diff options
Diffstat (limited to 'drivers/i2c')
| -rw-r--r-- | drivers/i2c/chips/Kconfig | 18 | ||||
| -rw-r--r-- | drivers/i2c/chips/Makefile | 2 | ||||
| -rw-r--r-- | drivers/i2c/chips/rtc8564.c | 385 | ||||
| -rw-r--r-- | drivers/i2c/chips/rtc8564.h | 78 | ||||
| -rw-r--r-- | drivers/i2c/chips/x1205.c | 698 |
5 files changed, 0 insertions, 1181 deletions
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index f9fae28f5612..7aa5c38f0855 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -65,15 +65,6 @@ config SENSORS_PCF8591 This driver can also be built as a module. If so, the module will be called pcf8591. -config SENSORS_RTC8564 - tristate "Epson 8564 RTC chip" - depends on I2C && EXPERIMENTAL - help - If you say yes here you get support for the Epson 8564 RTC chip. - - This driver can also be built as a module. If so, the module - will be called i2c-rtc8564. - config ISP1301_OMAP tristate "Philips ISP1301 with OMAP OTG" depends on I2C && ARCH_OMAP_OTG @@ -126,13 +117,4 @@ config SENSORS_MAX6875 This driver can also be built as a module. If so, the module will be called max6875. -config RTC_X1205_I2C - tristate "Xicor X1205 RTC chip" - depends on I2C && EXPERIMENTAL - help - If you say yes here you get support for the Xicor X1205 RTC chip. - - This driver can also be built as a module. If so, the module - will be called x1205. - endmenu diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index 46178b57b1f1..779868ef2e26 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -10,10 +10,8 @@ obj-$(CONFIG_SENSORS_M41T00) += m41t00.o obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o -obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o obj-$(CONFIG_TPS65010) += tps65010.o -obj-$(CONFIG_RTC_X1205_I2C) += x1205.o ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) EXTRA_CFLAGS += -DDEBUG diff --git a/drivers/i2c/chips/rtc8564.c b/drivers/i2c/chips/rtc8564.c deleted file mode 100644 index 0d8699b3f488..000000000000 --- a/drivers/i2c/chips/rtc8564.c +++ /dev/null @@ -1,385 +0,0 @@ -/* - * linux/drivers/i2c/chips/rtc8564.c - * - * Copyright (C) 2002-2004 Stefan Eletzhofer - * - * based on linux/drivers/acron/char/pcf8583.c - * Copyright (C) 2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Driver for system3's EPSON RTC 8564 chip - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/bcd.h> -#include <linux/i2c.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/rtc.h> /* get the user-level API */ -#include <linux/init.h> - -#include "rtc8564.h" - -#ifdef DEBUG -# define _DBG(x, fmt, args...) do{ if (debug>=x) printk(KERN_DEBUG"%s: " fmt "\n", __FUNCTION__, ##args); } while(0); -#else -# define _DBG(x, fmt, args...) do { } while(0); -#endif - -#define _DBGRTCTM(x, rtctm) if (debug>=x) printk("%s: secs=%d, mins=%d, hours=%d, mday=%d, " \ - "mon=%d, year=%d, wday=%d VL=%d\n", __FUNCTION__, \ - (rtctm).secs, (rtctm).mins, (rtctm).hours, (rtctm).mday, \ - (rtctm).mon, (rtctm).year, (rtctm).wday, (rtctm).vl); - -struct rtc8564_data { - struct i2c_client client; - u16 ctrl; -}; - -static inline u8 _rtc8564_ctrl1(struct i2c_client *client) -{ - struct rtc8564_data *data = i2c_get_clientdata(client); - return data->ctrl & 0xff; -} -static inline u8 _rtc8564_ctrl2(struct i2c_client *client) -{ - struct rtc8564_data *data = i2c_get_clientdata(client); - return (data->ctrl & 0xff00) >> 8; -} - -#define CTRL1(c) _rtc8564_ctrl1(c) -#define CTRL2(c) _rtc8564_ctrl2(c) - -static int debug; -module_param(debug, int, S_IRUGO | S_IWUSR); - -static struct i2c_driver rtc8564_driver; - -static unsigned short ignore[] = { I2C_CLIENT_END }; -static unsigned short normal_addr[] = { 0x51, I2C_CLIENT_END }; - -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_addr, - .probe = ignore, - .ignore = ignore, -}; - -static int rtc8564_read_mem(struct i2c_client *client, struct mem *mem); -static int rtc8564_write_mem(struct i2c_client *client, struct mem *mem); - -static int rtc8564_read(struct i2c_client *client, unsigned char adr, - unsigned char *buf, unsigned char len) -{ - int ret = -EIO; - unsigned char addr[1] = { adr }; - struct i2c_msg msgs[2] = { - {client->addr, 0, 1, addr}, - {client->addr, I2C_M_RD, len, buf} - }; - - _DBG(1, "client=%p, adr=%d, buf=%p, len=%d", client, adr, buf, len); - - if (!buf) { - ret = -EINVAL; - goto done; - } - - ret = i2c_transfer(client->adapter, msgs, 2); - if (ret == 2) { - ret = 0; - } - -done: - return ret; -} - -static int rtc8564_write(struct i2c_client *client, unsigned char adr, - unsigned char *data, unsigned char len) -{ - int ret = 0; - unsigned char _data[16]; - struct i2c_msg wr; - int i; - - if (!data || len > 15) { - ret = -EINVAL; - goto done; - } - - _DBG(1, "client=%p, adr=%d, buf=%p, len=%d", client, adr, data, len); - - _data[0] = adr; - for (i = 0; i < len; i++) { - _data[i + 1] = data[i]; - _DBG(5, "data[%d] = 0x%02x (%d)", i, data[i], data[i]); - } - - wr.addr = client->addr; - wr.flags = 0; - wr.len = len + 1; - wr.buf = _data; - - ret = i2c_transfer(client->adapter, &wr, 1); - if (ret == 1) { - ret = 0; - } - -done: - return ret; -} - -static int rtc8564_attach(struct i2c_adapter *adap, int addr, int kind) -{ - int ret; - struct i2c_client *new_client; - struct rtc8564_data *d; - unsigned char data[10]; - unsigned char ad[1] = { 0 }; - struct i2c_msg ctrl_wr[1] = { - {addr, 0, 2, data} - }; - struct i2c_msg ctrl_rd[2] = { - {addr, 0, 1, ad}, - {addr, I2C_M_RD, 2, data} - }; - - d = kzalloc(sizeof(struct rtc8564_data), GFP_KERNEL); - if (!d) { - ret = -ENOMEM; - goto done; - } - new_client = &d->client; - - strlcpy(new_client->name, "RTC8564", I2C_NAME_SIZE); - i2c_set_clientdata(new_client, d); - new_client->addr = addr; - new_client->adapter = adap; - new_client->driver = &rtc8564_driver; - - _DBG(1, "client=%p", new_client); - - /* init ctrl1 reg */ - data[0] = 0; - data[1] = 0; - ret = i2c_transfer(new_client->adapter, ctrl_wr, 1); - if (ret != 1) { - printk(KERN_INFO "rtc8564: cant init ctrl1\n"); - ret = -ENODEV; - goto done; - } - - /* read back ctrl1 and ctrl2 */ - ret = i2c_transfer(new_client->adapter, ctrl_rd, 2); - if (ret != 2) { - printk(KERN_INFO "rtc8564: cant read ctrl\n"); - ret = -ENODEV; - goto done; - } - - d->ctrl = data[0] | (data[1] << 8); - - _DBG(1, "RTC8564_REG_CTRL1=%02x, RTC8564_REG_CTRL2=%02x", - data[0], data[1]); - - ret = i2c_attach_client(new_client); -done: - if (ret) { - kfree(d); - } - return ret; -} - -static int rtc8564_probe(struct i2c_adapter *adap) -{ - return i2c_probe(adap, &addr_data, rtc8564_attach); -} - -static int rtc8564_detach(struct i2c_client *client) -{ - i2c_detach_client(client); - kfree(i2c_get_clientdata(client)); - return 0; -} - -static int rtc8564_get_datetime(struct i2c_client *client, struct rtc_tm *dt) -{ - int ret = -EIO; - unsigned char buf[15]; - - _DBG(1, "client=%p, dt=%p", client, dt); - - if (!dt) - return -EINVAL; - - memset(buf, 0, sizeof(buf)); - - ret = rtc8564_read(client, 0, buf, 15); - if (ret) - return ret; - - /* century stored in minute alarm reg */ - dt->year = BCD2BIN(buf[RTC8564_REG_YEAR]); - dt->year += 100 * BCD2BIN(buf[RTC8564_REG_AL_MIN] & 0x3f); - dt->mday = BCD2BIN(buf[RTC8564_REG_DAY] & 0x3f); - dt->wday = BCD2BIN(buf[RTC8564_REG_WDAY] & 7); - dt->mon = BCD2BIN(buf[RTC8564_REG_MON_CENT] & 0x1f); - - dt->secs = BCD2BIN(buf[RTC8564_REG_SEC] & 0x7f); - dt->vl = (buf[RTC8564_REG_SEC] & 0x80) == 0x80; - dt->mins = BCD2BIN(buf[RTC8564_REG_MIN] & 0x7f); - dt->hours = BCD2BIN(buf[RTC8564_REG_HR] & 0x3f); - - _DBGRTCTM(2, *dt); - - return 0; -} - -static int -rtc8564_set_datetime(struct i2c_client *client, struct rtc_tm *dt, int datetoo) -{ - int ret, len = 5; - unsigned char buf[15]; - - _DBG(1, "client=%p, dt=%p", client, dt); - - if (!dt) - return -EINVAL; - - _DBGRTCTM(2, *dt); - - buf[RTC8564_REG_CTRL1] = CTRL1(client) | RTC8564_CTRL1_STOP; - buf[RTC8564_REG_CTRL2] = CTRL2(client); - buf[RTC8564_REG_SEC] = BIN2BCD(dt->secs); - buf[RTC8564_REG_MIN] = BIN2BCD(dt->mins); - buf[RTC8564_REG_HR] = BIN2BCD(dt->hours); - - if (datetoo) { - len += 5; - buf[RTC8564_REG_DAY] = BIN2BCD(dt->mday); - buf[RTC8564_REG_WDAY] = BIN2BCD(dt->wday); - buf[RTC8564_REG_MON_CENT] = BIN2BCD(dt->mon) & 0x1f; - /* century stored in minute alarm reg */ - buf[RTC8564_REG_YEAR] = BIN2BCD(dt->year % 100); - buf[RTC8564_REG_AL_MIN] = BIN2BCD(dt->year / 100); - } - - ret = rtc8564_write(client, 0, buf, len); - if (ret) { - _DBG(1, "error writing data! %d", ret); - } - - buf[RTC8564_REG_CTRL1] = CTRL1(client); - ret = rtc8564_write(client, 0, buf, 1); - if (ret) { - _DBG(1, "error writing data! %d", ret); - } - - return ret; -} - -static int rtc8564_get_ctrl(struct i2c_client *client, unsigned int *ctrl) -{ - struct rtc8564_data *data = i2c_get_clientdata(client); - - if (!ctrl) - return -1; - - *ctrl = data->ctrl; - return 0; -} - -static int rtc8564_set_ctrl(struct i2c_client *client, unsigned int *ctrl) -{ - struct rtc8564_data *data = i2c_get_clientdata(client); - unsigned char buf[2]; - - if (!ctrl) - return -1; - - buf[0] = *ctrl & 0xff; - buf[1] = (*ctrl & 0xff00) >> 8; - data->ctrl = *ctrl; - - return rtc8564_write(client, 0, buf, 2); -} - -static int rtc8564_read_mem(struct i2c_client *client, struct mem *mem) -{ - - if (!mem) - return -EINVAL; - - return rtc8564_read(client, mem->loc, mem->data, mem->nr); -} - -static int rtc8564_write_mem(struct i2c_client *client, struct mem *mem) -{ - - if (!mem) - return -EINVAL; - - return rtc8564_write(client, mem->loc, mem->data, mem->nr); -} - -static int -rtc8564_command(struct i2c_client *client, unsigned int cmd, void *arg) -{ - - _DBG(1, "cmd=%d", cmd); - - switch (cmd) { - case RTC_GETDATETIME: - return rtc8564_get_datetime(client, arg); - - case RTC_SETTIME: - return rtc8564_set_datetime(client, arg, 0); - - case RTC_SETDATETIME: - return rtc8564_set_datetime(client, arg, 1); - - case RTC_GETCTRL: - return rtc8564_get_ctrl(client, arg); - - case RTC_SETCTRL: - return rtc8564_set_ctrl(client, arg); - - case MEM_READ: - return rtc8564_read_mem(client, arg); - - case MEM_WRITE: - return rtc8564_write_mem(client, arg); - - default: - return -EINVAL; - } -} - -static struct i2c_driver rtc8564_driver = { - .driver = { - .name = "RTC8564", - }, - .id = I2C_DRIVERID_RTC8564, - .attach_adapter = rtc8564_probe, - .detach_client = rtc8564_detach, - .command = rtc8564_command -}; - -static __init int rtc8564_init(void) -{ - return i2c_add_driver(&rtc8564_driver); -} - -static __exit void rtc8564_exit(void) -{ - i2c_del_driver(&rtc8564_driver); -} - -MODULE_AUTHOR("Stefan Eletzhofer <Stefan.Eletzhofer@eletztrick.de>"); -MODULE_DESCRIPTION("EPSON RTC8564 Driver"); -MODULE_LICENSE("GPL"); - -module_init(rtc8564_init); -module_exit(rtc8564_exit); diff --git a/drivers/i2c/chips/rtc8564.h b/drivers/i2c/chips/rtc8564.h deleted file mode 100644 index e5342d10b8fa..000000000000 --- a/drivers/i2c/chips/rtc8564.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * linux/drivers/i2c/chips/rtc8564.h - * - * Copyright (C) 2002-2004 Stefan Eletzhofer - * - * based on linux/drivers/acron/char/pcf8583.h - * Copyright (C) 2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -struct rtc_tm { - unsigned char secs; - unsigned char mins; - unsigned char hours; - unsigned char mday; - unsigned char mon; - unsigned short year; /* xxxx 4 digits :) */ - unsigned char wday; - unsigned char vl; -}; - -struct mem { - unsigned int loc; - unsigned int nr; - unsigned char *data; -}; - -#define RTC_GETDATETIME 0 -#define RTC_SETTIME 1 -#define RTC_SETDATETIME 2 -#define RTC_GETCTRL 3 -#define RTC_SETCTRL 4 -#define MEM_READ 5 -#define MEM_WRITE 6 - -#define RTC8564_REG_CTRL1 0x0 /* T 0 S 0 | T 0 0 0 */ -#define RTC8564_REG_CTRL2 0x1 /* 0 0 0 TI/TP | AF TF AIE TIE */ -#define RTC8564_REG_SEC 0x2 /* VL 4 2 1 | 8 4 2 1 */ -#define RTC8564_REG_MIN 0x3 /* x 4 2 1 | 8 4 2 1 */ -#define RTC8564_REG_HR 0x4 /* x x 2 1 | 8 4 2 1 */ -#define RTC8564_REG_DAY 0x5 /* x x 2 1 | 8 4 2 1 */ -#define RTC8564_REG_WDAY 0x6 /* x x x x | x 4 2 1 */ -#define RTC8564_REG_MON_CENT 0x7 /* C x x 1 | 8 4 2 1 */ -#define RTC8564_REG_YEAR 0x8 /* 8 4 2 1 | 8 4 2 1 */ -#define RTC8564_REG_AL_MIN 0x9 /* AE 4 2 1 | 8 4 2 1 */ -#define RTC8564_REG_AL_HR 0xa /* AE 4 2 1 | 8 4 2 1 */ -#define RTC8564_REG_AL_DAY 0xb /* AE x 2 1 | 8 4 2 1 */ -#define RTC8564_REG_AL_WDAY 0xc /* AE x x x | x 4 2 1 */ -#define RTC8564_REG_CLKOUT 0xd /* FE x x x | x x FD1 FD0 */ -#define RTC8564_REG_TCTL 0xe /* TE x x x | x x FD1 FD0 */ -#define RTC8564_REG_TIMER 0xf /* 8 bit binary */ - -/* Control reg */ -#define RTC8564_CTRL1_TEST1 (1<<3) -#define RTC8564_CTRL1_STOP (1<<5) -#define RTC8564_CTRL1_TEST2 (1<<7) - -#define RTC8564_CTRL2_TIE (1<<0) -#define RTC8564_CTRL2_AIE (1<<1) -#define RTC8564_CTRL2_TF (1<<2) -#define RTC8564_CTRL2_AF (1<<3) -#define RTC8564_CTRL2_TI_TP (1<<4) - -/* CLKOUT frequencies */ -#define RTC8564_FD_32768HZ (0x0) -#define RTC8564_FD_1024HZ (0x1) -#define RTC8564_FD_32 (0x2) -#define RTC8564_FD_1HZ (0x3) - -/* Timer CTRL */ -#define RTC8564_TD_4096HZ (0x0) -#define RTC8564_TD_64HZ (0x1) -#define RTC8564_TD_1HZ (0x2) -#define RTC8564_TD_1_60HZ (0x3) - -#define I2C_DRIVERID_RTC8564 0xf000 diff --git a/drivers/i2c/chips/x1205.c b/drivers/i2c/chips/x1205.c deleted file mode 100644 index 245fffa92dbd..000000000000 --- a/drivers/i2c/chips/x1205.c +++ /dev/null @@ -1,698 +0,0 @@ -/* - * x1205.c - An i2c driver for the Xicor X1205 RTC - * Copyright 2004 Karen Spearel - * Copyright 2005 Alessandro Zummo - * - * please send all reports to: - * kas11 at tampabay dot rr dot com - * a dot zummo at towertech dot it - * - * based on the other drivers in this same directory. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/i2c.h> -#include <linux/string.h> -#include <linux/bcd.h> -#include <linux/rtc.h> -#include <linux/list.h> - -#include <linux/x1205.h> - -#define DRV_VERSION "0.9.9" - -/* Addresses to scan: none. This chip is located at - * 0x6f and uses a two bytes register addressing. - * Two bytes need to be written to read a single register, - * while most other chips just require one and take the second - * one as the data to be written. To prevent corrupting - * unknown chips, the user must explicitely set the probe parameter. - */ - -static unsigned short normal_i2c[] = { I2C_CLIENT_END }; - -/* Insmod parameters */ -I2C_CLIENT_INSMOD; -I2C_CLIENT_MODULE_PARM(hctosys, - "Set the system time from the hardware clock upon initialization"); - -/* offsets into CCR area */ - -#define CCR_SEC 0 -#define CCR_MIN 1 -#define CCR_HOUR 2 -#define CCR_MDAY 3 -#define CCR_MONTH 4 -#define CCR_YEAR 5 -#define CCR_WDAY 6 -#define CCR_Y2K 7 - -#define X1205_REG_SR 0x3F /* status register */ -#define X1205_REG_Y2K 0x37 -#define X1205_REG_DW 0x36 -#define X1205_REG_YR 0x35 -#define X1205_REG_MO 0x34 -#define X1205_REG_DT 0x33 -#define X1205_REG_HR 0x32 -#define X1205_REG_MN 0x31 -#define X1205_REG_SC 0x30 -#define X1205_REG_DTR 0x13 -#define X1205_REG_ATR 0x12 -#define X1205_REG_INT 0x11 -#define X1205_REG_0 0x10 -#define X1205_REG_Y2K1 0x0F -#define X1205_REG_DWA1 0x0E -#define X1205_REG_YRA1 0x0D -#define X1205_REG_MOA1 0x0C -#define X1205_REG_DTA1 0x0B -#define X1205_REG_HRA1 0x0A -#define X1205_REG_MNA1 0x09 -#define X1205_REG_SCA1 0x08 -#define X1205_REG_Y2K0 0x07 -#define X1205_REG_DWA0 0x06 -#define X1205_REG_YRA0 0x05 -#define X1205_REG_MOA0 0x04 -#define X1205_REG_DTA0 0x03 -#define X1205_REG_HRA0 0x02 -#define X1205_REG_MNA0 0x01 -#define X1205_REG_SCA0 0x00 - -#define X1205_CCR_BASE 0x30 /* Base address of CCR */ -#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */ - -#define X1205_SR_RTCF 0x01 /* Clock failure */ -#define X1205_SR_WEL 0x02 /* Write Enable Latch */ -#define X1205_SR_RWEL 0x04 /* Register Write Enable */ - -#define X1205_DTR_DTR0 0x01 -#define X1205_DTR_DTR1 0x02 -#define X1205_DTR_DTR2 0x04 - -#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */ - -/* Prototypes */ -static int x1205_attach(struct i2c_adapter *adapter); -static int x1205_detach(struct i2c_client *client); -static int x1205_probe(struct i2c_adapter *adapter, int address, int kind); -static int x1205_command(struct i2c_client *client, unsigned int cmd, - void *arg); - -static struct i2c_driver x1205_driver = { - .driver = { - .name = "x1205", - }, - .attach_adapter = &x1205_attach, - .detach_client = &x1205_detach, -}; - -struct x1205_data { - struct i2c_client client; - struct list_head list; - unsigned int epoch; -}; - -static const unsigned char days_in_mo[] = - { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; - -static LIST_HEAD(x1205_clients); - -/* Workaround until the I2C subsytem will allow to send - * commands to a specific client. This function will send the command - * to the first client. - */ -int x1205_do_command(unsigned int cmd, void *arg) -{ - struct list_head *walk; - struct list_head *tmp; - struct x1205_data *data; - - list_for_each_safe(walk, tmp, &x1205_clients) { - data = list_entry(walk, struct x1205_data, list); - return x1205_command(&data->client, cmd, arg); - } - - return -ENODEV; -} - -#define is_leap(year) \ - ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0)) - -/* make sure the rtc_time values are in bounds */ -static int x1205_validate_tm(struct rtc_time *tm) -{ - int year = tm->tm_year + 1900; - - if ((tm->tm_year < 70) || (tm->tm_year > 255)) - return -EINVAL; - - if ((tm->tm_mon > 11) || (tm->tm_mday == 0)) - return -EINVAL; - - if (tm->tm_mday > days_in_mo[tm->tm_mon] - + ((tm->tm_mon == 1) && is_leap(year))) - return -EINVAL; - - if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60)) - return -EINVAL; - - return 0; -} - -/* - * In the routines that deal directly with the x1205 hardware, we use - * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch - * Epoch is initialized as 2000. Time is set to UTC. - */ -static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, - u8 reg_base) -{ - unsigned char dt_addr[2] = { 0, reg_base }; - static unsigned char sr_addr[2] = { 0, X1205_REG_SR }; - - unsigned char buf[8], sr; - - struct i2c_msg msgs[] = { - { client->addr, 0, 2, sr_addr }, /* setup read ptr */ - { client->addr, I2C_M_RD, 1, &sr }, /* read status */ - { client->addr, 0, 2, dt_addr }, /* setup read ptr */ - { client->addr, I2C_M_RD, 8, buf }, /* read date */ - }; - - struct x1205_data *data = i2c_get_clientdata(client); - - /* read status register */ - if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { - dev_err(&client->dev, "%s: read error\n", __FUNCTION__); - return -EIO; - } - - /* check for battery failure */ - if (sr & X1205_SR_RTCF) { - dev_warn(&client->dev, - "Clock had a power failure, you must set the date.\n"); - return -EINVAL; - } - - /* read date registers */ - if ((i2c_transfer(client->adapter, &msgs[2], 2)) != 2) { - dev_err(&client->dev, "%s: read error\n", __FUNCTION__); - return -EIO; - } - - dev_dbg(&client->dev, - "%s: raw read data - sec=%02x, min=%02x, hr=%02x, " - "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n", - __FUNCTION__, - buf[0], buf[1], buf[2], buf[3], - buf[4], buf[5], buf[6], buf[7]); - - tm->tm_sec = BCD2BIN(buf[CCR_SEC]); - tm->tm_min = BCD2BIN(buf[CCR_MIN]); - tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */ - tm->tm_mday = BCD2BIN(buf[CCR_MDAY]); - tm->tm_mon = BCD2BIN(buf[CCR_MONTH]); - data->epoch = BCD2BIN(buf[CCR_Y2K]) * 100; - tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + data->epoch - 1900; - tm->tm_wday = buf[CCR_WDAY]; - - dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " - "mday=%d, mon=%d, year=%d, wday=%d\n", - __FUNCTION__, - tm->tm_sec, tm->tm_min, tm->tm_hour, - tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); - - return 0; -} - -static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, - int datetoo, u8 reg_base) -{ - int i, err, xfer; - - unsigned char buf[8]; - - static const unsigned char wel[3] = { 0, X1205_REG_SR, - X1205_SR_WEL }; - - static const unsigned char rwel[3] = { 0, X1205_REG_SR, - X1205_SR_WEL | X1205_SR_RWEL }; - - static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 }; - - struct x1205_data *data = i2c_get_clientdata(client); - - /* check if all values in the tm struct are correct */ - if ((err = x1205_validate_tm(tm)) < 0) - return err; - - dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " - "mday=%d, mon=%d, year=%d, wday=%d\n", - __FUNCTION__, - tm->tm_sec, tm->tm_min, tm->tm_hour, - tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); - - buf[CCR_SEC] = BIN2BCD(tm->tm_sec); - buf[CCR_MIN] = BIN2BCD(tm->tm_min); - - /* set hour and 24hr bit */ - buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL; - - /* should we also set the date? */ - if (datetoo) { - buf[CCR_MDAY] = BIN2BCD(tm->tm_mday); - - /* month, 0 - 11 */ - buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); - - /* year, since 1900 */ - buf[CCR_YEAR] = BIN2BCD(tm->tm_year + 1900 - data->epoch); - buf[CCR_WDAY] = tm->tm_wday & 0x07; - buf[CCR_Y2K] = BIN2BCD(data->epoch / 100); - } - - /* this sequence is required to unlock the chip */ - xfer = i2c_master_send(client, wel, 3); - if (xfer != 3) { - dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer); - return -EIO; - } - - xfer = i2c_master_send(client, rwel, 3); - if (xfer != 3) { - dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer); - return -EIO; - } - - /* write register's data */ - for (i = 0; i < (datetoo ? 8 : 3); i++) { - unsigned char rdata[3] = { 0, reg_base + i, buf[i] }; - - xfer = i2c_master_send(client, rdata, 3); - if (xfer != 3) { - dev_err(&client->dev, - "%s: xfer=%d addr=%02x, data=%02x\n", - __FUNCTION__, - xfer, rdata[1], rdata[2]); - return -EIO; - } - }; - - /* disable further writes */ - xfer = i2c_master_send(client, diswe, 3); - if (xfer != 3) { - dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer); - return -EIO; - } - - return 0; -} - -static int x1205_get_dtrim(struct i2c_client *client, int *trim) -{ - unsigned char dtr; - static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR }; - - struct i2c_msg msgs[] = { - { client->addr, 0, 2, dtr_addr }, /* setup read ptr */ - { client->addr, I2C_M_RD, 1, &dtr }, /* read dtr */ - }; - - /* read dtr register */ - if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { - dev_err(&client->dev, "%s: read error\n", __FUNCTION__); - return -EIO; - } - - dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr); - - *trim = 0; - - if (dtr & X1205_DTR_DTR0) - *trim += 20; - - if (dtr & X1205_DTR_DTR1) - *trim += 10; - - if (dtr & X1205_DTR_DTR2) - *trim = -*trim; - - return 0; -} - -static int x1205_get_atrim(struct i2c_client *client, int *trim) -{ - s8 atr; - static unsigned char atr_addr[2] = { 0, X1205_REG_ATR }; - - struct i2c_msg msgs[] = { - { client->addr, 0, 2, atr_addr }, /* setup read ptr */ - { client->addr, I2C_M_RD, 1, &atr }, /* read atr */ - }; - - /* read atr register */ - if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { - dev_err(&client->dev, "%s: read error\n", __FUNCTION__); - return -EIO; - } - - dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr); - - /* atr is a two's complement value on 6 bits, - * perform sign extension. The formula is - * Catr = (atr * 0.25pF) + 11.00pF. - */ - if (atr & 0x20) - atr |= 0xC0; - - dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr); - - *trim = (atr * 250) + 11000; - - dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim); - - return 0; -} - -static int x1205_hctosys(struct i2c_client *client) -{ - int err; - - struct rtc_time tm; - struct timespec tv; - - err = x1205_command(client, X1205_CMD_GETDATETIME, &tm); - - if (err) { - dev_err(&client->dev, - "Unable to set the system clock\n"); - return err; - } - - /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary - * whether it stores the most close value or the value with partial - * seconds truncated. However, it is important that we use it to store - * the truncated value. This is because otherwise it is necessary, - * in an rtc sync function, to read both xtime.tv_sec and - * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read - * of >32bits is not possible. So storing the most close value would - * slow down the sync API. So here we have the truncated value and - * the best guess is to add 0.5s. - */ - - tv.tv_nsec = NSEC_PER_SEC >> 1; - - /* WARNING: this is not the C library 'mktime' call, it is a built in - * inline function from include/linux/time.h. It expects (requires) - * the month to be in the range 1-12 - */ - - tv.tv_sec = mktime(tm.tm_year + 1900, tm.tm_mon + 1, - tm.tm_mday, tm.tm_hour, - tm.tm_min, tm.tm_sec); - - do_settimeofday(&tv); - - dev_info(&client->dev, - "setting the system clock to %d-%d-%d %d:%d:%d\n", - tm.tm_year + 1900, tm.tm_mon + 1, - tm.tm_mday, tm.tm_hour, tm.tm_min, - tm.tm_sec); - - return 0; -} - -struct x1205_limit -{ - unsigned char reg; - unsigned char mask; - unsigned char min; - unsigned char max; -}; - -static int x1205_validate_client(struct i2c_client *client) -{ - int i, xfer; - - /* Probe array. We will read the register at the specified - * address and check if the given bits are zero. - */ - static const unsigned char probe_zero_pattern[] = { - /* register, mask */ - X1205_REG_SR, 0x18, - X1205_REG_DTR, 0xF8, - X1205_REG_ATR, 0xC0, - X1205_REG_INT, 0x18, - X1205_REG_0, 0xFF, - }; - - static const struct x1205_limit probe_limits_pattern[] = { - /* register, mask, min, max */ - { X1205_REG_Y2K, 0xFF, 19, 20 }, - { X1205_REG_DW, 0xFF, 0, 6 }, - { X1205_REG_YR, 0xFF, 0, 99 }, - { X1205_REG_MO, 0xFF, 0, 12 }, - { X1205_REG_DT, 0xFF, 0, 31 }, - { X1205_REG_HR, 0x7F, 0, 23 }, - { X1205_REG_MN, 0xFF, 0, 59 }, - { X1205_REG_SC, 0xFF, 0, 59 }, - { X1205_REG_Y2K1, 0xFF, 19, 20 }, - { X1205_REG_Y2K0, 0xFF, 19, 20 }, - }; - - /* check that registers have bits a 0 where expected */ - for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) { - unsigned char buf; - - unsigned char addr[2] = { 0, probe_zero_pattern[i] }; - - struct i2c_msg msgs[2] = { - { client->addr, 0, 2, addr }, - { client->addr, I2C_M_RD, 1, &buf }, - }; - - xfer = i2c_transfer(client->adapter, msgs, 2); - if (xfer != 2) { - dev_err(&client->adapter->dev, - "%s: could not read register %x\n", - __FUNCTION__, addr[1]); - - return -EIO; - } - - if ((buf & probe_zero_pattern[i+1]) != 0) { - dev_err(&client->adapter->dev, - "%s: register=%02x, zero pattern=%d, value=%x\n", - __FUNCTION__, addr[1], i, buf); - - return -ENODEV; - } - } - - /* check limits (only registers with bcd values) */ - for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) { - unsigned char reg, value; - - unsigned char addr[2] = { 0, probe_limits_pattern[i].reg }; - - struct i2c_msg msgs[2] = { - { client->addr, 0, 2, addr }, - { client->addr, I2C_M_RD, 1, ® }, - }; - - xfer = i2c_transfer(client->adapter, msgs, 2); - - if (xfer != 2) { - dev_err(&client->adapter->dev, - "%s: could not read register %x\n", - __FUNCTION__, addr[1]); - - return -EIO; - } - - value = BCD2BIN(reg & probe_limits_pattern[i].mask); - - if (value > probe_limits_pattern[i].max || - value < probe_limits_pattern[i].min) { - dev_dbg(&client->adapter->dev, - "%s: register=%x, lim pattern=%d, value=%d\n", - __FUNCTION__, addr[1], i, value); - - return -ENODEV; - } - } - - return 0; -} - -static int x1205_attach(struct i2c_adapter *adapter) -{ - dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); - - return i2c_probe(adapter, &addr_data, x1205_probe); -} - -int x1205_direct_attach(int adapter_id, - struct i2c_client_address_data *address_data) -{ - int err; - struct i2c_adapter *adapter = i2c_get_adapter(adapter_id); - - if (adapter) { - err = i2c_probe(adapter, - address_data, x1205_probe); - - i2c_put_adapter(adapter); - - return err; - } - - return -ENODEV; -} - -static int x1205_probe(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *client; - struct x1205_data *data; - - int err = 0; - - dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); - - if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { - err = -ENODEV; - goto exit; - } - - if (!(data = kzalloc(sizeof(struct x1205_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - /* Initialize our structures */ - data->epoch = 2000; - - client = &data->client; - client->addr = address; - client->driver = &x1205_driver; - client->adapter = adapter; - - strlcpy(client->name, "x1205", I2C_NAME_SIZE); - - i2c_set_clientdata(client, data); - - /* Verify the chip is really an X1205 */ - if (kind < 0) { - if (x1205_validate_client(client) < 0) { - err = -ENODEV; - goto exit_kfree; - } - } - - /* Inform the i2c layer */ - if ((err = i2c_attach_client(client))) - goto exit_kfree; - - list_add(&data->list, &x1205_clients); - - dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); - - /* If requested, set the system time */ - if (hctosys) - x1205_hctosys(client); - - return 0; - -exit_kfree: - kfree(data); - -exit: - return err; -} - -static int x1205_detach(struct i2c_client *client) -{ - int err; - struct x1205_data *data = i2c_get_clientdata(client); - - dev_dbg(&client->dev, "%s\n", __FUNCTION__); - - if ((err = i2c_detach_client(client))) - return err; - - list_del(&data->list); - - kfree(data); - - return 0; -} - -static int x1205_command(struct i2c_client *client, unsigned int cmd, - void *param) -{ - if (param == NULL) - return -EINVAL; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - dev_dbg(&client->dev, "%s: cmd=%d\n", __FUNCTION__, cmd); - - switch (cmd) { - case X1205_CMD_GETDATETIME: - return x1205_get_datetime(client, param, X1205_CCR_BASE); - - case X1205_CMD_SETTIME: - return x1205_set_datetime(client, param, 0, - X1205_CCR_BASE); - - case X1205_CMD_SETDATETIME: - return x1205_set_datetime(client, param, 1, - X1205_CCR_BASE); - - case X1205_CMD_GETALARM: - return x1205_get_datetime(client, param, X1205_ALM0_BASE); - - case X1205_CMD_SETALARM: - return x1205_set_datetime(client, param, 1, - X1205_ALM0_BASE); - - case X1205_CMD_GETDTRIM: - return x1205_get_dtrim(client, param); - - case X1205_CMD_GETATRIM: - return x1205_get_atrim(client, param); - - default: - return -EINVAL; - } -} - -static int __init x1205_init(void) -{ - return i2c_add_driver(&x1205_driver); -} - -static void __exit x1205_exit(void) -{ - i2c_del_driver(&x1205_driver); -} - -MODULE_AUTHOR( - "Karen Spearel <kas11@tampabay.rr.com>, " - "Alessandro Zummo <a.zummo@towertech.it>"); -MODULE_DESCRIPTION("Xicor X1205 RTC driver"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(DRV_VERSION); - -EXPORT_SYMBOL_GPL(x1205_do_command); -EXPORT_SYMBOL_GPL(x1205_direct_attach); - -module_init(x1205_init); -module_exit(x1205_exit); |