diff options
Diffstat (limited to 'drivers/ide')
| -rw-r--r-- | drivers/ide/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/ide/au1xxx-ide.c | 46 |
2 files changed, 30 insertions, 22 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 76b6d98bd295..5a26584934ca 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -677,19 +677,19 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST config BLK_DEV_IDE_AU1XXX bool "IDE for AMD Alchemy Au1200" - depends on SOC_AU1200 + depends on MIPS_ALCHEMY select IDE_XFER_MODE choice prompt "IDE Mode for AMD Alchemy Au1200" default BLK_DEV_IDE_AU1XXX_PIO_DBDMA - depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX + depends on BLK_DEV_IDE_AU1XXX config BLK_DEV_IDE_AU1XXX_PIO_DBDMA bool "PIO+DbDMA IDE for AMD Alchemy Au1200" config BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA bool "MDMA2+DbDMA IDE for AMD Alchemy Au1200" - depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX + depends on BLK_DEV_IDE_AU1XXX endchoice config BLK_DEV_IDE_TX4938 diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c index b26c23416fa7..259786ca8b75 100644 --- a/drivers/ide/au1xxx-ide.c +++ b/drivers/ide/au1xxx-ide.c @@ -36,13 +36,17 @@ #include <linux/ide.h> #include <linux/scatterlist.h> -#include <asm/mach-au1x00/au1xxx.h> +#include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> #include <asm/mach-au1x00/au1xxx_ide.h> #define DRV_NAME "au1200-ide" #define DRV_AUTHOR "Enrico Walther <enrico.walther@amd.com> / Pete Popov <ppopov@embeddedalley.com>" +#ifndef IDE_REG_SHIFT +#define IDE_REG_SHIFT 5 +#endif + /* enable the burstmode in the dbdma */ #define IDE_AU1XXX_BURSTMODE 1 @@ -317,10 +321,11 @@ static void auide_ddma_rx_callback(int irq, void *param) } #endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */ -static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 devwidth, u32 flags) +static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, + u32 devwidth, u32 flags, u32 regbase) { dev->dev_id = dev_id; - dev->dev_physaddr = (u32)IDE_PHYS_ADDR; + dev->dev_physaddr = CPHYSADDR(regbase); dev->dev_intlevel = 0; dev->dev_intpolarity = 0; dev->dev_tsize = tsize; @@ -344,7 +349,7 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) dbdev_tab_t source_dev_tab, target_dev_tab; u32 dev_id, tsize, devwidth, flags; - dev_id = IDE_DDMA_REQ; + dev_id = hwif->ddma_id; tsize = 8; /* 1 */ devwidth = 32; /* 16 */ @@ -356,20 +361,17 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) #endif /* setup dev_tab for tx channel */ - auide_init_dbdma_dev( &source_dev_tab, - dev_id, - tsize, devwidth, DEV_FLAGS_OUT | flags); + auide_init_dbdma_dev(&source_dev_tab, dev_id, tsize, devwidth, + DEV_FLAGS_OUT | flags, auide->regbase); auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); - auide_init_dbdma_dev( &source_dev_tab, - dev_id, - tsize, devwidth, DEV_FLAGS_IN | flags); + auide_init_dbdma_dev(&source_dev_tab, dev_id, tsize, devwidth, + DEV_FLAGS_IN | flags, auide->regbase); auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); /* We also need to add a target device for the DMA */ - auide_init_dbdma_dev( &target_dev_tab, - (u32)DSCR_CMD0_ALWAYS, - tsize, devwidth, DEV_FLAGS_ANYUSE); + auide_init_dbdma_dev(&target_dev_tab, (u32)DSCR_CMD0_ALWAYS, tsize, + devwidth, DEV_FLAGS_ANYUSE, auide->regbase); auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab); /* Get a channel for TX */ @@ -411,14 +413,12 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) #endif /* setup dev_tab for tx channel */ - auide_init_dbdma_dev( &source_dev_tab, - (u32)DSCR_CMD0_ALWAYS, - 8, 32, DEV_FLAGS_OUT | flags); + auide_init_dbdma_dev(&source_dev_tab, (u32)DSCR_CMD0_ALWAYS, 8, 32, + DEV_FLAGS_OUT | flags, auide->regbase); auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); - auide_init_dbdma_dev( &source_dev_tab, - (u32)DSCR_CMD0_ALWAYS, - 8, 32, DEV_FLAGS_IN | flags); + auide_init_dbdma_dev(&source_dev_tab, (u32)DSCR_CMD0_ALWAYS, 8, 32, + DEV_FLAGS_IN | flags, auide->regbase); auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); /* Get a channel for TX */ @@ -540,6 +540,14 @@ static int au_ide_probe(struct platform_device *dev) goto out; } + res = platform_get_resource(dev, IORESOURCE_DMA, 0); + if (!res) { + pr_debug("%s: no DDMA ID resource\n", DRV_NAME); + ret = -ENODEV; + goto out; + } + ahwif->ddma_id = res->start; + memset(&hw, 0, sizeof(hw)); auide_setup_ports(&hw, ahwif); hw.irq = ahwif->irq; |