diff options
Diffstat (limited to 'drivers/isdn/hisax/hfc_usb.h')
| -rw-r--r-- | drivers/isdn/hisax/hfc_usb.h | 130 |
1 files changed, 55 insertions, 75 deletions
diff --git a/drivers/isdn/hisax/hfc_usb.h b/drivers/isdn/hisax/hfc_usb.h index 471f2354dfde..e79f56568d30 100644 --- a/drivers/isdn/hisax/hfc_usb.h +++ b/drivers/isdn/hisax/hfc_usb.h @@ -1,8 +1,8 @@ /* -* hfc_usb.h -* -* $Id: hfc_usb.h,v 4.2 2005/04/07 15:27:17 martinb1 Exp $ -*/ + * hfc_usb.h + * + * $Id: hfc_usb.h,v 1.1.2.5 2007/08/20 14:36:03 mbachem Exp $ + */ #ifndef __HFC_USB_H__ #define __HFC_USB_H__ @@ -10,25 +10,20 @@ #define DRIVER_AUTHOR "Peter Sprenger (sprenger@moving-byters.de)" #define DRIVER_DESC "HFC-S USB based HiSAX ISDN driver" -#define VERBOSE_USB_DEBUG +#define HFC_CTRL_TIMEOUT 20 /* 5ms timeout writing/reading regs */ +#define HFC_TIMER_T3 8000 /* timeout for l1 activation timer */ +#define HFC_TIMER_T4 500 /* time for state change interval */ -/***********/ -/* defines */ -/***********/ -#define HFC_CTRL_TIMEOUT 20 /* 5ms timeout writing/reading regs */ -#define HFC_TIMER_T3 8000 /* timeout for l1 activation timer */ -#define HFC_TIMER_T4 500 /* time for state change interval */ +#define HFCUSB_L1_STATECHANGE 0 /* L1 state changed */ +#define HFCUSB_L1_DRX 1 /* D-frame received */ +#define HFCUSB_L1_ERX 2 /* E-frame received */ +#define HFCUSB_L1_DTX 4 /* D-frames completed */ -#define HFCUSB_L1_STATECHANGE 0 /* L1 state changed */ -#define HFCUSB_L1_DRX 1 /* D-frame received */ -#define HFCUSB_L1_ERX 2 /* E-frame received */ -#define HFCUSB_L1_DTX 4 /* D-frames completed */ +#define MAX_BCH_SIZE 2048 /* allowed B-channel packet size */ -#define MAX_BCH_SIZE 2048 /* allowed B-channel packet size */ - -#define HFCUSB_RX_THRESHOLD 64 /* threshold for fifo report bit rx */ -#define HFCUSB_TX_THRESHOLD 64 /* threshold for fifo report bit tx */ +#define HFCUSB_RX_THRESHOLD 64 /* threshold for fifo report bit rx */ +#define HFCUSB_TX_THRESHOLD 64 /* threshold for fifo report bit tx */ #define HFCUSB_CHIP_ID 0x16 /* Chip ID register index */ #define HFCUSB_CIRM 0x00 /* cirm register index */ @@ -52,9 +47,8 @@ #define HFCUSB_CHIPID 0x40 /* ID value of HFC-S USB */ -/******************/ + /* fifo registers */ -/******************/ #define HFCUSB_NUM_FIFOS 8 /* maximum number of fifos */ #define HFCUSB_B1_TX 0 /* index for B1 transmit bulk/int */ #define HFCUSB_B1_RX 1 /* index for B1 receive bulk/int */ @@ -66,9 +60,9 @@ #define HFCUSB_PCM_RX 7 /* -* used to switch snd_transfer_mode for different TA modes e.g. the Billion USB TA just -* supports ISO out, while the Cologne Chip EVAL TA just supports BULK out -*/ + * used to switch snd_transfer_mode for different TA modes e.g. the Billion USB TA just + * supports ISO out, while the Cologne Chip EVAL TA just supports BULK out + */ #define USB_INT 0 #define USB_BULK 1 #define USB_ISOC 2 @@ -77,49 +71,36 @@ #define ISOC_PACKETS_B 8 #define ISO_BUFFER_SIZE 128 -// ISO send definitions +/* Fifo flow Control for TX ISO */ #define SINK_MAX 68 #define SINK_MIN 48 #define SINK_DMIN 12 #define SINK_DMAX 18 #define BITLINE_INF (-64*8) - -/**********/ -/* macros */ -/**********/ +/* HFC-S USB register access by Control-URSs */ #define write_usb(a,b,c)usb_control_msg((a)->dev,(a)->ctrl_out_pipe,0,0x40,(c),(b),NULL,0,HFC_CTRL_TIMEOUT) #define read_usb(a,b,c) usb_control_msg((a)->dev,(a)->ctrl_in_pipe,1,0xC0,0,(b),(c),1,HFC_CTRL_TIMEOUT) - - -/*******************/ -/* Debugging Flags */ -/*******************/ -#define USB_DBG 1 -#define ISDN_DBG 2 - - -/* *********************/ -/* USB related defines */ -/***********************/ #define HFC_CTRL_BUFSIZE 32 - - -/*************************************************/ /* entry and size of output/input control buffer */ -/*************************************************/ typedef struct { __u8 hfc_reg; /* register number */ __u8 reg_val; /* value to be written (or read) */ int action; /* data for action handler */ } ctrl_buft; +/* Debugging Flags */ +#define HFCUSB_DBG_INIT 0x0001 +#define HFCUSB_DBG_STATES 0x0002 +#define HFCUSB_DBG_DCHANNEL 0x0080 +#define HFCUSB_DBG_FIFO_ERR 0x4000 +#define HFCUSB_DBG_VERBOSE_USB 0x8000 -/********************/ -/* URB error codes: */ -/********************/ -/* Used to represent a list of values and their respective symbolic names */ +/* + * URB error codes: + * Used to represent a list of values and their respective symbolic names + */ struct hfcusb_symbolic_list { const int num; const char *name; @@ -134,20 +115,20 @@ static struct hfcusb_symbolic_list urb_errlist[] = { {-ENXIO, "URB already queued"}, {-EFBIG, "Too much ISO frames requested"}, {-ENOSR, "Buffer error (overrun)"}, - {-EPIPE, "Specified endpoint is stalled"}, + {-EPIPE, "Specified endpoint is stalled (device not responding)"}, {-EOVERFLOW, "Babble (bad cable?)"}, {-EPROTO, "Bit-stuff error (bad cable?)"}, - {-EILSEQ, "CRC or missing token"}, - {-ETIME, "Device did not respond"}, + {-EILSEQ, "CRC/Timeout"}, + {-ETIMEDOUT, "NAK (device does not respond)"}, {-ESHUTDOWN, "Device unplugged"}, {-1, NULL} }; -/*****************************************************/ -/* device dependant information to support different */ -/* ISDN Ta's using the HFC-S USB chip */ -/*****************************************************/ +/* + * device dependant information to support different + * ISDN Ta's using the HFC-S USB chip + */ /* USB descriptor need to contain one of the following EndPoint combination: */ #define CNF_4INT3ISO 1 // 4 INT IN, 3 ISO OUT @@ -155,16 +136,19 @@ static struct hfcusb_symbolic_list urb_errlist[] = { #define CNF_4ISO3ISO 3 // 4 ISO IN, 3 ISO OUT #define CNF_3ISO3ISO 4 // 3 ISO IN, 3 ISO OUT -#define EP_NUL 1 // Endpoint at this position not allowed -#define EP_NOP 2 // all type of endpoints allowed at this position -#define EP_ISO 3 // Isochron endpoint mandatory at this position -#define EP_BLK 4 // Bulk endpoint mandatory at this position -#define EP_INT 5 // Interrupt endpoint mandatory at this position +#define EP_NUL 1 // Endpoint at this position not allowed +#define EP_NOP 2 // all type of endpoints allowed at this position +#define EP_ISO 3 // Isochron endpoint mandatory at this position +#define EP_BLK 4 // Bulk endpoint mandatory at this position +#define EP_INT 5 // Interrupt endpoint mandatory at this position -/* this array represents all endpoints possible in the HCF-USB the last -* 3 entries are the configuration number, the minimum interval for -* Interrupt endpoints & boolean if E-channel logging possible -*/ +/* + * List of all supported endpoint configuration sets, used to find the + * best matching endpoint configuration within a devices' USB descriptor. + * We need at least 3 RX endpoints, and 3 TX endpoints, either + * INT-in and ISO-out, or ISO-in and ISO-out) + * with 4 RX endpoints even E-Channel logging is possible + */ static int validconf[][19] = { // INT in, ISO out config {EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NOP, EP_INT, @@ -193,7 +177,6 @@ static char *conf_str[] = { }; #endif - typedef struct { int vendor; // vendor id int prod_id; // product id @@ -202,9 +185,9 @@ typedef struct { signed short led_bits[8]; // array of 8 possible LED bitmask settings } vendor_data; -#define LED_OFF 0 // no LED support -#define LED_SCHEME1 1 // LED standard scheme -#define LED_SCHEME2 2 // not used yet... +#define LED_OFF 0 // no LED support +#define LED_SCHEME1 1 // LED standard scheme +#define LED_SCHEME2 2 // not used yet... #define LED_POWER_ON 1 #define LED_POWER_OFF 2 @@ -217,11 +200,8 @@ typedef struct { #define LED_B2_OFF 9 #define LED_B2_DATA 10 -#define LED_NORMAL 0 // LEDs are normal -#define LED_INVERTED 1 // LEDs are inverted - -/* time in ms to perform a Flashing LED when B-Channel has traffic */ -#define LED_TIME 250 +#define LED_NORMAL 0 // LEDs are normal +#define LED_INVERTED 1 // LEDs are inverted -#endif // __HFC_USB_H__ +#endif // __HFC_USB_H__ |