summaryrefslogtreecommitdiffstats
path: root/drivers/input
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input')
-rw-r--r--drivers/input/touchscreen/atmel_mxt_ts.c130
1 files changed, 55 insertions, 75 deletions
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 799d2ac35787..5d9699fe1b55 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -23,10 +23,10 @@
#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/i2c.h>
-#include <linux/platform_data/atmel_mxt_ts.h>
#include <linux/input/mt.h>
#include <linux/interrupt.h>
#include <linux/of.h>
+#include <linux/property.h>
#include <linux/slab.h>
#include <linux/gpio/consumer.h>
#include <linux/property.h>
@@ -269,12 +269,16 @@ static const struct v4l2_file_operations mxt_video_fops = {
.poll = vb2_fop_poll,
};
+enum mxt_suspend_mode {
+ MXT_SUSPEND_DEEP_SLEEP = 0,
+ MXT_SUSPEND_T9_CTRL = 1,
+};
+
/* Each client has this additional data */
struct mxt_data {
struct i2c_client *client;
struct input_dev *input_dev;
char phys[64]; /* device physical location */
- const struct mxt_platform_data *pdata;
struct mxt_object *object_table;
struct mxt_info info;
unsigned int irq;
@@ -326,6 +330,9 @@ struct mxt_data {
/* for config update handling */
struct completion crc_completion;
+ u32 *t19_keymap;
+ unsigned int t19_num_keys;
+
enum mxt_suspend_mode suspend_mode;
};
@@ -745,15 +752,14 @@ static int mxt_write_object(struct mxt_data *data,
static void mxt_input_button(struct mxt_data *data, u8 *message)
{
struct input_dev *input = data->input_dev;
- const struct mxt_platform_data *pdata = data->pdata;
int i;
- for (i = 0; i < pdata->t19_num_keys; i++) {
- if (pdata->t19_keymap[i] == KEY_RESERVED)
+ for (i = 0; i < data->t19_num_keys; i++) {
+ if (data->t19_keymap[i] == KEY_RESERVED)
continue;
/* Active-low switch */
- input_report_key(input, pdata->t19_keymap[i],
+ input_report_key(input, data->t19_keymap[i],
!(message[1] & BIT(i)));
}
}
@@ -761,7 +767,7 @@ static void mxt_input_button(struct mxt_data *data, u8 *message)
static void mxt_input_sync(struct mxt_data *data)
{
input_mt_report_pointer_emulation(data->input_dev,
- data->pdata->t19_num_keys);
+ data->t19_num_keys);
input_sync(data->input_dev);
}
@@ -1861,7 +1867,6 @@ static void mxt_input_close(struct input_dev *dev);
static void mxt_set_up_as_touchpad(struct input_dev *input_dev,
struct mxt_data *data)
{
- const struct mxt_platform_data *pdata = data->pdata;
int i;
input_dev->name = "Atmel maXTouch Touchpad";
@@ -1875,15 +1880,14 @@ static void mxt_set_up_as_touchpad(struct input_dev *input_dev,
input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
MXT_PIXELS_PER_MM);
- for (i = 0; i < pdata->t19_num_keys; i++)
- if (pdata->t19_keymap[i] != KEY_RESERVED)
+ for (i = 0; i < data->t19_num_keys; i++)
+ if (data->t19_keymap[i] != KEY_RESERVED)
input_set_capability(input_dev, EV_KEY,
- pdata->t19_keymap[i]);
+ data->t19_keymap[i]);
}
static int mxt_initialize_input_device(struct mxt_data *data)
{
- const struct mxt_platform_data *pdata = data->pdata;
struct device *dev = &data->client->dev;
struct input_dev *input_dev;
int error;
@@ -1949,7 +1953,7 @@ static int mxt_initialize_input_device(struct mxt_data *data)
}
/* If device has buttons we assume it is a touchpad */
- if (pdata->t19_num_keys) {
+ if (data->t19_num_keys) {
mxt_set_up_as_touchpad(input_dev, data);
mt_flags |= INPUT_MT_POINTER;
} else {
@@ -2923,51 +2927,42 @@ static void mxt_input_close(struct input_dev *dev)
mxt_stop(data);
}
-static const struct mxt_platform_data *
-mxt_parse_device_properties(struct i2c_client *client)
+static int mxt_parse_device_properties(struct mxt_data *data)
{
static const char keymap_property[] = "linux,gpio-keymap";
- struct mxt_platform_data *pdata;
+ struct device *dev = &data->client->dev;
u32 *keymap;
int n_keys;
int error;
- pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- return ERR_PTR(-ENOMEM);
-
- if (device_property_present(&client->dev, keymap_property)) {
- n_keys = device_property_read_u32_array(&client->dev,
- keymap_property,
+ if (device_property_present(dev, keymap_property)) {
+ n_keys = device_property_read_u32_array(dev, keymap_property,
NULL, 0);
if (n_keys <= 0) {
error = n_keys < 0 ? n_keys : -EINVAL;
- dev_err(&client->dev,
- "invalid/malformed '%s' property: %d\n",
+ dev_err(dev, "invalid/malformed '%s' property: %d\n",
keymap_property, error);
- return ERR_PTR(error);
+ return error;
}
- keymap = devm_kmalloc_array(&client->dev, n_keys, sizeof(u32),
+ keymap = devm_kmalloc_array(dev, n_keys, sizeof(*keymap),
GFP_KERNEL);
if (!keymap)
- return ERR_PTR(-ENOMEM);
+ return -ENOMEM;
- error = device_property_read_u32_array(&client->dev,
- keymap_property,
+ error = device_property_read_u32_array(dev, keymap_property,
keymap, n_keys);
if (error) {
- dev_err(&client->dev,
- "failed to parse '%s' property: %d\n",
+ dev_err(dev, "failed to parse '%s' property: %d\n",
keymap_property, error);
- return ERR_PTR(error);
+ return error;
}
- pdata->t19_keymap = keymap;
- pdata->t19_num_keys = n_keys;
+ data->t19_keymap = keymap;
+ data->t19_num_keys = n_keys;
}
- return pdata;
+ return 0;
}
#ifdef CONFIG_ACPI
@@ -3050,25 +3045,12 @@ static const struct dmi_system_id mxt_dmi_table[] = {
{ }
};
-static int mxt_acpi_probe(struct i2c_client *client)
+static int mxt_prepare_acpi_properties(struct i2c_client *client)
{
struct acpi_device *adev;
const struct dmi_system_id *system_id;
const struct mxt_acpi_platform_data *acpi_pdata;
- /*
- * Ignore ACPI devices representing bootloader mode.
- *
- * This is a bit of a hack: Google Chromebook BIOS creates ACPI
- * devices for both application and bootloader modes, but we are
- * interested in application mode only (if device is in bootloader
- * mode we'll end up switching into application anyway). So far
- * application mode addresses were all above 0x40, so we'll use it
- * as a threshold.
- */
- if (client->addr < 0x40)
- return -ENXIO;
-
adev = ACPI_COMPANION(&client->dev);
if (!adev)
return -ENOENT;
@@ -3104,24 +3086,12 @@ static int mxt_acpi_probe(struct i2c_client *client)
return 0;
}
#else
-static int mxt_acpi_probe(struct i2c_client *client)
+static int mxt_prepare_acpi_properties(struct i2c_client *client)
{
return -ENOENT;
}
#endif
-static const struct mxt_platform_data *
-mxt_get_platform_data(struct i2c_client *client)
-{
- const struct mxt_platform_data *pdata;
-
- pdata = dev_get_platdata(&client->dev);
- if (pdata)
- return pdata;
-
- return mxt_parse_device_properties(client);
-}
-
static const struct dmi_system_id chromebook_T9_suspend_dmi[] = {
{
.matches = {
@@ -3140,16 +3110,20 @@ static const struct dmi_system_id chromebook_T9_suspend_dmi[] = {
static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct mxt_data *data;
- const struct mxt_platform_data *pdata;
int error;
- error = mxt_acpi_probe(client);
- if (error && error != -ENOENT)
- return error;
-
- pdata = mxt_get_platform_data(client);
- if (IS_ERR(pdata))
- return PTR_ERR(pdata);
+ /*
+ * Ignore ACPI devices representing bootloader mode.
+ *
+ * This is a bit of a hack: Google Chromebook BIOS creates ACPI
+ * devices for both application and bootloader modes, but we are
+ * interested in application mode only (if device is in bootloader
+ * mode we'll end up switching into application anyway). So far
+ * application mode addresses were all above 0x40, so we'll use it
+ * as a threshold.
+ */
+ if (ACPI_COMPANION(&client->dev) && client->addr < 0x40)
+ return -ENXIO;
data = devm_kzalloc(&client->dev, sizeof(struct mxt_data), GFP_KERNEL);
if (!data)
@@ -3159,7 +3133,6 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
client->adapter->nr, client->addr);
data->client = client;
- data->pdata = pdata;
data->irq = client->irq;
i2c_set_clientdata(client, data);
@@ -3170,6 +3143,14 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
data->suspend_mode = dmi_check_system(chromebook_T9_suspend_dmi) ?
MXT_SUSPEND_T9_CTRL : MXT_SUSPEND_DEEP_SLEEP;
+ error = mxt_prepare_acpi_properties(client);
+ if (error && error != -ENOENT)
+ return error;
+
+ error = mxt_parse_device_properties(data);
+ if (error)
+ return error;
+
data->reset_gpio = devm_gpiod_get_optional(&client->dev,
"reset", GPIOD_OUT_LOW);
if (IS_ERR(data->reset_gpio)) {
@@ -3179,8 +3160,7 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
}
error = devm_request_threaded_irq(&client->dev, client->irq,
- NULL, mxt_interrupt,
- pdata->irqflags | IRQF_ONESHOT,
+ NULL, mxt_interrupt, IRQF_ONESHOT,
client->name, data);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
@@ -3300,7 +3280,7 @@ MODULE_DEVICE_TABLE(i2c, mxt_id);
static struct i2c_driver mxt_driver = {
.driver = {
.name = "atmel_mxt_ts",
- .of_match_table = of_match_ptr(mxt_of_match),
+ .of_match_table = mxt_of_match,
.acpi_match_table = ACPI_PTR(mxt_acpi_id),
.pm = &mxt_pm_ops,
},
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 11:41:48 +0000