summaryrefslogtreecommitdiffstats
path: root/drivers/ide/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/Kconfig')
-rw-r--r--drivers/ide/Kconfig24
1 files changed, 12 insertions, 12 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 9827c5e686cb..811dbbd9306c 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -327,7 +327,7 @@ config BLK_DEV_OPTI621
select BLK_DEV_IDEPCI
help
This is a driver for the OPTi 82C621 EIDE controller.
- Please read the comments at the top of <file:drivers/ide/pci/opti621.c>.
+ Please read the comments at the top of <file:drivers/ide/opti621.c>.
config BLK_DEV_RZ1000
tristate "RZ1000 chipset bugfix/support"
@@ -365,7 +365,7 @@ config BLK_DEV_ALI15X3
normal dual channel support.
Please read the comments at the top of
- <file:drivers/ide/pci/alim15x3.c>.
+ <file:drivers/ide/alim15x3.c>.
If unsure, say N.
@@ -528,7 +528,7 @@ config BLK_DEV_NS87415
This driver adds detection and support for the NS87415 chip
(used mainly on SPARC64 and PA-RISC machines).
- Please read the comments at the top of <file:drivers/ide/pci/ns87415.c>.
+ Please read the comments at the top of <file:drivers/ide/ns87415.c>.
config BLK_DEV_PDC202XX_OLD
tristate "PROMISE PDC202{46|62|65|67} support"
@@ -547,7 +547,7 @@ config BLK_DEV_PDC202XX_OLD
for more than one card.
Please read the comments at the top of
- <file:drivers/ide/pci/pdc202xx_old.c>.
+ <file:drivers/ide/pdc202xx_old.c>.
If unsure, say N.
@@ -593,7 +593,7 @@ config BLK_DEV_SIS5513
ATA100: SiS635, SiS645, SiS650, SiS730, SiS735, SiS740,
SiS745, SiS750
- Please read the comments at the top of <file:drivers/ide/pci/sis5513.c>.
+ Please read the comments at the top of <file:drivers/ide/sis5513.c>.
config BLK_DEV_SL82C105
tristate "Winbond SL82c105 support"
@@ -616,7 +616,7 @@ config BLK_DEV_SLC90E66
look-a-like to the PIIX4 it should be a nice addition.
Please read the comments at the top of
- <file:drivers/ide/pci/slc90e66.c>.
+ <file:drivers/ide/slc90e66.c>.
config BLK_DEV_TRM290
tristate "Tekram TRM290 chipset support"
@@ -625,7 +625,7 @@ config BLK_DEV_TRM290
This driver adds support for bus master DMA transfers
using the Tekram TRM290 PCI IDE chip. Volunteers are
needed for further tweaking and development.
- Please read the comments at the top of <file:drivers/ide/pci/trm290.c>.
+ Please read the comments at the top of <file:drivers/ide/trm290.c>.
config BLK_DEV_VIA82CXXX
tristate "VIA82CXXX chipset support"
@@ -836,7 +836,7 @@ config BLK_DEV_ALI14XX
of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
I/O speeds to be set as well.
See the files <file:Documentation/ide/ide.txt> and
- <file:drivers/ide/legacy/ali14xx.c> for more info.
+ <file:drivers/ide/ali14xx.c> for more info.
config BLK_DEV_DTC2278
tristate "DTC-2278 support"
@@ -847,7 +847,7 @@ config BLK_DEV_DTC2278
boot parameter. It enables support for the secondary IDE interface
of the DTC-2278 card, and permits faster I/O speeds to be set as
well. See the <file:Documentation/ide/ide.txt> and
- <file:drivers/ide/legacy/dtc2278.c> files for more info.
+ <file:drivers/ide/dtc2278.c> files for more info.
config BLK_DEV_HT6560B
tristate "Holtek HT6560B support"
@@ -858,7 +858,7 @@ config BLK_DEV_HT6560B
boot parameter. It enables support for the secondary IDE interface
of the Holtek card, and permits faster I/O speeds to be set as well.
See the <file:Documentation/ide/ide.txt> and
- <file:drivers/ide/legacy/ht6560b.c> files for more info.
+ <file:drivers/ide/ht6560b.c> files for more info.
config BLK_DEV_QD65XX
tristate "QDI QD65xx support"
@@ -867,7 +867,7 @@ config BLK_DEV_QD65XX
help
This driver is enabled at runtime using the "qd65xx.probe" kernel
boot parameter. It permits faster I/O speeds to be set. See the
- <file:Documentation/ide/ide.txt> and <file:drivers/ide/legacy/qd65xx.c>
+ <file:Documentation/ide/ide.txt> and <file:drivers/ide/qd65xx.c>
for more info.
config BLK_DEV_UMC8672
@@ -879,7 +879,7 @@ config BLK_DEV_UMC8672
boot parameter. It enables support for the secondary IDE interface
of the UMC-8672, and permits faster I/O speeds to be set as well.
See the files <file:Documentation/ide/ide.txt> and
- <file:drivers/ide/legacy/umc8672.c> for more info.
+ <file:drivers/ide/umc8672.c> for more info.
endif