summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/hfi1/init.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/infiniband/hw/hfi1/init.c')
-rw-r--r--drivers/infiniband/hw/hfi1/init.c1818
1 files changed, 1818 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/hfi1/init.c b/drivers/infiniband/hw/hfi1/init.c
new file mode 100644
index 000000000000..5cc492e5776d
--- /dev/null
+++ b/drivers/infiniband/hw/hfi1/init.c
@@ -0,0 +1,1818 @@
+/*
+ * Copyright(c) 2015, 2016 Intel Corporation.
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * BSD LICENSE
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <linux/idr.h>
+#include <linux/module.h>
+#include <linux/printk.h>
+#include <linux/hrtimer.h>
+#include <rdma/rdma_vt.h>
+
+#include "hfi.h"
+#include "device.h"
+#include "common.h"
+#include "trace.h"
+#include "mad.h"
+#include "sdma.h"
+#include "debugfs.h"
+#include "verbs.h"
+#include "aspm.h"
+
+#undef pr_fmt
+#define pr_fmt(fmt) DRIVER_NAME ": " fmt
+
+/*
+ * min buffers we want to have per context, after driver
+ */
+#define HFI1_MIN_USER_CTXT_BUFCNT 7
+
+#define HFI1_MIN_HDRQ_EGRBUF_CNT 2
+#define HFI1_MAX_HDRQ_EGRBUF_CNT 16352
+#define HFI1_MIN_EAGER_BUFFER_SIZE (4 * 1024) /* 4KB */
+#define HFI1_MAX_EAGER_BUFFER_SIZE (256 * 1024) /* 256KB */
+
+/*
+ * Number of user receive contexts we are configured to use (to allow for more
+ * pio buffers per ctxt, etc.) Zero means use one user context per CPU.
+ */
+int num_user_contexts = -1;
+module_param_named(num_user_contexts, num_user_contexts, uint, S_IRUGO);
+MODULE_PARM_DESC(
+ num_user_contexts, "Set max number of user contexts to use");
+
+uint krcvqs[RXE_NUM_DATA_VL];
+int krcvqsset;
+module_param_array(krcvqs, uint, &krcvqsset, S_IRUGO);
+MODULE_PARM_DESC(krcvqs, "Array of the number of non-control kernel receive queues by VL");
+
+/* computed based on above array */
+unsigned n_krcvqs;
+
+static unsigned hfi1_rcvarr_split = 25;
+module_param_named(rcvarr_split, hfi1_rcvarr_split, uint, S_IRUGO);
+MODULE_PARM_DESC(rcvarr_split, "Percent of context's RcvArray entries used for Eager buffers");
+
+static uint eager_buffer_size = (2 << 20); /* 2MB */
+module_param(eager_buffer_size, uint, S_IRUGO);
+MODULE_PARM_DESC(eager_buffer_size, "Size of the eager buffers, default: 2MB");
+
+static uint rcvhdrcnt = 2048; /* 2x the max eager buffer count */
+module_param_named(rcvhdrcnt, rcvhdrcnt, uint, S_IRUGO);
+MODULE_PARM_DESC(rcvhdrcnt, "Receive header queue count (default 2048)");
+
+static uint hfi1_hdrq_entsize = 32;
+module_param_named(hdrq_entsize, hfi1_hdrq_entsize, uint, S_IRUGO);
+MODULE_PARM_DESC(hdrq_entsize, "Size of header queue entries: 2 - 8B, 16 - 64B (default), 32 - 128B");
+
+unsigned int user_credit_return_threshold = 33; /* default is 33% */
+module_param(user_credit_return_threshold, uint, S_IRUGO);
+MODULE_PARM_DESC(user_credit_return_threshold, "Credit return threshold for user send contexts, return when unreturned credits passes this many blocks (in percent of allocated blocks, 0 is off)");
+
+static inline u64 encode_rcv_header_entry_size(u16);
+
+static struct idr hfi1_unit_table;
+u32 hfi1_cpulist_count;
+unsigned long *hfi1_cpulist;
+
+/*
+ * Common code for creating the receive context array.
+ */
+int hfi1_create_ctxts(struct hfi1_devdata *dd)
+{
+ unsigned i;
+ int ret;
+
+ /* Control context has to be always 0 */
+ BUILD_BUG_ON(HFI1_CTRL_CTXT != 0);
+
+ dd->rcd = kzalloc_node(dd->num_rcv_contexts * sizeof(*dd->rcd),
+ GFP_KERNEL, dd->node);
+ if (!dd->rcd)
+ goto nomem;
+
+ /* create one or more kernel contexts */
+ for (i = 0; i < dd->first_user_ctxt; ++i) {
+ struct hfi1_pportdata *ppd;
+ struct hfi1_ctxtdata *rcd;
+
+ ppd = dd->pport + (i % dd->num_pports);
+ rcd = hfi1_create_ctxtdata(ppd, i, dd->node);
+ if (!rcd) {
+ dd_dev_err(dd,
+ "Unable to allocate kernel receive context, failing\n");
+ goto nomem;
+ }
+ /*
+ * Set up the kernel context flags here and now because they
+ * use default values for all receive side memories. User
+ * contexts will be handled as they are created.
+ */
+ rcd->flags = HFI1_CAP_KGET(MULTI_PKT_EGR) |
+ HFI1_CAP_KGET(NODROP_RHQ_FULL) |
+ HFI1_CAP_KGET(NODROP_EGR_FULL) |
+ HFI1_CAP_KGET(DMA_RTAIL);
+
+ /* Control context must use DMA_RTAIL */
+ if (rcd->ctxt == HFI1_CTRL_CTXT)
+ rcd->flags |= HFI1_CAP_DMA_RTAIL;
+ rcd->seq_cnt = 1;
+
+ rcd->sc = sc_alloc(dd, SC_ACK, rcd->rcvhdrqentsize, dd->node);
+ if (!rcd->sc) {
+ dd_dev_err(dd,
+ "Unable to allocate kernel send context, failing\n");
+ dd->rcd[rcd->ctxt] = NULL;
+ hfi1_free_ctxtdata(dd, rcd);
+ goto nomem;
+ }
+
+ ret = hfi1_init_ctxt(rcd->sc);
+ if (ret < 0) {
+ dd_dev_err(dd,
+ "Failed to setup kernel receive context, failing\n");
+ sc_free(rcd->sc);
+ dd->rcd[rcd->ctxt] = NULL;
+ hfi1_free_ctxtdata(dd, rcd);
+ ret = -EFAULT;
+ goto bail;
+ }
+ }
+
+ /*
+ * Initialize aspm, to be done after gen3 transition and setting up
+ * contexts and before enabling interrupts
+ */
+ aspm_init(dd);
+
+ return 0;
+nomem:
+ ret = -ENOMEM;
+bail:
+ kfree(dd->rcd);
+ dd->rcd = NULL;
+ return ret;
+}
+
+/*
+ * Common code for user and kernel context setup.
+ */
+struct hfi1_ctxtdata *hfi1_create_ctxtdata(struct hfi1_pportdata *ppd, u32 ctxt,
+ int numa)
+{
+ struct hfi1_devdata *dd = ppd->dd;
+ struct hfi1_ctxtdata *rcd;
+ unsigned kctxt_ngroups = 0;
+ u32 base;
+
+ if (dd->rcv_entries.nctxt_extra >
+ dd->num_rcv_contexts - dd->first_user_ctxt)
+ kctxt_ngroups = (dd->rcv_entries.nctxt_extra -
+ (dd->num_rcv_contexts - dd->first_user_ctxt));
+ rcd = kzalloc(sizeof(*rcd), GFP_KERNEL);
+ if (rcd) {
+ u32 rcvtids, max_entries;
+
+ hfi1_cdbg(PROC, "setting up context %u\n", ctxt);
+
+ INIT_LIST_HEAD(&rcd->qp_wait_list);
+ rcd->ppd = ppd;
+ rcd->dd = dd;
+ rcd->cnt = 1;
+ rcd->ctxt = ctxt;
+ dd->rcd[ctxt] = rcd;
+ rcd->numa_id = numa;
+ rcd->rcv_array_groups = dd->rcv_entries.ngroups;
+
+ mutex_init(&rcd->exp_lock);
+
+ /*
+ * Calculate the context's RcvArray entry starting point.
+ * We do this here because we have to take into account all
+ * the RcvArray entries that previous context would have
+ * taken and we have to account for any extra groups
+ * assigned to the kernel or user contexts.
+ */
+ if (ctxt < dd->first_user_ctxt) {
+ if (ctxt < kctxt_ngroups) {
+ base = ctxt * (dd->rcv_entries.ngroups + 1);
+ rcd->rcv_array_groups++;
+ } else
+ base = kctxt_ngroups +
+ (ctxt * dd->rcv_entries.ngroups);
+ } else {
+ u16 ct = ctxt - dd->first_user_ctxt;
+
+ base = ((dd->n_krcv_queues * dd->rcv_entries.ngroups) +
+ kctxt_ngroups);
+ if (ct < dd->rcv_entries.nctxt_extra) {
+ base += ct * (dd->rcv_entries.ngroups + 1);
+ rcd->rcv_array_groups++;
+ } else
+ base += dd->rcv_entries.nctxt_extra +
+ (ct * dd->rcv_entries.ngroups);
+ }
+ rcd->eager_base = base * dd->rcv_entries.group_size;
+
+ /* Validate and initialize Rcv Hdr Q variables */
+ if (rcvhdrcnt % HDRQ_INCREMENT) {
+ dd_dev_err(dd,
+ "ctxt%u: header queue count %d must be divisible by %lu\n",
+ rcd->ctxt, rcvhdrcnt, HDRQ_INCREMENT);
+ goto bail;
+ }
+ rcd->rcvhdrq_cnt = rcvhdrcnt;
+ rcd->rcvhdrqentsize = hfi1_hdrq_entsize;
+ /*
+ * Simple Eager buffer allocation: we have already pre-allocated
+ * the number of RcvArray entry groups. Each ctxtdata structure
+ * holds the number of groups for that context.
+ *
+ * To follow CSR requirements and maintain cacheline alignment,
+ * make sure all sizes and bases are multiples of group_size.
+ *
+ * The expected entry count is what is left after assigning
+ * eager.
+ */
+ max_entries = rcd->rcv_array_groups *
+ dd->rcv_entries.group_size;
+ rcvtids = ((max_entries * hfi1_rcvarr_split) / 100);
+ rcd->egrbufs.count = round_down(rcvtids,
+ dd->rcv_entries.group_size);
+ if (rcd->egrbufs.count > MAX_EAGER_ENTRIES) {
+ dd_dev_err(dd, "ctxt%u: requested too many RcvArray entries.\n",
+ rcd->ctxt);
+ rcd->egrbufs.count = MAX_EAGER_ENTRIES;
+ }
+ hfi1_cdbg(PROC,
+ "ctxt%u: max Eager buffer RcvArray entries: %u\n",
+ rcd->ctxt, rcd->egrbufs.count);
+
+ /*
+ * Allocate array that will hold the eager buffer accounting
+ * data.
+ * This will allocate the maximum possible buffer count based
+ * on the value of the RcvArray split parameter.
+ * The resulting value will be rounded down to the closest
+ * multiple of dd->rcv_entries.group_size.
+ */
+ rcd->egrbufs.buffers = kcalloc(rcd->egrbufs.count,
+ sizeof(*rcd->egrbufs.buffers),
+ GFP_KERNEL);
+ if (!rcd->egrbufs.buffers)
+ goto bail;
+ rcd->egrbufs.rcvtids = kcalloc(rcd->egrbufs.count,
+ sizeof(*rcd->egrbufs.rcvtids),
+ GFP_KERNEL);
+ if (!rcd->egrbufs.rcvtids)
+ goto bail;
+ rcd->egrbufs.size = eager_buffer_size;
+ /*
+ * The size of the buffers programmed into the RcvArray
+ * entries needs to be big enough to handle the highest
+ * MTU supported.
+ */
+ if (rcd->egrbufs.size < hfi1_max_mtu) {
+ rcd->egrbufs.size = __roundup_pow_of_two(hfi1_max_mtu);
+ hfi1_cdbg(PROC,
+ "ctxt%u: eager bufs size too small. Adjusting to %zu\n",
+ rcd->ctxt, rcd->egrbufs.size);
+ }
+ rcd->egrbufs.rcvtid_size = HFI1_MAX_EAGER_BUFFER_SIZE;
+
+ if (ctxt < dd->first_user_ctxt) { /* N/A for PSM contexts */
+ rcd->opstats = kzalloc(sizeof(*rcd->opstats),
+ GFP_KERNEL);
+ if (!rcd->opstats)
+ goto bail;
+ }
+ }
+ return rcd;
+bail:
+ kfree(rcd->egrbufs.rcvtids);
+ kfree(rcd->egrbufs.buffers);
+ kfree(rcd);
+ return NULL;
+}
+
+/*
+ * Convert a receive header entry size that to the encoding used in the CSR.
+ *
+ * Return a zero if the given size is invalid.
+ */
+static inline u64 encode_rcv_header_entry_size(u16 size)
+{
+ /* there are only 3 valid receive header entry sizes */
+ if (size == 2)
+ return 1;
+ if (size == 16)
+ return 2;
+ else if (size == 32)
+ return 4;
+ return 0; /* invalid */
+}
+
+/*
+ * Select the largest ccti value over all SLs to determine the intra-
+ * packet gap for the link.
+ *
+ * called with cca_timer_lock held (to protect access to cca_timer
+ * array), and rcu_read_lock() (to protect access to cc_state).
+ */
+void set_link_ipg(struct hfi1_pportdata *ppd)
+{
+ struct hfi1_devdata *dd = ppd->dd;
+ struct cc_state *cc_state;
+ int i;
+ u16 cce, ccti_limit, max_ccti = 0;
+ u16 shift, mult;
+ u64 src;
+ u32 current_egress_rate; /* Mbits /sec */
+ u32 max_pkt_time;
+ /*
+ * max_pkt_time is the maximum packet egress time in units
+ * of the fabric clock period 1/(805 MHz).
+ */
+
+ cc_state = get_cc_state(ppd);
+
+ if (!cc_state)
+ /*
+ * This should _never_ happen - rcu_read_lock() is held,
+ * and set_link_ipg() should not be called if cc_state
+ * is NULL.
+ */
+ return;
+
+ for (i = 0; i < OPA_MAX_SLS; i++) {
+ u16 ccti = ppd->cca_timer[i].ccti;
+
+ if (ccti > max_ccti)
+ max_ccti = ccti;
+ }
+
+ ccti_limit = cc_state->cct.ccti_limit;
+ if (max_ccti > ccti_limit)
+ max_ccti = ccti_limit;
+
+ cce = cc_state->cct.entries[max_ccti].entry;
+ shift = (cce & 0xc000) >> 14;
+ mult = (cce & 0x3fff);
+
+ current_egress_rate = active_egress_rate(ppd);
+
+ max_pkt_time = egress_cycles(ppd->ibmaxlen, current_egress_rate);
+
+ src = (max_pkt_time >> shift) * mult;
+
+ src &= SEND_STATIC_RATE_CONTROL_CSR_SRC_RELOAD_SMASK;
+ src <<= SEND_STATIC_RATE_CONTROL_CSR_SRC_RELOAD_SHIFT;
+
+ write_csr(dd, SEND_STATIC_RATE_CONTROL, src);
+}
+
+static enum hrtimer_restart cca_timer_fn(struct hrtimer *t)
+{
+ struct cca_timer *cca_timer;
+ struct hfi1_pportdata *ppd;
+ int sl;
+ u16 ccti_timer, ccti_min;
+ struct cc_state *cc_state;
+ unsigned long flags;
+ enum hrtimer_restart ret = HRTIMER_NORESTART;
+
+ cca_timer = container_of(t, struct cca_timer, hrtimer);
+ ppd = cca_timer->ppd;
+ sl = cca_timer->sl;
+
+ rcu_read_lock();
+
+ cc_state = get_cc_state(ppd);
+
+ if (!cc_state) {
+ rcu_read_unlock();
+ return HRTIMER_NORESTART;
+ }
+
+ /*
+ * 1) decrement ccti for SL
+ * 2) calculate IPG for link (set_link_ipg())
+ * 3) restart timer, unless ccti is at min value
+ */
+
+ ccti_min = cc_state->cong_setting.entries[sl].ccti_min;
+ ccti_timer = cc_state->cong_setting.entries[sl].ccti_timer;
+
+ spin_lock_irqsave(&ppd->cca_timer_lock, flags);
+
+ if (cca_timer->ccti > ccti_min) {
+ cca_timer->ccti--;
+ set_link_ipg(ppd);
+ }
+
+ if (cca_timer->ccti > ccti_min) {
+ unsigned long nsec = 1024 * ccti_timer;
+ /* ccti_timer is in units of 1.024 usec */
+ hrtimer_forward_now(t, ns_to_ktime(nsec));
+ ret = HRTIMER_RESTART;
+ }
+
+ spin_unlock_irqrestore(&ppd->cca_timer_lock, flags);
+ rcu_read_unlock();
+ return ret;
+}
+
+/*
+ * Common code for initializing the physical port structure.
+ */
+void hfi1_init_pportdata(struct pci_dev *pdev, struct hfi1_pportdata *ppd,
+ struct hfi1_devdata *dd, u8 hw_pidx, u8 port)
+{
+ int i, size;
+ uint default_pkey_idx;
+
+ ppd->dd = dd;
+ ppd->hw_pidx = hw_pidx;
+ ppd->port = port; /* IB port number, not index */
+
+ default_pkey_idx = 1;
+
+ ppd->pkeys[default_pkey_idx] = DEFAULT_P_KEY;
+ if (loopback) {
+ hfi1_early_err(&pdev->dev,
+ "Faking data partition 0x8001 in idx %u\n",
+ !default_pkey_idx);
+ ppd->pkeys[!default_pkey_idx] = 0x8001;
+ }
+
+ INIT_WORK(&ppd->link_vc_work, handle_verify_cap);
+ INIT_WORK(&ppd->link_up_work, handle_link_up);
+ INIT_WORK(&ppd->link_down_work, handle_link_down);
+ INIT_WORK(&ppd->freeze_work, handle_freeze);
+ INIT_WORK(&ppd->link_downgrade_work, handle_link_downgrade);
+ INIT_WORK(&ppd->sma_message_work, handle_sma_message);
+ INIT_WORK(&ppd->link_bounce_work, handle_link_bounce);
+ INIT_WORK(&ppd->linkstate_active_work, receive_interrupt_work);
+ INIT_WORK(&ppd->qsfp_info.qsfp_work, qsfp_event);
+
+ mutex_init(&ppd->hls_lock);
+ spin_lock_init(&ppd->sdma_alllock);
+ spin_lock_init(&ppd->qsfp_info.qsfp_lock);
+
+ ppd->qsfp_info.ppd = ppd;
+ ppd->sm_trap_qp = 0x0;
+ ppd->sa_qp = 0x1;
+
+ ppd->hfi1_wq = NULL;
+
+ spin_lock_init(&ppd->cca_timer_lock);
+
+ for (i = 0; i < OPA_MAX_SLS; i++) {
+ hrtimer_init(&ppd->cca_timer[i].hrtimer, CLOCK_MONOTONIC,
+ HRTIMER_MODE_REL);
+ ppd->cca_timer[i].ppd = ppd;
+ ppd->cca_timer[i].sl = i;
+ ppd->cca_timer[i].ccti = 0;
+ ppd->cca_timer[i].hrtimer.function = cca_timer_fn;
+ }
+
+ ppd->cc_max_table_entries = IB_CC_TABLE_CAP_DEFAULT;
+
+ spin_lock_init(&ppd->cc_state_lock);
+ spin_lock_init(&ppd->cc_log_lock);
+ size = sizeof(struct cc_state);
+ RCU_INIT_POINTER(ppd->cc_state, kzalloc(size, GFP_KERNEL));
+ if (!rcu_dereference(ppd->cc_state))
+ goto bail;
+ return;
+
+bail:
+
+ hfi1_early_err(&pdev->dev,
+ "Congestion Control Agent disabled for port %d\n", port);
+}
+
+/*
+ * Do initialization for device that is only needed on
+ * first detect, not on resets.
+ */
+static int loadtime_init(struct hfi1_devdata *dd)
+{
+ return 0;
+}
+
+/**
+ * init_after_reset - re-initialize after a reset
+ * @dd: the hfi1_ib device
+ *
+ * sanity check at least some of the values after reset, and
+ * ensure no receive or transmit (explicitly, in case reset
+ * failed
+ */
+static int init_after_reset(struct hfi1_devdata *dd)
+{
+ int i;
+
+ /*
+ * Ensure chip does no sends or receives, tail updates, or
+ * pioavail updates while we re-initialize. This is mostly
+ * for the driver data structures, not chip registers.
+ */
+ for (i = 0; i < dd->num_rcv_contexts; i++)
+ hfi1_rcvctrl(dd, HFI1_RCVCTRL_CTXT_DIS |
+ HFI1_RCVCTRL_INTRAVAIL_DIS |
+ HFI1_RCVCTRL_TAILUPD_DIS, i);
+ pio_send_control(dd, PSC_GLOBAL_DISABLE);
+ for (i = 0; i < dd->num_send_contexts; i++)
+ sc_disable(dd->send_contexts[i].sc);
+
+ return 0;
+}
+
+static void enable_chip(struct hfi1_devdata *dd)
+{
+ u32 rcvmask;
+ u32 i;
+
+ /* enable PIO send */
+ pio_send_control(dd, PSC_GLOBAL_ENABLE);
+
+ /*
+ * Enable kernel ctxts' receive and receive interrupt.
+ * Other ctxts done as user opens and initializes them.
+ */
+ for (i = 0; i < dd->first_user_ctxt; ++i) {
+ rcvmask = HFI1_RCVCTRL_CTXT_ENB | HFI1_RCVCTRL_INTRAVAIL_ENB;
+ rcvmask |= HFI1_CAP_KGET_MASK(dd->rcd[i]->flags, DMA_RTAIL) ?
+ HFI1_RCVCTRL_TAILUPD_ENB : HFI1_RCVCTRL_TAILUPD_DIS;
+ if (!HFI1_CAP_KGET_MASK(dd->rcd[i]->flags, MULTI_PKT_EGR))
+ rcvmask |= HFI1_RCVCTRL_ONE_PKT_EGR_ENB;
+ if (HFI1_CAP_KGET_MASK(dd->rcd[i]->flags, NODROP_RHQ_FULL))
+ rcvmask |= HFI1_RCVCTRL_NO_RHQ_DROP_ENB;
+ if (HFI1_CAP_KGET_MASK(dd->rcd[i]->flags, NODROP_EGR_FULL))
+ rcvmask |= HFI1_RCVCTRL_NO_EGR_DROP_ENB;
+ hfi1_rcvctrl(dd, rcvmask, i);
+ sc_enable(dd->rcd[i]->sc);
+ }
+}
+
+/**
+ * create_workqueues - create per port workqueues
+ * @dd: the hfi1_ib device
+ */
+static int create_workqueues(struct hfi1_devdata *dd)
+{
+ int pidx;
+ struct hfi1_pportdata *ppd;
+
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ ppd = dd->pport + pidx;
+ if (!ppd->hfi1_wq) {
+ ppd->hfi1_wq =
+ alloc_workqueue(
+ "hfi%d_%d",
+ WQ_SYSFS | WQ_HIGHPRI | WQ_CPU_INTENSIVE,
+ dd->num_sdma,
+ dd->unit, pidx);
+ if (!ppd->hfi1_wq)
+ goto wq_error;
+ }
+ }
+ return 0;
+wq_error:
+ pr_err("alloc_workqueue failed for port %d\n", pidx + 1);
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ ppd = dd->pport + pidx;
+ if (ppd->hfi1_wq) {
+ destroy_workqueue(ppd->hfi1_wq);
+ ppd->hfi1_wq = NULL;
+ }
+ }
+ return -ENOMEM;
+}
+
+/**
+ * hfi1_init - do the actual initialization sequence on the chip
+ * @dd: the hfi1_ib device
+ * @reinit: re-initializing, so don't allocate new memory
+ *
+ * Do the actual initialization sequence on the chip. This is done
+ * both from the init routine called from the PCI infrastructure, and
+ * when we reset the chip, or detect that it was reset internally,
+ * or it's administratively re-enabled.
+ *
+ * Memory allocation here and in called routines is only done in
+ * the first case (reinit == 0). We have to be careful, because even
+ * without memory allocation, we need to re-write all the chip registers
+ * TIDs, etc. after the reset or enable has completed.
+ */
+int hfi1_init(struct hfi1_devdata *dd, int reinit)
+{
+ int ret = 0, pidx, lastfail = 0;
+ unsigned i, len;
+ struct hfi1_ctxtdata *rcd;
+ struct hfi1_pportdata *ppd;
+
+ /* Set up recv low level handlers */
+ dd->normal_rhf_rcv_functions[RHF_RCV_TYPE_EXPECTED] =
+ kdeth_process_expected;
+ dd->normal_rhf_rcv_functions[RHF_RCV_TYPE_EAGER] =
+ kdeth_process_eager;
+ dd->normal_rhf_rcv_functions[RHF_RCV_TYPE_IB] = process_receive_ib;
+ dd->normal_rhf_rcv_functions[RHF_RCV_TYPE_ERROR] =
+ process_receive_error;
+ dd->normal_rhf_rcv_functions[RHF_RCV_TYPE_BYPASS] =
+ process_receive_bypass;
+ dd->normal_rhf_rcv_functions[RHF_RCV_TYPE_INVALID5] =
+ process_receive_invalid;
+ dd->normal_rhf_rcv_functions[RHF_RCV_TYPE_INVALID6] =
+ process_receive_invalid;
+ dd->normal_rhf_rcv_functions[RHF_RCV_TYPE_INVALID7] =
+ process_receive_invalid;
+ dd->rhf_rcv_function_map = dd->normal_rhf_rcv_functions;
+
+ /* Set up send low level handlers */
+ dd->process_pio_send = hfi1_verbs_send_pio;
+ dd->process_dma_send = hfi1_verbs_send_dma;
+ dd->pio_inline_send = pio_copy;
+
+ if (is_ax(dd)) {
+ atomic_set(&dd->drop_packet, DROP_PACKET_ON);
+ dd->do_drop = 1;
+ } else {
+ atomic_set(&dd->drop_packet, DROP_PACKET_OFF);
+ dd->do_drop = 0;
+ }
+
+ /* make sure the link is not "up" */
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ ppd = dd->pport + pidx;
+ ppd->linkup = 0;
+ }
+
+ if (reinit)
+ ret = init_after_reset(dd);
+ else
+ ret = loadtime_init(dd);
+ if (ret)
+ goto done;
+
+ /* allocate dummy tail memory for all receive contexts */
+ dd->rcvhdrtail_dummy_kvaddr = dma_zalloc_coherent(
+ &dd->pcidev->dev, sizeof(u64),
+ &dd->rcvhdrtail_dummy_physaddr,
+ GFP_KERNEL);
+
+ if (!dd->rcvhdrtail_dummy_kvaddr) {
+ dd_dev_err(dd, "cannot allocate dummy tail memory\n");
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ /* dd->rcd can be NULL if early initialization failed */
+ for (i = 0; dd->rcd && i < dd->first_user_ctxt; ++i) {
+ /*
+ * Set up the (kernel) rcvhdr queue and egr TIDs. If doing
+ * re-init, the simplest way to handle this is to free
+ * existing, and re-allocate.
+ * Need to re-create rest of ctxt 0 ctxtdata as well.
+ */
+ rcd = dd->rcd[i];
+ if (!rcd)
+ continue;
+
+ rcd->do_interrupt = &handle_receive_interrupt;
+
+ lastfail = hfi1_create_rcvhdrq(dd, rcd);
+ if (!lastfail)
+ lastfail = hfi1_setup_eagerbufs(rcd);
+ if (lastfail) {
+ dd_dev_err(dd,
+ "failed to allocate kernel ctxt's rcvhdrq and/or egr bufs\n");
+ ret = lastfail;
+ }
+ }
+
+ /* Allocate enough memory for user event notification. */
+ len = PAGE_ALIGN(dd->chip_rcv_contexts * HFI1_MAX_SHARED_CTXTS *
+ sizeof(*dd->events));
+ dd->events = vmalloc_user(len);
+ if (!dd->events)
+ dd_dev_err(dd, "Failed to allocate user events page\n");
+ /*
+ * Allocate a page for device and port status.
+ * Page will be shared amongst all user processes.
+ */
+ dd->status = vmalloc_user(PAGE_SIZE);
+ if (!dd->status)
+ dd_dev_err(dd, "Failed to allocate dev status page\n");
+ else
+ dd->freezelen = PAGE_SIZE - (sizeof(*dd->status) -
+ sizeof(dd->status->freezemsg));
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ ppd = dd->pport + pidx;
+ if (dd->status)
+ /* Currently, we only have one port */
+ ppd->statusp = &dd->status->port;
+
+ set_mtu(ppd);
+ }
+
+ /* enable chip even if we have an error, so we can debug cause */
+ enable_chip(dd);
+
+done:
+ /*
+ * Set status even if port serdes is not initialized
+ * so that diags will work.
+ */
+ if (dd->status)
+ dd->status->dev |= HFI1_STATUS_CHIP_PRESENT |
+ HFI1_STATUS_INITTED;
+ if (!ret) {
+ /* enable all interrupts from the chip */
+ set_intr_state(dd, 1);
+
+ /* chip is OK for user apps; mark it as initialized */
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ ppd = dd->pport + pidx;
+
+ /*
+ * start the serdes - must be after interrupts are
+ * enabled so we are notified when the link goes up
+ */
+ lastfail = bringup_serdes(ppd);
+ if (lastfail)
+ dd_dev_info(dd,
+ "Failed to bring up port %u\n",
+ ppd->port);
+
+ /*
+ * Set status even if port serdes is not initialized
+ * so that diags will work.
+ */
+ if (ppd->statusp)
+ *ppd->statusp |= HFI1_STATUS_CHIP_PRESENT |
+ HFI1_STATUS_INITTED;
+ if (!ppd->link_speed_enabled)
+ continue;
+ }
+ }
+
+ /* if ret is non-zero, we probably should do some cleanup here... */
+ return ret;
+}
+
+static inline struct hfi1_devdata *__hfi1_lookup(int unit)
+{
+ return idr_find(&hfi1_unit_table, unit);
+}
+
+struct hfi1_devdata *hfi1_lookup(int unit)
+{
+ struct hfi1_devdata *dd;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hfi1_devs_lock, flags);
+ dd = __hfi1_lookup(unit);
+ spin_unlock_irqrestore(&hfi1_devs_lock, flags);
+
+ return dd;
+}
+
+/*
+ * Stop the timers during unit shutdown, or after an error late
+ * in initialization.
+ */
+static void stop_timers(struct hfi1_devdata *dd)
+{
+ struct hfi1_pportdata *ppd;
+ int pidx;
+
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ ppd = dd->pport + pidx;
+ if (ppd->led_override_timer.data) {
+ del_timer_sync(&ppd->led_override_timer);
+ atomic_set(&ppd->led_override_timer_active, 0);
+ }
+ }
+}
+
+/**
+ * shutdown_device - shut down a device
+ * @dd: the hfi1_ib device
+ *
+ * This is called to make the device quiet when we are about to
+ * unload the driver, and also when the device is administratively
+ * disabled. It does not free any data structures.
+ * Everything it does has to be setup again by hfi1_init(dd, 1)
+ */
+static void shutdown_device(struct hfi1_devdata *dd)
+{
+ struct hfi1_pportdata *ppd;
+ unsigned pidx;
+ int i;
+
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ ppd = dd->pport + pidx;
+
+ ppd->linkup = 0;
+ if (ppd->statusp)
+ *ppd->statusp &= ~(HFI1_STATUS_IB_CONF |
+ HFI1_STATUS_IB_READY);
+ }
+ dd->flags &= ~HFI1_INITTED;
+
+ /* mask interrupts, but not errors */
+ set_intr_state(dd, 0);
+
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ ppd = dd->pport + pidx;
+ for (i = 0; i < dd->num_rcv_contexts; i++)
+ hfi1_rcvctrl(dd, HFI1_RCVCTRL_TAILUPD_DIS |
+ HFI1_RCVCTRL_CTXT_DIS |
+ HFI1_RCVCTRL_INTRAVAIL_DIS |
+ HFI1_RCVCTRL_PKEY_DIS |
+ HFI1_RCVCTRL_ONE_PKT_EGR_DIS, i);
+ /*
+ * Gracefully stop all sends allowing any in progress to
+ * trickle out first.
+ */
+ for (i = 0; i < dd->num_send_contexts; i++)
+ sc_flush(dd->send_contexts[i].sc);
+ }
+
+ /*
+ * Enough for anything that's going to trickle out to have actually
+ * done so.
+ */
+ udelay(20);
+
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ ppd = dd->pport + pidx;
+
+ /* disable all contexts */
+ for (i = 0; i < dd->num_send_contexts; i++)
+ sc_disable(dd->send_contexts[i].sc);
+ /* disable the send device */
+ pio_send_control(dd, PSC_GLOBAL_DISABLE);
+
+ shutdown_led_override(ppd);
+
+ /*
+ * Clear SerdesEnable.
+ * We can't count on interrupts since we are stopping.
+ */
+ hfi1_quiet_serdes(ppd);
+
+ if (ppd->hfi1_wq) {
+ destroy_workqueue(ppd->hfi1_wq);
+ ppd->hfi1_wq = NULL;
+ }
+ }
+ sdma_exit(dd);
+}
+
+/**
+ * hfi1_free_ctxtdata - free a context's allocated data
+ * @dd: the hfi1_ib device
+ * @rcd: the ctxtdata structure
+ *
+ * free up any allocated data for a context
+ * This should not touch anything that would affect a simultaneous
+ * re-allocation of context data, because it is called after hfi1_mutex
+ * is released (and can be called from reinit as well).
+ * It should never change any chip state, or global driver state.
+ */
+void hfi1_free_ctxtdata(struct hfi1_devdata *dd, struct hfi1_ctxtdata *rcd)
+{
+ unsigned e;
+
+ if (!rcd)
+ return;
+
+ if (rcd->rcvhdrq) {
+ dma_free_coherent(&dd->pcidev->dev, rcd->rcvhdrq_size,
+ rcd->rcvhdrq, rcd->rcvhdrq_phys);
+ rcd->rcvhdrq = NULL;
+ if (rcd->rcvhdrtail_kvaddr) {
+ dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
+ (void *)rcd->rcvhdrtail_kvaddr,
+ rcd->rcvhdrqtailaddr_phys);
+ rcd->rcvhdrtail_kvaddr = NULL;
+ }
+ }
+
+ /* all the RcvArray entries should have been cleared by now */
+ kfree(rcd->egrbufs.rcvtids);
+
+ for (e = 0; e < rcd->egrbufs.alloced; e++) {
+ if (rcd->egrbufs.buffers[e].phys)
+ dma_free_coherent(&dd->pcidev->dev,
+ rcd->egrbufs.buffers[e].len,
+ rcd->egrbufs.buffers[e].addr,
+ rcd->egrbufs.buffers[e].phys);
+ }
+ kfree(rcd->egrbufs.buffers);
+
+ sc_free(rcd->sc);
+ vfree(rcd->user_event_mask);
+ vfree(rcd->subctxt_uregbase);
+ vfree(rcd->subctxt_rcvegrbuf);
+ vfree(rcd->subctxt_rcvhdr_base);
+ kfree(rcd->opstats);
+ kfree(rcd);
+}
+
+/*
+ * Release our hold on the shared asic data. If we are the last one,
+ * free the structure. Must be holding hfi1_devs_lock.
+ */
+static void release_asic_data(struct hfi1_devdata *dd)
+{
+ int other;
+
+ if (!dd->asic_data)
+ return;
+ dd->asic_data->dds[dd->hfi1_id] = NULL;
+ other = dd->hfi1_id ? 0 : 1;
+ if (!dd->asic_data->dds[other]) {
+ /* we are the last holder, free it */
+ kfree(dd->asic_data);
+ }
+ dd->asic_data = NULL;
+}
+
+static void __hfi1_free_devdata(struct kobject *kobj)
+{
+ struct hfi1_devdata *dd =
+ container_of(kobj, struct hfi1_devdata, kobj);
+ unsigned long flags;
+
+ spin_lock_irqsave(&hfi1_devs_lock, flags);
+ idr_remove(&hfi1_unit_table, dd->unit);
+ list_del(&dd->list);
+ release_asic_data(dd);
+ spin_unlock_irqrestore(&hfi1_devs_lock, flags);
+ free_platform_config(dd);
+ rcu_barrier(); /* wait for rcu callbacks to complete */
+ free_percpu(dd->int_counter);
+ free_percpu(dd->rcv_limit);
+ hfi1_dev_affinity_free(dd);
+ free_percpu(dd->send_schedule);
+ rvt_dealloc_device(&dd->verbs_dev.rdi);
+}
+
+static struct kobj_type hfi1_devdata_type = {
+ .release = __hfi1_free_devdata,
+};
+
+void hfi1_free_devdata(struct hfi1_devdata *dd)
+{
+ kobject_put(&dd->kobj);
+}
+
+/*
+ * Allocate our primary per-unit data structure. Must be done via verbs
+ * allocator, because the verbs cleanup process both does cleanup and
+ * free of the data structure.
+ * "extra" is for chip-specific data.
+ *
+ * Use the idr mechanism to get a unit number for this unit.
+ */
+struct hfi1_devdata *hfi1_alloc_devdata(struct pci_dev *pdev, size_t extra)
+{
+ unsigned long flags;
+ struct hfi1_devdata *dd;
+ int ret, nports;
+
+ /* extra is * number of ports */
+ nports = extra / sizeof(struct hfi1_pportdata);
+
+ dd = (struct hfi1_devdata *)rvt_alloc_device(sizeof(*dd) + extra,
+ nports);
+ if (!dd)
+ return ERR_PTR(-ENOMEM);
+ dd->num_pports = nports;
+ dd->pport = (struct hfi1_pportdata *)(dd + 1);
+
+ INIT_LIST_HEAD(&dd->list);
+ idr_preload(GFP_KERNEL);
+ spin_lock_irqsave(&hfi1_devs_lock, flags);
+
+ ret = idr_alloc(&hfi1_unit_table, dd, 0, 0, GFP_NOWAIT);
+ if (ret >= 0) {
+ dd->unit = ret;
+ list_add(&dd->list, &hfi1_dev_list);
+ }
+
+ spin_unlock_irqrestore(&hfi1_devs_lock, flags);
+ idr_preload_end();
+
+ if (ret < 0) {
+ hfi1_early_err(&pdev->dev,
+ "Could not allocate unit ID: error %d\n", -ret);
+ goto bail;
+ }
+ /*
+ * Initialize all locks for the device. This needs to be as early as
+ * possible so locks are usable.
+ */
+ spin_lock_init(&dd->sc_lock);
+ spin_lock_init(&dd->sendctrl_lock);
+ spin_lock_init(&dd->rcvctrl_lock);
+ spin_lock_init(&dd->uctxt_lock);
+ spin_lock_init(&dd->hfi1_diag_trans_lock);
+ spin_lock_init(&dd->sc_init_lock);
+ spin_lock_init(&dd->dc8051_lock);
+ spin_lock_init(&dd->dc8051_memlock);
+ seqlock_init(&dd->sc2vl_lock);
+ spin_lock_init(&dd->sde_map_lock);
+ spin_lock_init(&dd->pio_map_lock);
+ init_waitqueue_head(&dd->event_queue);
+
+ dd->int_counter = alloc_percpu(u64);
+ if (!dd->int_counter) {
+ ret = -ENOMEM;
+ hfi1_early_err(&pdev->dev,
+ "Could not allocate per-cpu int_counter\n");
+ goto bail;
+ }
+
+ dd->rcv_limit = alloc_percpu(u64);
+ if (!dd->rcv_limit) {
+ ret = -ENOMEM;
+ hfi1_early_err(&pdev->dev,
+ "Could not allocate per-cpu rcv_limit\n");
+ goto bail;
+ }
+
+ dd->send_schedule = alloc_percpu(u64);
+ if (!dd->send_schedule) {
+ ret = -ENOMEM;
+ hfi1_early_err(&pdev->dev,
+ "Could not allocate per-cpu int_counter\n");
+ goto bail;
+ }
+
+ if (!hfi1_cpulist_count) {
+ u32 count = num_online_cpus();
+
+ hfi1_cpulist = kcalloc(BITS_TO_LONGS(count), sizeof(long),
+ GFP_KERNEL);
+ if (hfi1_cpulist)
+ hfi1_cpulist_count = count;
+ else
+ hfi1_early_err(
+ &pdev->dev,
+ "Could not alloc cpulist info, cpu affinity might be wrong\n");
+ }
+ kobject_init(&dd->kobj, &hfi1_devdata_type);
+ return dd;
+
+bail:
+ if (!list_empty(&dd->list))
+ list_del_init(&dd->list);
+ rvt_dealloc_device(&dd->verbs_dev.rdi);
+ return ERR_PTR(ret);
+}
+
+/*
+ * Called from freeze mode handlers, and from PCI error
+ * reporting code. Should be paranoid about state of
+ * system and data structures.
+ */
+void hfi1_disable_after_error(struct hfi1_devdata *dd)
+{
+ if (dd->flags & HFI1_INITTED) {
+ u32 pidx;
+
+ dd->flags &= ~HFI1_INITTED;
+ if (dd->pport)
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ struct hfi1_pportdata *ppd;
+
+ ppd = dd->pport + pidx;
+ if (dd->flags & HFI1_PRESENT)
+ set_link_state(ppd, HLS_DN_DISABLE);
+
+ if (ppd->statusp)
+ *ppd->statusp &= ~HFI1_STATUS_IB_READY;
+ }
+ }
+
+ /*
+ * Mark as having had an error for driver, and also
+ * for /sys and status word mapped to user programs.
+ * This marks unit as not usable, until reset.
+ */
+ if (dd->status)
+ dd->status->dev |= HFI1_STATUS_HWERROR;
+}
+
+static void remove_one(struct pci_dev *);
+static int init_one(struct pci_dev *, const struct pci_device_id *);
+
+#define DRIVER_LOAD_MSG "Intel " DRIVER_NAME " loaded: "
+#define PFX DRIVER_NAME ": "
+
+static const struct pci_device_id hfi1_pci_tbl[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL0) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL1) },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, hfi1_pci_tbl);
+
+static struct pci_driver hfi1_pci_driver = {
+ .name = DRIVER_NAME,
+ .probe = init_one,
+ .remove = remove_one,
+ .id_table = hfi1_pci_tbl,
+ .err_handler = &hfi1_pci_err_handler,
+};
+
+static void __init compute_krcvqs(void)
+{
+ int i;
+
+ for (i = 0; i < krcvqsset; i++)
+ n_krcvqs += krcvqs[i];
+}
+
+/*
+ * Do all the generic driver unit- and chip-independent memory
+ * allocation and initialization.
+ */
+static int __init hfi1_mod_init(void)
+{
+ int ret;
+
+ ret = dev_init();
+ if (ret)
+ goto bail;
+
+ /* validate max MTU before any devices start */
+ if (!valid_opa_max_mtu(hfi1_max_mtu)) {
+ pr_err("Invalid max_mtu 0x%x, using 0x%x instead\n",
+ hfi1_max_mtu, HFI1_DEFAULT_MAX_MTU);
+ hfi1_max_mtu = HFI1_DEFAULT_MAX_MTU;
+ }
+ /* valid CUs run from 1-128 in powers of 2 */
+ if (hfi1_cu > 128 || !is_power_of_2(hfi1_cu))
+ hfi1_cu = 1;
+ /* valid credit return threshold is 0-100, variable is unsigned */
+ if (user_credit_return_threshold > 100)
+ user_credit_return_threshold = 100;
+
+ compute_krcvqs();
+ /*
+ * sanitize receive interrupt count, time must wait until after
+ * the hardware type is known
+ */
+ if (rcv_intr_count > RCV_HDR_HEAD_COUNTER_MASK)
+ rcv_intr_count = RCV_HDR_HEAD_COUNTER_MASK;
+ /* reject invalid combinations */
+ if (rcv_intr_count == 0 && rcv_intr_timeout == 0) {
+ pr_err("Invalid mode: both receive interrupt count and available timeout are zero - setting interrupt count to 1\n");
+ rcv_intr_count = 1;
+ }
+ if (rcv_intr_count > 1 && rcv_intr_timeout == 0) {
+ /*
+ * Avoid indefinite packet delivery by requiring a timeout
+ * if count is > 1.
+ */
+ pr_err("Invalid mode: receive interrupt count greater than 1 and available timeout is zero - setting available timeout to 1\n");
+ rcv_intr_timeout = 1;
+ }
+ if (rcv_intr_dynamic && !(rcv_intr_count > 1 && rcv_intr_timeout > 0)) {
+ /*
+ * The dynamic algorithm expects a non-zero timeout
+ * and a count > 1.
+ */
+ pr_err("Invalid mode: dynamic receive interrupt mitigation with invalid count and timeout - turning dynamic off\n");
+ rcv_intr_dynamic = 0;
+ }
+
+ /* sanitize link CRC options */
+ link_crc_mask &= SUPPORTED_CRCS;
+
+ /*
+ * These must be called before the driver is registered with
+ * the PCI subsystem.
+ */
+ idr_init(&hfi1_unit_table);
+
+ hfi1_dbg_init();
+ ret = hfi1_wss_init();
+ if (ret < 0)
+ goto bail_wss;
+ ret = pci_register_driver(&hfi1_pci_driver);
+ if (ret < 0) {
+ pr_err("Unable to register driver: error %d\n", -ret);
+ goto bail_dev;
+ }
+ goto bail; /* all OK */
+
+bail_dev:
+ hfi1_wss_exit();
+bail_wss:
+ hfi1_dbg_exit();
+ idr_destroy(&hfi1_unit_table);
+ dev_cleanup();
+bail:
+ return ret;
+}
+
+module_init(hfi1_mod_init);
+
+/*
+ * Do the non-unit driver cleanup, memory free, etc. at unload.
+ */
+static void __exit hfi1_mod_cleanup(void)
+{
+ pci_unregister_driver(&hfi1_pci_driver);
+ hfi1_wss_exit();
+ hfi1_dbg_exit();
+ hfi1_cpulist_count = 0;
+ kfree(hfi1_cpulist);
+
+ idr_destroy(&hfi1_unit_table);
+ dispose_firmware(); /* asymmetric with obtain_firmware() */
+ dev_cleanup();
+}
+
+module_exit(hfi1_mod_cleanup);
+
+/* this can only be called after a successful initialization */
+static void cleanup_device_data(struct hfi1_devdata *dd)
+{
+ int ctxt;
+ int pidx;
+ struct hfi1_ctxtdata **tmp;
+ unsigned long flags;
+
+ /* users can't do anything more with chip */
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ struct hfi1_pportdata *ppd = &dd->pport[pidx];
+ struct cc_state *cc_state;
+ int i;
+
+ if (ppd->statusp)
+ *ppd->statusp &= ~HFI1_STATUS_CHIP_PRESENT;
+
+ for (i = 0; i < OPA_MAX_SLS; i++)
+ hrtimer_cancel(&ppd->cca_timer[i].hrtimer);
+
+ spin_lock(&ppd->cc_state_lock);
+ cc_state = get_cc_state(ppd);
+ RCU_INIT_POINTER(ppd->cc_state, NULL);
+ spin_unlock(&ppd->cc_state_lock);
+
+ if (cc_state)
+ call_rcu(&cc_state->rcu, cc_state_reclaim);
+ }
+
+ free_credit_return(dd);
+
+ /*
+ * Free any resources still in use (usually just kernel contexts)
+ * at unload; we do for ctxtcnt, because that's what we allocate.
+ * We acquire lock to be really paranoid that rcd isn't being
+ * accessed from some interrupt-related code (that should not happen,
+ * but best to be sure).
+ */
+ spin_lock_irqsave(&dd->uctxt_lock, flags);
+ tmp = dd->rcd;
+ dd->rcd = NULL;
+ spin_unlock_irqrestore(&dd->uctxt_lock, flags);
+
+ if (dd->rcvhdrtail_dummy_kvaddr) {
+ dma_free_coherent(&dd->pcidev->dev, sizeof(u64),
+ (void *)dd->rcvhdrtail_dummy_kvaddr,
+ dd->rcvhdrtail_dummy_physaddr);
+ dd->rcvhdrtail_dummy_kvaddr = NULL;
+ }
+
+ for (ctxt = 0; tmp && ctxt < dd->num_rcv_contexts; ctxt++) {
+ struct hfi1_ctxtdata *rcd = tmp[ctxt];
+
+ tmp[ctxt] = NULL; /* debugging paranoia */
+ if (rcd) {
+ hfi1_clear_tids(rcd);
+ hfi1_free_ctxtdata(dd, rcd);
+ }
+ }
+ kfree(tmp);
+ free_pio_map(dd);
+ /* must follow rcv context free - need to remove rcv's hooks */
+ for (ctxt = 0; ctxt < dd->num_send_contexts; ctxt++)
+ sc_free(dd->send_contexts[ctxt].sc);
+ dd->num_send_contexts = 0;
+ kfree(dd->send_contexts);
+ dd->send_contexts = NULL;
+ kfree(dd->hw_to_sw);
+ dd->hw_to_sw = NULL;
+ kfree(dd->boardname);
+ vfree(dd->events);
+ vfree(dd->status);
+}
+
+/*
+ * Clean up on unit shutdown, or error during unit load after
+ * successful initialization.
+ */
+static void postinit_cleanup(struct hfi1_devdata *dd)
+{
+ hfi1_start_cleanup(dd);
+
+ hfi1_pcie_ddcleanup(dd);
+ hfi1_pcie_cleanup(dd->pcidev);
+
+ cleanup_device_data(dd);
+
+ hfi1_free_devdata(dd);
+}
+
+static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ int ret = 0, j, pidx, initfail;
+ struct hfi1_devdata *dd = NULL;
+ struct hfi1_pportdata *ppd;
+
+ /* First, lock the non-writable module parameters */
+ HFI1_CAP_LOCK();
+
+ /* Validate some global module parameters */
+ if (rcvhdrcnt <= HFI1_MIN_HDRQ_EGRBUF_CNT) {
+ hfi1_early_err(&pdev->dev, "Header queue count too small\n");
+ ret = -EINVAL;
+ goto bail;
+ }
+ if (rcvhdrcnt > HFI1_MAX_HDRQ_EGRBUF_CNT) {
+ hfi1_early_err(&pdev->dev,
+ "Receive header queue count cannot be greater than %u\n",
+ HFI1_MAX_HDRQ_EGRBUF_CNT);
+ ret = -EINVAL;
+ goto bail;
+ }
+ /* use the encoding function as a sanitization check */
+ if (!encode_rcv_header_entry_size(hfi1_hdrq_entsize)) {
+ hfi1_early_err(&pdev->dev, "Invalid HdrQ Entry size %u\n",
+ hfi1_hdrq_entsize);
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ /* The receive eager buffer size must be set before the receive
+ * contexts are created.
+ *
+ * Set the eager buffer size. Validate that it falls in a range
+ * allowed by the hardware - all powers of 2 between the min and
+ * max. The maximum valid MTU is within the eager buffer range
+ * so we do not need to cap the max_mtu by an eager buffer size
+ * setting.
+ */
+ if (eager_buffer_size) {
+ if (!is_power_of_2(eager_buffer_size))
+ eager_buffer_size =
+ roundup_pow_of_two(eager_buffer_size);
+ eager_buffer_size =
+ clamp_val(eager_buffer_size,
+ MIN_EAGER_BUFFER * 8,
+ MAX_EAGER_BUFFER_TOTAL);
+ hfi1_early_info(&pdev->dev, "Eager buffer size %u\n",
+ eager_buffer_size);
+ } else {
+ hfi1_early_err(&pdev->dev, "Invalid Eager buffer size of 0\n");
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ /* restrict value of hfi1_rcvarr_split */
+ hfi1_rcvarr_split = clamp_val(hfi1_rcvarr_split, 0, 100);
+
+ ret = hfi1_pcie_init(pdev, ent);
+ if (ret)
+ goto bail;
+
+ /*
+ * Do device-specific initialization, function table setup, dd
+ * allocation, etc.
+ */
+ switch (ent->device) {
+ case PCI_DEVICE_ID_INTEL0:
+ case PCI_DEVICE_ID_INTEL1:
+ dd = hfi1_init_dd(pdev, ent);
+ break;
+ default:
+ hfi1_early_err(&pdev->dev,
+ "Failing on unknown Intel deviceid 0x%x\n",
+ ent->device);
+ ret = -ENODEV;
+ }
+
+ if (IS_ERR(dd))
+ ret = PTR_ERR(dd);
+ if (ret)
+ goto clean_bail; /* error already printed */
+
+ ret = create_workqueues(dd);
+ if (ret)
+ goto clean_bail;
+
+ /* do the generic initialization */
+ initfail = hfi1_init(dd, 0);
+
+ ret = hfi1_register_ib_device(dd);
+
+ /*
+ * Now ready for use. this should be cleared whenever we
+ * detect a reset, or initiate one. If earlier failure,
+ * we still create devices, so diags, etc. can be used
+ * to determine cause of problem.
+ */
+ if (!initfail && !ret) {
+ dd->flags |= HFI1_INITTED;
+ /* create debufs files after init and ib register */
+ hfi1_dbg_ibdev_init(&dd->verbs_dev);
+ }
+
+ j = hfi1_device_create(dd);
+ if (j)
+ dd_dev_err(dd, "Failed to create /dev devices: %d\n", -j);
+
+ if (initfail || ret) {
+ stop_timers(dd);
+ flush_workqueue(ib_wq);
+ for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+ hfi1_quiet_serdes(dd->pport + pidx);
+ ppd = dd->pport + pidx;
+ if (ppd->hfi1_wq) {
+ destroy_workqueue(ppd->hfi1_wq);
+ ppd->hfi1_wq = NULL;
+ }
+ }
+ if (!j)
+ hfi1_device_remove(dd);
+ if (!ret)
+ hfi1_unregister_ib_device(dd);
+ postinit_cleanup(dd);
+ if (initfail)
+ ret = initfail;
+ goto bail; /* everything already cleaned */
+ }
+
+ sdma_start(dd);
+
+ return 0;
+
+clean_bail:
+ hfi1_pcie_cleanup(pdev);
+bail:
+ return ret;
+}
+
+static void remove_one(struct pci_dev *pdev)
+{
+ struct hfi1_devdata *dd = pci_get_drvdata(pdev);
+
+ /* close debugfs files before ib unregister */
+ hfi1_dbg_ibdev_exit(&dd->verbs_dev);
+ /* unregister from IB core */
+ hfi1_unregister_ib_device(dd);
+
+ /*
+ * Disable the IB link, disable interrupts on the device,
+ * clear dma engines, etc.
+ */
+ shutdown_device(dd);
+
+ stop_timers(dd);
+
+ /* wait until all of our (qsfp) queue_work() calls complete */
+ flush_workqueue(ib_wq);
+
+ hfi1_device_remove(dd);
+
+ postinit_cleanup(dd);
+}
+
+/**
+ * hfi1_create_rcvhdrq - create a receive header queue
+ * @dd: the hfi1_ib device
+ * @rcd: the context data
+ *
+ * This must be contiguous memory (from an i/o perspective), and must be
+ * DMA'able (which means for some systems, it will go through an IOMMU,
+ * or be forced into a low address range).
+ */
+int hfi1_create_rcvhdrq(struct hfi1_devdata *dd, struct hfi1_ctxtdata *rcd)
+{
+ unsigned amt;
+ u64 reg;
+
+ if (!rcd->rcvhdrq) {
+ dma_addr_t phys_hdrqtail;
+ gfp_t gfp_flags;
+
+ /*
+ * rcvhdrqentsize is in DWs, so we have to convert to bytes
+ * (* sizeof(u32)).
+ */
+ amt = PAGE_ALIGN(rcd->rcvhdrq_cnt * rcd->rcvhdrqentsize *
+ sizeof(u32));
+
+ gfp_flags = (rcd->ctxt >= dd->first_user_ctxt) ?
+ GFP_USER : GFP_KERNEL;
+ rcd->rcvhdrq = dma_zalloc_coherent(
+ &dd->pcidev->dev, amt, &rcd->rcvhdrq_phys,
+ gfp_flags | __GFP_COMP);
+
+ if (!rcd->rcvhdrq) {
+ dd_dev_err(dd,
+ "attempt to allocate %d bytes for ctxt %u rcvhdrq failed\n",
+ amt, rcd->ctxt);
+ goto bail;
+ }
+
+ if (HFI1_CAP_KGET_MASK(rcd->flags, DMA_RTAIL)) {
+ rcd->rcvhdrtail_kvaddr = dma_zalloc_coherent(
+ &dd->pcidev->dev, PAGE_SIZE, &phys_hdrqtail,
+ gfp_flags);
+ if (!rcd->rcvhdrtail_kvaddr)
+ goto bail_free;
+ rcd->rcvhdrqtailaddr_phys = phys_hdrqtail;
+ }
+
+ rcd->rcvhdrq_size = amt;
+ }
+ /*
+ * These values are per-context:
+ * RcvHdrCnt
+ * RcvHdrEntSize
+ * RcvHdrSize
+ */
+ reg = ((u64)(rcd->rcvhdrq_cnt >> HDRQ_SIZE_SHIFT)
+ & RCV_HDR_CNT_CNT_MASK)
+ << RCV_HDR_CNT_CNT_SHIFT;
+ write_kctxt_csr(dd, rcd->ctxt, RCV_HDR_CNT, reg);
+ reg = (encode_rcv_header_entry_size(rcd->rcvhdrqentsize)
+ & RCV_HDR_ENT_SIZE_ENT_SIZE_MASK)
+ << RCV_HDR_ENT_SIZE_ENT_SIZE_SHIFT;
+ write_kctxt_csr(dd, rcd->ctxt, RCV_HDR_ENT_SIZE, reg);
+ reg = (dd->rcvhdrsize & RCV_HDR_SIZE_HDR_SIZE_MASK)
+ << RCV_HDR_SIZE_HDR_SIZE_SHIFT;
+ write_kctxt_csr(dd, rcd->ctxt, RCV_HDR_SIZE, reg);
+
+ /*
+ * Program dummy tail address for every receive context
+ * before enabling any receive context
+ */
+ write_kctxt_csr(dd, rcd->ctxt, RCV_HDR_TAIL_ADDR,
+ dd->rcvhdrtail_dummy_physaddr);
+
+ return 0;
+
+bail_free:
+ dd_dev_err(dd,
+ "attempt to allocate 1 page for ctxt %u rcvhdrqtailaddr failed\n",
+ rcd->ctxt);
+ vfree(rcd->user_event_mask);
+ rcd->user_event_mask = NULL;
+ dma_free_coherent(&dd->pcidev->dev, amt, rcd->rcvhdrq,
+ rcd->rcvhdrq_phys);
+ rcd->rcvhdrq = NULL;
+bail:
+ return -ENOMEM;
+}
+
+/**
+ * allocate eager buffers, both kernel and user contexts.
+ * @rcd: the context we are setting up.
+ *
+ * Allocate the eager TID buffers and program them into hip.
+ * They are no longer completely contiguous, we do multiple allocation
+ * calls. Otherwise we get the OOM code involved, by asking for too
+ * much per call, with disastrous results on some kernels.
+ */
+int hfi1_setup_eagerbufs(struct hfi1_ctxtdata *rcd)
+{
+ struct hfi1_devdata *dd = rcd->dd;
+ u32 max_entries, egrtop, alloced_bytes = 0, idx = 0;
+ gfp_t gfp_flags;
+ u16 order;
+ int ret = 0;
+ u16 round_mtu = roundup_pow_of_two(hfi1_max_mtu);
+
+ /*
+ * GFP_USER, but without GFP_FS, so buffer cache can be
+ * coalesced (we hope); otherwise, even at order 4,
+ * heavy filesystem activity makes these fail, and we can
+ * use compound pages.
+ */
+ gfp_flags = __GFP_RECLAIM | __GFP_IO | __GFP_COMP;
+
+ /*
+ * The minimum size of the eager buffers is a groups of MTU-sized
+ * buffers.
+ * The global eager_buffer_size parameter is checked against the
+ * theoretical lower limit of the value. Here, we check against the
+ * MTU.
+ */
+ if (rcd->egrbufs.size < (round_mtu * dd->rcv_entries.group_size))
+ rcd->egrbufs.size = round_mtu * dd->rcv_entries.group_size;
+ /*
+ * If using one-pkt-per-egr-buffer, lower the eager buffer
+ * size to the max MTU (page-aligned).
+ */
+ if (!HFI1_CAP_KGET_MASK(rcd->flags, MULTI_PKT_EGR))
+ rcd->egrbufs.rcvtid_size = round_mtu;
+
+ /*
+ * Eager buffers sizes of 1MB or less require smaller TID sizes
+ * to satisfy the "multiple of 8 RcvArray entries" requirement.
+ */
+ if (rcd->egrbufs.size <= (1 << 20))
+ rcd->egrbufs.rcvtid_size = max((unsigned long)round_mtu,
+ rounddown_pow_of_two(rcd->egrbufs.size / 8));
+
+ while (alloced_bytes < rcd->egrbufs.size &&
+ rcd->egrbufs.alloced < rcd->egrbufs.count) {
+ rcd->egrbufs.buffers[idx].addr =
+ dma_zalloc_coherent(&dd->pcidev->dev,
+ rcd->egrbufs.rcvtid_size,
+ &rcd->egrbufs.buffers[idx].phys,
+ gfp_flags);
+ if (rcd->egrbufs.buffers[idx].addr) {
+ rcd->egrbufs.buffers[idx].len =
+ rcd->egrbufs.rcvtid_size;
+ rcd->egrbufs.rcvtids[rcd->egrbufs.alloced].addr =
+ rcd->egrbufs.buffers[idx].addr;
+ rcd->egrbufs.rcvtids[rcd->egrbufs.alloced].phys =
+ rcd->egrbufs.buffers[idx].phys;
+ rcd->egrbufs.alloced++;
+ alloced_bytes += rcd->egrbufs.rcvtid_size;
+ idx++;
+ } else {
+ u32 new_size, i, j;
+ u64 offset = 0;
+
+ /*
+ * Fail the eager buffer allocation if:
+ * - we are already using the lowest acceptable size
+ * - we are using one-pkt-per-egr-buffer (this implies
+ * that we are accepting only one size)
+ */
+ if (rcd->egrbufs.rcvtid_size == round_mtu ||
+ !HFI1_CAP_KGET_MASK(rcd->flags, MULTI_PKT_EGR)) {
+ dd_dev_err(dd, "ctxt%u: Failed to allocate eager buffers\n",
+ rcd->ctxt);
+ goto bail_rcvegrbuf_phys;
+ }
+
+ new_size = rcd->egrbufs.rcvtid_size / 2;
+
+ /*
+ * If the first attempt to allocate memory failed, don't
+ * fail everything but continue with the next lower
+ * size.
+ */
+ if (idx == 0) {
+ rcd->egrbufs.rcvtid_size = new_size;
+ continue;
+ }
+
+ /*
+ * Re-partition already allocated buffers to a smaller
+ * size.
+ */
+ rcd->egrbufs.alloced = 0;
+ for (i = 0, j = 0, offset = 0; j < idx; i++) {
+ if (i >= rcd->egrbufs.count)
+ break;
+ rcd->egrbufs.rcvtids[i].phys =
+ rcd->egrbufs.buffers[j].phys + offset;
+ rcd->egrbufs.rcvtids[i].addr =
+ rcd->egrbufs.buffers[j].addr + offset;
+ rcd->egrbufs.alloced++;
+ if ((rcd->egrbufs.buffers[j].phys + offset +
+ new_size) ==
+ (rcd->egrbufs.buffers[j].phys +
+ rcd->egrbufs.buffers[j].len)) {
+ j++;
+ offset = 0;
+ } else {
+ offset += new_size;
+ }
+ }
+ rcd->egrbufs.rcvtid_size = new_size;
+ }
+ }
+ rcd->egrbufs.numbufs = idx;
+ rcd->egrbufs.size = alloced_bytes;
+
+ hfi1_cdbg(PROC,
+ "ctxt%u: Alloced %u rcv tid entries @ %uKB, total %zuKB\n",
+ rcd->ctxt, rcd->egrbufs.alloced, rcd->egrbufs.rcvtid_size,
+ rcd->egrbufs.size);
+
+ /*
+ * Set the contexts rcv array head update threshold to the closest
+ * power of 2 (so we can use a mask instead of modulo) below half
+ * the allocated entries.
+ */
+ rcd->egrbufs.threshold =
+ rounddown_pow_of_two(rcd->egrbufs.alloced / 2);
+ /*
+ * Compute the expected RcvArray entry base. This is done after
+ * allocating the eager buffers in order to maximize the
+ * expected RcvArray entries for the context.
+ */
+ max_entries = rcd->rcv_array_groups * dd->rcv_entries.group_size;
+ egrtop = roundup(rcd->egrbufs.alloced, dd->rcv_entries.group_size);
+ rcd->expected_count = max_entries - egrtop;
+ if (rcd->expected_count > MAX_TID_PAIR_ENTRIES * 2)
+ rcd->expected_count = MAX_TID_PAIR_ENTRIES * 2;
+
+ rcd->expected_base = rcd->eager_base + egrtop;
+ hfi1_cdbg(PROC, "ctxt%u: eager:%u, exp:%u, egrbase:%u, expbase:%u\n",
+ rcd->ctxt, rcd->egrbufs.alloced, rcd->expected_count,
+ rcd->eager_base, rcd->expected_base);
+
+ if (!hfi1_rcvbuf_validate(rcd->egrbufs.rcvtid_size, PT_EAGER, &order)) {
+ hfi1_cdbg(PROC,
+ "ctxt%u: current Eager buffer size is invalid %u\n",
+ rcd->ctxt, rcd->egrbufs.rcvtid_size);
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ for (idx = 0; idx < rcd->egrbufs.alloced; idx++) {
+ hfi1_put_tid(dd, rcd->eager_base + idx, PT_EAGER,
+ rcd->egrbufs.rcvtids[idx].phys, order);
+ cond_resched();
+ }
+ goto bail;
+
+bail_rcvegrbuf_phys:
+ for (idx = 0; idx < rcd->egrbufs.alloced &&
+ rcd->egrbufs.buffers[idx].addr;
+ idx++) {
+ dma_free_coherent(&dd->pcidev->dev,
+ rcd->egrbufs.buffers[idx].len,
+ rcd->egrbufs.buffers[idx].addr,
+ rcd->egrbufs.buffers[idx].phys);
+ rcd->egrbufs.buffers[idx].addr = NULL;
+ rcd->egrbufs.buffers[idx].phys = 0;
+ rcd->egrbufs.buffers[idx].len = 0;
+ }
+bail:
+ return ret;
+}