diff options
Diffstat (limited to 'drivers/ide/ide-lib.c')
| -rw-r--r-- | drivers/ide/ide-lib.c | 95 |
1 files changed, 54 insertions, 41 deletions
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 1932119dfa00..7913ad5d4979 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -43,7 +43,6 @@ const char *ide_xfer_verbose(u8 mode) return s; } - EXPORT_SYMBOL(ide_xfer_verbose); /** @@ -87,7 +86,7 @@ static u8 ide_rate_filter(ide_drive_t *drive, u8 speed) * This is used by most chipset support modules when "auto-tuning". */ -u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode) +u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode) { u16 *id = drive->id; int pio_mode = -1, overridden = 0; @@ -131,7 +130,6 @@ u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode) return pio_mode; } - EXPORT_SYMBOL_GPL(ide_get_best_pio_mode); /* req_pio == "255" for auto-tune */ @@ -162,7 +160,6 @@ void ide_set_pio(ide_drive_t *drive, u8 req_pio) (void)ide_set_pio_mode(drive, XFER_PIO_0 + pio); } - EXPORT_SYMBOL_GPL(ide_set_pio); /** @@ -173,7 +170,7 @@ EXPORT_SYMBOL_GPL(ide_set_pio); * Enable or disable bounce buffering for the device. Drives move * between PIO and DMA and that changes the rules we need. */ - + void ide_toggle_bounce(ide_drive_t *drive, int on) { u64 addr = BLK_BOUNCE_HIGH; /* dma64_addr_t */ @@ -243,14 +240,13 @@ int ide_set_dma_mode(ide_drive_t *drive, const u8 mode) return ide_config_drive_speed(drive, mode); } } - EXPORT_SYMBOL_GPL(ide_set_dma_mode); /** * ide_set_xfer_rate - set transfer rate * @drive: drive to set * @rate: speed to attempt to set - * + * * General helper for setting the speed of an IDE device. This * function knows about user enforced limits from the configuration * which ->set_pio_mode/->set_dma_mode does not. @@ -286,7 +282,7 @@ static void ide_dump_opcode(ide_drive_t *drive) if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) task = rq->special; - printk("ide: failed opcode was: "); + printk(KERN_ERR "ide: failed opcode was: "); if (task == NULL) printk(KERN_CONT "unknown\n"); else @@ -324,44 +320,55 @@ static void ide_dump_sector(ide_drive_t *drive) drive->hwif->tp_ops->tf_read(drive, &task); if (lba48 || (tf->device & ATA_LBA)) - printk(", LBAsect=%llu", + printk(KERN_CONT ", LBAsect=%llu", (unsigned long long)ide_get_lba_addr(tf, lba48)); else - printk(", CHS=%d/%d/%d", (tf->lbah << 8) + tf->lbam, - tf->device & 0xf, tf->lbal); + printk(KERN_CONT ", CHS=%d/%d/%d", (tf->lbah << 8) + tf->lbam, + tf->device & 0xf, tf->lbal); } static void ide_dump_ata_error(ide_drive_t *drive, u8 err) { - printk("{ "); - if (err & ATA_ABORTED) printk("DriveStatusError "); + printk(KERN_ERR "{ "); + if (err & ATA_ABORTED) + printk(KERN_CONT "DriveStatusError "); if (err & ATA_ICRC) - printk((err & ATA_ABORTED) ? "BadCRC " : "BadSector "); - if (err & ATA_UNC) printk("UncorrectableError "); - if (err & ATA_IDNF) printk("SectorIdNotFound "); - if (err & ATA_TRK0NF) printk("TrackZeroNotFound "); - if (err & ATA_AMNF) printk("AddrMarkNotFound "); - printk("}"); + printk(KERN_CONT "%s", + (err & ATA_ABORTED) ? "BadCRC " : "BadSector "); + if (err & ATA_UNC) + printk(KERN_CONT "UncorrectableError "); + if (err & ATA_IDNF) + printk(KERN_CONT "SectorIdNotFound "); + if (err & ATA_TRK0NF) + printk(KERN_CONT "TrackZeroNotFound "); + if (err & ATA_AMNF) + printk(KERN_CONT "AddrMarkNotFound "); + printk(KERN_CONT "}"); if ((err & (ATA_BBK | ATA_ABORTED)) == ATA_BBK || (err & (ATA_UNC | ATA_IDNF | ATA_AMNF))) { ide_dump_sector(drive); if (HWGROUP(drive) && HWGROUP(drive)->rq) - printk(", sector=%llu", + printk(KERN_CONT ", sector=%llu", (unsigned long long)HWGROUP(drive)->rq->sector); } - printk("\n"); + printk(KERN_CONT "\n"); } static void ide_dump_atapi_error(ide_drive_t *drive, u8 err) { - printk("{ "); - if (err & ATAPI_ILI) printk("IllegalLengthIndication "); - if (err & ATAPI_EOM) printk("EndOfMedia "); - if (err & ATA_ABORTED) printk("AbortedCommand "); - if (err & ATA_MCR) printk("MediaChangeRequested "); - if (err & ATAPI_LFS) printk("LastFailedSense=0x%02x ", - (err & ATAPI_LFS) >> 4); - printk("}\n"); + printk(KERN_ERR "{ "); + if (err & ATAPI_ILI) + printk(KERN_CONT "IllegalLengthIndication "); + if (err & ATAPI_EOM) + printk(KERN_CONT "EndOfMedia "); + if (err & ATA_ABORTED) + printk(KERN_CONT "AbortedCommand "); + if (err & ATA_MCR) + printk(KERN_CONT "MediaChangeRequested "); + if (err & ATAPI_LFS) + printk(KERN_CONT "LastFailedSense=0x%02x ", + (err & ATAPI_LFS) >> 4); + printk(KERN_CONT "}\n"); } /** @@ -381,22 +388,29 @@ u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat) u8 err = 0; local_irq_save(flags); - printk("%s: %s: status=0x%02x { ", drive->name, msg, stat); + printk(KERN_ERR "%s: %s: status=0x%02x { ", drive->name, msg, stat); if (stat & ATA_BUSY) - printk("Busy "); + printk(KERN_CONT "Busy "); else { - if (stat & ATA_DRDY) printk("DriveReady "); - if (stat & ATA_DF) printk("DeviceFault "); - if (stat & ATA_DSC) printk("SeekComplete "); - if (stat & ATA_DRQ) printk("DataRequest "); - if (stat & ATA_CORR) printk("CorrectedError "); - if (stat & ATA_IDX) printk("Index "); - if (stat & ATA_ERR) printk("Error "); + if (stat & ATA_DRDY) + printk(KERN_CONT "DriveReady "); + if (stat & ATA_DF) + printk(KERN_CONT "DeviceFault "); + if (stat & ATA_DSC) + printk(KERN_CONT "SeekComplete "); + if (stat & ATA_DRQ) + printk(KERN_CONT "DataRequest "); + if (stat & ATA_CORR) + printk(KERN_CONT "CorrectedError "); + if (stat & ATA_IDX) + printk(KERN_CONT "Index "); + if (stat & ATA_ERR) + printk(KERN_CONT "Error "); } - printk("}\n"); + printk(KERN_CONT "}\n"); if ((stat & (ATA_BUSY | ATA_ERR)) == ATA_ERR) { err = ide_read_error(drive); - printk("%s: %s: error=0x%02x ", drive->name, msg, err); + printk(KERN_ERR "%s: %s: error=0x%02x ", drive->name, msg, err); if (drive->media == ide_disk) ide_dump_ata_error(drive, err); else @@ -406,5 +420,4 @@ u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat) local_irq_restore(flags); return err; } - EXPORT_SYMBOL(ide_dump_status); |