summaryrefslogtreecommitdiffstats
path: root/drivers/iio
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio')
-rw-r--r--drivers/iio/accel/st_accel.h3
-rw-r--r--drivers/iio/accel/st_accel_core.c22
-rw-r--r--drivers/iio/accel/st_accel_i2c.c3
-rw-r--r--drivers/iio/accel/st_accel_spi.c3
-rw-r--r--drivers/iio/adc/Kconfig14
-rw-r--r--drivers/iio/adc/Makefile1
-rw-r--r--drivers/iio/adc/exynos_adc.c62
-rw-r--r--drivers/iio/adc/mcp320x.c222
-rw-r--r--drivers/iio/adc/qcom-spmi-iadc.c595
-rw-r--r--drivers/iio/adc/rockchip_saradc.c64
-rw-r--r--drivers/iio/adc/vf610_adc.c45
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_core.c126
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_i2c.c1
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_spi.c1
-rw-r--r--drivers/iio/gyro/st_gyro.h3
-rw-r--r--drivers/iio/gyro/st_gyro_core.c19
-rw-r--r--drivers/iio/gyro/st_gyro_i2c.c4
-rw-r--r--drivers/iio/gyro/st_gyro_spi.c4
-rw-r--r--drivers/iio/humidity/Kconfig10
-rw-r--r--drivers/iio/humidity/Makefile1
-rw-r--r--drivers/iio/humidity/si7020.c161
-rw-r--r--drivers/iio/inkern.c33
-rw-r--r--drivers/iio/magnetometer/st_magn.h3
-rw-r--r--drivers/iio/magnetometer/st_magn_core.c18
-rw-r--r--drivers/iio/magnetometer/st_magn_i2c.c3
-rw-r--r--drivers/iio/magnetometer/st_magn_spi.c3
-rw-r--r--drivers/iio/pressure/Kconfig11
-rw-r--r--drivers/iio/pressure/Makefile1
-rw-r--r--drivers/iio/pressure/bmp280.c455
-rw-r--r--drivers/iio/pressure/st_pressure.h3
-rw-r--r--drivers/iio/pressure/st_pressure_buffer.c12
-rw-r--r--drivers/iio/pressure/st_pressure_core.c49
-rw-r--r--drivers/iio/pressure/st_pressure_i2c.c11
-rw-r--r--drivers/iio/pressure/st_pressure_spi.c11
-rw-r--r--drivers/iio/proximity/as3935.c16
35 files changed, 1761 insertions, 232 deletions
diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
index c3877630b2e4..fa9646034305 100644
--- a/drivers/iio/accel/st_accel.h
+++ b/drivers/iio/accel/st_accel.h
@@ -33,8 +33,7 @@ static const struct st_sensors_platform_data default_accel_pdata = {
.drdy_int_pin = 1,
};
-int st_accel_common_probe(struct iio_dev *indio_dev,
- struct st_sensors_platform_data *pdata);
+int st_accel_common_probe(struct iio_dev *indio_dev);
void st_accel_common_remove(struct iio_dev *indio_dev);
#ifdef CONFIG_IIO_BUFFER
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 087864854c61..53f32629283a 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -161,7 +161,7 @@ static const struct iio_chan_spec st_accel_16bit_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(3)
};
-static const struct st_sensors st_accel_sensors[] = {
+static const struct st_sensor_settings st_accel_sensors_settings[] = {
{
.wai = ST_ACCEL_1_WAI_EXP,
.sensors_supported = {
@@ -457,8 +457,7 @@ static const struct iio_trigger_ops st_accel_trigger_ops = {
#define ST_ACCEL_TRIGGER_OPS NULL
#endif
-int st_accel_common_probe(struct iio_dev *indio_dev,
- struct st_sensors_platform_data *plat_data)
+int st_accel_common_probe(struct iio_dev *indio_dev)
{
struct st_sensor_data *adata = iio_priv(indio_dev);
int irq = adata->get_irq_data_ready(indio_dev);
@@ -470,24 +469,25 @@ int st_accel_common_probe(struct iio_dev *indio_dev,
st_sensors_power_enable(indio_dev);
err = st_sensors_check_device_support(indio_dev,
- ARRAY_SIZE(st_accel_sensors), st_accel_sensors);
+ ARRAY_SIZE(st_accel_sensors_settings),
+ st_accel_sensors_settings);
if (err < 0)
return err;
adata->num_data_channels = ST_ACCEL_NUMBER_DATA_CHANNELS;
- adata->multiread_bit = adata->sensor->multi_read_bit;
- indio_dev->channels = adata->sensor->ch;
+ adata->multiread_bit = adata->sensor_settings->multi_read_bit;
+ indio_dev->channels = adata->sensor_settings->ch;
indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
adata->current_fullscale = (struct st_sensor_fullscale_avl *)
- &adata->sensor->fs.fs_avl[0];
- adata->odr = adata->sensor->odr.odr_avl[0].hz;
+ &adata->sensor_settings->fs.fs_avl[0];
+ adata->odr = adata->sensor_settings->odr.odr_avl[0].hz;
- if (!plat_data)
- plat_data =
+ if (!adata->dev->platform_data)
+ adata->dev->platform_data =
(struct st_sensors_platform_data *)&default_accel_pdata;
- err = st_sensors_init_sensor(indio_dev, plat_data);
+ err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data);
if (err < 0)
return err;
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
index 7164aeff3ab1..c7246bdd30b9 100644
--- a/drivers/iio/accel/st_accel_i2c.c
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -79,12 +79,11 @@ static int st_accel_i2c_probe(struct i2c_client *client,
return -ENOMEM;
adata = iio_priv(indio_dev);
- adata->dev = &client->dev;
st_sensors_of_i2c_probe(client, st_accel_of_match);
st_sensors_i2c_configure(indio_dev, client, adata);
- err = st_accel_common_probe(indio_dev, client->dev.platform_data);
+ err = st_accel_common_probe(indio_dev);
if (err < 0)
return err;
diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
index 195639646e34..12ec29389e4b 100644
--- a/drivers/iio/accel/st_accel_spi.c
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -29,11 +29,10 @@ static int st_accel_spi_probe(struct spi_device *spi)
return -ENOMEM;
adata = iio_priv(indio_dev);
- adata->dev = &spi->dev;
st_sensors_spi_configure(indio_dev, spi, adata);
- err = st_accel_common_probe(indio_dev, spi->dev.platform_data);
+ err = st_accel_common_probe(indio_dev);
if (err < 0)
return err;
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 88bdc8f612e2..d0924f3cfa25 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -206,6 +206,20 @@ config NAU7802
To compile this driver as a module, choose M here: the
module will be called nau7802.
+config QCOM_SPMI_IADC
+ tristate "Qualcomm SPMI PMIC current ADC"
+ depends on SPMI
+ select REGMAP_SPMI
+ help
+ This is the IIO Current ADC driver for Qualcomm QPNP IADC Chip.
+
+ The driver supports single mode operation to read from one of two
+ channels (external or internal). Hardware have additional
+ channels internally used for gain and offset calibration.
+
+ To compile this driver as a module, choose M here: the module will
+ be called qcom-spmi-iadc.
+
config ROCKCHIP_SARADC
tristate "Rockchip SARADC driver"
depends on ARCH_ROCKCHIP || (ARM && COMPILE_TEST)
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index cb88a6a23b8f..c06718b9d8ce 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_MCP320X) += mcp320x.o
obj-$(CONFIG_MCP3422) += mcp3422.o
obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
obj-$(CONFIG_NAU7802) += nau7802.o
+obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o
obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index 43620fd4c66a..3a2dbb3b4926 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -39,6 +39,8 @@
#include <linux/iio/iio.h>
#include <linux/iio/machine.h>
#include <linux/iio/driver.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
/* S3C/EXYNOS4412/5250 ADC_V1 registers definitions */
#define ADC_V1_CON(x) ((x) + 0x00)
@@ -90,11 +92,14 @@
#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(100))
+#define EXYNOS_ADCV1_PHY_OFFSET 0x0718
+#define EXYNOS_ADCV2_PHY_OFFSET 0x0720
+
struct exynos_adc {
struct exynos_adc_data *data;
struct device *dev;
void __iomem *regs;
- void __iomem *enable_reg;
+ struct regmap *pmu_map;
struct clk *clk;
struct clk *sclk;
unsigned int irq;
@@ -110,6 +115,7 @@ struct exynos_adc_data {
int num_channels;
bool needs_sclk;
bool needs_adc_phy;
+ int phy_offset;
u32 mask;
void (*init_hw)(struct exynos_adc *info);
@@ -183,7 +189,7 @@ static void exynos_adc_v1_init_hw(struct exynos_adc *info)
u32 con1;
if (info->data->needs_adc_phy)
- writel(1, info->enable_reg);
+ regmap_write(info->pmu_map, info->data->phy_offset, 1);
/* set default prescaler values and Enable prescaler */
con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
@@ -198,7 +204,7 @@ static void exynos_adc_v1_exit_hw(struct exynos_adc *info)
u32 con;
if (info->data->needs_adc_phy)
- writel(0, info->enable_reg);
+ regmap_write(info->pmu_map, info->data->phy_offset, 0);
con = readl(ADC_V1_CON(info->regs));
con |= ADC_V1_CON_STANDBY;
@@ -225,6 +231,7 @@ static const struct exynos_adc_data exynos_adc_v1_data = {
.num_channels = MAX_ADC_V1_CHANNELS,
.mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
.needs_adc_phy = true,
+ .phy_offset = EXYNOS_ADCV1_PHY_OFFSET,
.init_hw = exynos_adc_v1_init_hw,
.exit_hw = exynos_adc_v1_exit_hw,
@@ -314,7 +321,7 @@ static void exynos_adc_v2_init_hw(struct exynos_adc *info)
u32 con1, con2;
if (info->data->needs_adc_phy)
- writel(1, info->enable_reg);
+ regmap_write(info->pmu_map, info->data->phy_offset, 1);
con1 = ADC_V2_CON1_SOFT_RESET;
writel(con1, ADC_V2_CON1(info->regs));
@@ -332,7 +339,7 @@ static void exynos_adc_v2_exit_hw(struct exynos_adc *info)
u32 con;
if (info->data->needs_adc_phy)
- writel(0, info->enable_reg);
+ regmap_write(info->pmu_map, info->data->phy_offset, 0);
con = readl(ADC_V2_CON1(info->regs));
con &= ~ADC_CON_EN_START;
@@ -362,6 +369,7 @@ static const struct exynos_adc_data exynos_adc_v2_data = {
.num_channels = MAX_ADC_V2_CHANNELS,
.mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
.needs_adc_phy = true,
+ .phy_offset = EXYNOS_ADCV2_PHY_OFFSET,
.init_hw = exynos_adc_v2_init_hw,
.exit_hw = exynos_adc_v2_exit_hw,
@@ -374,6 +382,7 @@ static const struct exynos_adc_data exynos3250_adc_data = {
.mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
.needs_sclk = true,
.needs_adc_phy = true,
+ .phy_offset = EXYNOS_ADCV1_PHY_OFFSET,
.init_hw = exynos_adc_v2_init_hw,
.exit_hw = exynos_adc_v2_exit_hw,
@@ -381,6 +390,35 @@ static const struct exynos_adc_data exynos3250_adc_data = {
.start_conv = exynos_adc_v2_start_conv,
};
+static void exynos_adc_exynos7_init_hw(struct exynos_adc *info)
+{
+ u32 con1, con2;
+
+ if (info->data->needs_adc_phy)
+ regmap_write(info->pmu_map, info->data->phy_offset, 1);
+
+ con1 = ADC_V2_CON1_SOFT_RESET;
+ writel(con1, ADC_V2_CON1(info->regs));
+
+ con2 = readl(ADC_V2_CON2(info->regs));
+ con2 &= ~ADC_V2_CON2_C_TIME(7);
+ con2 |= ADC_V2_CON2_C_TIME(0);
+ writel(con2, ADC_V2_CON2(info->regs));
+
+ /* Enable interrupts */
+ writel(1, ADC_V2_INT_EN(info->regs));
+}
+
+static const struct exynos_adc_data exynos7_adc_data = {
+ .num_channels = MAX_ADC_V1_CHANNELS,
+ .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
+
+ .init_hw = exynos_adc_exynos7_init_hw,
+ .exit_hw = exynos_adc_v2_exit_hw,
+ .clear_irq = exynos_adc_v2_clear_irq,
+ .start_conv = exynos_adc_v2_start_conv,
+};
+
static const struct of_device_id exynos_adc_match[] = {
{
.compatible = "samsung,s3c2410-adc",
@@ -406,6 +444,9 @@ static const struct of_device_id exynos_adc_match[] = {
}, {
.compatible = "samsung,exynos3250-adc",
.data = &exynos3250_adc_data,
+ }, {
+ .compatible = "samsung,exynos7-adc",
+ .data = &exynos7_adc_data,
},
{},
};
@@ -558,10 +599,13 @@ static int exynos_adc_probe(struct platform_device *pdev)
if (info->data->needs_adc_phy) {
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- info->enable_reg = devm_ioremap_resource(&pdev->dev, mem);
- if (IS_ERR(info->enable_reg))
- return PTR_ERR(info->enable_reg);
+ info->pmu_map = syscon_regmap_lookup_by_phandle(
+ pdev->dev.of_node,
+ "samsung,syscon-phandle");
+ if (IS_ERR(info->pmu_map)) {
+ dev_err(&pdev->dev, "syscon regmap lookup failed.\n");
+ return PTR_ERR(info->pmu_map);
+ }
}
irq = platform_get_irq(pdev, 0);
diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c
index 28a086e48776..efbfd12a4bfd 100644
--- a/drivers/iio/adc/mcp320x.c
+++ b/drivers/iio/adc/mcp320x.c
@@ -1,9 +1,30 @@
/*
* Copyright (C) 2013 Oskar Andero <oskar.andero@gmail.com>
+ * Copyright (C) 2014 Rose Technology
+ * Allan Bendorff Jensen <abj@rosetechnology.dk>
+ * Soren Andersen <san@rosetechnology.dk>
+ *
+ * Driver for following ADC chips from Microchip Technology's:
+ * 10 Bit converter
+ * MCP3001
+ * MCP3002
+ * MCP3004
+ * MCP3008
+ * ------------
+ * 12 bit converter
+ * MCP3201
+ * MCP3202
+ * MCP3204
+ * MCP3208
+ * ------------
*
- * Driver for Microchip Technology's MCP3204 and MCP3208 ADC chips.
* Datasheet can be found here:
- * http://ww1.microchip.com/downloads/en/devicedoc/21298c.pdf
+ * http://ww1.microchip.com/downloads/en/DeviceDoc/21293C.pdf mcp3001
+ * http://ww1.microchip.com/downloads/en/DeviceDoc/21294E.pdf mcp3002
+ * http://ww1.microchip.com/downloads/en/DeviceDoc/21295d.pdf mcp3004/08
+ * http://ww1.microchip.com/downloads/en/DeviceDoc/21290D.pdf mcp3201
+ * http://ww1.microchip.com/downloads/en/DeviceDoc/21034D.pdf mcp3202
+ * http://ww1.microchip.com/downloads/en/DeviceDoc/21298c.pdf mcp3204/08
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -11,19 +32,29 @@
*/
#include <linux/err.h>
+#include <linux/delay.h>
#include <linux/spi/spi.h>
#include <linux/module.h>
#include <linux/iio/iio.h>
#include <linux/regulator/consumer.h>
-#define MCP_SINGLE_ENDED (1 << 3)
-#define MCP_START_BIT (1 << 4)
-
enum {
+ mcp3001,
+ mcp3002,
+ mcp3004,
+ mcp3008,
+ mcp3201,
+ mcp3202,
mcp3204,
mcp3208,
};
+struct mcp320x_chip_info {
+ const struct iio_chan_spec *channels;
+ unsigned int num_channels;
+ unsigned int resolution;
+};
+
struct mcp320x {
struct spi_device *spi;
struct spi_message msg;
@@ -34,19 +65,69 @@ struct mcp320x {
struct regulator *reg;
struct mutex lock;
+ const struct mcp320x_chip_info *chip_info;
};
-static int mcp320x_adc_conversion(struct mcp320x *adc, u8 msg)
+static int mcp320x_channel_to_tx_data(int device_index,
+ const unsigned int channel, bool differential)
+{
+ int start_bit = 1;
+
+ switch (device_index) {
+ case mcp3001:
+ case mcp3201:
+ return 0;
+ case mcp3002:
+ case mcp3202:
+ return ((start_bit << 4) | (!differential << 3) |
+ (channel << 2));
+ case mcp3004:
+ case mcp3204:
+ case mcp3008:
+ case mcp3208:
+ return ((start_bit << 6) | (!differential << 5) |
+ (channel << 2));
+ default:
+ return -EINVAL;
+ }
+}
+
+static int mcp320x_adc_conversion(struct mcp320x *adc, u8 channel,
+ bool differential, int device_index)
{
int ret;
- adc->tx_buf = msg;
- ret = spi_sync(adc->spi, &adc->msg);
- if (ret < 0)
- return ret;
+ adc->rx_buf[0] = 0;
+ adc->rx_buf[1] = 0;
+ adc->tx_buf = mcp320x_channel_to_tx_data(device_index,
+ channel, differential);
+
+ if (device_index != mcp3001 && device_index != mcp3201) {
+ ret = spi_sync(adc->spi, &adc->msg);
+ if (ret < 0)
+ return ret;
+ } else {
+ ret = spi_read(adc->spi, &adc->rx_buf, sizeof(adc->rx_buf));
+ if (ret < 0)
+ return ret;
+ }
- return ((adc->rx_buf[0] & 0x3f) << 6) |
- (adc->rx_buf[1] >> 2);
+ switch (device_index) {
+ case mcp3001:
+ return (adc->rx_buf[0] << 5 | adc->rx_buf[1] >> 3);
+ case mcp3002:
+ case mcp3004:
+ case mcp3008:
+ return (adc->rx_buf[0] << 2 | adc->rx_buf[1] >> 6);
+ case mcp3201:
+ return (adc->rx_buf[0] << 7 | adc->rx_buf[1] >> 1);
+ case mcp3202:
+ case mcp3204:
+ case mcp3208:
+ return (adc->rx_buf[0] << 4 | adc->rx_buf[1] >> 4);
+ default:
+ return -EINVAL;
+ }
}
static int mcp320x_read_raw(struct iio_dev *indio_dev,
@@ -55,18 +136,17 @@ static int mcp320x_read_raw(struct iio_dev *indio_dev,
{
struct mcp320x *adc = iio_priv(indio_dev);
int ret = -EINVAL;
+ int device_index = 0;
mutex_lock(&adc->lock);
+ device_index = spi_get_device_id(adc->spi)->driver_data;
+
switch (mask) {
case IIO_CHAN_INFO_RAW:
- if (channel->differential)
- ret = mcp320x_adc_conversion(adc,
- MCP_START_BIT | channel->address);
- else
- ret = mcp320x_adc_conversion(adc,
- MCP_START_BIT | MCP_SINGLE_ENDED |
- channel->address);
+ ret = mcp320x_adc_conversion(adc, channel->address,
+ channel->differential, device_index);
+
if (ret < 0)
goto out;
@@ -75,18 +155,15 @@ static int mcp320x_read_raw(struct iio_dev *indio_dev,
break;
case IIO_CHAN_INFO_SCALE:
- /* Digital output code = (4096 * Vin) / Vref */
ret = regulator_get_voltage(adc->reg);
if (ret < 0)
goto out;
+ /* convert regulator output voltage to mV */
*val = ret / 1000;
- *val2 = 12;
+ *val2 = adc->chip_info->resolution;
ret = IIO_VAL_FRACTIONAL_LOG2;
break;
-
- default:
- break;
}
out:
@@ -117,6 +194,16 @@ out:
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \
}
+static const struct iio_chan_spec mcp3201_channels[] = {
+ MCP320X_VOLTAGE_CHANNEL_DIFF(0),
+};
+
+static const struct iio_chan_spec mcp3202_channels[] = {
+ MCP320X_VOLTAGE_CHANNEL(0),
+ MCP320X_VOLTAGE_CHANNEL(1),
+ MCP320X_VOLTAGE_CHANNEL_DIFF(0),
+};
+
static const struct iio_chan_spec mcp3204_channels[] = {
MCP320X_VOLTAGE_CHANNEL(0),
MCP320X_VOLTAGE_CHANNEL(1),
@@ -146,19 +233,46 @@ static const struct iio_info mcp320x_info = {
.driver_module = THIS_MODULE,
};
-struct mcp3208_chip_info {
- const struct iio_chan_spec *channels;
- unsigned int num_channels;
-};
-
-static const struct mcp3208_chip_info mcp3208_chip_infos[] = {
+static const struct mcp320x_chip_info mcp320x_chip_infos[] = {
+ [mcp3001] = {
+ .channels = mcp3201_channels,
+ .num_channels = ARRAY_SIZE(mcp3201_channels),
+ .resolution = 10
+ },
+ [mcp3002] = {
+ .channels = mcp3202_channels,
+ .num_channels = ARRAY_SIZE(mcp3202_channels),
+ .resolution = 10
+ },
+ [mcp3004] = {
+ .channels = mcp3204_channels,
+ .num_channels = ARRAY_SIZE(mcp3204_channels),
+ .resolution = 10
+ },
+ [mcp3008] = {
+ .channels = mcp3208_channels,
+ .num_channels = ARRAY_SIZE(mcp3208_channels),
+ .resolution = 10
+ },
+ [mcp3201] = {
+ .channels = mcp3201_channels,
+ .num_channels = ARRAY_SIZE(mcp3201_channels),
+ .resolution = 12
+ },
+ [mcp3202] = {
+ .channels = mcp3202_channels,
+ .num_channels = ARRAY_SIZE(mcp3202_channels),
+ .resolution = 12
+ },
[mcp3204] = {
.channels = mcp3204_channels,
- .num_channels = ARRAY_SIZE(mcp3204_channels)
+ .num_channels = ARRAY_SIZE(mcp3204_channels),
+ .resolution = 12
},
[mcp3208] = {
.channels = mcp3208_channels,
- .num_channels = ARRAY_SIZE(mcp3208_channels)
+ .num_channels = ARRAY_SIZE(mcp3208_channels),
+ .resolution = 12
},
};
@@ -166,7 +280,7 @@ static int mcp320x_probe(struct spi_device *spi)
{
struct iio_dev *indio_dev;
struct mcp320x *adc;
- const struct mcp3208_chip_info *chip_info;
+ const struct mcp320x_chip_info *chip_info;
int ret;
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
@@ -181,7 +295,7 @@ static int mcp320x_probe(struct spi_device *spi)
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &mcp320x_info;
- chip_info = &mcp3208_chip_infos[spi_get_device_id(spi)->driver_data];
+ chip_info = &mcp320x_chip_infos[spi_get_device_id(spi)->driver_data];
indio_dev->channels = chip_info->channels;
indio_dev->num_channels = chip_info->num_channels;
@@ -226,7 +340,45 @@ static int mcp320x_remove(struct spi_device *spi)
return 0;
}
+#if defined(CONFIG_OF)
+static const struct of_device_id mcp320x_dt_ids[] = {
+ {
+ .compatible = "mcp3001",
+ .data = &mcp320x_chip_infos[mcp3001],
+ }, {
+ .compatible = "mcp3002",
+ .data = &mcp320x_chip_infos[mcp3002],
+ }, {
+ .compatible = "mcp3004",
+ .data = &mcp320x_chip_infos[mcp3004],
+ }, {
+ .compatible = "mcp3008",
+ .data = &mcp320x_chip_infos[mcp3008],
+ }, {
+ .compatible = "mcp3201",
+ .data = &mcp320x_chip_infos[mcp3201],
+ }, {
+ .compatible = "mcp3202",
+ .data = &mcp320x_chip_infos[mcp3202],
+ }, {
+ .compatible = "mcp3204",
+ .data = &mcp320x_chip_infos[mcp3204],
+ }, {
+ .compatible = "mcp3208",
+ .data = &mcp320x_chip_infos[mcp3208],
+ }, {
+ }
+};
+MODULE_DEVICE_TABLE(of, mcp320x_dt_ids);
+#endif
+
static const struct spi_device_id mcp320x_id[] = {
+ { "mcp3001", mcp3001 },
+ { "mcp3002", mcp3002 },
+ { "mcp3004", mcp3004 },
+ { "mcp3008", mcp3008 },
+ { "mcp3201", mcp3201 },
+ { "mcp3202", mcp3202 },
{ "mcp3204", mcp3204 },
{ "mcp3208", mcp3208 },
{ }
@@ -245,5 +397,5 @@ static struct spi_driver mcp320x_driver = {
module_spi_driver(mcp320x_driver);
MODULE_AUTHOR("Oskar Andero <oskar.andero@gmail.com>");
-MODULE_DESCRIPTION("Microchip Technology MCP3204/08");
+MODULE_DESCRIPTION("Microchip Technology MCP3x01/02/04/08");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/qcom-spmi-iadc.c b/drivers/iio/adc/qcom-spmi-iadc.c
new file mode 100644
index 000000000000..b9666f2f5e51
--- /dev/null
+++ b/drivers/iio/adc/qcom-spmi-iadc.c
@@ -0,0 +1,595 @@
+/*
+ * Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/iio/iio.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+/* IADC register and bit definition */
+#define IADC_REVISION2 0x1
+#define IADC_REVISION2_SUPPORTED_IADC 1
+
+#define IADC_PERPH_TYPE 0x4
+#define IADC_PERPH_TYPE_ADC 8
+
+#define IADC_PERPH_SUBTYPE 0x5
+#define IADC_PERPH_SUBTYPE_IADC 3
+
+#define IADC_STATUS1 0x8
+#define IADC_STATUS1_OP_MODE 4
+#define IADC_STATUS1_REQ_STS BIT(1)
+#define IADC_STATUS1_EOC BIT(0)
+#define IADC_STATUS1_REQ_STS_EOC_MASK 0x3
+
+#define IADC_MODE_CTL 0x40
+#define IADC_OP_MODE_SHIFT 3
+#define IADC_OP_MODE_NORMAL 0
+#define IADC_TRIM_EN BIT(0)
+
+#define IADC_EN_CTL1 0x46
+#define IADC_EN_CTL1_SET BIT(7)
+
+#define IADC_CH_SEL_CTL 0x48
+
+#define IADC_DIG_PARAM 0x50
+#define IADC_DIG_DEC_RATIO_SEL_SHIFT 2
+
+#define IADC_HW_SETTLE_DELAY 0x51
+
+#define IADC_CONV_REQ 0x52
+#define IADC_CONV_REQ_SET BIT(7)
+
+#define IADC_FAST_AVG_CTL 0x5a
+#define IADC_FAST_AVG_EN 0x5b
+#define IADC_FAST_AVG_EN_SET BIT(7)
+
+#define IADC_PERH_RESET_CTL3 0xda
+#define IADC_FOLLOW_WARM_RB BIT(2)
+
+#define IADC_DATA 0x60 /* 16 bits */
+
+#define IADC_SEC_ACCESS 0xd0
+#define IADC_SEC_ACCESS_DATA 0xa5
+
+#define IADC_NOMINAL_RSENSE 0xf4
+#define IADC_NOMINAL_RSENSE_SIGN_MASK BIT(7)
+
+#define IADC_REF_GAIN_MICRO_VOLTS 17857
+
+#define IADC_INT_RSENSE_DEVIATION 15625 /* nano Ohms per bit */
+
+#define IADC_INT_RSENSE_IDEAL_VALUE 10000 /* micro Ohms */
+#define IADC_INT_RSENSE_DEFAULT_VALUE 7800 /* micro Ohms */
+#define IADC_INT_RSENSE_DEFAULT_GF 9000 /* micro Ohms */
+#define IADC_INT_RSENSE_DEFAULT_SMIC 9700 /* micro Ohms */
+
+#define IADC_CONV_TIME_MIN_US 2000
+#define IADC_CONV_TIME_MAX_US 2100
+
+#define IADC_DEF_PRESCALING 0 /* 1:1 */
+#define IADC_DEF_DECIMATION 0 /* 512 */
+#define IADC_DEF_HW_SETTLE_TIME 0 /* 0 us */
+#define IADC_DEF_AVG_SAMPLES 0 /* 1 sample */
+
+/* IADC channel list */
+#define IADC_INT_RSENSE 0
+#define IADC_EXT_RSENSE 1
+#define IADC_GAIN_17P857MV 3
+#define IADC_EXT_OFFSET_CSP_CSN 5
+#define IADC_INT_OFFSET_CSP2_CSN2 6
+
+/**
+ * struct iadc_chip - IADC Current ADC device structure.
+ * @regmap: regmap for register read/write.
+ * @dev: This device pointer.
+ * @base: base offset for the ADC peripheral.
+ * @rsense: Values of the internal and external sense resister in micro Ohms.
+ * @poll_eoc: Poll for end of conversion instead of waiting for IRQ.
+ * @offset: Raw offset values for the internal and external channels.
+ * @gain: Raw gain of the channels.
+ * @lock: ADC lock for access to the peripheral.
+ * @complete: ADC notification after end of conversion interrupt is received.
+ */
+struct iadc_chip {
+ struct regmap *regmap;
+ struct device *dev;
+ u16 base;
+ bool poll_eoc;
+ u32 rsense[2];
+ u16 offset[2];
+ u16 gain;
+ struct mutex lock;
+ struct completion complete;
+};
+
+static int iadc_read(struct iadc_chip *iadc, u16 offset, u8 *data)
+{
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(iadc->regmap, iadc->base + offset, &val);
+ if (ret < 0)
+ return ret;
+
+ *data = val;
+ return 0;
+}
+
+static int iadc_write(struct iadc_chip *iadc, u16 offset, u8 data)
+{
+ return regmap_write(iadc->regmap, iadc->base + offset, data);
+}
+
+static int iadc_reset(struct iadc_chip *iadc)
+{
+ u8 data;
+ int ret;
+
+ ret = iadc_write(iadc, IADC_SEC_ACCESS, IADC_SEC_ACCESS_DATA);
+ if (ret < 0)
+ return ret;
+
+ ret = iadc_read(iadc, IADC_PERH_RESET_CTL3, &data);
+ if (ret < 0)
+ return ret;
+
+ ret = iadc_write(iadc, IADC_SEC_ACCESS, IADC_SEC_ACCESS_DATA);
+ if (ret < 0)
+ return ret;
+
+ data |= IADC_FOLLOW_WARM_RB;
+
+ return iadc_write(iadc, IADC_PERH_RESET_CTL3, data);
+}
+
+static int iadc_set_state(struct iadc_chip *iadc, bool state)
+{
+ return iadc_write(iadc, IADC_EN_CTL1, state ? IADC_EN_CTL1_SET : 0);
+}
+
+static void iadc_status_show(struct iadc_chip *iadc)
+{
+ u8 mode, sta1, chan, dig, en, req;
+ int ret;
+
+ ret = iadc_read(iadc, IADC_MODE_CTL, &mode);
+ if (ret < 0)
+ return;
+
+ ret = iadc_read(iadc, IADC_DIG_PARAM, &dig);
+ if (ret < 0)
+ return;
+
+ ret = iadc_read(iadc, IADC_CH_SEL_CTL, &chan);
+ if (ret < 0)
+ return;
+
+ ret = iadc_read(iadc, IADC_CONV_REQ, &req);
+ if (ret < 0)
+ return;
+
+ ret = iadc_read(iadc, IADC_STATUS1, &sta1);
+ if (ret < 0)
+ return;
+
+ ret = iadc_read(iadc, IADC_EN_CTL1, &en);
+ if (ret < 0)
+ return;
+
+ dev_err(iadc->dev,
+ "mode:%02x en:%02x chan:%02x dig:%02x req:%02x sta1:%02x\n",
+ mode, en, chan, dig, req, sta1);
+}
+
+static int iadc_configure(struct iadc_chip *iadc, int channel)
+{
+ u8 decim, mode;
+ int ret;
+
+ /* Mode selection */
+ mode = (IADC_OP_MODE_NORMAL << IADC_OP_MODE_SHIFT) | IADC_TRIM_EN;
+ ret = iadc_write(iadc, IADC_MODE_CTL, mode);
+ if (ret < 0)
+ return ret;
+
+ /* Channel selection */
+ ret = iadc_write(iadc, IADC_CH_SEL_CTL, channel);
+ if (ret < 0)
+ return ret;
+
+ /* Digital parameter setup */
+ decim = IADC_DEF_DECIMATION << IADC_DIG_DEC_RATIO_SEL_SHIFT;
+ ret = iadc_write(iadc, IADC_DIG_PARAM, decim);
+ if (ret < 0)
+ return ret;
+
+ /* HW settle time delay */
+ ret = iadc_write(iadc, IADC_HW_SETTLE_DELAY, IADC_DEF_HW_SETTLE_TIME);
+ if (ret < 0)
+ return ret;
+
+ ret = iadc_write(iadc, IADC_FAST_AVG_CTL, IADC_DEF_AVG_SAMPLES);
+ if (ret < 0)
+ return ret;
+
+ if (IADC_DEF_AVG_SAMPLES)
+ ret = iadc_write(iadc, IADC_FAST_AVG_EN, IADC_FAST_AVG_EN_SET);
+ else
+ ret = iadc_write(iadc, IADC_FAST_AVG_EN, 0);
+
+ if (ret < 0)
+ return ret;
+
+ if (!iadc->poll_eoc)
+ reinit_completion(&iadc->complete);
+
+ ret = iadc_set_state(iadc, true);
+ if (ret < 0)
+ return ret;
+
+ /* Request conversion */
+ return iadc_write(iadc, IADC_CONV_REQ, IADC_CONV_REQ_SET);
+}
+
+static int iadc_poll_wait_eoc(struct iadc_chip *iadc, unsigned int interval_us)
+{
+ unsigned int count, retry;
+ int ret;
+ u8 sta1;
+
+ retry = interval_us / IADC_CONV_TIME_MIN_US;
+
+ for (count = 0; count < retry; count++) {
+ ret = iadc_read(iadc, IADC_STATUS1, &sta1);
+ if (ret < 0)
+ return ret;
+
+ sta1 &= IADC_STATUS1_REQ_STS_EOC_MASK;
+ if (sta1 == IADC_STATUS1_EOC)
+ return 0;
+
+ usleep_range(IADC_CONV_TIME_MIN_US, IADC_CONV_TIME_MAX_US);
+ }
+
+ iadc_status_show(iadc);
+
+ return -ETIMEDOUT;
+}
+
+static int iadc_read_result(struct iadc_chip *iadc, u16 *data)
+{
+ return regmap_bulk_read(iadc->regmap, iadc->base + IADC_DATA, data, 2);
+}
+
+static int iadc_do_conversion(struct iadc_chip *iadc, int chan, u16 *data)
+{
+ unsigned int wait;
+ int ret;
+
+ ret = iadc_configure(iadc, chan);
+ if (ret < 0)
+ goto exit;
+
+ wait = BIT(IADC_DEF_AVG_SAMPLES) * IADC_CONV_TIME_MIN_US * 2;
+
+ if (iadc->poll_eoc) {
+ ret = iadc_poll_wait_eoc(iadc, wait);
+ } else {
+ ret = wait_for_completion_timeout(&iadc->complete, wait);
+ if (!ret)
+ ret = -ETIMEDOUT;
+ else
+ /* double check conversion status */
+ ret = iadc_poll_wait_eoc(iadc, IADC_CONV_TIME_MIN_US);
+ }
+
+ if (!ret)
+ ret = iadc_read_result(iadc, data);
+exit:
+ iadc_set_state(iadc, false);
+ if (ret < 0)
+ dev_err(iadc->dev, "conversion failed\n");
+
+ return ret;
+}
+
+static int iadc_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct iadc_chip *iadc = iio_priv(indio_dev);
+ s32 isense_ua, vsense_uv;
+ u16 adc_raw, vsense_raw;
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&iadc->lock);
+ ret = iadc_do_conversion(iadc, chan->channel, &adc_raw);
+ mutex_unlock(&iadc->lock);
+ if (ret < 0)
+ return ret;
+
+ vsense_raw = adc_raw - iadc->offset[chan->channel];
+
+ vsense_uv = vsense_raw * IADC_REF_GAIN_MICRO_VOLTS;
+ vsense_uv /= (s32)iadc->gain - iadc->offset[chan->channel];
+
+ isense_ua = vsense_uv / iadc->rsense[chan->channel];
+
+ dev_dbg(iadc->dev, "off %d gain %d adc %d %duV I %duA\n",
+ iadc->offset[chan->channel], iadc->gain,
+ adc_raw, vsense_uv, isense_ua);
+
+ *val = isense_ua;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ *val2 = 1000;
+ return IIO_VAL_INT_PLUS_MICRO;
+ }
+
+ return -EINVAL;
+}
+
+static const struct iio_info iadc_info = {
+ .read_raw = iadc_read_raw,
+ .driver_module = THIS_MODULE,
+};
+
+static irqreturn_t iadc_isr(int irq, void *dev_id)
+{
+ struct iadc_chip *iadc = dev_id;
+
+ complete(&iadc->complete);
+
+ return IRQ_HANDLED;
+}
+
+static int iadc_update_offset(struct iadc_chip *iadc)
+{
+ int ret;
+
+ ret = iadc_do_conversion(iadc, IADC_GAIN_17P857MV, &iadc->gain);
+ if (ret < 0)
+ return ret;
+
+ ret = iadc_do_conversion(iadc, IADC_INT_OFFSET_CSP2_CSN2,
+ &iadc->offset[IADC_INT_RSENSE]);
+ if (ret < 0)
+ return ret;
+
+ if (iadc->gain == iadc->offset[IADC_INT_RSENSE]) {
+ dev_err(iadc->dev, "error: internal offset == gain %d\n",
+ iadc->gain);
+ return -EINVAL;
+ }
+
+ ret = iadc_do_conversion(iadc, IADC_EXT_OFFSET_CSP_CSN,
+ &iadc->offset[IADC_EXT_RSENSE]);
+ if (ret < 0)
+ return ret;
+
+ if (iadc->gain == iadc->offset[IADC_EXT_RSENSE]) {
+ dev_err(iadc->dev, "error: external offset == gain %d\n",
+ iadc->gain);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int iadc_version_check(struct iadc_chip *iadc)
+{
+ u8 val;
+ int ret;
+
+ ret = iadc_read(iadc, IADC_PERPH_TYPE, &val);
+ if (ret < 0)
+ return ret;
+
+ if (val < IADC_PERPH_TYPE_ADC) {
+ dev_err(iadc->dev, "%d is not ADC\n", val);
+ return -EINVAL;
+ }
+
+ ret = iadc_read(iadc, IADC_PERPH_SUBTYPE, &val);
+ if (ret < 0)
+ return ret;
+
+ if (val < IADC_PERPH_SUBTYPE_IADC) {
+ dev_err(iadc->dev, "%d is not IADC\n", val);
+ return -EINVAL;
+ }
+
+ ret = iadc_read(iadc, IADC_REVISION2, &val);
+ if (ret < 0)
+ return ret;
+
+ if (val < IADC_REVISION2_SUPPORTED_IADC) {
+ dev_err(iadc->dev, "revision %d not supported\n", val);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int iadc_rsense_read(struct iadc_chip *iadc, struct device_node *node)
+{
+ int ret, sign, int_sense;
+ u8 deviation;
+
+ ret = of_property_read_u32(node, "qcom,external-resistor-micro-ohms",
+ &iadc->rsense[IADC_EXT_RSENSE]);
+ if (ret < 0)
+ iadc->rsense[IADC_EXT_RSENSE] = IADC_INT_RSENSE_IDEAL_VALUE;
+
+ if (!iadc->rsense[IADC_EXT_RSENSE]) {
+ dev_err(iadc->dev, "external resistor can't be zero Ohms");
+ return -EINVAL;
+ }
+
+ ret = iadc_read(iadc, IADC_NOMINAL_RSENSE, &deviation);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Deviation value stored is an offset from 10 mili Ohms, bit 7 is
+ * the sign, the remaining bits have an LSB of 15625 nano Ohms.
+ */
+ sign = (deviation & IADC_NOMINAL_RSENSE_SIGN_MASK) ? -1 : 1;
+
+ deviation &= ~IADC_NOMINAL_RSENSE_SIGN_MASK;
+
+ /* Scale it to nono Ohms */
+ int_sense = IADC_INT_RSENSE_IDEAL_VALUE * 1000;
+ int_sense += sign * deviation * IADC_INT_RSENSE_DEVIATION;
+ int_sense /= 1000; /* micro Ohms */
+
+ iadc->rsense[IADC_INT_RSENSE] = int_sense;
+ return 0;
+}
+
+static const struct iio_chan_spec iadc_channels[] = {
+ {
+ .type = IIO_CURRENT,
+ .datasheet_name = "INTERNAL_RSENSE",
+ .channel = 0,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ .indexed = 1,
+ },
+ {
+ .type = IIO_CURRENT,
+ .datasheet_name = "EXTERNAL_RSENSE",
+ .channel = 1,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ .indexed = 1,
+ },
+};
+
+static int iadc_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ struct iio_dev *indio_dev;
+ struct iadc_chip *iadc;
+ int ret, irq_eoc;
+ u32 res;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*iadc));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ iadc = iio_priv(indio_dev);
+ iadc->dev = dev;
+
+ iadc->regmap = dev_get_regmap(dev->parent, NULL);
+ if (!iadc->regmap)
+ return -ENODEV;
+
+ init_completion(&iadc->complete);
+ mutex_init(&iadc->lock);
+
+ ret = of_property_read_u32(node, "reg", &res);
+ if (ret < 0)
+ return -ENODEV;
+
+ iadc->base = res;
+
+ ret = iadc_version_check(iadc);
+ if (ret < 0)
+ return -ENODEV;
+
+ ret = iadc_rsense_read(iadc, node);
+ if (ret < 0)
+ return -ENODEV;
+
+ dev_dbg(iadc->dev, "sense resistors %d and %d micro Ohm\n",
+ iadc->rsense[IADC_INT_RSENSE],
+ iadc->rsense[IADC_EXT_RSENSE]);
+
+ irq_eoc = platform_get_irq(pdev, 0);
+ if (irq_eoc == -EPROBE_DEFER)
+ return irq_eoc;
+
+ if (irq_eoc < 0)
+ iadc->poll_eoc = true;
+
+ ret = iadc_reset(iadc);
+ if (ret < 0) {
+ dev_err(dev, "reset failed\n");
+ return ret;
+ }
+
+ if (!iadc->poll_eoc) {
+ ret = devm_request_irq(dev, irq_eoc, iadc_isr, 0,
+ "spmi-iadc", iadc);
+ if (!ret)
+ enable_irq_wake(irq_eoc);
+ else
+ return ret;
+ } else {
+ device_init_wakeup(iadc->dev, 1);
+ }
+
+ ret = iadc_update_offset(iadc);
+ if (ret < 0) {
+ dev_err(dev, "failed offset calibration\n");
+ return ret;
+ }
+
+ indio_dev->dev.parent = dev;
+ indio_dev->dev.of_node = node;
+ indio_dev->name = pdev->name;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &iadc_info;
+ indio_dev->channels = iadc_channels;
+ indio_dev->num_channels = ARRAY_SIZE(iadc_channels);
+
+ return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct of_device_id iadc_match_table[] = {
+ { .compatible = "qcom,spmi-iadc" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, iadc_match_table);
+
+static struct platform_driver iadc_driver = {
+ .driver = {
+ .name = "qcom-spmi-iadc",
+ .of_match_table = iadc_match_table,
+ },
+ .probe = iadc_probe,
+};
+
+module_platform_driver(iadc_driver);
+
+MODULE_ALIAS("platform:qcom-spmi-iadc");
+MODULE_DESCRIPTION("Qualcomm SPMI PMIC current ADC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");
diff --git a/drivers/iio/adc/rockchip_saradc.c b/drivers/iio/adc/rockchip_saradc.c
index e074a0b03f28..b546bc1a9c30 100644
--- a/drivers/iio/adc/rockchip_saradc.c
+++ b/drivers/iio/adc/rockchip_saradc.c
@@ -18,13 +18,13 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/regulator/consumer.h>
#include <linux/iio/iio.h>
#define SARADC_DATA 0x00
-#define SARADC_DATA_MASK 0x3ff
#define SARADC_STAS 0x04
#define SARADC_STAS_BUSY BIT(0)
@@ -38,15 +38,22 @@
#define SARADC_DLY_PU_SOC 0x0c
#define SARADC_DLY_PU_SOC_MASK 0x3f
-#define SARADC_BITS 10
#define SARADC_TIMEOUT msecs_to_jiffies(100)
+struct rockchip_saradc_data {
+ int num_bits;
+ const struct iio_chan_spec *channels;
+ int num_channels;
+ unsigned long clk_rate;
+};
+
struct rockchip_saradc {
void __iomem *regs;
struct clk *pclk;
struct clk *clk;
struct completion completion;
struct regulator *vref;
+ const struct rockchip_saradc_data *data;
u16 last_val;
};
@@ -90,7 +97,7 @@ static int rockchip_saradc_read_raw(struct iio_dev *indio_dev,
}
*val = ret / 1000;
- *val2 = SARADC_BITS;
+ *val2 = info->data->num_bits;
return IIO_VAL_FRACTIONAL_LOG2;
default:
return -EINVAL;
@@ -103,7 +110,7 @@ static irqreturn_t rockchip_saradc_isr(int irq, void *dev_id)
/* Read value */
info->last_val = readl_relaxed(info->regs + SARADC_DATA);
- info->last_val &= SARADC_DATA_MASK;
+ info->last_val &= GENMASK(info->data->num_bits - 1, 0);
/* Clear irq & power down adc */
writel_relaxed(0, info->regs + SARADC_CTRL);
@@ -133,12 +140,44 @@ static const struct iio_chan_spec rockchip_saradc_iio_channels[] = {
ADC_CHANNEL(2, "adc2"),
};
+static const struct rockchip_saradc_data saradc_data = {
+ .num_bits = 10,
+ .channels = rockchip_saradc_iio_channels,
+ .num_channels = ARRAY_SIZE(rockchip_saradc_iio_channels),
+ .clk_rate = 1000000,
+};
+
+static const struct iio_chan_spec rockchip_rk3066_tsadc_iio_channels[] = {
+ ADC_CHANNEL(0, "adc0"),
+ ADC_CHANNEL(1, "adc1"),
+};
+
+static const struct rockchip_saradc_data rk3066_tsadc_data = {
+ .num_bits = 12,
+ .channels = rockchip_rk3066_tsadc_iio_channels,
+ .num_channels = ARRAY_SIZE(rockchip_rk3066_tsadc_iio_channels),
+ .clk_rate = 50000,
+};
+
+static const struct of_device_id rockchip_saradc_match[] = {
+ {
+ .compatible = "rockchip,saradc",
+ .data = &saradc_data,
+ }, {
+ .compatible = "rockchip,rk3066-tsadc",
+ .data = &rk3066_tsadc_data,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, rockchip_saradc_match);
+
static int rockchip_saradc_probe(struct platform_device *pdev)
{
struct rockchip_saradc *info = NULL;
struct device_node *np = pdev->dev.of_node;
struct iio_dev *indio_dev = NULL;
struct resource *mem;
+ const struct of_device_id *match;
int ret;
int irq;
@@ -152,6 +191,9 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
}
info = iio_priv(indio_dev);
+ match = of_match_device(rockchip_saradc_match, &pdev->dev);
+ info->data = match->data;
+
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
info->regs = devm_ioremap_resource(&pdev->dev, mem);
if (IS_ERR(info->regs))
@@ -192,10 +234,10 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
}
/*
- * Use a default of 1MHz for the converter clock.
+ * Use a default value for the converter clock.
* This may become user-configurable in the future.
*/
- ret = clk_set_rate(info->clk, 1000000);
+ ret = clk_set_rate(info->clk, info->data->clk_rate);
if (ret < 0) {
dev_err(&pdev->dev, "failed to set adc clk rate, %d\n", ret);
return ret;
@@ -227,8 +269,8 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
indio_dev->info = &rockchip_saradc_iio_info;
indio_dev->modes = INDIO_DIRECT_MODE;
- indio_dev->channels = rockchip_saradc_iio_channels;
- indio_dev->num_channels = ARRAY_SIZE(rockchip_saradc_iio_channels);
+ indio_dev->channels = info->data->channels;
+ indio_dev->num_channels = info->data->num_channels;
ret = iio_device_register(indio_dev);
if (ret)
@@ -296,12 +338,6 @@ static int rockchip_saradc_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(rockchip_saradc_pm_ops,
rockchip_saradc_suspend, rockchip_saradc_resume);
-static const struct of_device_id rockchip_saradc_match[] = {
- { .compatible = "rockchip,saradc" },
- {},
-};
-MODULE_DEVICE_TABLE(of, rockchip_saradc_match);
-
static struct platform_driver rockchip_saradc_driver = {
.probe = rockchip_saradc_probe,
.remove = rockchip_saradc_remove,
diff --git a/drivers/iio/adc/vf610_adc.c b/drivers/iio/adc/vf610_adc.c
index 4a10ae97dbf2..8ec353c01d98 100644
--- a/drivers/iio/adc/vf610_adc.c
+++ b/drivers/iio/adc/vf610_adc.c
@@ -91,7 +91,7 @@
#define VF610_ADC_CAL 0x80
/* Other field define */
-#define VF610_ADC_ADCHC(x) ((x) & 0xF)
+#define VF610_ADC_ADCHC(x) ((x) & 0x1F)
#define VF610_ADC_AIEN (0x1 << 7)
#define VF610_ADC_CONV_DISABLE 0x1F
#define VF610_ADC_HS_COCO0 0x1
@@ -153,6 +153,12 @@ struct vf610_adc {
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
}
+#define VF610_ADC_TEMPERATURE_CHAN(_idx, _chan_type) { \
+ .type = (_chan_type), \
+ .channel = (_idx), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \
+}
+
static const struct iio_chan_spec vf610_adc_iio_channels[] = {
VF610_ADC_CHAN(0, IIO_VOLTAGE),
VF610_ADC_CHAN(1, IIO_VOLTAGE),
@@ -170,6 +176,7 @@ static const struct iio_chan_spec vf610_adc_iio_channels[] = {
VF610_ADC_CHAN(13, IIO_VOLTAGE),
VF610_ADC_CHAN(14, IIO_VOLTAGE),
VF610_ADC_CHAN(15, IIO_VOLTAGE),
+ VF610_ADC_TEMPERATURE_CHAN(26, IIO_TEMP),
/* sentinel */
};
@@ -451,6 +458,7 @@ static int vf610_read_raw(struct iio_dev *indio_dev,
switch (mask) {
case IIO_CHAN_INFO_RAW:
+ case IIO_CHAN_INFO_PROCESSED:
mutex_lock(&indio_dev->mlock);
reinit_completion(&info->completion);
@@ -468,7 +476,23 @@ static int vf610_read_raw(struct iio_dev *indio_dev,
return ret;
}
- *val = info->value;
+ switch (chan->type) {
+ case IIO_VOLTAGE:
+ *val = info->value;
+ break;
+ case IIO_TEMP:
+ /*
+ * Calculate in degree Celsius times 1000
+ * Using sensor slope of 1.84 mV/°C and
+ * V at 25°C of 696 mV
+ */
+ *val = 25000 - ((int)info->value - 864) * 1000000 / 1840;
+ break;
+ default:
+ mutex_unlock(&indio_dev->mlock);
+ return -EINVAL;
+ }
+
mutex_unlock(&indio_dev->mlock);
return IIO_VAL_INT;
@@ -569,9 +593,9 @@ static int vf610_adc_probe(struct platform_device *pdev)
return PTR_ERR(info->regs);
irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
+ if (irq < 0) {
dev_err(&pdev->dev, "no irq resource?\n");
- return -EINVAL;
+ return irq;
}
ret = devm_request_irq(info->dev, irq,
@@ -586,8 +610,7 @@ static int vf610_adc_probe(struct platform_device *pdev)
if (IS_ERR(info->clk)) {
dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
PTR_ERR(info->clk));
- ret = PTR_ERR(info->clk);
- return ret;
+ return PTR_ERR(info->clk);
}
info->vref = devm_regulator_get(&pdev->dev, "vref");
@@ -681,17 +704,19 @@ static int vf610_adc_resume(struct device *dev)
ret = clk_prepare_enable(info->clk);
if (ret)
- return ret;
+ goto disable_reg;
vf610_adc_hw_init(info);
return 0;
+
+disable_reg:
+ regulator_disable(info->vref);
+ return ret;
}
#endif
-static SIMPLE_DEV_PM_OPS(vf610_adc_pm_ops,
- vf610_adc_suspend,
- vf610_adc_resume);
+static SIMPLE_DEV_PM_OPS(vf610_adc_pm_ops, vf610_adc_suspend, vf610_adc_resume);
static struct platform_driver vf610_adc_driver = {
.probe = vf610_adc_probe,
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index 24cfe4e044f9..edd13d2b4121 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -44,18 +44,18 @@ st_sensors_write_data_with_mask_error:
return err;
}
-static int st_sensors_match_odr(struct st_sensors *sensor,
+static int st_sensors_match_odr(struct st_sensor_settings *sensor_settings,
unsigned int odr, struct st_sensor_odr_avl *odr_out)
{
int i, ret = -EINVAL;
for (i = 0; i < ST_SENSORS_ODR_LIST_MAX; i++) {
- if (sensor->odr.odr_avl[i].hz == 0)
+ if (sensor_settings->odr.odr_avl[i].hz == 0)
goto st_sensors_match_odr_error;
- if (sensor->odr.odr_avl[i].hz == odr) {
- odr_out->hz = sensor->odr.odr_avl[i].hz;
- odr_out->value = sensor->odr.odr_avl[i].value;
+ if (sensor_settings->odr.odr_avl[i].hz == odr) {
+ odr_out->hz = sensor_settings->odr.odr_avl[i].hz;
+ odr_out->value = sensor_settings->odr.odr_avl[i].value;
ret = 0;
break;
}
@@ -71,23 +71,26 @@ int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr)
struct st_sensor_odr_avl odr_out = {0, 0};
struct st_sensor_data *sdata = iio_priv(indio_dev);
- err = st_sensors_match_odr(sdata->sensor, odr, &odr_out);
+ err = st_sensors_match_odr(sdata->sensor_settings, odr, &odr_out);
if (err < 0)
goto st_sensors_match_odr_error;
- if ((sdata->sensor->odr.addr == sdata->sensor->pw.addr) &&
- (sdata->sensor->odr.mask == sdata->sensor->pw.mask)) {
+ if ((sdata->sensor_settings->odr.addr ==
+ sdata->sensor_settings->pw.addr) &&
+ (sdata->sensor_settings->odr.mask ==
+ sdata->sensor_settings->pw.mask)) {
if (sdata->enabled == true) {
err = st_sensors_write_data_with_mask(indio_dev,
- sdata->sensor->odr.addr,
- sdata->sensor->odr.mask,
+ sdata->sensor_settings->odr.addr,
+ sdata->sensor_settings->odr.mask,
odr_out.value);
} else {
err = 0;
}
} else {
err = st_sensors_write_data_with_mask(indio_dev,
- sdata->sensor->odr.addr, sdata->sensor->odr.mask,
+ sdata->sensor_settings->odr.addr,
+ sdata->sensor_settings->odr.mask,
odr_out.value);
}
if (err >= 0)
@@ -98,16 +101,16 @@ st_sensors_match_odr_error:
}
EXPORT_SYMBOL(st_sensors_set_odr);
-static int st_sensors_match_fs(struct st_sensors *sensor,
+static int st_sensors_match_fs(struct st_sensor_settings *sensor_settings,
unsigned int fs, int *index_fs_avl)
{
int i, ret = -EINVAL;
for (i = 0; i < ST_SENSORS_FULLSCALE_AVL_MAX; i++) {
- if (sensor->fs.fs_avl[i].num == 0)
+ if (sensor_settings->fs.fs_avl[i].num == 0)
goto st_sensors_match_odr_error;
- if (sensor->fs.fs_avl[i].num == fs) {
+ if (sensor_settings->fs.fs_avl[i].num == fs) {
*index_fs_avl = i;
ret = 0;
break;
@@ -118,25 +121,24 @@ st_sensors_match_odr_error:
return ret;
}
-static int st_sensors_set_fullscale(struct iio_dev *indio_dev,
- unsigned int fs)
+static int st_sensors_set_fullscale(struct iio_dev *indio_dev, unsigned int fs)
{
int err, i = 0;
struct st_sensor_data *sdata = iio_priv(indio_dev);
- err = st_sensors_match_fs(sdata->sensor, fs, &i);
+ err = st_sensors_match_fs(sdata->sensor_settings, fs, &i);
if (err < 0)
goto st_accel_set_fullscale_error;
err = st_sensors_write_data_with_mask(indio_dev,
- sdata->sensor->fs.addr,
- sdata->sensor->fs.mask,
- sdata->sensor->fs.fs_avl[i].value);
+ sdata->sensor_settings->fs.addr,
+ sdata->sensor_settings->fs.mask,
+ sdata->sensor_settings->fs.fs_avl[i].value);
if (err < 0)
goto st_accel_set_fullscale_error;
sdata->current_fullscale = (struct st_sensor_fullscale_avl *)
- &sdata->sensor->fs.fs_avl[i];
+ &sdata->sensor_settings->fs.fs_avl[i];
return err;
st_accel_set_fullscale_error:
@@ -153,10 +155,12 @@ int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable)
struct st_sensor_data *sdata = iio_priv(indio_dev);
if (enable) {
- tmp_value = sdata->sensor->pw.value_on;
- if ((sdata->sensor->odr.addr == sdata->sensor->pw.addr) &&
- (sdata->sensor->odr.mask == sdata->sensor->pw.mask)) {
- err = st_sensors_match_odr(sdata->sensor,
+ tmp_value = sdata->sensor_settings->pw.value_on;
+ if ((sdata->sensor_settings->odr.addr ==
+ sdata->sensor_settings->pw.addr) &&
+ (sdata->sensor_settings->odr.mask ==
+ sdata->sensor_settings->pw.mask)) {
+ err = st_sensors_match_odr(sdata->sensor_settings,
sdata->odr, &odr_out);
if (err < 0)
goto set_enable_error;
@@ -164,8 +168,8 @@ int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable)
found = true;
}
err = st_sensors_write_data_with_mask(indio_dev,
- sdata->sensor->pw.addr,
- sdata->sensor->pw.mask, tmp_value);
+ sdata->sensor_settings->pw.addr,
+ sdata->sensor_settings->pw.mask, tmp_value);
if (err < 0)
goto set_enable_error;
@@ -175,9 +179,9 @@ int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable)
sdata->odr = odr_out.hz;
} else {
err = st_sensors_write_data_with_mask(indio_dev,
- sdata->sensor->pw.addr,
- sdata->sensor->pw.mask,
- sdata->sensor->pw.value_off);
+ sdata->sensor_settings->pw.addr,
+ sdata->sensor_settings->pw.mask,
+ sdata->sensor_settings->pw.value_off);
if (err < 0)
goto set_enable_error;
@@ -194,8 +198,9 @@ int st_sensors_set_axis_enable(struct iio_dev *indio_dev, u8 axis_enable)
struct st_sensor_data *sdata = iio_priv(indio_dev);
return st_sensors_write_data_with_mask(indio_dev,
- sdata->sensor->enable_axis.addr,
- sdata->sensor->enable_axis.mask, axis_enable);
+ sdata->sensor_settings->enable_axis.addr,
+ sdata->sensor_settings->enable_axis.mask,
+ axis_enable);
}
EXPORT_SYMBOL(st_sensors_set_axis_enable);
@@ -236,13 +241,13 @@ void st_sensors_power_disable(struct iio_dev *indio_dev)
EXPORT_SYMBOL(st_sensors_power_disable);
static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
- struct st_sensors_platform_data *pdata)
+ struct st_sensors_platform_data *pdata)
{
struct st_sensor_data *sdata = iio_priv(indio_dev);
switch (pdata->drdy_int_pin) {
case 1:
- if (sdata->sensor->drdy_irq.mask_int1 == 0) {
+ if (sdata->sensor_settings->drdy_irq.mask_int1 == 0) {
dev_err(&indio_dev->dev,
"DRDY on INT1 not available.\n");
return -EINVAL;
@@ -250,7 +255,7 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
sdata->drdy_int_pin = 1;
break;
case 2:
- if (sdata->sensor->drdy_irq.mask_int2 == 0) {
+ if (sdata->sensor_settings->drdy_irq.mask_int2 == 0) {
dev_err(&indio_dev->dev,
"DRDY on INT2 not available.\n");
return -EINVAL;
@@ -318,7 +323,7 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev,
if (sdata->current_fullscale) {
err = st_sensors_set_fullscale(indio_dev,
- sdata->current_fullscale->num);
+ sdata->current_fullscale->num);
if (err < 0)
return err;
} else
@@ -330,7 +335,8 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev,
/* set BDU */
err = st_sensors_write_data_with_mask(indio_dev,
- sdata->sensor->bdu.addr, sdata->sensor->bdu.mask, true);
+ sdata->sensor_settings->bdu.addr,
+ sdata->sensor_settings->bdu.mask, true);
if (err < 0)
return err;
@@ -346,26 +352,28 @@ int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable)
u8 drdy_mask;
struct st_sensor_data *sdata = iio_priv(indio_dev);
- if (!sdata->sensor->drdy_irq.addr)
+ if (!sdata->sensor_settings->drdy_irq.addr)
return 0;
/* Enable/Disable the interrupt generator 1. */
- if (sdata->sensor->drdy_irq.ig1.en_addr > 0) {
+ if (sdata->sensor_settings->drdy_irq.ig1.en_addr > 0) {
err = st_sensors_write_data_with_mask(indio_dev,
- sdata->sensor->drdy_irq.ig1.en_addr,
- sdata->sensor->drdy_irq.ig1.en_mask, (int)enable);
+ sdata->sensor_settings->drdy_irq.ig1.en_addr,
+ sdata->sensor_settings->drdy_irq.ig1.en_mask,
+ (int)enable);
if (err < 0)
goto st_accel_set_dataready_irq_error;
}
if (sdata->drdy_int_pin == 1)
- drdy_mask = sdata->sensor->drdy_irq.mask_int1;
+ drdy_mask = sdata->sensor_settings->drdy_irq.mask_int1;
else
- drdy_mask = sdata->sensor->drdy_irq.mask_int2;
+ drdy_mask = sdata->sensor_settings->drdy_irq.mask_int2;
/* Enable/Disable the interrupt generator for data ready. */
err = st_sensors_write_data_with_mask(indio_dev,
- sdata->sensor->drdy_irq.addr, drdy_mask, (int)enable);
+ sdata->sensor_settings->drdy_irq.addr,
+ drdy_mask, (int)enable);
st_accel_set_dataready_irq_error:
return err;
@@ -378,8 +386,8 @@ int st_sensors_set_fullscale_by_gain(struct iio_dev *indio_dev, int scale)
struct st_sensor_data *sdata = iio_priv(indio_dev);
for (i = 0; i < ST_SENSORS_FULLSCALE_AVL_MAX; i++) {
- if ((sdata->sensor->fs.fs_avl[i].gain == scale) &&
- (sdata->sensor->fs.fs_avl[i].gain != 0)) {
+ if ((sdata->sensor_settings->fs.fs_avl[i].gain == scale) &&
+ (sdata->sensor_settings->fs.fs_avl[i].gain != 0)) {
err = 0;
break;
}
@@ -388,7 +396,7 @@ int st_sensors_set_fullscale_by_gain(struct iio_dev *indio_dev, int scale)
goto st_sensors_match_scale_error;
err = st_sensors_set_fullscale(indio_dev,
- sdata->sensor->fs.fs_avl[i].num);
+ sdata->sensor_settings->fs.fs_avl[i].num);
st_sensors_match_scale_error:
return err;
@@ -439,7 +447,7 @@ int st_sensors_read_info_raw(struct iio_dev *indio_dev,
if (err < 0)
goto out;
- msleep((sdata->sensor->bootime * 1000) / sdata->odr);
+ msleep((sdata->sensor_settings->bootime * 1000) / sdata->odr);
err = st_sensors_read_axis_data(indio_dev, ch, val);
if (err < 0)
goto out;
@@ -456,7 +464,8 @@ out:
EXPORT_SYMBOL(st_sensors_read_info_raw);
int st_sensors_check_device_support(struct iio_dev *indio_dev,
- int num_sensors_list, const struct st_sensors *sensors)
+ int num_sensors_list,
+ const struct st_sensor_settings *sensor_settings)
{
u8 wai;
int i, n, err;
@@ -470,23 +479,24 @@ int st_sensors_check_device_support(struct iio_dev *indio_dev,
}
for (i = 0; i < num_sensors_list; i++) {
- if (sensors[i].wai == wai)
+ if (sensor_settings[i].wai == wai)
break;
}
if (i == num_sensors_list)
goto device_not_supported;
- for (n = 0; n < ARRAY_SIZE(sensors[i].sensors_supported); n++) {
+ for (n = 0; n < ARRAY_SIZE(sensor_settings[i].sensors_supported); n++) {
if (strcmp(indio_dev->name,
- &sensors[i].sensors_supported[n][0]) == 0)
+ &sensor_settings[i].sensors_supported[n][0]) == 0)
break;
}
- if (n == ARRAY_SIZE(sensors[i].sensors_supported)) {
+ if (n == ARRAY_SIZE(sensor_settings[i].sensors_supported)) {
dev_err(&indio_dev->dev, "device name and WhoAmI mismatch.\n");
goto sensor_name_mismatch;
}
- sdata->sensor = (struct st_sensors *)&sensors[i];
+ sdata->sensor_settings =
+ (struct st_sensor_settings *)&sensor_settings[i];
return i;
@@ -508,11 +518,11 @@ ssize_t st_sensors_sysfs_sampling_frequency_avail(struct device *dev,
mutex_lock(&indio_dev->mlock);
for (i = 0; i < ST_SENSORS_ODR_LIST_MAX; i++) {
- if (sdata->sensor->odr.odr_avl[i].hz == 0)
+ if (sdata->sensor_settings->odr.odr_avl[i].hz == 0)
break;
len += scnprintf(buf + len, PAGE_SIZE - len, "%d ",
- sdata->sensor->odr.odr_avl[i].hz);
+ sdata->sensor_settings->odr.odr_avl[i].hz);
}
mutex_unlock(&indio_dev->mlock);
buf[len - 1] = '\n';
@@ -530,11 +540,11 @@ ssize_t st_sensors_sysfs_scale_avail(struct device *dev,
mutex_lock(&indio_dev->mlock);
for (i = 0; i < ST_SENSORS_FULLSCALE_AVL_MAX; i++) {
- if (sdata->sensor->fs.fs_avl[i].num == 0)
+ if (sdata->sensor_settings->fs.fs_avl[i].num == 0)
break;
len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ",
- sdata->sensor->fs.fs_avl[i].gain);
+ sdata->sensor_settings->fs.fs_avl[i].gain);
}
mutex_unlock(&indio_dev->mlock);
buf[len - 1] = '\n';
diff --git a/drivers/iio/common/st_sensors/st_sensors_i2c.c b/drivers/iio/common/st_sensors/st_sensors_i2c.c
index bb6f3085f57b..98cfee296d46 100644
--- a/drivers/iio/common/st_sensors/st_sensors_i2c.c
+++ b/drivers/iio/common/st_sensors/st_sensors_i2c.c
@@ -72,6 +72,7 @@ void st_sensors_i2c_configure(struct iio_dev *indio_dev,
indio_dev->dev.parent = &client->dev;
indio_dev->name = client->name;
+ sdata->dev = &client->dev;
sdata->tf = &st_sensors_tf_i2c;
sdata->get_irq_data_ready = st_sensors_i2c_get_irq;
}
diff --git a/drivers/iio/common/st_sensors/st_sensors_spi.c b/drivers/iio/common/st_sensors/st_sensors_spi.c
index 251baf6abc25..78a6a1ab3ece 100644
--- a/drivers/iio/common/st_sensors/st_sensors_spi.c
+++ b/drivers/iio/common/st_sensors/st_sensors_spi.c
@@ -111,6 +111,7 @@ void st_sensors_spi_configure(struct iio_dev *indio_dev,
indio_dev->dev.parent = &spi->dev;
indio_dev->name = spi->modalias;
+ sdata->dev = &spi->dev;
sdata->tf = &st_sensors_tf_spi;
sdata->get_irq_data_ready = st_sensors_spi_get_irq;
}
diff --git a/drivers/iio/gyro/st_gyro.h b/drivers/iio/gyro/st_gyro.h
index c197360c450b..5353d6328c54 100644
--- a/drivers/iio/gyro/st_gyro.h
+++ b/drivers/iio/gyro/st_gyro.h
@@ -30,8 +30,7 @@ static const struct st_sensors_platform_data gyro_pdata = {
.drdy_int_pin = 2,
};
-int st_gyro_common_probe(struct iio_dev *indio_dev,
- struct st_sensors_platform_data *pdata);
+int st_gyro_common_probe(struct iio_dev *indio_dev);
void st_gyro_common_remove(struct iio_dev *indio_dev);
#ifdef CONFIG_IIO_BUFFER
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index f156fc6c5c6c..f07a2336f7dc 100644
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -103,7 +103,7 @@ static const struct iio_chan_spec st_gyro_16bit_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(3)
};
-static const struct st_sensors st_gyro_sensors[] = {
+static const struct st_sensor_settings st_gyro_sensors_settings[] = {
{
.wai = ST_GYRO_1_WAI_EXP,
.sensors_supported = {
@@ -309,8 +309,7 @@ static const struct iio_trigger_ops st_gyro_trigger_ops = {
#define ST_GYRO_TRIGGER_OPS NULL
#endif
-int st_gyro_common_probe(struct iio_dev *indio_dev,
- struct st_sensors_platform_data *pdata)
+int st_gyro_common_probe(struct iio_dev *indio_dev)
{
struct st_sensor_data *gdata = iio_priv(indio_dev);
int irq = gdata->get_irq_data_ready(indio_dev);
@@ -322,20 +321,22 @@ int st_gyro_common_probe(struct iio_dev *indio_dev,
st_sensors_power_enable(indio_dev);
err = st_sensors_check_device_support(indio_dev,
- ARRAY_SIZE(st_gyro_sensors), st_gyro_sensors);
+ ARRAY_SIZE(st_gyro_sensors_settings),
+ st_gyro_sensors_settings);
if (err < 0)
return err;
gdata->num_data_channels = ST_GYRO_NUMBER_DATA_CHANNELS;
- gdata->multiread_bit = gdata->sensor->multi_read_bit;
- indio_dev->channels = gdata->sensor->ch;
+ gdata->multiread_bit = gdata->sensor_settings->multi_read_bit;
+ indio_dev->channels = gdata->sensor_settings->ch;
indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
gdata->current_fullscale = (struct st_sensor_fullscale_avl *)
- &gdata->sensor->fs.fs_avl[0];
- gdata->odr = gdata->sensor->odr.odr_avl[0].hz;
+ &gdata->sensor_settings->fs.fs_avl[0];
+ gdata->odr = gdata->sensor_settings->odr.odr_avl[0].hz;
- err = st_sensors_init_sensor(indio_dev, pdata);
+ err = st_sensors_init_sensor(indio_dev,
+ (struct st_sensors_platform_data *)&gyro_pdata);
if (err < 0)
return err;
diff --git a/drivers/iio/gyro/st_gyro_i2c.c b/drivers/iio/gyro/st_gyro_i2c.c
index 8fa0ad2ef4ef..64480b16c689 100644
--- a/drivers/iio/gyro/st_gyro_i2c.c
+++ b/drivers/iio/gyro/st_gyro_i2c.c
@@ -67,13 +67,11 @@ static int st_gyro_i2c_probe(struct i2c_client *client,
return -ENOMEM;
gdata = iio_priv(indio_dev);
- gdata->dev = &client->dev;
st_sensors_of_i2c_probe(client, st_gyro_of_match);
st_sensors_i2c_configure(indio_dev, client, gdata);
- err = st_gyro_common_probe(indio_dev,
- (struct st_sensors_platform_data *)&gyro_pdata);
+ err = st_gyro_common_probe(indio_dev);
if (err < 0)
return err;
diff --git a/drivers/iio/gyro/st_gyro_spi.c b/drivers/iio/gyro/st_gyro_spi.c
index b4ad3be26687..e59bead6bc3c 100644
--- a/drivers/iio/gyro/st_gyro_spi.c
+++ b/drivers/iio/gyro/st_gyro_spi.c
@@ -29,12 +29,10 @@ static int st_gyro_spi_probe(struct spi_device *spi)
return -ENOMEM;
gdata = iio_priv(indio_dev);
- gdata->dev = &spi->dev;
st_sensors_spi_configure(indio_dev, spi, gdata);
- err = st_gyro_common_probe(indio_dev,
- (struct st_sensors_platform_data *)&gyro_pdata);
+ err = st_gyro_common_probe(indio_dev);
if (err < 0)
return err;
diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig
index e116bd8dd0e4..4813b793b9f7 100644
--- a/drivers/iio/humidity/Kconfig
+++ b/drivers/iio/humidity/Kconfig
@@ -22,4 +22,14 @@ config SI7005
To compile this driver as a module, choose M here: the module
will be called si7005.
+config SI7020
+ tristate "Si7013/20/21 Relative Humidity and Temperature Sensors"
+ depends on I2C
+ help
+ Say yes here to build support for the Silicon Labs Si7013/20/21
+ Relative Humidity and Temperature Sensors.
+
+ To compile this driver as a module, choose M here: the module
+ will be called si7020.
+
endmenu
diff --git a/drivers/iio/humidity/Makefile b/drivers/iio/humidity/Makefile
index e3f3d942e646..86e2d26e9f4d 100644
--- a/drivers/iio/humidity/Makefile
+++ b/drivers/iio/humidity/Makefile
@@ -4,3 +4,4 @@
obj-$(CONFIG_DHT11) += dht11.o
obj-$(CONFIG_SI7005) += si7005.o
+obj-$(CONFIG_SI7020) += si7020.o
diff --git a/drivers/iio/humidity/si7020.c b/drivers/iio/humidity/si7020.c
new file mode 100644
index 000000000000..b54164677b89
--- /dev/null
+++ b/drivers/iio/humidity/si7020.c
@@ -0,0 +1,161 @@
+/*
+ * si7020.c - Silicon Labs Si7013/20/21 Relative Humidity and Temp Sensors
+ * Copyright (c) 2013,2014 Uplogix, Inc.
+ * David Barksdale <dbarksdale@uplogix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * The Silicon Labs Si7013/20/21 Relative Humidity and Temperature Sensors
+ * are i2c devices which have an identical programming interface for
+ * measuring relative humidity and temperature. The Si7013 has an additional
+ * temperature input which this driver does not support.
+ *
+ * Data Sheets:
+ * Si7013: http://www.silabs.com/Support%20Documents/TechnicalDocs/Si7013.pdf
+ * Si7020: http://www.silabs.com/Support%20Documents/TechnicalDocs/Si7020.pdf
+ * Si7021: http://www.silabs.com/Support%20Documents/TechnicalDocs/Si7021.pdf
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+/* Measure Relative Humidity, Hold Master Mode */
+#define SI7020CMD_RH_HOLD 0xE5
+/* Measure Temperature, Hold Master Mode */
+#define SI7020CMD_TEMP_HOLD 0xE3
+/* Software Reset */
+#define SI7020CMD_RESET 0xFE
+
+static int si7020_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ struct i2c_client *client = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = i2c_smbus_read_word_data(client,
+ chan->type == IIO_TEMP ?
+ SI7020CMD_TEMP_HOLD :
+ SI7020CMD_RH_HOLD);
+ if (ret < 0)
+ return ret;
+ *val = ret >> 2;
+ if (chan->type == IIO_HUMIDITYRELATIVE)
+ *val &= GENMASK(11, 0);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ if (chan->type == IIO_TEMP)
+ *val = 175720; /* = 175.72 * 1000 */
+ else
+ *val = 125 * 1000;
+ *val2 = 65536 >> 2;
+ return IIO_VAL_FRACTIONAL;
+ case IIO_CHAN_INFO_OFFSET:
+ /*
+ * Since iio_convert_raw_to_processed_unlocked assumes offset
+ * is an integer we have to round these values and lose
+ * accuracy.
+ * Relative humidity will be 0.0032959% too high and
+ * temperature will be 0.00277344 degrees too high.
+ * This is no big deal because it's within the accuracy of the
+ * sensor.
+ */
+ if (chan->type == IIO_TEMP)
+ *val = -4368; /* = -46.85 * (65536 >> 2) / 175.72 */
+ else
+ *val = -786; /* = -6 * (65536 >> 2) / 125 */
+ return IIO_VAL_INT;
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
+static const struct iio_chan_spec si7020_channels[] = {
+ {
+ .type = IIO_HUMIDITYRELATIVE,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET),
+ },
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET),
+ }
+};
+
+static const struct iio_info si7020_info = {
+ .read_raw = si7020_read_raw,
+ .driver_module = THIS_MODULE,
+};
+
+static int si7020_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct iio_dev *indio_dev;
+ struct i2c_client **data;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_WRITE_BYTE |
+ I2C_FUNC_SMBUS_READ_WORD_DATA))
+ return -ENODEV;
+
+ /* Reset device, loads default settings. */
+ ret = i2c_smbus_write_byte(client, SI7020CMD_RESET);
+ if (ret < 0)
+ return ret;
+ /* Wait the maximum power-up time after software reset. */
+ msleep(15);
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*client));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ *data = client;
+
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->name = dev_name(&client->dev);
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &si7020_info;
+ indio_dev->channels = si7020_channels;
+ indio_dev->num_channels = ARRAY_SIZE(si7020_channels);
+
+ return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct i2c_device_id si7020_id[] = {
+ { "si7020", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, si7020_id);
+
+static struct i2c_driver si7020_driver = {
+ .driver.name = "si7020",
+ .probe = si7020_probe,
+ .id_table = si7020_id,
+};
+
+module_i2c_driver(si7020_driver);
+MODULE_DESCRIPTION("Silicon Labs Si7013/20/21 Relative Humidity and Temperature Sensors");
+MODULE_AUTHOR("David Barksdale <dbarksdale@uplogix.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c
index f0846108d006..866fe904cba2 100644
--- a/drivers/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -100,6 +100,28 @@ static int iio_dev_node_match(struct device *dev, void *data)
return dev->of_node == data && dev->type == &iio_device_type;
}
+/**
+ * __of_iio_simple_xlate - translate iiospec to the IIO channel index
+ * @indio_dev: pointer to the iio_dev structure
+ * @iiospec: IIO specifier as found in the device tree
+ *
+ * This is simple translation function, suitable for the most 1:1 mapped
+ * channels in IIO chips. This function performs only one sanity check:
+ * whether IIO index is less than num_channels (that is specified in the
+ * iio_dev).
+ */
+static int __of_iio_simple_xlate(struct iio_dev *indio_dev,
+ const struct of_phandle_args *iiospec)
+{
+ if (!iiospec->args_count)
+ return 0;
+
+ if (iiospec->args[0] >= indio_dev->num_channels)
+ return -EINVAL;
+
+ return iiospec->args[0];
+}
+
static int __of_iio_channel_get(struct iio_channel *channel,
struct device_node *np, int index)
{
@@ -122,18 +144,19 @@ static int __of_iio_channel_get(struct iio_channel *channel,
indio_dev = dev_to_iio_dev(idev);
channel->indio_dev = indio_dev;
- index = iiospec.args_count ? iiospec.args[0] : 0;
- if (index >= indio_dev->num_channels) {
- err = -EINVAL;
+ if (indio_dev->info->of_xlate)
+ index = indio_dev->info->of_xlate(indio_dev, &iiospec);
+ else
+ index = __of_iio_simple_xlate(indio_dev, &iiospec);
+ if (index < 0)
goto err_put;
- }
channel->channel = &indio_dev->channels[index];
return 0;
err_put:
iio_device_put(indio_dev);
- return err;
+ return index;
}
static struct iio_channel *of_iio_channel_get(struct device_node *np, int index)
diff --git a/drivers/iio/magnetometer/st_magn.h b/drivers/iio/magnetometer/st_magn.h
index 694e33e0fb72..7e81d00ef0c3 100644
--- a/drivers/iio/magnetometer/st_magn.h
+++ b/drivers/iio/magnetometer/st_magn.h
@@ -18,8 +18,7 @@
#define LSM303DLM_MAGN_DEV_NAME "lsm303dlm_magn"
#define LIS3MDL_MAGN_DEV_NAME "lis3mdl"
-int st_magn_common_probe(struct iio_dev *indio_dev,
- struct st_sensors_platform_data *pdata);
+int st_magn_common_probe(struct iio_dev *indio_dev);
void st_magn_common_remove(struct iio_dev *indio_dev);
#ifdef CONFIG_IIO_BUFFER
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index 68cae86dbd29..8ade473f99fe 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -149,7 +149,7 @@ static const struct iio_chan_spec st_magn_2_16bit_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(3)
};
-static const struct st_sensors st_magn_sensors[] = {
+static const struct st_sensor_settings st_magn_sensors_settings[] = {
{
.wai = ST_MAGN_1_WAI_EXP,
.sensors_supported = {
@@ -361,8 +361,7 @@ static const struct iio_info magn_info = {
.write_raw = &st_magn_write_raw,
};
-int st_magn_common_probe(struct iio_dev *indio_dev,
- struct st_sensors_platform_data *pdata)
+int st_magn_common_probe(struct iio_dev *indio_dev)
{
struct st_sensor_data *mdata = iio_priv(indio_dev);
int irq = mdata->get_irq_data_ready(indio_dev);
@@ -374,20 +373,21 @@ int st_magn_common_probe(struct iio_dev *indio_dev,
st_sensors_power_enable(indio_dev);
err = st_sensors_check_device_support(indio_dev,
- ARRAY_SIZE(st_magn_sensors), st_magn_sensors);
+ ARRAY_SIZE(st_magn_sensors_settings),
+ st_magn_sensors_settings);
if (err < 0)
return err;
mdata->num_data_channels = ST_MAGN_NUMBER_DATA_CHANNELS;
- mdata->multiread_bit = mdata->sensor->multi_read_bit;
- indio_dev->channels = mdata->sensor->ch;
+ mdata->multiread_bit = mdata->sensor_settings->multi_read_bit;
+ indio_dev->channels = mdata->sensor_settings->ch;
indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
mdata->current_fullscale = (struct st_sensor_fullscale_avl *)
- &mdata->sensor->fs.fs_avl[0];
- mdata->odr = mdata->sensor->odr.odr_avl[0].hz;
+ &mdata->sensor_settings->fs.fs_avl[0];
+ mdata->odr = mdata->sensor_settings->odr.odr_avl[0].hz;
- err = st_sensors_init_sensor(indio_dev, pdata);
+ err = st_sensors_init_sensor(indio_dev, NULL);
if (err < 0)
return err;
diff --git a/drivers/iio/magnetometer/st_magn_i2c.c b/drivers/iio/magnetometer/st_magn_i2c.c
index 689250058442..92e5c15452a3 100644
--- a/drivers/iio/magnetometer/st_magn_i2c.c
+++ b/drivers/iio/magnetometer/st_magn_i2c.c
@@ -51,12 +51,11 @@ static int st_magn_i2c_probe(struct i2c_client *client,
return -ENOMEM;
mdata = iio_priv(indio_dev);
- mdata->dev = &client->dev;
st_sensors_of_i2c_probe(client, st_magn_of_match);
st_sensors_i2c_configure(indio_dev, client, mdata);
- err = st_magn_common_probe(indio_dev, NULL);
+ err = st_magn_common_probe(indio_dev);
if (err < 0)
return err;
diff --git a/drivers/iio/magnetometer/st_magn_spi.c b/drivers/iio/magnetometer/st_magn_spi.c
index a6143ea51dfc..7adacf160146 100644
--- a/drivers/iio/magnetometer/st_magn_spi.c
+++ b/drivers/iio/magnetometer/st_magn_spi.c
@@ -29,11 +29,10 @@ static int st_magn_spi_probe(struct spi_device *spi)
return -ENOMEM;
mdata = iio_priv(indio_dev);
- mdata->dev = &spi->dev;
st_sensors_spi_configure(indio_dev, spi, mdata);
- err = st_magn_common_probe(indio_dev, NULL);
+ err = st_magn_common_probe(indio_dev);
if (err < 0)
return err;
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index 15afbc919521..a3be53792072 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -5,6 +5,17 @@
menu "Pressure sensors"
+config BMP280
+ tristate "Bosch Sensortec BMP280 pressure sensor driver"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Say yes here to build support for Bosch Sensortec BMP280
+ pressure and temperature sensor.
+
+ To compile this driver as a module, choose M here: the module
+ will be called bmp280.
+
config HID_SENSOR_PRESS
depends on HID_SENSOR_HUB
select IIO_BUFFER
diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile
index 90a37e85cf21..88011f2ae00e 100644
--- a/drivers/iio/pressure/Makefile
+++ b/drivers/iio/pressure/Makefile
@@ -3,6 +3,7 @@
#
# When adding new entries keep the list in alphabetical order
+obj-$(CONFIG_BMP280) += bmp280.o
obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o
obj-$(CONFIG_MPL115) += mpl115.o
obj-$(CONFIG_MPL3115) += mpl3115.o
diff --git a/drivers/iio/pressure/bmp280.c b/drivers/iio/pressure/bmp280.c
new file mode 100644
index 000000000000..75038dacfff1
--- /dev/null
+++ b/drivers/iio/pressure/bmp280.c
@@ -0,0 +1,455 @@
+/*
+ * Copyright (c) 2014 Intel Corporation
+ *
+ * Driver for Bosch Sensortec BMP280 digital pressure sensor.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define pr_fmt(fmt) "bmp280: " fmt
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define BMP280_REG_TEMP_XLSB 0xFC
+#define BMP280_REG_TEMP_LSB 0xFB
+#define BMP280_REG_TEMP_MSB 0xFA
+#define BMP280_REG_PRESS_XLSB 0xF9
+#define BMP280_REG_PRESS_LSB 0xF8
+#define BMP280_REG_PRESS_MSB 0xF7
+
+#define BMP280_REG_CONFIG 0xF5
+#define BMP280_REG_CTRL_MEAS 0xF4
+#define BMP280_REG_STATUS 0xF3
+#define BMP280_REG_RESET 0xE0
+#define BMP280_REG_ID 0xD0
+
+#define BMP280_REG_COMP_TEMP_START 0x88
+#define BMP280_COMP_TEMP_REG_COUNT 6
+
+#define BMP280_REG_COMP_PRESS_START 0x8E
+#define BMP280_COMP_PRESS_REG_COUNT 18
+
+#define BMP280_FILTER_MASK (BIT(4) | BIT(3) | BIT(2))
+#define BMP280_FILTER_OFF 0
+#define BMP280_FILTER_2X BIT(2)
+#define BMP280_FILTER_4X BIT(3)
+#define BMP280_FILTER_8X (BIT(3) | BIT(2))
+#define BMP280_FILTER_16X BIT(4)
+
+#define BMP280_OSRS_TEMP_MASK (BIT(7) | BIT(6) | BIT(5))
+#define BMP280_OSRS_TEMP_SKIP 0
+#define BMP280_OSRS_TEMP_1X BIT(5)
+#define BMP280_OSRS_TEMP_2X BIT(6)
+#define BMP280_OSRS_TEMP_4X (BIT(6) | BIT(5))
+#define BMP280_OSRS_TEMP_8X BIT(7)
+#define BMP280_OSRS_TEMP_16X (BIT(7) | BIT(5))
+
+#define BMP280_OSRS_PRESS_MASK (BIT(4) | BIT(3) | BIT(2))
+#define BMP280_OSRS_PRESS_SKIP 0
+#define BMP280_OSRS_PRESS_1X BIT(2)
+#define BMP280_OSRS_PRESS_2X BIT(3)
+#define BMP280_OSRS_PRESS_4X (BIT(3) | BIT(2))
+#define BMP280_OSRS_PRESS_8X BIT(4)
+#define BMP280_OSRS_PRESS_16X (BIT(4) | BIT(2))
+
+#define BMP280_MODE_MASK (BIT(1) | BIT(0))
+#define BMP280_MODE_SLEEP 0
+#define BMP280_MODE_FORCED BIT(0)
+#define BMP280_MODE_NORMAL (BIT(1) | BIT(0))
+
+#define BMP280_CHIP_ID 0x58
+#define BMP280_SOFT_RESET_VAL 0xB6
+
+struct bmp280_data {
+ struct i2c_client *client;
+ struct mutex lock;
+ struct regmap *regmap;
+
+ /*
+ * Carryover value from temperature conversion, used in pressure
+ * calculation.
+ */
+ s32 t_fine;
+};
+
+/* Compensation parameters. */
+struct bmp280_comp_temp {
+ u16 dig_t1;
+ s16 dig_t2, dig_t3;
+};
+
+struct bmp280_comp_press {
+ u16 dig_p1;
+ s16 dig_p2, dig_p3, dig_p4, dig_p5, dig_p6, dig_p7, dig_p8, dig_p9;
+};
+
+static const struct iio_chan_spec bmp280_channels[] = {
+ {
+ .type = IIO_PRESSURE,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ },
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ },
+};
+
+static bool bmp280_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case BMP280_REG_CONFIG:
+ case BMP280_REG_CTRL_MEAS:
+ case BMP280_REG_RESET:
+ return true;
+ default:
+ return false;
+ };
+}
+
+static bool bmp280_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case BMP280_REG_TEMP_XLSB:
+ case BMP280_REG_TEMP_LSB:
+ case BMP280_REG_TEMP_MSB:
+ case BMP280_REG_PRESS_XLSB:
+ case BMP280_REG_PRESS_LSB:
+ case BMP280_REG_PRESS_MSB:
+ case BMP280_REG_STATUS:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config bmp280_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = BMP280_REG_TEMP_XLSB,
+ .cache_type = REGCACHE_RBTREE,
+
+ .writeable_reg = bmp280_is_writeable_reg,
+ .volatile_reg = bmp280_is_volatile_reg,
+};
+
+static int bmp280_read_compensation_temp(struct bmp280_data *data,
+ struct bmp280_comp_temp *comp)
+{
+ int ret;
+ __le16 buf[BMP280_COMP_TEMP_REG_COUNT / 2];
+
+ ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_TEMP_START,
+ buf, BMP280_COMP_TEMP_REG_COUNT);
+ if (ret < 0) {
+ dev_err(&data->client->dev,
+ "failed to read temperature calibration parameters\n");
+ return ret;
+ }
+
+ comp->dig_t1 = (u16) le16_to_cpu(buf[0]);
+ comp->dig_t2 = (s16) le16_to_cpu(buf[1]);
+ comp->dig_t3 = (s16) le16_to_cpu(buf[2]);
+
+ return 0;
+}
+
+static int bmp280_read_compensation_press(struct bmp280_data *data,
+ struct bmp280_comp_press *comp)
+{
+ int ret;
+ __le16 buf[BMP280_COMP_PRESS_REG_COUNT / 2];
+
+ ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_PRESS_START,
+ buf, BMP280_COMP_PRESS_REG_COUNT);
+ if (ret < 0) {
+ dev_err(&data->client->dev,
+ "failed to read pressure calibration parameters\n");
+ return ret;
+ }
+
+ comp->dig_p1 = (u16) le16_to_cpu(buf[0]);
+ comp->dig_p2 = (s16) le16_to_cpu(buf[1]);
+ comp->dig_p3 = (s16) le16_to_cpu(buf[2]);
+ comp->dig_p4 = (s16) le16_to_cpu(buf[3]);
+ comp->dig_p5 = (s16) le16_to_cpu(buf[4]);
+ comp->dig_p6 = (s16) le16_to_cpu(buf[5]);
+ comp->dig_p7 = (s16) le16_to_cpu(buf[6]);
+ comp->dig_p8 = (s16) le16_to_cpu(buf[7]);
+ comp->dig_p9 = (s16) le16_to_cpu(buf[8]);
+
+ return 0;
+}
+
+/*
+ * Returns temperature in DegC, resolution is 0.01 DegC. Output value of
+ * "5123" equals 51.23 DegC. t_fine carries fine temperature as global
+ * value.
+ *
+ * Taken from datasheet, Section 3.11.3, "Compensation formula".
+ */
+static s32 bmp280_compensate_temp(struct bmp280_data *data,
+ struct bmp280_comp_temp *comp,
+ s32 adc_temp)
+{
+ s32 var1, var2, t;
+
+ var1 = (((adc_temp >> 3) - ((s32) comp->dig_t1 << 1)) *
+ ((s32) comp->dig_t2)) >> 11;
+ var2 = (((((adc_temp >> 4) - ((s32) comp->dig_t1)) *
+ ((adc_temp >> 4) - ((s32) comp->dig_t1))) >> 12) *
+ ((s32) comp->dig_t3)) >> 14;
+
+ data->t_fine = var1 + var2;
+ t = (data->t_fine * 5 + 128) >> 8;
+
+ return t;
+}
+
+/*
+ * Returns pressure in Pa as unsigned 32 bit integer in Q24.8 format (24
+ * integer bits and 8 fractional bits). Output value of "24674867"
+ * represents 24674867/256 = 96386.2 Pa = 963.862 hPa
+ *
+ * Taken from datasheet, Section 3.11.3, "Compensation formula".
+ */
+static u32 bmp280_compensate_press(struct bmp280_data *data,
+ struct bmp280_comp_press *comp,
+ s32 adc_press)
+{
+ s64 var1, var2, p;
+
+ var1 = ((s64) data->t_fine) - 128000;
+ var2 = var1 * var1 * (s64) comp->dig_p6;
+ var2 = var2 + ((var1 * (s64) comp->dig_p5) << 17);
+ var2 = var2 + (((s64) comp->dig_p4) << 35);
+ var1 = ((var1 * var1 * (s64) comp->dig_p3) >> 8) +
+ ((var1 * (s64) comp->dig_p2) << 12);
+ var1 = (((((s64) 1) << 47) + var1)) * ((s64) comp->dig_p1) >> 33;
+
+ if (var1 == 0)
+ return 0;
+
+ p = ((((s64) 1048576 - adc_press) << 31) - var2) * 3125;
+ p = div64_s64(p, var1);
+ var1 = (((s64) comp->dig_p9) * (p >> 13) * (p >> 13)) >> 25;
+ var2 = (((s64) comp->dig_p8) * p) >> 19;
+ p = ((p + var1 + var2) >> 8) + (((s64) comp->dig_p7) << 4);
+
+ return (u32) p;
+}
+
+static int bmp280_read_temp(struct bmp280_data *data,
+ int *val)
+{
+ int ret;
+ __be32 tmp = 0;
+ s32 adc_temp, comp_temp;
+ struct bmp280_comp_temp comp;
+
+ ret = bmp280_read_compensation_temp(data, &comp);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB,
+ (u8 *) &tmp, 3);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "failed to read temperature\n");
+ return ret;
+ }
+
+ adc_temp = be32_to_cpu(tmp) >> 12;
+ comp_temp = bmp280_compensate_temp(data, &comp, adc_temp);
+
+ /*
+ * val might be NULL if we're called by the read_press routine,
+ * who only cares about the carry over t_fine value.
+ */
+ if (val) {
+ *val = comp_temp * 10;
+ return IIO_VAL_INT;
+ }
+
+ return 0;
+}
+
+static int bmp280_read_press(struct bmp280_data *data,
+ int *val, int *val2)
+{
+ int ret;
+ __be32 tmp = 0;
+ s32 adc_press;
+ u32 comp_press;
+ struct bmp280_comp_press comp;
+
+ ret = bmp280_read_compensation_press(data, &comp);
+ if (ret < 0)
+ return ret;
+
+ /* Read and compensate temperature so we get a reading of t_fine. */
+ ret = bmp280_read_temp(data, NULL);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB,
+ (u8 *) &tmp, 3);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "failed to read pressure\n");
+ return ret;
+ }
+
+ adc_press = be32_to_cpu(tmp) >> 12;
+ comp_press = bmp280_compensate_press(data, &comp, adc_press);
+
+ *val = comp_press;
+ *val2 = 256000;
+
+ return IIO_VAL_FRACTIONAL;
+}
+
+static int bmp280_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ int ret;
+ struct bmp280_data *data = iio_priv(indio_dev);
+
+ mutex_lock(&data->lock);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_PROCESSED:
+ switch (chan->type) {
+ case IIO_PRESSURE:
+ ret = bmp280_read_press(data, val, val2);
+ break;
+ case IIO_TEMP:
+ ret = bmp280_read_temp(data, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ mutex_unlock(&data->lock);
+
+ return ret;
+}
+
+static const struct iio_info bmp280_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = &bmp280_read_raw,
+};
+
+static int bmp280_chip_init(struct bmp280_data *data)
+{
+ int ret;
+
+ ret = regmap_update_bits(data->regmap, BMP280_REG_CTRL_MEAS,
+ BMP280_OSRS_TEMP_MASK |
+ BMP280_OSRS_PRESS_MASK |
+ BMP280_MODE_MASK,
+ BMP280_OSRS_TEMP_2X |
+ BMP280_OSRS_PRESS_16X |
+ BMP280_MODE_NORMAL);
+ if (ret < 0) {
+ dev_err(&data->client->dev,
+ "failed to write config register\n");
+ return ret;
+ }
+
+ ret = regmap_update_bits(data->regmap, BMP280_REG_CONFIG,
+ BMP280_FILTER_MASK,
+ BMP280_FILTER_4X);
+ if (ret < 0) {
+ dev_err(&data->client->dev,
+ "failed to write config register\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+static int bmp280_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct iio_dev *indio_dev;
+ struct bmp280_data *data;
+ unsigned int chip_id;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, indio_dev);
+ data = iio_priv(indio_dev);
+ mutex_init(&data->lock);
+ data->client = client;
+
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->name = id->name;
+ indio_dev->channels = bmp280_channels;
+ indio_dev->num_channels = ARRAY_SIZE(bmp280_channels);
+ indio_dev->info = &bmp280_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ data->regmap = devm_regmap_init_i2c(client, &bmp280_regmap_config);
+ if (IS_ERR(data->regmap)) {
+ dev_err(&client->dev, "failed to allocate register map\n");
+ return PTR_ERR(data->regmap);
+ }
+
+ ret = regmap_read(data->regmap, BMP280_REG_ID, &chip_id);
+ if (ret < 0)
+ return ret;
+ if (chip_id != BMP280_CHIP_ID) {
+ dev_err(&client->dev, "bad chip id. expected %x got %x\n",
+ BMP280_CHIP_ID, chip_id);
+ return -EINVAL;
+ }
+
+ ret = bmp280_chip_init(data);
+ if (ret < 0)
+ return ret;
+
+ return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct acpi_device_id bmp280_acpi_match[] = {
+ {"BMP0280", 0},
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, bmp280_acpi_match);
+
+static const struct i2c_device_id bmp280_id[] = {
+ {"bmp280", 0},
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, bmp280_id);
+
+static struct i2c_driver bmp280_driver = {
+ .driver = {
+ .name = "bmp280",
+ .acpi_match_table = ACPI_PTR(bmp280_acpi_match),
+ },
+ .probe = bmp280_probe,
+ .id_table = bmp280_id,
+};
+module_i2c_driver(bmp280_driver);
+
+MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>");
+MODULE_DESCRIPTION("Driver for Bosch Sensortec BMP280 pressure and temperature sensor");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/pressure/st_pressure.h b/drivers/iio/pressure/st_pressure.h
index 242943c0c4e4..f5f41490060b 100644
--- a/drivers/iio/pressure/st_pressure.h
+++ b/drivers/iio/pressure/st_pressure.h
@@ -26,8 +26,7 @@ static const struct st_sensors_platform_data default_press_pdata = {
.drdy_int_pin = 1,
};
-int st_press_common_probe(struct iio_dev *indio_dev,
- struct st_sensors_platform_data *pdata);
+int st_press_common_probe(struct iio_dev *indio_dev);
void st_press_common_remove(struct iio_dev *indio_dev);
#ifdef CONFIG_IIO_BUFFER
diff --git a/drivers/iio/pressure/st_pressure_buffer.c b/drivers/iio/pressure/st_pressure_buffer.c
index b37b1c9ac932..2ff53f222352 100644
--- a/drivers/iio/pressure/st_pressure_buffer.c
+++ b/drivers/iio/pressure/st_pressure_buffer.c
@@ -38,10 +38,10 @@ static int st_press_buffer_preenable(struct iio_dev *indio_dev)
static int st_press_buffer_postenable(struct iio_dev *indio_dev)
{
int err;
- struct st_sensor_data *pdata = iio_priv(indio_dev);
+ struct st_sensor_data *press_data = iio_priv(indio_dev);
- pdata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
- if (pdata->buffer_data == NULL) {
+ press_data->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+ if (press_data->buffer_data == NULL) {
err = -ENOMEM;
goto allocate_memory_error;
}
@@ -53,7 +53,7 @@ static int st_press_buffer_postenable(struct iio_dev *indio_dev)
return err;
st_press_buffer_postenable_error:
- kfree(pdata->buffer_data);
+ kfree(press_data->buffer_data);
allocate_memory_error:
return err;
}
@@ -61,7 +61,7 @@ allocate_memory_error:
static int st_press_buffer_predisable(struct iio_dev *indio_dev)
{
int err;
- struct st_sensor_data *pdata = iio_priv(indio_dev);
+ struct st_sensor_data *press_data = iio_priv(indio_dev);
err = iio_triggered_buffer_predisable(indio_dev);
if (err < 0)
@@ -70,7 +70,7 @@ static int st_press_buffer_predisable(struct iio_dev *indio_dev)
err = st_sensors_set_enable(indio_dev, false);
st_press_buffer_predisable_error:
- kfree(pdata->buffer_data);
+ kfree(press_data->buffer_data);
return err;
}
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index 473d914ef470..97baf40d424b 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -175,7 +175,7 @@ static const struct iio_chan_spec st_press_lps001wp_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(1)
};
-static const struct st_sensors st_press_sensors[] = {
+static const struct st_sensor_settings st_press_sensors_settings[] = {
{
.wai = ST_PRESS_LPS331AP_WAI_EXP,
.sensors_supported = {
@@ -333,7 +333,7 @@ static int st_press_read_raw(struct iio_dev *indio_dev,
int *val2, long mask)
{
int err;
- struct st_sensor_data *pdata = iio_priv(indio_dev);
+ struct st_sensor_data *press_data = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
@@ -347,10 +347,10 @@ static int st_press_read_raw(struct iio_dev *indio_dev,
switch (ch->type) {
case IIO_PRESSURE:
- *val2 = pdata->current_fullscale->gain;
+ *val2 = press_data->current_fullscale->gain;
break;
case IIO_TEMP:
- *val2 = pdata->current_fullscale->gain2;
+ *val2 = press_data->current_fullscale->gain2;
break;
default:
err = -EINVAL;
@@ -371,7 +371,7 @@ static int st_press_read_raw(struct iio_dev *indio_dev,
return IIO_VAL_FRACTIONAL;
case IIO_CHAN_INFO_SAMP_FREQ:
- *val = pdata->odr;
+ *val = press_data->odr;
return IIO_VAL_INT;
default:
return -EINVAL;
@@ -409,11 +409,10 @@ static const struct iio_trigger_ops st_press_trigger_ops = {
#define ST_PRESS_TRIGGER_OPS NULL
#endif
-int st_press_common_probe(struct iio_dev *indio_dev,
- struct st_sensors_platform_data *plat_data)
+int st_press_common_probe(struct iio_dev *indio_dev)
{
- struct st_sensor_data *pdata = iio_priv(indio_dev);
- int irq = pdata->get_irq_data_ready(indio_dev);
+ struct st_sensor_data *press_data = iio_priv(indio_dev);
+ int irq = press_data->get_irq_data_ready(indio_dev);
int err;
indio_dev->modes = INDIO_DIRECT_MODE;
@@ -422,28 +421,30 @@ int st_press_common_probe(struct iio_dev *indio_dev,
st_sensors_power_enable(indio_dev);
err = st_sensors_check_device_support(indio_dev,
- ARRAY_SIZE(st_press_sensors),
- st_press_sensors);
+ ARRAY_SIZE(st_press_sensors_settings),
+ st_press_sensors_settings);
if (err < 0)
return err;
- pdata->num_data_channels = ST_PRESS_NUMBER_DATA_CHANNELS;
- pdata->multiread_bit = pdata->sensor->multi_read_bit;
- indio_dev->channels = pdata->sensor->ch;
- indio_dev->num_channels = pdata->sensor->num_ch;
+ press_data->num_data_channels = ST_PRESS_NUMBER_DATA_CHANNELS;
+ press_data->multiread_bit = press_data->sensor_settings->multi_read_bit;
+ indio_dev->channels = press_data->sensor_settings->ch;
+ indio_dev->num_channels = press_data->sensor_settings->num_ch;
- if (pdata->sensor->fs.addr != 0)
- pdata->current_fullscale = (struct st_sensor_fullscale_avl *)
- &pdata->sensor->fs.fs_avl[0];
+ if (press_data->sensor_settings->fs.addr != 0)
+ press_data->current_fullscale =
+ (struct st_sensor_fullscale_avl *)
+ &press_data->sensor_settings->fs.fs_avl[0];
- pdata->odr = pdata->sensor->odr.odr_avl[0].hz;
+ press_data->odr = press_data->sensor_settings->odr.odr_avl[0].hz;
/* Some devices don't support a data ready pin. */
- if (!plat_data && pdata->sensor->drdy_irq.addr)
- plat_data =
+ if (!press_data->dev->platform_data &&
+ press_data->sensor_settings->drdy_irq.addr)
+ press_data->dev->platform_data =
(struct st_sensors_platform_data *)&default_press_pdata;
- err = st_sensors_init_sensor(indio_dev, plat_data);
+ err = st_sensors_init_sensor(indio_dev, press_data->dev->platform_data);
if (err < 0)
return err;
@@ -479,12 +480,12 @@ EXPORT_SYMBOL(st_press_common_probe);
void st_press_common_remove(struct iio_dev *indio_dev)
{
- struct st_sensor_data *pdata = iio_priv(indio_dev);
+ struct st_sensor_data *press_data = iio_priv(indio_dev);
st_sensors_power_disable(indio_dev);
iio_device_unregister(indio_dev);
- if (pdata->get_irq_data_ready(indio_dev) > 0)
+ if (press_data->get_irq_data_ready(indio_dev) > 0)
st_sensors_deallocate_trigger(indio_dev);
st_press_deallocate_ring(indio_dev);
diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c
index acaf165260bb..137788bba4a3 100644
--- a/drivers/iio/pressure/st_pressure_i2c.c
+++ b/drivers/iio/pressure/st_pressure_i2c.c
@@ -43,20 +43,19 @@ static int st_press_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct iio_dev *indio_dev;
- struct st_sensor_data *pdata;
+ struct st_sensor_data *press_data;
int err;
- indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*pdata));
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*press_data));
if (!indio_dev)
return -ENOMEM;
- pdata = iio_priv(indio_dev);
- pdata->dev = &client->dev;
+ press_data = iio_priv(indio_dev);
st_sensors_of_i2c_probe(client, st_press_of_match);
- st_sensors_i2c_configure(indio_dev, client, pdata);
+ st_sensors_i2c_configure(indio_dev, client, press_data);
- err = st_press_common_probe(indio_dev, client->dev.platform_data);
+ err = st_press_common_probe(indio_dev);
if (err < 0)
return err;
diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c
index f45d430ec529..1ffa6d4d349c 100644
--- a/drivers/iio/pressure/st_pressure_spi.c
+++ b/drivers/iio/pressure/st_pressure_spi.c
@@ -21,19 +21,18 @@
static int st_press_spi_probe(struct spi_device *spi)
{
struct iio_dev *indio_dev;
- struct st_sensor_data *pdata;
+ struct st_sensor_data *press_data;
int err;
- indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*pdata));
+ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*press_data));
if (indio_dev == NULL)
return -ENOMEM;
- pdata = iio_priv(indio_dev);
- pdata->dev = &spi->dev;
+ press_data = iio_priv(indio_dev);
- st_sensors_spi_configure(indio_dev, spi, pdata);
+ st_sensors_spi_configure(indio_dev, spi, press_data);
- err = st_press_common_probe(indio_dev, spi->dev.platform_data);
+ err = st_press_common_probe(indio_dev);
if (err < 0)
return err;
diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c
index 8349cc0fdf66..466aa4314667 100644
--- a/drivers/iio/proximity/as3935.c
+++ b/drivers/iio/proximity/as3935.c
@@ -95,7 +95,7 @@ static int as3935_read(struct as3935_state *st, unsigned int reg, int *val)
*val = ret;
return 0;
-};
+}
static int as3935_write(struct as3935_state *st,
unsigned int reg,
@@ -107,7 +107,7 @@ static int as3935_write(struct as3935_state *st,
buf[1] = val;
return spi_write(st->spi, buf, 2);
-};
+}
static ssize_t as3935_sensor_sensitivity_show(struct device *dev,
struct device_attribute *attr,
@@ -122,7 +122,7 @@ static ssize_t as3935_sensor_sensitivity_show(struct device *dev,
val = (val & AS3935_AFE_MASK) >> 1;
return sprintf(buf, "%d\n", val);
-};
+}
static ssize_t as3935_sensor_sensitivity_store(struct device *dev,
struct device_attribute *attr,
@@ -142,7 +142,7 @@ static ssize_t as3935_sensor_sensitivity_store(struct device *dev,
as3935_write(st, AS3935_AFE_GAIN, val << 1);
return len;
-};
+}
static IIO_DEVICE_ATTR(sensor_sensitivity, S_IRUGO | S_IWUSR,
as3935_sensor_sensitivity_show, as3935_sensor_sensitivity_store, 0);
@@ -214,7 +214,7 @@ err_read:
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
-};
+}
static const struct iio_trigger_ops iio_interrupt_trigger_ops = {
.owner = THIS_MODULE,
@@ -238,7 +238,7 @@ static void as3935_event_work(struct work_struct *work)
dev_warn(&st->spi->dev, "noise level is too high");
break;
}
-};
+}
static irqreturn_t as3935_interrupt_handler(int irq, void *private)
{
@@ -417,7 +417,7 @@ unregister_trigger:
iio_trigger_unregister(st->trig);
return ret;
-};
+}
static int as3935_remove(struct spi_device *spi)
{
@@ -429,7 +429,7 @@ static int as3935_remove(struct spi_device *spi)
iio_trigger_unregister(st->trig);
return 0;
-};
+}
static const struct spi_device_id as3935_id[] = {
{"as3935", 0},