summaryrefslogtreecommitdiffstats
path: root/drivers/iio
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio')
-rw-r--r--drivers/iio/adc/aspeed_adc.c7
-rw-r--r--drivers/iio/adc/stm32-adc.c7
-rw-r--r--drivers/iio/imu/adis_trigger.c7
-rw-r--r--drivers/iio/industrialio-buffer.c2
-rw-r--r--drivers/iio/proximity/Kconfig2
5 files changed, 15 insertions, 10 deletions
diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
index 327a49ba1991..9515ca165dfd 100644
--- a/drivers/iio/adc/aspeed_adc.c
+++ b/drivers/iio/adc/aspeed_adc.c
@@ -243,7 +243,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)
ASPEED_ADC_INIT_POLLING_TIME,
ASPEED_ADC_INIT_TIMEOUT);
if (ret)
- goto scaler_error;
+ goto poll_timeout_error;
}
/* Start all channels in normal mode. */
@@ -274,9 +274,10 @@ iio_register_error:
writel(ASPEED_OPERATION_MODE_POWER_DOWN,
data->base + ASPEED_REG_ENGINE_CONTROL);
clk_disable_unprepare(data->clk_scaler->clk);
-reset_error:
- reset_control_assert(data->rst);
clk_enable_error:
+poll_timeout_error:
+ reset_control_assert(data->rst);
+reset_error:
clk_hw_unregister_divider(data->clk_scaler);
scaler_error:
clk_hw_unregister_divider(data->clk_prescaler);
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index 7f5def465340..9a2583caedaa 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -722,8 +722,6 @@ static int stm32h7_adc_enable(struct stm32_adc *adc)
int ret;
u32 val;
- /* Clear ADRDY by writing one, then enable ADC */
- stm32_adc_set_bits(adc, STM32H7_ADC_ISR, STM32H7_ADRDY);
stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_ADEN);
/* Poll for ADRDY to be set (after adc startup time) */
@@ -731,8 +729,11 @@ static int stm32h7_adc_enable(struct stm32_adc *adc)
val & STM32H7_ADRDY,
100, STM32_ADC_TIMEOUT_US);
if (ret) {
- stm32_adc_clr_bits(adc, STM32H7_ADC_CR, STM32H7_ADEN);
+ stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_ADDIS);
dev_err(&indio_dev->dev, "Failed to enable ADC\n");
+ } else {
+ /* Clear ADRDY by writing one */
+ stm32_adc_set_bits(adc, STM32H7_ADC_ISR, STM32H7_ADRDY);
}
return ret;
diff --git a/drivers/iio/imu/adis_trigger.c b/drivers/iio/imu/adis_trigger.c
index 0dd5a381be64..457372f36791 100644
--- a/drivers/iio/imu/adis_trigger.c
+++ b/drivers/iio/imu/adis_trigger.c
@@ -46,6 +46,10 @@ int adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev)
if (adis->trig == NULL)
return -ENOMEM;
+ adis->trig->dev.parent = &adis->spi->dev;
+ adis->trig->ops = &adis_trigger_ops;
+ iio_trigger_set_drvdata(adis->trig, adis);
+
ret = request_irq(adis->spi->irq,
&iio_trigger_generic_data_rdy_poll,
IRQF_TRIGGER_RISING,
@@ -54,9 +58,6 @@ int adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev)
if (ret)
goto error_free_trig;
- adis->trig->dev.parent = &adis->spi->dev;
- adis->trig->ops = &adis_trigger_ops;
- iio_trigger_set_drvdata(adis->trig, adis);
ret = iio_trigger_register(adis->trig);
indio_dev->trig = iio_trigger_get(adis->trig);
diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index 79abf70a126d..cd5bfe39591b 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -175,7 +175,7 @@ __poll_t iio_buffer_poll(struct file *filp,
struct iio_dev *indio_dev = filp->private_data;
struct iio_buffer *rb = indio_dev->buffer;
- if (!indio_dev->info)
+ if (!indio_dev->info || rb == NULL)
return 0;
poll_wait(filp, &rb->pollq, wait);
diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig
index fcb1c4ba5e41..f726f9427602 100644
--- a/drivers/iio/proximity/Kconfig
+++ b/drivers/iio/proximity/Kconfig
@@ -68,6 +68,8 @@ config SX9500
config SRF08
tristate "Devantech SRF02/SRF08/SRF10 ultrasonic ranger sensor"
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
depends on I2C
help
Say Y here to build a driver for Devantech SRF02/SRF08/SRF10