->data[1]
+ ,fw->data[ fw->size-2 ]
+ ,fw->data[ fw->size-1 ]
+ );
+
+ /* Toggle 88x SRST pin to reset demod */
+ if (state->config->reset_device)
+ state->config->reset_device(fe);
+
+ /* Begin the firmware load process */
+ /* Prepare the demod, load the firmware, cleanup after load */
+
+ /* Init PLL */
+ cx24116_writereg(state, 0xE5, 0x00);
+ cx24116_writereg(state, 0xF1, 0x08);
+ cx24116_writereg(state, 0xF2, 0x13);
+
+ /* Start PLL */
+ cx24116_writereg(state, 0xe0, 0x03);
+ cx24116_writereg(state, 0xe0, 0x00);
+
+ /* Unknown */
+ cx24116_writereg(state, CX24116_REG_CLKDIV, 0x46);
+ cx24116_writereg(state, CX24116_REG_RATEDIV, 0x00);
+
+ /* Unknown */
+ cx24116_writereg(state, 0xF0, 0x03);
+ cx24116_writereg(state, 0xF4, 0x81);
+ cx24116_writereg(state, 0xF5, 0x00);
+ cx24116_writereg(state, 0xF6, 0x00);
+
+ /* write the entire firmware as one transaction */
+ cx24116_writeregN(state, 0xF7, fw->data, fw->size);
+
+ cx24116_writereg(state, 0xF4, 0x10);
+ cx24116_writereg(state, 0xF0, 0x00);
+ cx24116_writereg(state, 0xF8, 0x06);
+
+ /* Firmware CMD 10: VCO config */
+ cmd.args[0x00] = CMD_SET_VCO;
+ cmd.args[0x01] = 0x05;
+ cmd.args[0x02] = 0xdc;
+ cmd.args[0x03] = 0xda;
+ cmd.args[0x04] = 0xae;
+ cmd.args[0x05] = 0xaa;
+ cmd.args[0x06] = 0x04;
+ cmd.args[0x07] = 0x9d;
+ cmd.args[0x08] = 0xfc;
+ cmd.args[0x09] = 0x06;
+ cmd.len= 0x0a;
+ ret = cx24116_cmd_execute(fe, &cmd);
+ if (ret != 0)
+ return ret;
+
+ cx24116_writereg(state, CX24116_REG_SSTATUS, 0x00);
+
+ /* Firmware CMD 14: Tuner config */
+ cmd.args[0x00] = CMD_TUNERINIT;
+ cmd.args[0x01] = 0x00;
+ cmd.args[0x02] = 0x00;
+ cmd.len= 0x03;
+ ret = cx24116_cmd_execute(fe, &cmd);
+ if (ret != 0)
+ return ret;
+
+ cx24116_writereg(state, 0xe5, 0x00);
+
+ /* Firmware CMD 13: MPEG config */
+ cmd.args[0x00] = CMD_MPEGCONFIG;
+ cmd.args[0x01] = 0x01;
+ cmd.args[0x02] = 0x75;
+ cmd.args[0x03] = 0x00;
+ if (state->config->mpg_clk_pos_pol)
+ cmd.args[0x04] = state->config->mpg_clk_pos_pol;
+ else
+ cmd.args[0x04] = 0x02;
+ cmd.args[0x05] = 0x00;
+ cmd.len= 0x06;
+ ret = cx24116_cmd_execute(fe, &cmd);
+ if (ret != 0)
+ return ret;
+
+ /* Firmware CMD 35: Get firmware version */
+ cmd.args[0x00] = CMD_UPDFWVERS;
+ cmd.len= 0x02;
+ for(i=0; i<4; i++) {
+ cmd.args[0x01] = i;
+ ret = cx24116_cmd_execute(fe, &cmd);
+ if (ret != 0)
+ return ret;
+ vers[i]= cx24116_readreg(state, CX24116_REG_MAILBOX);
+ }
+ printk("%s: FW version %i.%i.%i.%i\n", __func__,
+ vers[0], vers[1], vers[2], vers[3]);
+
+ return 0;
+}
+
+static int cx24116_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
+{
+ /* The isl6421 module will override this function in the fops. */
+ dprintk("%s() This should never appear if the isl6421 module is loaded correctly\n",__func__);
+
+ return -EOPNOTSUPP;
+}
+
+static int cx24116_read_status(struct dvb_frontend* fe, fe_status_t* status)
+{
+ struct cx24116_state *state = fe->demodulator_priv;
+
+ int lock = cx24116_readreg(state, CX24116_REG_SSTATUS);
+
+ dprintk("%s: status = 0x%02x\n", __func__, lock);
+
+ *status = 0;
+
+ if (lock & CX24116_HAS_SIGNAL)
+ *status |= FE_HAS_SIGNAL;
+ if (lock & CX24116_HAS_CARRIER)
+ *status |= FE_HAS_CARRIER;
+ if (lock & CX24116_HAS_VITERBI)
+ *status |= FE_HAS_VITERBI;
+ if (lock & CX24116_HAS_SYNCLOCK)
+ *status |= FE_HAS_SYNC | FE_HAS_LOCK;
+
+ return 0;
+}
+
+static int cx24116_read_ber(struct dvb_frontend* fe, u32* ber)
+{
+ struct cx24116_state *state = fe->demodulator_priv;
+
+ dprintk("%s()\n", __func__);
+
+ *ber = ( cx24116_readreg(state, CX24116_REG_BER24) << 24 ) |
+ ( cx24116_readreg(state, CX24116_REG_BER16) << 16 ) |
+ ( cx24116_readreg(state, CX24116_REG_BER8 ) << 8 ) |
+ cx24116_readreg(state, CX24116_REG_BER0 );
+
+ return 0;
+}
+
+/* TODO Determine function and scale appropriately */
+static int cx24116_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength)
+{
+ struct cx24116_state *state = fe->demodulator_priv;
+ struct cx24116_cmd cmd;
+ int ret;
+ u16 sig_reading;
+
+ dprintk("%s()\n", __func__);
+
+ /* Firmware CMD 19: Get AGC */
+ cmd.args[0x00] = CMD_GETAGC;
+ cmd.len= 0x01;
+ ret = cx24116_cmd_execute(fe, &cmd);
+ if (ret != 0)
+ return ret;
+
+ sig_reading = ( cx24116_readreg(state, CX24116_REG_SSTATUS) & CX24116_SIGNAL_MASK ) |
+ ( cx24116_readreg(state, CX24116_REG_SIGNAL) << 6 );
+ *signal_strength= 0 - sig_reading;
+
+ dprintk("%s: raw / cooked = 0x%04x / 0x%04x\n", __func__, sig_reading, *signal_strength);
+
+ return 0;
+}
+
+/* SNR (0..100)% = (sig & 0xf0) * 10 + (sig & 0x0f) * 10 / 16 */
+static int cx24116_read_snr_pct(struct dvb_frontend* fe, u16* snr)
+{
+ struct cx24116_state *state = fe->demodulator_priv;
+ u8 snr_reading;
+ static const u32 snr_tab[] = { /* 10 x Table (rounded up) */
+ 0x00000,0x0199A,0x03333,0x04ccD,0x06667,
+ 0x08000,0x0999A,0x0b333,0x0cccD,0x0e667,
+ 0x10000,0x1199A,0x13333,0x14ccD,0x16667,0x18000 };
+
+ dprintk("%s()\n", __func__);
+
+ snr_reading = cx24116_readreg(state, CX24116_REG_QUALITY0);
+
+ if(snr_reading >= 0xa0 /* 100% */)
+ *snr = 0xffff;
+ else
+ *snr = snr_tab [ ( snr_reading & 0xf0 ) >> 4 ] +
+ ( snr_tab [ ( snr_reading & 0x0f ) ] >> 4 );
+
+ dprintk("%s: raw / cooked = 0x%02x / 0x%04x\n", __func__,
+ snr_reading, *snr);
+
+ return 0;
+}
+
+/* The reelbox patches show the value in the registers represents
+ * ESNO, from 0->30db (values 0->300). We provide this value by
+ * default.
+ */
+static int cx24116_read_snr_esno(struct dvb_frontend* fe, u16* snr)
+{
+ struct cx24116_state *state = fe->demodulator_priv;
+
+ dprintk("%s()\n", __func__);
+
+ *snr = cx24116_readreg(state, CX24116_REG_QUALITY8) << 8 |
+ cx24116_readreg(state, CX24116_REG_QUALITY0);
+
+ dprintk("%s: raw 0x%04x\n", __func__, *snr);
+
+ return 0;
+}
+
+static int cx24116_read_snr(struct dvb_frontend* fe, u16* snr)
+{
+ if (esno_snr == 1)
+ return cx24116_read_snr_esno(fe, snr);
+ else
+ return cx24116_read_snr_pct(fe, snr);
+}
+
+static int cx24116_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
+{
+ struct cx24116_state *state = fe->demodulator_priv;
+
+ dprintk("%s()\n", __func__);
+
+ *ucblocks = ( cx24116_readreg(state, CX24116_REG_UCB8) << 8 ) |
+ cx24116_readreg(state, CX24116_REG_UCB0);
+
+ return 0;
+}
+
+/* Overwrite the current tuning params, we are about to tune */
+static void cx24116_clone_params(struct dvb_frontend* fe)
+{
+ struct cx24116_state *state = fe->demodulator_priv;
+ memcpy(&state->dcur, &state->dnxt, sizeof(state->dcur));
+}
+
+/* Wait for LNB */
+static int cx24116_wait_for_lnb(struct dvb_frontend* fe)
+{
+ struct cx24116_state *state = fe->demodulator_priv;
+ int i;
+
+ dprintk("%s() qstatus = 0x%02x\n", __func__,
+ cx24116_readreg(state, CX24116_REG_QSTATUS));
+
+ /* Wait for up to 300 ms */
+ for(i = 0; i < 30 ; i++) {
+ if (cx24116_readreg(state, CX24116_REG_QSTATUS) & 0x20)
+ return 0;
+ msleep(10);
+ }
+
+ dprintk("%s(): LNB not ready\n", __func__);
+
+ return -ETIMEDOUT; /* -EBUSY ? */
+}
+
+static int cx24116_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
+{
+ struct cx24116_cmd cmd;
+ int ret;
+
+ dprintk("%s(%d)\n", __func__, tone);
+ if ( (tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF) ) {
+ printk("%s: Invalid, tone=%d\n", __func__, tone);
+ return -EINVAL;
+ }
+
+ /* Wait for LNB ready */
+ ret = cx24116_wait_for_lnb(fe);
+ if(ret != 0)
+ return ret;
+
+ /* Min delay time after DiSEqC send */
+ msleep(15); /* XXX determine is FW does this, see send_diseqc/burst */
+
+ /* This is always done before the tone is set */
+ cmd.args[0x00] = CMD_SET_TONEPRE;
+ cmd.args[0x01] = 0x00;
+ cmd.len= 0x02;
+ ret = cx24116_cmd_execute(fe, &cmd);
+ if (ret != 0)
+ return ret;
+
+ /* Now we set the tone */
+ cmd.args[0x00] = CMD_SET_TONE;
+ cmd.args[0x01] = 0x00;
+ cmd.args[0x02] = 0x00;
+
+ switch (tone) {
+ case SEC_TONE_ON:
+ dprintk("%s: setting tone on\n", __func__);
+ cmd.args[0x03] = 0x01;
+ break;
+ case SEC_TONE_OFF:
+ dprintk("%s: setting tone off\n",__func__);
+ cmd.args[0x03] = 0x00;
+ break;
+ }
+ cmd.len= 0x04;
+
+ /* Min delay time before DiSEqC send */
+ msleep(15); /* XXX determine is FW does this, see send_diseqc/burst */
+
+ return cx24116_cmd_execute(fe, &cmd);
+}
+
+/* Initialise DiSEqC */
+static int cx24116_diseqc_init(struct dvb_frontend* fe)
+{
+ struct cx24116_state *state = fe->demodulator_priv;
+ struct cx24116_cmd cmd;
+ int ret;
+
+ /* Firmware CMD 20: LNB/DiSEqC config */
+ cmd.args[0x00] = CMD_LNBCONFIG;
+ cmd.args[0x01] = 0x00;
+ cmd.args[0x02] = 0x10;
+ cmd.args[0x03] = 0x00;
+ cmd.args[0x04] = 0x8f;
+ cmd.args[0x05] = 0x28;
+ cmd.args[0x06] = (toneburst == CX24116_DISEQC_TONEOFF) ? 0x00 : 0x01;
+ cmd.args[0x07] = 0x01;
+ cmd.len= 0x08;
+ ret = cx24116_cmd_execute(fe, &cmd);
+ if (ret != 0)
+ return ret;
+
+ /* Prepare a DiSEqC command */
+ state->dsec_cmd.args[0x00] = CMD_LNBSEND;
+
+ /* DiSEqC burst */
+ state->dsec_cmd.args[CX24116_DISEQC_BURST] = CX24116_DISEQC_MINI_A;
+
+ /* Unknown */
+ state->dsec_cmd.args[CX24116_DISEQC_ARG2_2] = 0x02;
+ state->dsec_cmd.args[CX24116_DISEQC_ARG3_0] = 0x00;
+ state->dsec_cmd.args[CX24116_DISEQC_ARG4_0] = 0x00; /* Continuation flag? */
+
+ /* DiSEqC message length */
+ state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] = 0x00;
+
+ /* Command length */
+ state->dsec_cmd.len= CX24116_DISEQC_MSGOFS;
+
+ return 0;
+}
+
+/* Send DiSEqC message with derived burst (hack) || previous burst */
+static int cx24116_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *d)
+{
+ struct cx24116_state *state = fe->demodulator_priv;
+ int i, ret;
+
+ /* Dump DiSEqC message */
+ if (debug) {
+ printk("cx24116: %s(", __func__);
+ for(i = 0 ; i < d->msg_len ;) {
+ printk("0x%02x", d->msg[i]);
+ if(++i < d->msg_len)
+ printk(", ");
+ }
+ printk(") toneburst=%d\n", toneburst);
+ }
+
+ /* Validate length */
+ if(d->msg_len > (CX24116_ARGLEN - CX24116_DISEQC_MSGOFS))
+ return -EINVAL;
+
+ /* DiSEqC message */
+ for (i = 0; i < d->msg_len; i++)
+ state->dsec_cmd.args[CX24116_DISEQC_MSGOFS + i] = d->msg[i];
+
+ /* DiSEqC message length */
+ state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] = d->msg_len;
+
+ /* Command length */
+ state->dsec_cmd.len= CX24116_DISEQC_MSGOFS + state->dsec_cmd.args[CX24116_DISEQC_MSGLEN];
+
+ /* DiSEqC toneburst */
+ if(toneburst == CX24116_DISEQC_MESGCACHE)
+ /* Message is cached */
+ return 0;
+
+ else if(toneburst == CX24116_DISEQC_TONEOFF)
+ /* Message is sent without burst */
+ state->dsec_cmd.args[CX24116_DISEQC_BURST] = 0;
+
+ else if(toneburst == CX24116_DISEQC_TONECACHE) {
+ /*
+ * Message is sent with derived else cached burst
+ *
+ * WRITE PORT GROUP COMMAND 38
+ *
+ * 0/A/A: E0 10 38 F0..F3
+ * 1/B/B: E0 10 38 F4..F7
+ * 2/C/A: E0 10 38 F8..FB
+ * 3/D/B: E0 10 38 FC..FF
+ *
+ * databyte[3]= 8421:8421
+ * ABCD:WXYZ
+ * CLR :SET
+ *
+ * WX= PORT SELECT 0..3 (X=TONEBURST)
+ * Y = VOLTAGE (0=13V, 1=18V)
+ * Z = BAND (0=LOW, 1=HIGH(22K))
+ */
+ if(d->msg_len >= 4 && d->msg[2] == 0x38)
+ state->dsec_cmd.args[CX24116_DISEQC_BURST] = ((d->msg[3] & 4) >> 2);
+ if(debug)
+ dprintk("%s burst=%d\n", __func__, state->dsec_cmd.args[CX24116_DISEQC_BURST]);
+ }
+
+ /* Wait for LNB ready */
+ ret = cx24116_wait_for_lnb(fe);
+ if(ret != 0)
+ return ret;
+
+ /* Wait for voltage/min repeat delay */
+ msleep(100);
+
+ /* Command */
+ ret = cx24116_cmd_execute(fe, &state->dsec_cmd);
+ if(ret != 0)
+ return ret;
+ /*
+ * Wait for send
+ *
+ * Eutelsat spec:
+ * >15ms delay + (XXX determine if FW does this, see set_tone)
+ * 13.5ms per byte +
+ * >15ms delay +
+ * 12.5ms burst +
+ * >15ms delay (XXX determine if FW does this, see set_tone)
+ */
+ msleep( (state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) + ((toneburst == CX24116_DISEQC_TONEOFF) ? 30 : 60) );
+
+ return 0;
+}
+
+/* Send DiSEqC burst */
+static int cx24116_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
+{
+ struct cx24116_state *state = fe->demodulator_priv;
+ int ret;
+
+ dprintk("%s(%d) toneburst=%d\n",__func__, burst, toneburst);
+
+ /* DiSEqC burst */
+ if (burst == SEC_MINI_A)
+ state->dsec_cmd.args[CX24116_DISEQC_BURST] = CX24116_DISEQC_MINI_A;
+ else if(burst == SEC_MINI_B)
+ state->dsec_cmd.args[CX24116_DISEQC_BURST] = CX24116_DISEQC_MINI_B;
+ else
+ return -EINVAL;
+
+ /* DiSEqC toneburst */
+ if(toneburst != CX24116_DISEQC_MESGCACHE)
+ /* Burst is cached */
+ return 0;
+
+ /* Burst is to be sent with cached message */
+
+ /* Wait for LNB ready */
+ ret = cx24116_wait_for_lnb(fe);
+ if(ret != 0)
+ return ret;
+
+ /* Wait for voltage/min repeat delay */
+ msleep(100);
+
+ /* Command */
+ ret = cx24116_cmd_execute(fe, &state->dsec_cmd);
+ if(ret != 0)
+ return ret;
+
+ /*
+ * Wait for send
+ *
+ * Eutelsat spec:
+ * >15ms delay + (XXX determine if FW does this, see set_tone)
+ * 13.5ms per byte +
+ * >15ms delay +
+ * 12.5ms burst +
+ * >15ms delay (XXX determine if FW does this, see set_tone)
+ */
+ msleep( (state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) + 60 );
+
+ return 0;
+}
+
+static void cx24116_release(struct dvb_frontend* fe)
+{
+ struct cx24116_state* state = fe->demodulator_priv;
+ dprintk("%s\n",__func__);
+ kfree(state);
+}
+
+static struct dvb_frontend_ops cx24116_ops;
+
+struct dvb_frontend* cx24116_attach(const struct cx24116_config* config,
+ struct i2c_adapter* i2c)
+{
+ struct cx24116_state* state = NULL;
+ int ret;
+
+ dprintk("%s\n",__func__);
+
+ /* allocate memory for the internal state */
+ state = kmalloc(sizeof(struct cx24116_state), GFP_KERNEL);
+ if (state == NULL) {
+ printk("Unable to kmalloc\n");
+ goto error1;
+ }
+
+ /* setup the state */
+ memset(state, 0, sizeof(struct cx24116_state));
+
+ state->config = config;
+ state->i2c = i2c;
+
+ /* check if the demod is present */
+ ret = (cx24116_readreg(state, 0xFF) << 8) | cx24116_readreg(state, 0xFE);
+ if (ret != 0x0501) {
+ printk("Invalid probe, probably not a CX24116 device\n");
+ goto error2;
+ }
+
+ /* create dvb_frontend */
+ memcpy(&state->frontend.ops, &cx24116_ops, sizeof(struct dvb_frontend_ops));
+ state->frontend.demodulator_priv = state;
+ return &state->frontend;
+
+error2: kfree(state);
+error1: return NULL;
+}
+/*
+ * Initialise or wake up device
+ *
+ * Power config will reset and load initial firmware if required
+ */
+static int cx24116_initfe(struct dvb_frontend* fe)
+{
+ struct cx24116_state* state = fe->demodulator_priv;
+ struct cx24116_cmd cmd;
+ int ret;
+
+ dprintk("%s()\n",__func__);
+
+ /* Power on */
+ cx24116_writereg(state, 0xe0, 0);
+ cx24116_writereg(state, 0xe1, 0);
+ cx24116_writereg(state, 0xea, 0);
+
+ /* Firmware CMD 36: Power config */
+ cmd.args[0x00] = CMD_TUNERSLEEP;
+ cmd.args[0x01] = 0;
+ cmd.len= 0x02;
+ ret = cx24116_cmd_execute(fe, &cmd);
+ if(ret != 0)
+ return ret;
+
+ return cx24116_diseqc_init(fe);
+}
+
+/*
+ * Put device to sleep
+ */
+static int cx24116_sleep(struct dvb_frontend* fe)
+{
+ struct cx24116_state* state = fe->demodulator_priv;
+ struct cx24116_cmd cmd;
+ int ret;
+
+ dprintk("%s()\n",__func__);
+
+ /* Firmware CMD 36: Power config */
+ cmd.args[0x00] = CMD_TUNERSLEEP;
+ cmd.args[0x01] = 1;
+ cmd.len= 0x02;
+ ret = cx24116_cmd_execute(fe, &cmd);
+ if(ret != 0)
+ return ret;
+
+ /* Power off (Shutdown clocks) */
+ cx24116_writereg(state, 0xea, 0xff);
+ cx24116_writereg(state, 0xe1, 1);
+ cx24116_writereg(state, 0xe0, 1);
+
+ return 0;
+}
+
+static int cx24116_set_property(struct dvb_frontend *fe, struct dtv_property* tvp)
+{
+ dprintk("%s(..)\n", __func__);
+ return 0;
+}
+
+static int cx24116_get_property(struct dvb_frontend *fe, struct dtv_property* tvp)
+{
+ dprintk("%s(..)\n", __func__);
+ return 0;
+}
+
+/* dvb-core told us to tune, the tv property cache will be complete,
+ * it's safe for is to pull values and use them for tuning purposes.
+ */
+static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
+{
+ struct cx24116_state *state = fe->demodulator_priv;
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ struct cx24116_cmd cmd;
+ fe_status_t tunerstat;
+ int i, status, ret, retune;
+
+ dprintk("%s()\n",__func__);
+
+ switch(c->delivery_system) {
+ case SYS_DVBS:
+ dprintk("%s: DVB-S delivery system selected\n",__func__);
+
+ /* Only QPSK is supported for DVB-S */
+ if(c->modulation != QPSK) {
+ dprintk("%s: unsupported modulation selected (%d)\n",
+ __func__, c->modulation);
+ return -EOPNOTSUPP;
+ }
+
+ /* Pilot doesn't exist in DVB-S, turn bit off */
+ state->dnxt.pilot_val = CX24116_PILOT_OFF;
+ retune = 1;
+
+ /* DVB-S only supports 0.35 */
+ if(c->rolloff != ROLLOFF_35) {
+ dprintk("%s: unsupported rolloff selected (%d)\n",
+ __func__, c->rolloff);
+ return -EOPNOTSUPP;
+ }
+ state->dnxt.rolloff_val = CX24116_ROLLOFF_035;
+ break;
+
+ case SYS_DVBS2:
+ dprintk("%s: DVB-S2 delivery system selected\n",__func__);
+
+ /*
+ * NBC 8PSK/QPSK with DVB-S is supported for DVB-S2,
+ * but not hardware auto detection
+ */
+ if(c->modulation != PSK_8 && c->modulation != QPSK) {
+ dprintk("%s: unsupported modulation selected (%d)\n",
+ __func__, c->modulation);
+ return -EOPNOTSUPP;
+ }
+
+ switch(c->pilot) {
+ case PILOT_AUTO: /* Not supported but emulated */
+ retune = 2; /* Fall-through */
+ case PILOT_OFF:
+ state->dnxt.pilot_val = CX24116_PILOT_OFF;
+ break;
+ case PILOT_ON:
+ state->dnxt.pilot_val = CX24116_PILOT_ON;
+ break;
+ default:
+ dprintk("%s: unsupported pilot mode selected (%d)\n",
+ __func__, c->pilot);
+ return -EOPNOTSUPP;
+ }
+
+ switch(c->rolloff) {
+ case ROLLOFF_20:
+ state->dnxt.rolloff_val= CX24116_ROLLOFF_020;
+ break;
+ case ROLLOFF_25:
+ state->dnxt.rolloff_val= CX24116_ROLLOFF_025;
+ break;
+ case ROLLOFF_35:
+ state->dnxt.rolloff_val= CX24116_ROLLOFF_035;
+ break;
+ case ROLLOFF_AUTO: /* Rolloff must be explicit */
+ default:
+ dprintk("%s: unsupported rolloff selected (%d)\n",
+ __func__, c->rolloff);
+ return -EOPNOTSUPP;
+ }
+ break;
+
+ default:
+ dprintk("%s: unsupported delivery system selected (%d)\n",
+ __func__, c->delivery_system);
+ return -EOPNOTSUPP;
+ }
+ state->dnxt.modulation = c->modulation;
+ state->dnxt.frequency = c->frequency;
+ state->dnxt.pilot = c->pilot;
+ state->dnxt.rolloff = c->rolloff;
+
+ if ((ret = cx24116_set_inversion(state, c->inversion)) != 0)
+ return ret;
+
+ /* FEC_NONE/AUTO for DVB-S2 is not supported and detected here */
+ if ((ret = cx24116_set_fec(state, c->modulation, c->fec_inner)) != 0)
+ return ret;
+
+ if ((ret = cx24116_set_symbolrate(state, c->symbol_rate)) != 0)
+ return ret;
+
+ /* discard the 'current' tuning parameters and prepare to tune */
+ cx24116_clone_params(fe);
+
+ dprintk("%s: modulation = %d\n", __func__, state->dcur.modulation);
+ dprintk("%s: frequency = %d\n", __func__, state->dcur.frequency);
+ dprintk("%s: pilot = %d (val = 0x%02x)\n", __func__,
+ state->dcur.pilot, state->dcur.pilot_val);
+ dprintk("%s: retune = %d\n", __func__, retune);
+ dprintk("%s: rolloff = %d (val = 0x%02x)\n", __func__,
+ state->dcur.rolloff, state->dcur.rolloff_val);
+ dprintk("%s: symbol_rate = %d\n", __func__, state->dcur.symbol_rate);
+ dprintk("%s: FEC = %d (mask/val = 0x%02x/0x%02x)\n", __func__,
+ state->dcur.fec, state->dcur.fec_mask, state->dcur.fec_val);
+ dprintk("%s: Inversion = %d (val = 0x%02x)\n", __func__,
+ state->dcur.inversion, state->dcur.inversion_val);
+
+ /* This is also done in advise/acquire on HVR4000 but not on LITE */
+ if (state->config->set_ts_params)
+ state->config->set_ts_params(fe, 0);
+
+ /* Set/Reset B/W */
+ cmd.args[0x00] = CMD_BANDWIDTH;
+ cmd.args[0x01] = 0x01;
+ cmd.len= 0x02;
+ ret = cx24116_cmd_execute(fe, &cmd);
+ if (ret != 0)
+ return ret;
+
+ /* Prepare a tune request */
+ cmd.args[0x00] = CMD_TUNEREQUEST;
+
+ /* Frequency */
+ cmd.args[0x01] = (state->dcur.frequency & 0xff0000) >> 16;
+ cmd.args[0x02] = (state->dcur.frequency & 0x00ff00) >> 8;
+ cmd.args[0x03] = (state->dcur.frequency & 0x0000ff);
+
+ /* Symbol Rate */
+ cmd.args[0x04] = ((state->dcur.symbol_rate / 1000) & 0xff00) >> 8;
+ cmd.args[0x05] = ((state->dcur.symbol_rate / 1000) & 0x00ff);
+
+ /* Automatic Inversion */
+ cmd.args[0x06] = state->dcur.inversion_val;
+
+ /* Modulation / FEC / Pilot */
+ cmd.args[0x07] = state->dcur.fec_val | state->dcur.pilot_val;
+
+ cmd.args[0x08] = CX24116_SEARCH_RANGE_KHZ >> 8;
+ cmd.args[0x09] = CX24116_SEARCH_RANGE_KHZ & 0xff;
+ cmd.args[0x0a] = 0x00;
+ cmd.args[0x0b] = 0x00;
+ cmd.args[0x0c] = state->dcur.rolloff_val;
+ cmd.args[0x0d] = state->dcur.fec_mask;
+
+ if (state->dcur.symbol_rate > 30000000) {
+ cmd.args[0x0e] = 0x04;
+ cmd.args[0x0f] = 0x00;
+ cmd.args[0x10] = 0x01;
+ cmd.args[0x11] = 0x77;
+ cmd.args[0x12] = 0x36;
+ cx24116_writereg(state, CX24116_REG_CLKDIV, 0x44);
+ cx24116_writereg(state, CX24116_REG_RATEDIV, 0x01);
+ } else {
+ cmd.args[0x0e] = 0x06;
+ cmd.args[0x0f] = 0x00;
+ cmd.args[0x10] = 0x00;
+ cmd.args[0x11] = 0xFA;
+ cmd.args[0x12] = 0x24;
+ cx24116_writereg(state, CX24116_REG_CLKDIV, 0x46);
+ cx24116_writereg(state, CX24116_REG_RATEDIV, 0x00);
+ }
+
+ cmd.len= 0x13;
+
+ /* We need to support pilot and non-pilot tuning in the
+ * driver automatically. This is a workaround for because
+ * the demod does not support autodetect.
+ */
+ do {
+ /* Reset status register */
+ status = cx24116_readreg(state, CX24116_REG_SSTATUS) & CX24116_SIGNAL_MASK;
+ cx24116_writereg(state, CX24116_REG_SSTATUS, status);
+
+ /* Tune */
+ ret = cx24116_cmd_execute(fe, &cmd);
+ if( ret != 0 )
+ break;
+
+ /*
+ * Wait for up to 500 ms before retrying
+ *
+ * If we are able to tune then generally it occurs within 100ms.
+ * If it takes longer, try a different toneburst setting.
+ */
+ for(i = 0; i < 50 ; i++) {
+ cx24116_read_status(fe, &tunerstat);
+ status = tunerstat & (FE_HAS_SIGNAL | FE_HAS_SYNC);
+ if(status == (FE_HAS_SIGNAL | FE_HAS_SYNC)) {
+ dprintk("%s: Tuned\n",__func__);
+ goto tuned;
+ }
+ msleep(10);
+ }
+
+ dprintk("%s: Not tuned\n",__func__);
+
+ /* Toggle pilot bit when in auto-pilot */
+ if(state->dcur.pilot == PILOT_AUTO)
+ cmd.args[0x07] ^= CX24116_PILOT_ON;
+ }
+ while(--retune);
+
+tuned: /* Set/Reset B/W */
+ cmd.args[0x00] = CMD_BANDWIDTH;
+ cmd.args[0x01] = 0x00;
+ cmd.len= 0x02;
+ ret = cx24116_cmd_execute(fe, &cmd);
+ if (ret != 0)
+ return ret;
+
+ return ret;
+}
+
+static struct dvb_frontend_ops cx24116_ops = {
+
+ .info = {
+ .name = "Conexant CX24116/CX24118",
+ .type = FE_QPSK,
+ .frequency_min = 950000,
+ .frequency_max = 2150000,
+ .frequency_stepsize = 1011, /* kHz for QPSK frontends */
+ .frequency_tolerance = 5000,
+ .symbol_rate_min = 1000000,
+ .symbol_rate_max = 45000000,
+ .caps = FE_CAN_INVERSION_AUTO |
+ FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
+ FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK | FE_CAN_RECOVER
+ },
+
+ .release = cx24116_release,
+
+ .init = cx24116_initfe,
+ .sleep = cx24116_sleep,
+ .read_status = cx24116_read_status,
+ .read_ber = cx24116_read_ber,
+ .read_signal_strength = cx24116_read_signal_strength,
+ .read_snr = cx24116_read_snr,
+ .read_ucblocks = cx24116_read_ucblocks,
+ .set_tone = cx24116_set_tone,
+ .set_voltage = cx24116_set_voltage,
+ .diseqc_send_master_cmd = cx24116_send_diseqc_msg,
+ .diseqc_send_burst = cx24116_diseqc_send_burst,
+
+ .set_property = cx24116_set_property,
+ .get_property = cx24116_get_property,
+ .set_frontend = cx24116_set_frontend,
+};
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
+
+module_param(toneburst, int, 0644);
+MODULE_PARM_DESC(toneburst, "DiSEqC toneburst 0=OFF, 1=TONE CACHE, 2=MESSAGE CACHE (default:1)");
+
+module_param(esno_snr, int, 0644);
+MODULE_PARM_DESC(debug, "SNR return units, 0=PERCENTAGE 0-100, 1=ESNO(db * 10) (default:0)");
+
+MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24116/cx24118 hardware");
+MODULE_AUTHOR("Steven Toth");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(cx24116_attach);