summaryrefslogtreecommitdiffstats
path: root/drivers/irqchip
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/irqchip')
-rw-r--r--drivers/irqchip/irq-realtek-rtl.c134
1 files changed, 61 insertions, 73 deletions
diff --git a/drivers/irqchip/irq-realtek-rtl.c b/drivers/irqchip/irq-realtek-rtl.c
index 56bf502d9c67..2a349082af81 100644
--- a/drivers/irqchip/irq-realtek-rtl.c
+++ b/drivers/irqchip/irq-realtek-rtl.c
@@ -21,11 +21,33 @@
#define RTL_ICTL_IRR2 0x10
#define RTL_ICTL_IRR3 0x14
+#define RTL_ICTL_NUM_INPUTS 32
+
#define REG(x) (realtek_ictl_base + x)
static DEFINE_RAW_SPINLOCK(irq_lock);
static void __iomem *realtek_ictl_base;
+/*
+ * IRR0-IRR3 store 4 bits per interrupt, but Realtek uses inverted numbering,
+ * placing IRQ 31 in the first four bits. A routing value of '0' means the
+ * interrupt is left disconnected. Routing values {1..15} connect to output
+ * lines {0..14}.
+ */
+#define IRR_OFFSET(idx) (4 * (3 - (idx * 4) / 32))
+#define IRR_SHIFT(idx) ((idx * 4) % 32)
+
+static void write_irr(void __iomem *irr0, int idx, u32 value)
+{
+ unsigned int offset = IRR_OFFSET(idx);
+ unsigned int shift = IRR_SHIFT(idx);
+ u32 irr;
+
+ irr = readl(irr0 + offset) & ~(0xf << shift);
+ irr |= (value & 0xf) << shift;
+ writel(irr, irr0 + offset);
+}
+
static void realtek_ictl_unmask_irq(struct irq_data *i)
{
unsigned long flags;
@@ -62,8 +84,14 @@ static struct irq_chip realtek_ictl_irq = {
static int intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
{
+ unsigned long flags;
+
irq_set_chip_and_handler(irq, &realtek_ictl_irq, handle_level_irq);
+ raw_spin_lock_irqsave(&irq_lock, flags);
+ write_irr(REG(RTL_ICTL_IRR0), hw, 1);
+ raw_spin_unlock_irqrestore(&irq_lock, flags);
+
return 0;
}
@@ -95,90 +123,50 @@ out:
chained_irq_exit(chip, desc);
}
-/*
- * SoC interrupts are cascaded to MIPS CPU interrupts according to the
- * interrupt-map in the device tree. Each SoC interrupt gets 4 bits for
- * the CPU interrupt in an Interrupt Routing Register. Max 32 SoC interrupts
- * thus go into 4 IRRs. A routing value of '0' means the interrupt is left
- * disconnected. Routing values {1..15} connect to output lines {0..14}.
- */
-static int __init map_interrupts(struct device_node *node, struct irq_domain *domain)
-{
- struct device_node *cpu_ictl;
- const __be32 *imap;
- u32 imaplen, soc_int, cpu_int, tmp, regs[4];
- int ret, i, irr_regs[] = {
- RTL_ICTL_IRR3,
- RTL_ICTL_IRR2,
- RTL_ICTL_IRR1,
- RTL_ICTL_IRR0,
- };
- u8 mips_irqs_set;
-
- ret = of_property_read_u32(node, "#address-cells", &tmp);
- if (ret || tmp)
- return -EINVAL;
-
- imap = of_get_property(node, "interrupt-map", &imaplen);
- if (!imap || imaplen % 3)
- return -EINVAL;
-
- mips_irqs_set = 0;
- memset(regs, 0, sizeof(regs));
- for (i = 0; i < imaplen; i += 3 * sizeof(u32)) {
- soc_int = be32_to_cpup(imap);
- if (soc_int > 31)
- return -EINVAL;
-
- cpu_ictl = of_find_node_by_phandle(be32_to_cpup(imap + 1));
- if (!cpu_ictl)
- return -EINVAL;
- ret = of_property_read_u32(cpu_ictl, "#interrupt-cells", &tmp);
- of_node_put(cpu_ictl);
- if (ret || tmp != 1)
- return -EINVAL;
-
- cpu_int = be32_to_cpup(imap + 2);
- if (cpu_int > 7 || cpu_int < 2)
- return -EINVAL;
-
- if (!(mips_irqs_set & BIT(cpu_int))) {
- irq_set_chained_handler_and_data(cpu_int, realtek_irq_dispatch,
- domain);
- mips_irqs_set |= BIT(cpu_int);
- }
-
- /* Use routing values (1..6) for CPU interrupts (2..7) */
- regs[(soc_int * 4) / 32] |= (cpu_int - 1) << (soc_int * 4) % 32;
- imap += 3;
- }
-
- for (i = 0; i < 4; i++)
- writel(regs[i], REG(irr_regs[i]));
-
- return 0;
-}
-
static int __init realtek_rtl_of_init(struct device_node *node, struct device_node *parent)
{
+ struct of_phandle_args oirq;
struct irq_domain *domain;
- int ret;
+ unsigned int soc_irq;
+ int parent_irq;
realtek_ictl_base = of_iomap(node, 0);
if (!realtek_ictl_base)
return -ENXIO;
- /* Disable all cascaded interrupts */
+ /* Disable all cascaded interrupts and clear routing */
writel(0, REG(RTL_ICTL_GIMR));
+ for (soc_irq = 0; soc_irq < RTL_ICTL_NUM_INPUTS; soc_irq++)
+ write_irr(REG(RTL_ICTL_IRR0), soc_irq, 0);
+
+ if (WARN_ON(!of_irq_count(node))) {
+ /*
+ * If DT contains no parent interrupts, assume MIPS CPU IRQ 2
+ * (HW0) is connected to the first output. This is the case for
+ * all known hardware anyway. "interrupt-map" is deprecated, so
+ * don't bother trying to parse that.
+ */
+ oirq.np = of_find_compatible_node(NULL, NULL, "mti,cpu-interrupt-controller");
+ oirq.args_count = 1;
+ oirq.args[0] = 2;
+
+ parent_irq = irq_create_of_mapping(&oirq);
+
+ of_node_put(oirq.np);
+ } else {
+ parent_irq = of_irq_get(node, 0);
+ }
- domain = irq_domain_add_simple(node, 32, 0,
- &irq_domain_ops, NULL);
+ if (parent_irq < 0)
+ return parent_irq;
+ else if (!parent_irq)
+ return -ENODEV;
- ret = map_interrupts(node, domain);
- if (ret) {
- pr_err("invalid interrupt map\n");
- return ret;
- }
+ domain = irq_domain_add_linear(node, RTL_ICTL_NUM_INPUTS, &irq_domain_ops, NULL);
+ if (!domain)
+ return -ENOMEM;
+
+ irq_set_chained_handler_and_data(parent_irq, realtek_irq_dispatch, domain);
return 0;
}