diff options
Diffstat (limited to 'drivers/iio/temperature')
| -rw-r--r-- | drivers/iio/temperature/hid-sensor-temperature.c | 13 | ||||
| -rw-r--r-- | drivers/iio/temperature/mlx90614.c | 6 | ||||
| -rw-r--r-- | drivers/iio/temperature/mlx90632.c | 9 | ||||
| -rw-r--r-- | drivers/iio/temperature/tmp006.c | 5 | ||||
| -rw-r--r-- | drivers/iio/temperature/tmp007.c | 6 |
5 files changed, 11 insertions, 28 deletions
diff --git a/drivers/iio/temperature/hid-sensor-temperature.c b/drivers/iio/temperature/hid-sensor-temperature.c index b592fc4f007e..eda55b9c1e9b 100644 --- a/drivers/iio/temperature/hid-sensor-temperature.c +++ b/drivers/iio/temperature/hid-sensor-temperature.c @@ -1,18 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * HID Sensors Driver * Copyright (c) 2017, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. */ #include <linux/device.h> #include <linux/hid-sensor-hub.h> diff --git a/drivers/iio/temperature/mlx90614.c b/drivers/iio/temperature/mlx90614.c index 13a4cec64ea8..b7c56ddf884f 100644 --- a/drivers/iio/temperature/mlx90614.c +++ b/drivers/iio/temperature/mlx90614.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * mlx90614.c - Support for Melexis MLX90614 contactless IR temperature sensor * @@ -5,10 +6,6 @@ * Copyright (c) 2015 Essensium NV * Copyright (c) 2015 Melexis * - * This file is subject to the terms and conditions of version 2 of - * the GNU General Public License. See the file COPYING in the main - * directory of this archive for more details. - * * Driver for the Melexis MLX90614 I2C 16-bit IR thermopile sensor * * (7-bit I2C slave address 0x5a, 100KHz bus speed only!) @@ -20,7 +17,6 @@ * i2c adapter is locked since it cannot be used by other clients. The SCL line * always has a pull-up so we do not need an extra GPIO to drive it high. If * the "wakeup" GPIO is not given, power management will be disabled. - * */ #include <linux/err.h> diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c index be03be719efe..eaca6ba06864 100644 --- a/drivers/iio/temperature/mlx90632.c +++ b/drivers/iio/temperature/mlx90632.c @@ -81,6 +81,8 @@ /* Magic constants */ #define MLX90632_ID_MEDICAL 0x0105 /* EEPROM DSPv5 Medical device id */ #define MLX90632_ID_CONSUMER 0x0205 /* EEPROM DSPv5 Consumer device id */ +#define MLX90632_DSP_VERSION 5 /* DSP version */ +#define MLX90632_DSP_MASK GENMASK(7, 0) /* DSP version in EE_VERSION */ #define MLX90632_RESET_CMD 0x0006 /* Reset sensor (address or global) */ #define MLX90632_REF_12 12LL /**< ResCtrlRef value of Ch 1 or Ch 2 */ #define MLX90632_REF_3 12LL /**< ResCtrlRef value of Channel 3 */ @@ -667,10 +669,13 @@ static int mlx90632_probe(struct i2c_client *client, } else if (read == MLX90632_ID_CONSUMER) { dev_dbg(&client->dev, "Detected Consumer EEPROM calibration %x\n", read); + } else if ((read & MLX90632_DSP_MASK) == MLX90632_DSP_VERSION) { + dev_dbg(&client->dev, + "Detected Unknown EEPROM calibration %x\n", read); } else { dev_err(&client->dev, - "EEPROM version mismatch %x (expected %x or %x)\n", - read, MLX90632_ID_CONSUMER, MLX90632_ID_MEDICAL); + "Wrong DSP version %x (expected %x)\n", + read, MLX90632_DSP_VERSION); return -EPROTONOSUPPORT; } diff --git a/drivers/iio/temperature/tmp006.c b/drivers/iio/temperature/tmp006.c index a9b5b7cc7836..cc45d8345eb9 100644 --- a/drivers/iio/temperature/tmp006.c +++ b/drivers/iio/temperature/tmp006.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * tmp006.c - Support for TI TMP006 IR thermopile sensor * * Copyright (c) 2013 Peter Meerwald <pmeerw@pmeerw.net> * - * This file is subject to the terms and conditions of version 2 of - * the GNU General Public License. See the file COPYING in the main - * directory of this archive for more details. - * * Driver for the Texas Instruments I2C 16-bit IR thermopile sensor * * (7-bit I2C slave address 0x40, changeable via ADR pins) diff --git a/drivers/iio/temperature/tmp007.c b/drivers/iio/temperature/tmp007.c index 0e3f2d432e10..7df234d96f94 100644 --- a/drivers/iio/temperature/tmp007.c +++ b/drivers/iio/temperature/tmp007.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * tmp007.c - Support for TI TMP007 IR thermopile sensor with integrated math engine * * Copyright (c) 2017 Manivannan Sadhasivam <manivannanece23@gmail.com> * - * This file is subject to the terms and conditions of version 2 of - * the GNU General Public License. See the file COPYING in the main - * directory of this archive for more details. - * * Driver for the Texas Instruments I2C 16-bit IR thermopile sensor * * (7-bit I2C slave address (0x40 - 0x47), changeable via ADR pins) @@ -15,7 +12,6 @@ * 1. This driver assumes that the sensor has been calibrated beforehand * 2. Limit threshold events are enabled at the start * 3. Operating mode: INT - * */ #include <linux/err.h> |