summaryrefslogtreecommitdiffstats
path: root/drivers/input/misc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input/misc')
-rw-r--r--drivers/input/misc/keyspan_remote.c2
-rw-r--r--drivers/input/misc/pm8941-pwrkey.c70
-rw-r--r--drivers/input/misc/powermate.c2
-rw-r--r--drivers/input/misc/xen-kbdfront.c183
-rw-r--r--drivers/input/misc/yealink.c4
5 files changed, 170 insertions, 91 deletions
diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c
index 67482b248b2d..a8937ceac66a 100644
--- a/drivers/input/misc/keyspan_remote.c
+++ b/drivers/input/misc/keyspan_remote.c
@@ -466,7 +466,7 @@ static int keyspan_probe(struct usb_interface *interface, const struct usb_devic
remote->in_endpoint = endpoint;
remote->toggle = -1; /* Set to -1 so we will always not match the toggle from the first remote message. */
- remote->in_buffer = usb_alloc_coherent(udev, RECV_SIZE, GFP_ATOMIC, &remote->in_dma);
+ remote->in_buffer = usb_alloc_coherent(udev, RECV_SIZE, GFP_KERNEL, &remote->in_dma);
if (!remote->in_buffer) {
error = -ENOMEM;
goto fail1;
diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
index 18ad956454f1..48153e0ca19a 100644
--- a/drivers/input/misc/pm8941-pwrkey.c
+++ b/drivers/input/misc/pm8941-pwrkey.c
@@ -20,6 +20,7 @@
#include <linux/log2.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/regmap.h>
@@ -28,6 +29,7 @@
#define PON_RT_STS 0x10
#define PON_KPDPWR_N_SET BIT(0)
+#define PON_RESIN_N_SET BIT(1)
#define PON_PS_HOLD_RST_CTL 0x5a
#define PON_PS_HOLD_RST_CTL2 0x5b
@@ -38,10 +40,15 @@
#define PON_PULL_CTL 0x70
#define PON_KPDPWR_PULL_UP BIT(1)
+#define PON_RESIN_PULL_UP BIT(0)
#define PON_DBC_CTL 0x71
#define PON_DBC_DELAY_MASK 0x7
+struct pm8941_data {
+ unsigned int pull_up_bit;
+ unsigned int status_bit;
+};
struct pm8941_pwrkey {
struct device *dev;
@@ -52,6 +59,9 @@ struct pm8941_pwrkey {
unsigned int revision;
struct notifier_block reboot_notifier;
+
+ u32 code;
+ const struct pm8941_data *data;
};
static int pm8941_reboot_notify(struct notifier_block *nb,
@@ -124,7 +134,8 @@ static irqreturn_t pm8941_pwrkey_irq(int irq, void *_data)
if (error)
return IRQ_HANDLED;
- input_report_key(pwrkey->input, KEY_POWER, !!(sts & PON_KPDPWR_N_SET));
+ input_report_key(pwrkey->input, pwrkey->code,
+ sts & pwrkey->data->status_bit);
input_sync(pwrkey->input);
return IRQ_HANDLED;
@@ -157,6 +168,7 @@ static int pm8941_pwrkey_probe(struct platform_device *pdev)
{
struct pm8941_pwrkey *pwrkey;
bool pull_up;
+ struct device *parent;
u32 req_delay;
int error;
@@ -175,12 +187,30 @@ static int pm8941_pwrkey_probe(struct platform_device *pdev)
return -ENOMEM;
pwrkey->dev = &pdev->dev;
+ pwrkey->data = of_device_get_match_data(&pdev->dev);
- pwrkey->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ parent = pdev->dev.parent;
+ pwrkey->regmap = dev_get_regmap(parent, NULL);
if (!pwrkey->regmap) {
- dev_err(&pdev->dev, "failed to locate regmap\n");
- return -ENODEV;
+ /*
+ * We failed to get regmap for parent. Let's see if we are
+ * a child of pon node and read regmap and reg from its
+ * parent.
+ */
+ pwrkey->regmap = dev_get_regmap(parent->parent, NULL);
+ if (!pwrkey->regmap) {
+ dev_err(&pdev->dev, "failed to locate regmap\n");
+ return -ENODEV;
+ }
+
+ error = of_property_read_u32(parent->of_node,
+ "reg", &pwrkey->baseaddr);
+ } else {
+ error = of_property_read_u32(pdev->dev.of_node, "reg",
+ &pwrkey->baseaddr);
}
+ if (error)
+ return error;
pwrkey->irq = platform_get_irq(pdev, 0);
if (pwrkey->irq < 0) {
@@ -188,11 +218,6 @@ static int pm8941_pwrkey_probe(struct platform_device *pdev)
return pwrkey->irq;
}
- error = of_property_read_u32(pdev->dev.of_node, "reg",
- &pwrkey->baseaddr);
- if (error)
- return error;
-
error = regmap_read(pwrkey->regmap, pwrkey->baseaddr + PON_REV2,
&pwrkey->revision);
if (error) {
@@ -200,13 +225,21 @@ static int pm8941_pwrkey_probe(struct platform_device *pdev)
return error;
}
+ error = of_property_read_u32(pdev->dev.of_node, "linux,code",
+ &pwrkey->code);
+ if (error) {
+ dev_dbg(&pdev->dev,
+ "no linux,code assuming power (%d)\n", error);
+ pwrkey->code = KEY_POWER;
+ }
+
pwrkey->input = devm_input_allocate_device(&pdev->dev);
if (!pwrkey->input) {
dev_dbg(&pdev->dev, "unable to allocate input device\n");
return -ENOMEM;
}
- input_set_capability(pwrkey->input, EV_KEY, KEY_POWER);
+ input_set_capability(pwrkey->input, EV_KEY, pwrkey->code);
pwrkey->input->name = "pm8941_pwrkey";
pwrkey->input->phys = "pm8941_pwrkey/input0";
@@ -225,8 +258,8 @@ static int pm8941_pwrkey_probe(struct platform_device *pdev)
error = regmap_update_bits(pwrkey->regmap,
pwrkey->baseaddr + PON_PULL_CTL,
- PON_KPDPWR_PULL_UP,
- pull_up ? PON_KPDPWR_PULL_UP : 0);
+ pwrkey->data->pull_up_bit,
+ pull_up ? pwrkey->data->pull_up_bit : 0);
if (error) {
dev_err(&pdev->dev, "failed to set pull: %d\n", error);
return error;
@@ -271,8 +304,19 @@ static int pm8941_pwrkey_remove(struct platform_device *pdev)
return 0;
}
+static const struct pm8941_data pwrkey_data = {
+ .pull_up_bit = PON_KPDPWR_PULL_UP,
+ .status_bit = PON_KPDPWR_N_SET,
+};
+
+static const struct pm8941_data resin_data = {
+ .pull_up_bit = PON_RESIN_PULL_UP,
+ .status_bit = PON_RESIN_N_SET,
+};
+
static const struct of_device_id pm8941_pwr_key_id_table[] = {
- { .compatible = "qcom,pm8941-pwrkey" },
+ { .compatible = "qcom,pm8941-pwrkey", .data = &pwrkey_data },
+ { .compatible = "qcom,pm8941-resin", .data = &resin_data },
{ }
};
MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table);
diff --git a/drivers/input/misc/powermate.c b/drivers/input/misc/powermate.c
index 5c8c79623c87..e8de3aaf9f63 100644
--- a/drivers/input/misc/powermate.c
+++ b/drivers/input/misc/powermate.c
@@ -277,7 +277,7 @@ static int powermate_input_event(struct input_dev *dev, unsigned int type, unsig
static int powermate_alloc_buffers(struct usb_device *udev, struct powermate_device *pm)
{
pm->data = usb_alloc_coherent(udev, POWERMATE_PAYLOAD_SIZE_MAX,
- GFP_ATOMIC, &pm->data_dma);
+ GFP_KERNEL, &pm->data_dma);
if (!pm->data)
return -1;
diff --git a/drivers/input/misc/xen-kbdfront.c b/drivers/input/misc/xen-kbdfront.c
index d91f3b1c5375..594f72e39639 100644
--- a/drivers/input/misc/xen-kbdfront.c
+++ b/drivers/input/misc/xen-kbdfront.c
@@ -63,6 +63,9 @@ static void xenkbd_disconnect_backend(struct xenkbd_info *);
static void xenkbd_handle_motion_event(struct xenkbd_info *info,
struct xenkbd_motion *motion)
{
+ if (unlikely(!info->ptr))
+ return;
+
input_report_rel(info->ptr, REL_X, motion->rel_x);
input_report_rel(info->ptr, REL_Y, motion->rel_y);
if (motion->rel_z)
@@ -73,6 +76,9 @@ static void xenkbd_handle_motion_event(struct xenkbd_info *info,
static void xenkbd_handle_position_event(struct xenkbd_info *info,
struct xenkbd_position *pos)
{
+ if (unlikely(!info->ptr))
+ return;
+
input_report_abs(info->ptr, ABS_X, pos->abs_x);
input_report_abs(info->ptr, ABS_Y, pos->abs_y);
if (pos->rel_z)
@@ -97,6 +103,9 @@ static void xenkbd_handle_key_event(struct xenkbd_info *info,
return;
}
+ if (unlikely(!dev))
+ return;
+
input_event(dev, EV_KEY, key->keycode, value);
input_sync(dev);
}
@@ -192,7 +201,7 @@ static int xenkbd_probe(struct xenbus_device *dev,
const struct xenbus_device_id *id)
{
int ret, i;
- unsigned int abs, touch;
+ bool with_mtouch, with_kbd, with_ptr;
struct xenkbd_info *info;
struct input_dev *kbd, *ptr, *mtouch;
@@ -211,106 +220,127 @@ static int xenkbd_probe(struct xenbus_device *dev,
if (!info->page)
goto error_nomem;
- /* Set input abs params to match backend screen res */
- abs = xenbus_read_unsigned(dev->otherend,
- XENKBD_FIELD_FEAT_ABS_POINTER, 0);
- ptr_size[KPARAM_X] = xenbus_read_unsigned(dev->otherend,
- XENKBD_FIELD_WIDTH,
- ptr_size[KPARAM_X]);
- ptr_size[KPARAM_Y] = xenbus_read_unsigned(dev->otherend,
- XENKBD_FIELD_HEIGHT,
- ptr_size[KPARAM_Y]);
- if (abs) {
- ret = xenbus_write(XBT_NIL, dev->nodename,
- XENKBD_FIELD_REQ_ABS_POINTER, "1");
- if (ret) {
- pr_warn("xenkbd: can't request abs-pointer\n");
- abs = 0;
- }
- }
+ /*
+ * The below are reverse logic, e.g. if the feature is set, then
+ * do not expose the corresponding virtual device.
+ */
+ with_kbd = !xenbus_read_unsigned(dev->otherend,
+ XENKBD_FIELD_FEAT_DSBL_KEYBRD, 0);
+
+ with_ptr = !xenbus_read_unsigned(dev->otherend,
+ XENKBD_FIELD_FEAT_DSBL_POINTER, 0);
- touch = xenbus_read_unsigned(dev->nodename,
- XENKBD_FIELD_FEAT_MTOUCH, 0);
- if (touch) {
+ /* Direct logic: if set, then create multi-touch device. */
+ with_mtouch = xenbus_read_unsigned(dev->otherend,
+ XENKBD_FIELD_FEAT_MTOUCH, 0);
+ if (with_mtouch) {
ret = xenbus_write(XBT_NIL, dev->nodename,
XENKBD_FIELD_REQ_MTOUCH, "1");
if (ret) {
pr_warn("xenkbd: can't request multi-touch");
- touch = 0;
+ with_mtouch = 0;
}
}
/* keyboard */
- kbd = input_allocate_device();
- if (!kbd)
- goto error_nomem;
- kbd->name = "Xen Virtual Keyboard";
- kbd->phys = info->phys;
- kbd->id.bustype = BUS_PCI;
- kbd->id.vendor = 0x5853;
- kbd->id.product = 0xffff;
-
- __set_bit(EV_KEY, kbd->evbit);
- for (i = KEY_ESC; i < KEY_UNKNOWN; i++)
- __set_bit(i, kbd->keybit);
- for (i = KEY_OK; i < KEY_MAX; i++)
- __set_bit(i, kbd->keybit);
-
- ret = input_register_device(kbd);
- if (ret) {
- input_free_device(kbd);
- xenbus_dev_fatal(dev, ret, "input_register_device(kbd)");
- goto error;
+ if (with_kbd) {
+ kbd = input_allocate_device();
+ if (!kbd)
+ goto error_nomem;
+ kbd->name = "Xen Virtual Keyboard";
+ kbd->phys = info->phys;
+ kbd->id.bustype = BUS_PCI;
+ kbd->id.vendor = 0x5853;
+ kbd->id.product = 0xffff;
+
+ __set_bit(EV_KEY, kbd->evbit);
+ for (i = KEY_ESC; i < KEY_UNKNOWN; i++)
+ __set_bit(i, kbd->keybit);
+ for (i = KEY_OK; i < KEY_MAX; i++)
+ __set_bit(i, kbd->keybit);
+
+ ret = input_register_device(kbd);
+ if (ret) {
+ input_free_device(kbd);
+ xenbus_dev_fatal(dev, ret,
+ "input_register_device(kbd)");
+ goto error;
+ }
+ info->kbd = kbd;
}
- info->kbd = kbd;
/* pointing device */
- ptr = input_allocate_device();
- if (!ptr)
- goto error_nomem;
- ptr->name = "Xen Virtual Pointer";
- ptr->phys = info->phys;
- ptr->id.bustype = BUS_PCI;
- ptr->id.vendor = 0x5853;
- ptr->id.product = 0xfffe;
-
- if (abs) {
- __set_bit(EV_ABS, ptr->evbit);
- input_set_abs_params(ptr, ABS_X, 0, ptr_size[KPARAM_X], 0, 0);
- input_set_abs_params(ptr, ABS_Y, 0, ptr_size[KPARAM_Y], 0, 0);
- } else {
- input_set_capability(ptr, EV_REL, REL_X);
- input_set_capability(ptr, EV_REL, REL_Y);
- }
- input_set_capability(ptr, EV_REL, REL_WHEEL);
+ if (with_ptr) {
+ unsigned int abs;
+
+ /* Set input abs params to match backend screen res */
+ abs = xenbus_read_unsigned(dev->otherend,
+ XENKBD_FIELD_FEAT_ABS_POINTER, 0);
+ ptr_size[KPARAM_X] = xenbus_read_unsigned(dev->otherend,
+ XENKBD_FIELD_WIDTH,
+ ptr_size[KPARAM_X]);
+ ptr_size[KPARAM_Y] = xenbus_read_unsigned(dev->otherend,
+ XENKBD_FIELD_HEIGHT,
+ ptr_size[KPARAM_Y]);
+ if (abs) {
+ ret = xenbus_write(XBT_NIL, dev->nodename,
+ XENKBD_FIELD_REQ_ABS_POINTER, "1");
+ if (ret) {
+ pr_warn("xenkbd: can't request abs-pointer\n");
+ abs = 0;
+ }
+ }
- __set_bit(EV_KEY, ptr->evbit);
- for (i = BTN_LEFT; i <= BTN_TASK; i++)
- __set_bit(i, ptr->keybit);
+ ptr = input_allocate_device();
+ if (!ptr)
+ goto error_nomem;
+ ptr->name = "Xen Virtual Pointer";
+ ptr->phys = info->phys;
+ ptr->id.bustype = BUS_PCI;
+ ptr->id.vendor = 0x5853;
+ ptr->id.product = 0xfffe;
+
+ if (abs) {
+ __set_bit(EV_ABS, ptr->evbit);
+ input_set_abs_params(ptr, ABS_X, 0,
+ ptr_size[KPARAM_X], 0, 0);
+ input_set_abs_params(ptr, ABS_Y, 0,
+ ptr_size[KPARAM_Y], 0, 0);
+ } else {
+ input_set_capability(ptr, EV_REL, REL_X);
+ input_set_capability(ptr, EV_REL, REL_Y);
+ }
+ input_set_capability(ptr, EV_REL, REL_WHEEL);
- ret = input_register_device(ptr);
- if (ret) {
- input_free_device(ptr);
- xenbus_dev_fatal(dev, ret, "input_register_device(ptr)");
- goto error;
+ __set_bit(EV_KEY, ptr->evbit);
+ for (i = BTN_LEFT; i <= BTN_TASK; i++)
+ __set_bit(i, ptr->keybit);
+
+ ret = input_register_device(ptr);
+ if (ret) {
+ input_free_device(ptr);
+ xenbus_dev_fatal(dev, ret,
+ "input_register_device(ptr)");
+ goto error;
+ }
+ info->ptr = ptr;
}
- info->ptr = ptr;
/* multi-touch device */
- if (touch) {
+ if (with_mtouch) {
int num_cont, width, height;
mtouch = input_allocate_device();
if (!mtouch)
goto error_nomem;
- num_cont = xenbus_read_unsigned(info->xbdev->nodename,
+ num_cont = xenbus_read_unsigned(info->xbdev->otherend,
XENKBD_FIELD_MT_NUM_CONTACTS,
1);
- width = xenbus_read_unsigned(info->xbdev->nodename,
+ width = xenbus_read_unsigned(info->xbdev->otherend,
XENKBD_FIELD_MT_WIDTH,
XENFB_WIDTH);
- height = xenbus_read_unsigned(info->xbdev->nodename,
+ height = xenbus_read_unsigned(info->xbdev->otherend,
XENKBD_FIELD_MT_HEIGHT,
XENFB_HEIGHT);
@@ -346,6 +376,11 @@ static int xenkbd_probe(struct xenbus_device *dev,
info->mtouch = mtouch;
}
+ if (!(with_kbd || with_ptr || with_mtouch)) {
+ ret = -ENXIO;
+ goto error;
+ }
+
ret = xenkbd_connect_backend(dev, info);
if (ret < 0)
goto error;
diff --git a/drivers/input/misc/yealink.c b/drivers/input/misc/yealink.c
index f0c9bf87b4e3..1365cd94ed9b 100644
--- a/drivers/input/misc/yealink.c
+++ b/drivers/input/misc/yealink.c
@@ -894,12 +894,12 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
/* allocate usb buffers */
yld->irq_data = usb_alloc_coherent(udev, USB_PKT_LEN,
- GFP_ATOMIC, &yld->irq_dma);
+ GFP_KERNEL, &yld->irq_dma);
if (yld->irq_data == NULL)
return usb_cleanup(yld, -ENOMEM);
yld->ctl_data = usb_alloc_coherent(udev, USB_PKT_LEN,
- GFP_ATOMIC, &yld->ctl_dma);
+ GFP_KERNEL, &yld->ctl_dma);
if (!yld->ctl_data)
return usb_cleanup(yld, -ENOMEM);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 16:38:51 +0000