diff options
Diffstat (limited to 'drivers/input/touchscreen/stmpe-ts.c')
| -rw-r--r-- | drivers/input/touchscreen/stmpe-ts.c | 42 |
1 files changed, 7 insertions, 35 deletions
diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c index c5d9006588a2..cf9c9aa39f6e 100644 --- a/drivers/input/touchscreen/stmpe-ts.c +++ b/drivers/input/touchscreen/stmpe-ts.c @@ -30,8 +30,6 @@ * with touchscreen controller */ #define STMPE_REG_INT_STA 0x0B -#define STMPE_REG_ADC_CTRL1 0x20 -#define STMPE_REG_ADC_CTRL2 0x21 #define STMPE_REG_TSC_CTRL 0x40 #define STMPE_REG_TSC_CFG 0x41 #define STMPE_REG_FIFO_TH 0x4A @@ -58,15 +56,6 @@ * @idev: registered input device * @work: a work item used to scan the device * @dev: a pointer back to the MFD cell struct device* - * @sample_time: ADC converstion time in number of clock. - * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, - * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks), - * recommended is 4. - * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC) - * @ref_sel: ADC reference source - * (0 -> internal reference, 1 -> external reference) - * @adc_freq: ADC Clock speed - * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz) * @ave_ctrl: Sample average control * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples) * @touch_det_delay: Touch detect interrupt delay @@ -88,10 +77,6 @@ struct stmpe_touch { struct input_dev *idev; struct delayed_work work; struct device *dev; - u8 sample_time; - u8 mod_12b; - u8 ref_sel; - u8 adc_freq; u8 ave_ctrl; u8 touch_det_delay; u8 settling; @@ -192,7 +177,7 @@ static irqreturn_t stmpe_ts_handler(int irq, void *data) static int stmpe_init_hw(struct stmpe_touch *ts) { int ret; - u8 adc_ctrl1, adc_ctrl1_mask, tsc_cfg, tsc_cfg_mask; + u8 tsc_cfg, tsc_cfg_mask; struct stmpe *stmpe = ts->stmpe; struct device *dev = ts->dev; @@ -202,22 +187,9 @@ static int stmpe_init_hw(struct stmpe_touch *ts) return ret; } - adc_ctrl1 = STMPE_SAMPLE_TIME(ts->sample_time) | - STMPE_MOD_12B(ts->mod_12b) | STMPE_REF_SEL(ts->ref_sel); - adc_ctrl1_mask = STMPE_SAMPLE_TIME(0xff) | STMPE_MOD_12B(0xff) | - STMPE_REF_SEL(0xff); - - ret = stmpe_set_bits(stmpe, STMPE_REG_ADC_CTRL1, - adc_ctrl1_mask, adc_ctrl1); - if (ret) { - dev_err(dev, "Could not setup ADC\n"); - return ret; - } - - ret = stmpe_set_bits(stmpe, STMPE_REG_ADC_CTRL2, - STMPE_ADC_FREQ(0xff), STMPE_ADC_FREQ(ts->adc_freq)); + ret = stmpe811_adc_common_init(stmpe); if (ret) { - dev_err(dev, "Could not setup ADC\n"); + stmpe_disable(stmpe, STMPE_BLOCK_TOUCHSCREEN | STMPE_BLOCK_ADC); return ret; } @@ -295,13 +267,13 @@ static void stmpe_ts_get_platform_info(struct platform_device *pdev, if (np) { if (!of_property_read_u32(np, "st,sample-time", &val)) - ts->sample_time = val; + ts->stmpe->sample_time = val; if (!of_property_read_u32(np, "st,mod-12b", &val)) - ts->mod_12b = val; + ts->stmpe->mod_12b = val; if (!of_property_read_u32(np, "st,ref-sel", &val)) - ts->ref_sel = val; + ts->stmpe->ref_sel = val; if (!of_property_read_u32(np, "st,adc-freq", &val)) - ts->adc_freq = val; + ts->stmpe->adc_freq = val; if (!of_property_read_u32(np, "st,ave-ctrl", &val)) ts->ave_ctrl = val; if (!of_property_read_u32(np, "st,touch-det-delay", &val)) |