diff options
Diffstat (limited to 'drivers/lguest/x86')
| -rw-r--r-- | drivers/lguest/x86/core.c | 127 |
1 files changed, 65 insertions, 62 deletions
diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c index 44adb00e1490..61f2f8eb8cad 100644 --- a/drivers/lguest/x86/core.c +++ b/drivers/lguest/x86/core.c @@ -60,7 +60,7 @@ static struct lguest_pages *lguest_pages(unsigned int cpu) (SWITCHER_ADDR + SHARED_SWITCHER_PAGES*PAGE_SIZE))[cpu]); } -static DEFINE_PER_CPU(struct lguest *, last_guest); +static DEFINE_PER_CPU(struct lg_cpu *, last_cpu); /*S:010 * We approach the Switcher. @@ -73,16 +73,16 @@ static DEFINE_PER_CPU(struct lguest *, last_guest); * since it last ran. We saw this set in interrupts_and_traps.c and * segments.c. */ -static void copy_in_guest_info(struct lguest *lg, struct lguest_pages *pages) +static void copy_in_guest_info(struct lg_cpu *cpu, struct lguest_pages *pages) { /* Copying all this data can be quite expensive. We usually run the * same Guest we ran last time (and that Guest hasn't run anywhere else * meanwhile). If that's not the case, we pretend everything in the * Guest has changed. */ - if (__get_cpu_var(last_guest) != lg || lg->last_pages != pages) { - __get_cpu_var(last_guest) = lg; - lg->last_pages = pages; - lg->changed = CHANGED_ALL; + if (__get_cpu_var(last_cpu) != cpu || cpu->last_pages != pages) { + __get_cpu_var(last_cpu) = cpu; + cpu->last_pages = pages; + cpu->changed = CHANGED_ALL; } /* These copies are pretty cheap, so we do them unconditionally: */ @@ -90,42 +90,42 @@ static void copy_in_guest_info(struct lguest *lg, struct lguest_pages *pages) pages->state.host_cr3 = __pa(current->mm->pgd); /* Set up the Guest's page tables to see this CPU's pages (and no * other CPU's pages). */ - map_switcher_in_guest(lg, pages); + map_switcher_in_guest(cpu, pages); /* Set up the two "TSS" members which tell the CPU what stack to use * for traps which do directly into the Guest (ie. traps at privilege * level 1). */ - pages->state.guest_tss.sp1 = lg->esp1; - pages->state.guest_tss.ss1 = lg->ss1; + pages->state.guest_tss.esp1 = cpu->esp1; + pages->state.guest_tss.ss1 = cpu->ss1; /* Copy direct-to-Guest trap entries. */ - if (lg->changed & CHANGED_IDT) - copy_traps(lg, pages->state.guest_idt, default_idt_entries); + if (cpu->changed & CHANGED_IDT) + copy_traps(cpu, pages->state.guest_idt, default_idt_entries); /* Copy all GDT entries which the Guest can change. */ - if (lg->changed & CHANGED_GDT) - copy_gdt(lg, pages->state.guest_gdt); + if (cpu->changed & CHANGED_GDT) + copy_gdt(cpu, pages->state.guest_gdt); /* If only the TLS entries have changed, copy them. */ - else if (lg->changed & CHANGED_GDT_TLS) - copy_gdt_tls(lg, pages->state.guest_gdt); + else if (cpu->changed & CHANGED_GDT_TLS) + copy_gdt_tls(cpu, pages->state.guest_gdt); /* Mark the Guest as unchanged for next time. */ - lg->changed = 0; + cpu->changed = 0; } /* Finally: the code to actually call into the Switcher to run the Guest. */ -static void run_guest_once(struct lguest *lg, struct lguest_pages *pages) +static void run_guest_once(struct lg_cpu *cpu, struct lguest_pages *pages) { /* This is a dummy value we need for GCC's sake. */ unsigned int clobber; /* Copy the guest-specific information into this CPU's "struct * lguest_pages". */ - copy_in_guest_info(lg, pages); + copy_in_guest_info(cpu, pages); /* Set the trap number to 256 (impossible value). If we fault while * switching to the Guest (bad segment registers or bug), this will * cause us to abort the Guest. */ - lg->regs->trapnum = 256; + cpu->regs->trapnum = 256; /* Now: we push the "eflags" register on the stack, then do an "lcall". * This is how we change from using the kernel code segment to using @@ -143,7 +143,7 @@ static void run_guest_once(struct lguest *lg, struct lguest_pages *pages) * 0-th argument above, ie "a"). %ebx contains the * physical address of the Guest's top-level page * directory. */ - : "0"(pages), "1"(__pa(lg->pgdirs[lg->pgdidx].pgdir)) + : "0"(pages), "1"(__pa(cpu->lg->pgdirs[cpu->cpu_pgd].pgdir)) /* We tell gcc that all these registers could change, * which means we don't have to save and restore them in * the Switcher. */ @@ -161,12 +161,12 @@ static void run_guest_once(struct lguest *lg, struct lguest_pages *pages) /*H:040 This is the i386-specific code to setup and run the Guest. Interrupts * are disabled: we own the CPU. */ -void lguest_arch_run_guest(struct lguest *lg) +void lguest_arch_run_guest(struct lg_cpu *cpu) { /* Remember the awfully-named TS bit? If the Guest has asked to set it * we set it now, so we can trap and pass that trap to the Guest if it * uses the FPU. */ - if (lg->ts) + if (cpu->ts) lguest_set_ts(); /* SYSENTER is an optimized way of doing system calls. We can't allow @@ -180,7 +180,7 @@ void lguest_arch_run_guest(struct lguest *lg) /* Now we actually run the Guest. It will return when something * interesting happens, and we can examine its registers to see what it * was doing. */ - run_guest_once(lg, lguest_pages(raw_smp_processor_id())); + run_guest_once(cpu, lguest_pages(raw_smp_processor_id())); /* Note that the "regs" pointer contains two extra entries which are * not really registers: a trap number which says what interrupt or @@ -191,11 +191,11 @@ void lguest_arch_run_guest(struct lguest *lg) * bad virtual address. We have to grab this now, because once we * re-enable interrupts an interrupt could fault and thus overwrite * cr2, or we could even move off to a different CPU. */ - if (lg->regs->trapnum == 14) - lg->arch.last_pagefault = read_cr2(); + if (cpu->regs->trapnum == 14) + cpu->arch.last_pagefault = read_cr2(); /* Similarly, if we took a trap because the Guest used the FPU, * we have to restore the FPU it expects to see. */ - else if (lg->regs->trapnum == 7) + else if (cpu->regs->trapnum == 7) math_state_restore(); /* Restore SYSENTER if it's supposed to be on. */ @@ -214,22 +214,22 @@ void lguest_arch_run_guest(struct lguest *lg) * When the Guest uses one of these instructions, we get a trap (General * Protection Fault) and come here. We see if it's one of those troublesome * instructions and skip over it. We return true if we did. */ -static int emulate_insn(struct lguest *lg) +static int emulate_insn(struct lg_cpu *cpu) { u8 insn; unsigned int insnlen = 0, in = 0, shift = 0; /* The eip contains the *virtual* address of the Guest's instruction: * guest_pa just subtracts the Guest's page_offset. */ - unsigned long physaddr = guest_pa(lg, lg->regs->eip); + unsigned long physaddr = guest_pa(cpu, cpu->regs->eip); /* This must be the Guest kernel trying to do something, not userspace! * The bottom two bits of the CS segment register are the privilege * level. */ - if ((lg->regs->cs & 3) != GUEST_PL) + if ((cpu->regs->cs & 3) != GUEST_PL) return 0; /* Decoding x86 instructions is icky. */ - insn = lgread(lg, physaddr, u8); + insn = lgread(cpu, physaddr, u8); /* 0x66 is an "operand prefix". It means it's using the upper 16 bits of the eax register. */ @@ -237,7 +237,7 @@ static int emulate_insn(struct lguest *lg) shift = 16; /* The instruction is 1 byte so far, read the next byte. */ insnlen = 1; - insn = lgread(lg, physaddr + insnlen, u8); + insn = lgread(cpu, physaddr + insnlen, u8); } /* We can ignore the lower bit for the moment and decode the 4 opcodes @@ -268,26 +268,26 @@ static int emulate_insn(struct lguest *lg) if (in) { /* Lower bit tells is whether it's a 16 or 32 bit access */ if (insn & 0x1) - lg->regs->eax = 0xFFFFFFFF; + cpu->regs->eax = 0xFFFFFFFF; else - lg->regs->eax |= (0xFFFF << shift); + cpu->regs->eax |= (0xFFFF << shift); } /* Finally, we've "done" the instruction, so move past it. */ - lg->regs->eip += insnlen; + cpu->regs->eip += insnlen; /* Success! */ return 1; } /*H:050 Once we've re-enabled interrupts, we look at why the Guest exited. */ -void lguest_arch_handle_trap(struct lguest *lg) +void lguest_arch_handle_trap(struct lg_cpu *cpu) { - switch (lg->regs->trapnum) { + switch (cpu->regs->trapnum) { case 13: /* We've intercepted a General Protection Fault. */ /* Check if this was one of those annoying IN or OUT * instructions which we need to emulate. If so, we just go * back into the Guest after we've done it. */ - if (lg->regs->errcode == 0) { - if (emulate_insn(lg)) + if (cpu->regs->errcode == 0) { + if (emulate_insn(cpu)) return; } break; @@ -301,7 +301,8 @@ void lguest_arch_handle_trap(struct lguest *lg) * * The errcode tells whether this was a read or a write, and * whether kernel or userspace code. */ - if (demand_page(lg, lg->arch.last_pagefault, lg->regs->errcode)) + if (demand_page(cpu, cpu->arch.last_pagefault, + cpu->regs->errcode)) return; /* OK, it's really not there (or not OK): the Guest needs to @@ -311,15 +312,16 @@ void lguest_arch_handle_trap(struct lguest *lg) * Note that if the Guest were really messed up, this could * happen before it's done the LHCALL_LGUEST_INIT hypercall, so * lg->lguest_data could be NULL */ - if (lg->lguest_data && - put_user(lg->arch.last_pagefault, &lg->lguest_data->cr2)) - kill_guest(lg, "Writing cr2"); + if (cpu->lg->lguest_data && + put_user(cpu->arch.last_pagefault, + &cpu->lg->lguest_data->cr2)) + kill_guest(cpu, "Writing cr2"); break; case 7: /* We've intercepted a Device Not Available fault. */ /* If the Guest doesn't want to know, we already restored the * Floating Point Unit, so we just continue without telling * it. */ - if (!lg->ts) + if (!cpu->ts) return; break; case 32 ... 255: @@ -332,19 +334,19 @@ void lguest_arch_handle_trap(struct lguest *lg) case LGUEST_TRAP_ENTRY: /* Our 'struct hcall_args' maps directly over our regs: we set * up the pointer now to indicate a hypercall is pending. */ - lg->hcall = (struct hcall_args *)lg->regs; + cpu->hcall = (struct hcall_args *)cpu->regs; return; } /* We didn't handle the trap, so it needs to go to the Guest. */ - if (!deliver_trap(lg, lg->regs->trapnum)) + if (!deliver_trap(cpu, cpu->regs->trapnum)) /* If the Guest doesn't have a handler (either it hasn't * registered any yet, or it's one of the faults we don't let * it handle), it dies with a cryptic error message. */ - kill_guest(lg, "unhandled trap %li at %#lx (%#lx)", - lg->regs->trapnum, lg->regs->eip, - lg->regs->trapnum == 14 ? lg->arch.last_pagefault - : lg->regs->errcode); + kill_guest(cpu, "unhandled trap %li at %#lx (%#lx)", + cpu->regs->trapnum, cpu->regs->eip, + cpu->regs->trapnum == 14 ? cpu->arch.last_pagefault + : cpu->regs->errcode); } /* Now we can look at each of the routines this calls, in increasing order of @@ -487,17 +489,17 @@ void __exit lguest_arch_host_fini(void) /*H:122 The i386-specific hypercalls simply farm out to the right functions. */ -int lguest_arch_do_hcall(struct lguest *lg, struct hcall_args *args) +int lguest_arch_do_hcall(struct lg_cpu *cpu, struct hcall_args *args) { switch (args->arg0) { case LHCALL_LOAD_GDT: - load_guest_gdt(lg, args->arg1, args->arg2); + load_guest_gdt(cpu, args->arg1, args->arg2); break; case LHCALL_LOAD_IDT_ENTRY: - load_guest_idt_entry(lg, args->arg1, args->arg2, args->arg3); + load_guest_idt_entry(cpu, args->arg1, args->arg2, args->arg3); break; case LHCALL_LOAD_TLS: - guest_load_tls(lg, args->arg1); + guest_load_tls(cpu, args->arg1); break; default: /* Bad Guest. Bad! */ @@ -507,13 +509,14 @@ int lguest_arch_do_hcall(struct lguest *lg, struct hcall_args *args) } /*H:126 i386-specific hypercall initialization: */ -int lguest_arch_init_hypercalls(struct lguest *lg) +int lguest_arch_init_hypercalls(struct lg_cpu *cpu) { u32 tsc_speed; /* The pointer to the Guest's "struct lguest_data" is the only * argument. We check that address now. */ - if (!lguest_address_ok(lg, lg->hcall->arg1, sizeof(*lg->lguest_data))) + if (!lguest_address_ok(cpu->lg, cpu->hcall->arg1, + sizeof(*cpu->lg->lguest_data))) return -EFAULT; /* Having checked it, we simply set lg->lguest_data to point straight @@ -521,7 +524,7 @@ int lguest_arch_init_hypercalls(struct lguest *lg) * copy_to_user/from_user from now on, instead of lgread/write. I put * this in to show that I'm not immune to writing stupid * optimizations. */ - lg->lguest_data = lg->mem_base + lg->hcall->arg1; + cpu->lg->lguest_data = cpu->lg->mem_base + cpu->hcall->arg1; /* We insist that the Time Stamp Counter exist and doesn't change with * cpu frequency. Some devious chip manufacturers decided that TSC @@ -534,12 +537,12 @@ int lguest_arch_init_hypercalls(struct lguest *lg) tsc_speed = tsc_khz; else tsc_speed = 0; - if (put_user(tsc_speed, &lg->lguest_data->tsc_khz)) + if (put_user(tsc_speed, &cpu->lg->lguest_data->tsc_khz)) return -EFAULT; /* The interrupt code might not like the system call vector. */ - if (!check_syscall_vector(lg)) - kill_guest(lg, "bad syscall vector"); + if (!check_syscall_vector(cpu->lg)) + kill_guest(cpu, "bad syscall vector"); return 0; } @@ -548,9 +551,9 @@ int lguest_arch_init_hypercalls(struct lguest *lg) * * Most of the Guest's registers are left alone: we used get_zeroed_page() to * allocate the structure, so they will be 0. */ -void lguest_arch_setup_regs(struct lguest *lg, unsigned long start) +void lguest_arch_setup_regs(struct lg_cpu *cpu, unsigned long start) { - struct lguest_regs *regs = lg->regs; + struct lguest_regs *regs = cpu->regs; /* There are four "segment" registers which the Guest needs to boot: * The "code segment" register (cs) refers to the kernel code segment @@ -577,5 +580,5 @@ void lguest_arch_setup_regs(struct lguest *lg, unsigned long start) /* There are a couple of GDT entries the Guest expects when first * booting. */ - setup_guest_gdt(lg); + setup_guest_gdt(cpu); } |