summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/Kconfig4
-rw-r--r--drivers/i2c/busses/Kconfig11
-rw-r--r--drivers/i2c/busses/i2c-bcm2835.c3
-rw-r--r--drivers/i2c/busses/i2c-brcmstb.c3
-rw-r--r--drivers/i2c/busses/i2c-designware-core.c2
-rw-r--r--drivers/i2c/busses/i2c-designware-core.h1
-rw-r--r--drivers/i2c/busses/i2c-designware-pcidrv.c143
-rw-r--r--drivers/i2c/busses/i2c-efm32.c2
-rw-r--r--drivers/i2c/busses/i2c-elektor.c14
-rw-r--r--drivers/i2c/busses/i2c-i801.c152
-rw-r--r--drivers/i2c/busses/i2c-jz4780.c4
-rw-r--r--drivers/i2c/busses/i2c-pca-isa.c15
-rw-r--r--drivers/i2c/busses/i2c-qup.c155
-rw-r--r--drivers/i2c/busses/i2c-rk3x.c498
-rw-r--r--drivers/i2c/busses/i2c-robotfuzz-osif.c2
-rw-r--r--drivers/i2c/busses/i2c-versatile.c46
-rw-r--r--drivers/i2c/busses/i2c-xlp9xx.c13
-rw-r--r--drivers/i2c/i2c-core.c165
-rw-r--r--drivers/i2c/i2c-dev.c7
-rw-r--r--drivers/i2c/i2c-smbus.c112
20 files changed, 976 insertions, 376 deletions
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 78fbee463628..d223650a97e4 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -88,8 +88,8 @@ config I2C_SMBUS
tristate "SMBus-specific protocols" if !I2C_HELPER_AUTO
help
Say Y here if you want support for SMBus extensions to the I2C
- specification. At the moment, the only supported extension is
- the SMBus alert protocol.
+ specification. At the moment, two extensions are supported:
+ the SMBus Alert protocol and the SMBus Host Notify protocol.
This support is also available as a module. If so, the module
will be called i2c-smbus.
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index f167021b8c21..5c3993b26129 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -91,6 +91,7 @@ config I2C_I801
tristate "Intel 82801 (ICH/PCH)"
depends on PCI
select CHECK_SIGNATURE if X86 && DMI
+ select I2C_SMBUS
help
If you say yes to this option, support will be included for the Intel
801 family of mainboard I2C interfaces. Specifically, the following
@@ -397,7 +398,7 @@ config I2C_BCM_KONA
config I2C_BRCMSTB
tristate "BRCM Settop I2C controller"
- depends on ARCH_BRCMSTB || COMPILE_TEST
+ depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
default y
help
If you say yes to this option, support will be included for the
@@ -490,7 +491,9 @@ config I2C_DESIGNWARE_PCI
config I2C_DESIGNWARE_BAYTRAIL
bool "Intel Baytrail I2C semaphore support"
- depends on I2C_DESIGNWARE_PLATFORM && IOSF_MBI=y && ACPI
+ depends on ACPI
+ depends on (I2C_DESIGNWARE_PLATFORM=m && IOSF_MBI) || \
+ (I2C_DESIGNWARE_PLATFORM=y && IOSF_MBI=y)
help
This driver enables managed host access to the PMIC I2C bus on select
Intel BayTrail platforms using the X-Powers AXP288 PMIC. It allows
@@ -635,7 +638,7 @@ config I2C_LPC2K
config I2C_MESON
tristate "Amlogic Meson I2C controller"
- depends on ARCH_MESON
+ depends on ARCH_MESON || COMPILE_TEST
help
If you say yes to this option, support will be included for the
I2C interface on the Amlogic Meson family of SoCs.
@@ -924,7 +927,7 @@ config I2C_UNIPHIER_F
config I2C_VERSATILE
tristate "ARM Versatile/Realview I2C bus support"
- depends on ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS
+ depends on ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS || COMPILE_TEST
select I2C_ALGOBIT
help
Say yes if you want to support the I2C serial bus on ARMs Versatile
diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index 818b051d25e6..d4f3239b5686 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -253,7 +253,8 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(i2c_dev->clk)) {
- dev_err(&pdev->dev, "Could not get clock\n");
+ if (PTR_ERR(i2c_dev->clk) != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Could not get clock\n");
return PTR_ERR(i2c_dev->clk);
}
diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c
index 6a8cfc1344b2..3f5a4d71d3bf 100644
--- a/drivers/i2c/busses/i2c-brcmstb.c
+++ b/drivers/i2c/busses/i2c-brcmstb.c
@@ -343,10 +343,9 @@ static int brcmstb_i2c_xfer_bsc_data(struct brcmstb_i2c_dev *dev,
struct bsc_regs *pi2creg = dev->bsc_regmap;
int no_ack = pmsg->flags & I2C_M_IGNORE_NAK;
int data_regsz = brcmstb_i2c_get_data_regsz(dev);
- int xfersz = brcmstb_i2c_get_xfersz(dev);
/* see if the transaction needs to check NACK conditions */
- if (no_ack || len <= xfersz) {
+ if (no_ack) {
cmd = (pmsg->flags & I2C_M_RD) ? CMD_RD_NOACK
: CMD_WR_NOACK;
pi2creg->ctlhi_reg |= BSC_CTLHI_REG_IGNORE_ACK_MASK;
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 99b54be6ba73..c6922b806fb7 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -663,7 +663,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
i2c_dw_xfer_init(dev);
/* wait for tx to complete */
- if (!wait_for_completion_timeout(&dev->cmd_complete, HZ)) {
+ if (!wait_for_completion_timeout(&dev->cmd_complete, adap->timeout)) {
dev_err(dev->dev, "controller timed out\n");
/* i2c_dw_init implicitly disables the adapter */
i2c_dw_init(dev);
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index cd409e7fbc71..38493a7142ad 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -26,6 +26,7 @@
#define DW_IC_CON_MASTER 0x1
#define DW_IC_CON_SPEED_STD 0x2
#define DW_IC_CON_SPEED_FAST 0x4
+#define DW_IC_CON_SPEED_MASK 0x6
#define DW_IC_CON_10BITADDR_MASTER 0x10
#define DW_IC_CON_RESTART_EN 0x20
#define DW_IC_CON_SLAVE_DISABLE 0x40
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 7368be000c96..96f8230cd2d3 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -6,7 +6,7 @@
* Copyright (C) 2006 Texas Instruments.
* Copyright (C) 2007 MontaVista Software Inc.
* Copyright (C) 2009 Provigent Ltd.
- * Copyright (C) 2011, 2015 Intel Corporation.
+ * Copyright (C) 2011, 2015, 2016 Intel Corporation.
*
* ----------------------------------------------------------------------------
*
@@ -23,31 +23,27 @@
*
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/acpi.h>
#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/io.h>
-#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/pci.h>
#include <linux/pm_runtime.h>
-#include <linux/acpi.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
#include "i2c-designware-core.h"
#define DRIVER_NAME "i2c-designware-pci"
enum dw_pci_ctl_id_t {
- medfield_0,
- medfield_1,
- medfield_2,
- medfield_3,
- medfield_4,
- medfield_5,
-
+ medfield,
+ merrifield,
baytrail,
haswell,
};
@@ -68,6 +64,7 @@ struct dw_pci_controller {
u32 clk_khz;
u32 functionality;
struct dw_scl_sda_cfg *scl_sda_cfg;
+ int (*setup)(struct pci_dev *pdev, struct dw_pci_controller *c);
};
#define INTEL_MID_STD_CFG (DW_IC_CON_MASTER | \
@@ -80,6 +77,14 @@ struct dw_pci_controller {
I2C_FUNC_SMBUS_WORD_DATA | \
I2C_FUNC_SMBUS_I2C_BLOCK)
+/* Merrifield HCNT/LCNT/SDA hold time */
+static struct dw_scl_sda_cfg mrfld_config = {
+ .ss_hcnt = 0x2f8,
+ .fs_hcnt = 0x87,
+ .ss_lcnt = 0x37b,
+ .fs_lcnt = 0x10a,
+};
+
/* BayTrail HCNT/LCNT/SDA hold time */
static struct dw_scl_sda_cfg byt_config = {
.ss_hcnt = 0x200,
@@ -98,48 +103,60 @@ static struct dw_scl_sda_cfg hsw_config = {
.sda_hold = 0x9,
};
+static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
+{
+ switch (pdev->device) {
+ case 0x0817:
+ c->bus_cfg &= ~DW_IC_CON_SPEED_MASK;
+ c->bus_cfg |= DW_IC_CON_SPEED_STD;
+ case 0x0818:
+ case 0x0819:
+ c->bus_num = pdev->device - 0x817 + 3;
+ return 0;
+ case 0x082C:
+ case 0x082D:
+ case 0x082E:
+ c->bus_num = pdev->device - 0x82C + 0;
+ return 0;
+ }
+ return -ENODEV;
+}
+
+static int mrfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
+{
+ /*
+ * On Intel Merrifield the user visible i2c busses are enumerated
+ * [1..7]. So, we add 1 to shift the default range. Besides that the
+ * first PCI slot provides 4 functions, that's why we have to add 0 to
+ * the first slot and 4 to the next one.
+ */
+ switch (PCI_SLOT(pdev->devfn)) {
+ case 8:
+ c->bus_num = PCI_FUNC(pdev->devfn) + 0 + 1;
+ return 0;
+ case 9:
+ c->bus_num = PCI_FUNC(pdev->devfn) + 4 + 1;
+ return 0;
+ }
+ return -ENODEV;
+}
+
static struct dw_pci_controller dw_pci_controllers[] = {
- [medfield_0] = {
- .bus_num = 0,
- .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
- .tx_fifo_depth = 32,
- .rx_fifo_depth = 32,
- .clk_khz = 25000,
- },
- [medfield_1] = {
- .bus_num = 1,
- .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
- .tx_fifo_depth = 32,
- .rx_fifo_depth = 32,
- .clk_khz = 25000,
- },
- [medfield_2] = {
- .bus_num = 2,
- .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
- .tx_fifo_depth = 32,
- .rx_fifo_depth = 32,
- .clk_khz = 25000,
- },
- [medfield_3] = {
- .bus_num = 3,
- .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_STD,
- .tx_fifo_depth = 32,
- .rx_fifo_depth = 32,
- .clk_khz = 25000,
- },
- [medfield_4] = {
- .bus_num = 4,
+ [medfield] = {
+ .bus_num = -1,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
.clk_khz = 25000,
+ .setup = mfld_setup,
},
- [medfield_5] = {
- .bus_num = 5,
- .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
- .tx_fifo_depth = 32,
- .rx_fifo_depth = 32,
- .clk_khz = 25000,
+ [merrifield] = {
+ .bus_num = -1,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+ .tx_fifo_depth = 64,
+ .rx_fifo_depth = 64,
+ .scl_sda_cfg = &mrfld_config,
+ .setup = mrfld_setup,
},
[baytrail] = {
.bus_num = -1,
@@ -190,7 +207,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
struct dw_i2c_dev *dev;
struct i2c_adapter *adap;
int r;
- struct dw_pci_controller *controller;
+ struct dw_pci_controller *controller;
struct dw_scl_sda_cfg *cfg;
if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers)) {
@@ -224,6 +241,13 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
dev->base = pcim_iomap_table(pdev)[0];
dev->dev = &pdev->dev;
dev->irq = pdev->irq;
+
+ if (controller->setup) {
+ r = controller->setup(pdev, controller);
+ if (r)
+ return r;
+ }
+
dev->functionality = controller->functionality |
DW_DEFAULT_FUNCTIONALITY;
@@ -276,12 +300,15 @@ MODULE_ALIAS("i2c_designware-pci");
static const struct pci_device_id i2_designware_pci_ids[] = {
/* Medfield */
- { PCI_VDEVICE(INTEL, 0x0817), medfield_3 },
- { PCI_VDEVICE(INTEL, 0x0818), medfield_4 },
- { PCI_VDEVICE(INTEL, 0x0819), medfield_5 },
- { PCI_VDEVICE(INTEL, 0x082C), medfield_0 },
- { PCI_VDEVICE(INTEL, 0x082D), medfield_1 },
- { PCI_VDEVICE(INTEL, 0x082E), medfield_2 },
+ { PCI_VDEVICE(INTEL, 0x0817), medfield },
+ { PCI_VDEVICE(INTEL, 0x0818), medfield },
+ { PCI_VDEVICE(INTEL, 0x0819), medfield },
+ { PCI_VDEVICE(INTEL, 0x082C), medfield },
+ { PCI_VDEVICE(INTEL, 0x082D), medfield },
+ { PCI_VDEVICE(INTEL, 0x082E), medfield },
+ /* Merrifield */
+ { PCI_VDEVICE(INTEL, 0x1195), merrifield },
+ { PCI_VDEVICE(INTEL, 0x1196), merrifield },
/* Baytrail */
{ PCI_VDEVICE(INTEL, 0x0F41), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F42), baytrail },
diff --git a/drivers/i2c/busses/i2c-efm32.c b/drivers/i2c/busses/i2c-efm32.c
index 8eff62738877..e253598d764c 100644
--- a/drivers/i2c/busses/i2c-efm32.c
+++ b/drivers/i2c/busses/i2c-efm32.c
@@ -433,7 +433,7 @@ static int efm32_i2c_probe(struct platform_device *pdev)
ret = request_irq(ddata->irq, efm32_i2c_irq, 0, DRIVER_NAME, ddata);
if (ret < 0) {
dev_err(&pdev->dev, "failed to request irq (%d)\n", ret);
- return ret;
+ goto err_disable_clk;
}
ret = i2c_add_adapter(&ddata->adapter);
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index 92e8c0ce1625..8af62fb3fe41 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -319,16 +319,6 @@ static struct isa_driver i2c_elektor_driver = {
},
};
-static int __init i2c_pcfisa_init(void)
-{
- return isa_register_driver(&i2c_elektor_driver, 1);
-}
-
-static void __exit i2c_pcfisa_exit(void)
-{
- isa_unregister_driver(&i2c_elektor_driver);
-}
-
MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>");
MODULE_DESCRIPTION("I2C-Bus adapter routines for PCF8584 ISA bus adapter");
MODULE_LICENSE("GPL");
@@ -338,6 +328,4 @@ module_param(irq, int, 0);
module_param(clock, int, 0);
module_param(own, int, 0);
module_param(mmapped, int, 0);
-
-module_init(i2c_pcfisa_init);
-module_exit(i2c_pcfisa_exit);
+module_isa_driver(i2c_elektor_driver, 1);
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 4a60ad214747..5ef9b733d153 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -72,6 +72,7 @@
* Block process call transaction no
* I2C block read transaction yes (doesn't use the block buffer)
* Slave mode no
+ * SMBus Host Notify yes
* Interrupt processing yes
*
* See the file Documentation/i2c/busses/i2c-i801 for details.
@@ -86,6 +87,7 @@
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
#include <linux/acpi.h>
#include <linux/io.h>
#include <linux/dmi.h>
@@ -96,8 +98,7 @@
#include <linux/platform_data/itco_wdt.h>
#include <linux/pm_runtime.h>
-#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
- defined CONFIG_DMI
+#if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
#include <linux/gpio.h>
#include <linux/i2c-mux-gpio.h>
#endif
@@ -113,6 +114,10 @@
#define SMBPEC(p) (8 + (p)->smba) /* ICH3 and later */
#define SMBAUXSTS(p) (12 + (p)->smba) /* ICH4 and later */
#define SMBAUXCTL(p) (13 + (p)->smba) /* ICH4 and later */
+#define SMBSLVSTS(p) (16 + (p)->smba) /* ICH3 and later */
+#define SMBSLVCMD(p) (17 + (p)->smba) /* ICH3 and later */
+#define SMBNTFDADD(p) (20 + (p)->smba) /* ICH3 and later */
+#define SMBNTFDDAT(p) (22 + (p)->smba) /* ICH3 and later */
/* PCI Address Constants */
#define SMBBAR 4
@@ -144,6 +149,10 @@
/* TCO configuration bits for TCOCTL */
#define TCOCTL_EN 0x0100
+/* Auxiliary status register bits, ICH4+ only */
+#define SMBAUXSTS_CRCE 1
+#define SMBAUXSTS_STCO 2
+
/* Auxiliary control register bits, ICH4+ only */
#define SMBAUXCTL_CRC 1
#define SMBAUXCTL_E32B 2
@@ -177,6 +186,12 @@
#define SMBHSTSTS_INTR 0x02
#define SMBHSTSTS_HOST_BUSY 0x01
+/* Host Notify Status registers bits */
+#define SMBSLVSTS_HST_NTFY_STS 1
+
+/* Host Notify Command registers bits */
+#define SMBSLVCMD_HST_NTFY_INTREN 0x01
+
#define STATUS_ERROR_FLAGS (SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \
SMBHSTSTS_DEV_ERR)
@@ -239,8 +254,7 @@ struct i801_priv {
int len;
u8 *data;
-#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
- defined CONFIG_DMI
+#if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
const struct i801_mux_config *mux_drvdata;
struct platform_device *mux_pdev;
#endif
@@ -252,13 +266,17 @@ struct i801_priv {
*/
bool acpi_reserved;
struct mutex acpi_lock;
+ struct smbus_host_notify *host_notify;
};
+#define SMBHSTNTFY_SIZE 8
+
#define FEATURE_SMBUS_PEC (1 << 0)
#define FEATURE_BLOCK_BUFFER (1 << 1)
#define FEATURE_BLOCK_PROC (1 << 2)
#define FEATURE_I2C_BLOCK_READ (1 << 3)
#define FEATURE_IRQ (1 << 4)
+#define FEATURE_HOST_NOTIFY (1 << 5)
/* Not really a feature, but it's convenient to handle it as such */
#define FEATURE_IDF (1 << 15)
#define FEATURE_TCO (1 << 16)
@@ -269,6 +287,7 @@ static const char *i801_feature_names[] = {
"Block process call",
"I2C block read",
"Interrupt",
+ "SMBus Host Notify",
};
static unsigned int disable_features;
@@ -277,7 +296,8 @@ MODULE_PARM_DESC(disable_features, "Disable selected driver features:\n"
"\t\t 0x01 disable SMBus PEC\n"
"\t\t 0x02 disable the block buffer\n"
"\t\t 0x08 disable the I2C block read functionality\n"
- "\t\t 0x10 don't use interrupts ");
+ "\t\t 0x10 don't use interrupts\n"
+ "\t\t 0x20 disable SMBus Host Notify ");
/* Make sure the SMBus host is ready to start transmitting.
Return 0 if it is, -EBUSY if it is not. */
@@ -305,6 +325,29 @@ static int i801_check_pre(struct i801_priv *priv)
}
}
+ /*
+ * Clear CRC status if needed.
+ * During normal operation, i801_check_post() takes care
+ * of it after every operation. We do it here only in case
+ * the hardware was already in this state when the driver
+ * started.
+ */
+ if (priv->features & FEATURE_SMBUS_PEC) {
+ status = inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE;
+ if (status) {
+ dev_dbg(&priv->pci_dev->dev,
+ "Clearing aux status flags (%02x)\n", status);
+ outb_p(status, SMBAUXSTS(priv));
+ status = inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE;
+ if (status) {
+ dev_err(&priv->pci_dev->dev,
+ "Failed clearing aux status flags (%02x)\n",
+ status);
+ return -EBUSY;
+ }
+ }
+ }
+
return 0;
}
@@ -348,8 +391,30 @@ static int i801_check_post(struct i801_priv *priv, int status)
dev_err(&priv->pci_dev->dev, "Transaction failed\n");
}
if (status & SMBHSTSTS_DEV_ERR) {
- result = -ENXIO;
- dev_dbg(&priv->pci_dev->dev, "No response\n");
+ /*
+ * This may be a PEC error, check and clear it.
+ *
+ * AUXSTS is handled differently from HSTSTS.
+ * For HSTSTS, i801_isr() or i801_wait_intr()
+ * has already cleared the error bits in hardware,
+ * and we are passed a copy of the original value
+ * in "status".
+ * For AUXSTS, the hardware register is left
+ * for us to handle here.
+ * This is asymmetric, slightly iffy, but safe,
+ * since all this code is serialized and the CRCE
+ * bit is harmless as long as it's cleared before
+ * the next operation.
+ */
+ if ((priv->features & FEATURE_SMBUS_PEC) &&
+ (inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE)) {
+ outb_p(SMBAUXSTS_CRCE, SMBAUXSTS(priv));
+ result = -EBADMSG;
+ dev_dbg(&priv->pci_dev->dev, "PEC error\n");
+ } else {
+ result = -ENXIO;
+ dev_dbg(&priv->pci_dev->dev, "No response\n");
+ }
}
if (status & SMBHSTSTS_BUS_ERR) {
result = -EAGAIN;
@@ -511,8 +576,23 @@ static void i801_isr_byte_done(struct i801_priv *priv)
outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
}
+static irqreturn_t i801_host_notify_isr(struct i801_priv *priv)
+{
+ unsigned short addr;
+ unsigned int data;
+
+ addr = inb_p(SMBNTFDADD(priv)) >> 1;
+ data = inw_p(SMBNTFDDAT(priv));
+
+ i2c_handle_smbus_host_notify(priv->host_notify, addr, data);
+
+ /* clear Host Notify bit and return */
+ outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv));
+ return IRQ_HANDLED;
+}
+
/*
- * There are two kinds of interrupts:
+ * There are three kinds of interrupts:
*
* 1) i801 signals transaction completion with one of these interrupts:
* INTR - Success
@@ -524,6 +604,8 @@ static void i801_isr_byte_done(struct i801_priv *priv)
*
* 2) For byte-by-byte (I2C read/write) transactions, one BYTE_DONE interrupt
* occurs for each byte of a byte-by-byte to prepare the next byte.
+ *
+ * 3) Host Notify interrupts
*/
static irqreturn_t i801_isr(int irq, void *dev_id)
{
@@ -536,6 +618,12 @@ static irqreturn_t i801_isr(int irq, void *dev_id)
if (!(pcists & SMBPCISTS_INTS))
return IRQ_NONE;
+ if (priv->features & FEATURE_HOST_NOTIFY) {
+ status = inb_p(SMBSLVSTS(priv));
+ if (status & SMBSLVSTS_HST_NTFY_STS)
+ return i801_host_notify_isr(priv);
+ }
+
status = inb_p(SMBHSTSTS(priv));
if (status & SMBHSTSTS_BYTE_DONE)
i801_isr_byte_done(priv);
@@ -547,7 +635,7 @@ static irqreturn_t i801_isr(int irq, void *dev_id)
status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS;
if (status) {
outb_p(status, SMBHSTSTS(priv));
- priv->status |= status;
+ priv->status = status;
wake_up(&priv->waitq);
}
@@ -847,7 +935,28 @@ static u32 i801_func(struct i2c_adapter *adapter)
I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
((priv->features & FEATURE_I2C_BLOCK_READ) ?
- I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0);
+ I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0) |
+ ((priv->features & FEATURE_HOST_NOTIFY) ?
+ I2C_FUNC_SMBUS_HOST_NOTIFY : 0);
+}
+
+static int i801_enable_host_notify(struct i2c_adapter *adapter)
+{
+ struct i801_priv *priv = i2c_get_adapdata(adapter);
+
+ if (!(priv->features & FEATURE_HOST_NOTIFY))
+ return -ENOTSUPP;
+
+ if (!priv->host_notify)
+ priv->host_notify = i2c_setup_smbus_host_notify(adapter);
+ if (!priv->host_notify)
+ return -ENOMEM;
+
+ outb_p(SMBSLVCMD_HST_NTFY_INTREN, SMBSLVCMD(priv));
+ /* clear Host Notify bit to allow a new notification */
+ outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv));
+
+ return 0;
}
static const struct i2c_algorithm smbus_algorithm = {
@@ -1022,8 +1131,7 @@ static void __init input_apanel_init(void) {}
static void i801_probe_optional_slaves(struct i801_priv *priv) {}
#endif /* CONFIG_X86 && CONFIG_DMI */
-#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
- defined CONFIG_DMI
+#if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
static struct i801_mux_config i801_mux_config_asus_z8_d12 = {
.gpio_chip = "gpio_ich",
.values = { 0x02, 0x03 },
@@ -1379,6 +1487,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
priv->features |= FEATURE_SMBUS_PEC;
priv->features |= FEATURE_BLOCK_BUFFER;
priv->features |= FEATURE_TCO;
+ priv->features |= FEATURE_HOST_NOTIFY;
break;
case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0:
@@ -1398,6 +1507,8 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
priv->features |= FEATURE_BLOCK_BUFFER;
/* fall through */
case PCI_DEVICE_ID_INTEL_82801CA_3:
+ priv->features |= FEATURE_HOST_NOTIFY;
+ /* fall through */
case PCI_DEVICE_ID_INTEL_82801BA_2:
case PCI_DEVICE_ID_INTEL_82801AB_3:
case PCI_DEVICE_ID_INTEL_82801AA_3:
@@ -1507,6 +1618,15 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
return err;
}
+ /*
+ * Enable Host Notify for chips that supports it.
+ * It is done after i2c_add_adapter() so that we are sure the work queue
+ * is not used if i2c_add_adapter() fails.
+ */
+ err = i801_enable_host_notify(&priv->adapter);
+ if (err && err != -ENOTSUPP)
+ dev_warn(&dev->dev, "Unable to enable SMBus Host Notify\n");
+
i801_probe_optional_slaves(priv);
/* We ignore errors - multiplexing is optional */
i801_add_mux(priv);
@@ -1553,6 +1673,14 @@ static int i801_suspend(struct device *dev)
static int i801_resume(struct device *dev)
{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct i801_priv *priv = pci_get_drvdata(pci_dev);
+ int err;
+
+ err = i801_enable_host_notify(&priv->adapter);
+ if (err && err != -ENOTSUPP)
+ dev_warn(dev, "Unable to enable SMBus Host Notify\n");
+
return 0;
}
#endif
diff --git a/drivers/i2c/busses/i2c-jz4780.c b/drivers/i2c/busses/i2c-jz4780.c
index ba14a863b451..cd9872594fe2 100644
--- a/drivers/i2c/busses/i2c-jz4780.c
+++ b/drivers/i2c/busses/i2c-jz4780.c
@@ -791,10 +791,6 @@ static int jz4780_i2c_probe(struct platform_device *pdev)
jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0x0);
- i2c->cmd = 0;
- memset(i2c->cmd_buf, 0, BUFSIZE);
- memset(i2c->data_buf, 0, BUFSIZE);
-
i2c->irq = platform_get_irq(pdev, 0);
ret = devm_request_irq(&pdev->dev, i2c->irq, jz4780_i2c_irq, 0,
dev_name(&pdev->dev), i2c);
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index e0eb4ca0102e..ba88f17f636c 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -193,23 +193,12 @@ static struct isa_driver pca_isa_driver = {
}
};
-static int __init pca_isa_init(void)
-{
- return isa_register_driver(&pca_isa_driver, 1);
-}
-
-static void __exit pca_isa_exit(void)
-{
- isa_unregister_driver(&pca_isa_driver);
-}
-
MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>");
MODULE_DESCRIPTION("ISA base PCA9564/PCA9665 driver");
MODULE_LICENSE("GPL");
module_param(base, ulong, 0);
MODULE_PARM_DESC(base, "I/O base address");
-
module_param(irq, int, 0);
MODULE_PARM_DESC(irq, "IRQ");
module_param(clock, int, 0);
@@ -220,6 +209,4 @@ MODULE_PARM_DESC(clock, "Clock rate in hertz.\n\t\t"
"\t\t\t\tFast: 100100 - 400099\n"
"\t\t\t\tFast+: 400100 - 10000099\n"
"\t\t\t\tTurbo: Up to 1265800");
-
-module_init(pca_isa_init);
-module_exit(pca_isa_exit);
+module_isa_driver(pca_isa_driver, 1);
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index 041050edd809..501bd15cb78e 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -213,14 +213,16 @@ static irqreturn_t qup_i2c_interrupt(int irq, void *dev)
bus_err &= I2C_STATUS_ERROR_MASK;
qup_err &= QUP_STATUS_ERROR_FLAGS;
- if (qup_err) {
- /* Clear Error interrupt */
+ /* Clear the error bits in QUP_ERROR_FLAGS */
+ if (qup_err)
writel(qup_err, qup->base + QUP_ERROR_FLAGS);
- goto done;
- }
- if (bus_err) {
- /* Clear Error interrupt */
+ /* Clear the error bits in QUP_I2C_STATUS */
+ if (bus_err)
+ writel(bus_err, qup->base + QUP_I2C_STATUS);
+
+ /* Reset the QUP State in case of error */
+ if (qup_err || bus_err) {
writel(QUP_RESET_STATE, qup->base + QUP_STATE);
goto done;
}
@@ -310,6 +312,7 @@ static int qup_i2c_wait_ready(struct qup_i2c_dev *qup, int op, bool val,
u32 opflags;
u32 status;
u32 shift = __ffs(op);
+ int ret = 0;
len *= qup->one_byte_t;
/* timeout after a wait of twice the max time */
@@ -321,18 +324,28 @@ static int qup_i2c_wait_ready(struct qup_i2c_dev *qup, int op, bool val,
if (((opflags & op) >> shift) == val) {
if ((op == QUP_OUT_NOT_EMPTY) && qup->is_last) {
- if (!(status & I2C_STATUS_BUS_ACTIVE))
- return 0;
+ if (!(status & I2C_STATUS_BUS_ACTIVE)) {
+ ret = 0;
+ goto done;
+ }
} else {
- return 0;
+ ret = 0;
+ goto done;
}
}
- if (time_after(jiffies, timeout))
- return -ETIMEDOUT;
-
+ if (time_after(jiffies, timeout)) {
+ ret = -ETIMEDOUT;
+ goto done;
+ }
usleep_range(len, len * 2);
}
+
+done:
+ if (qup->bus_err || qup->qup_err)
+ ret = (qup->bus_err & QUP_I2C_NACK_FLAG) ? -ENXIO : -EIO;
+
+ return ret;
}
static void qup_i2c_set_write_mode_v2(struct qup_i2c_dev *qup,
@@ -585,8 +598,8 @@ static void qup_i2c_bam_cb(void *data)
}
static int qup_sg_set_buf(struct scatterlist *sg, void *buf,
- struct qup_i2c_tag *tg, unsigned int buflen,
- struct qup_i2c_dev *qup, int map, int dir)
+ unsigned int buflen, struct qup_i2c_dev *qup,
+ int dir)
{
int ret;
@@ -595,9 +608,6 @@ static int qup_sg_set_buf(struct scatterlist *sg, void *buf,
if (!ret)
return -EINVAL;
- if (!map)
- sg_dma_address(sg) = tg->addr + ((u8 *)buf - tg->start);
-
return 0;
}
@@ -649,37 +659,37 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
u8 *tags;
while (idx < num) {
- blocks = (msg->len + limit) / limit;
- rem = msg->len % limit;
tx_len = 0, len = 0, i = 0;
qup->is_last = (idx == (num - 1));
qup_i2c_set_blk_data(qup, msg);
+ blocks = qup->blk.count;
+ rem = msg->len - (blocks - 1) * limit;
+
if (msg->flags & I2C_M_RD) {
rx_nents += (blocks * 2) + 1;
tx_nents += 1;
while (qup->blk.pos < blocks) {
- /* length set to '0' implies 256 bytes */
- tlen = (i == (blocks - 1)) ? rem : 0;
+ tlen = (i == (blocks - 1)) ? rem : limit;
tags = &qup->start_tag.start[off + len];
len += qup_i2c_set_tags(tags, qup, msg, 1);
+ qup->blk.data_len -= tlen;
/* scratch buf to read the start and len tags */
ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++],
&qup->brx.tag.start[0],
- &qup->brx.tag,
- 2, qup, 0, 0);
+ 2, qup, DMA_FROM_DEVICE);
if (ret)
return ret;
ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++],
&msg->buf[limit * i],
- NULL, tlen, qup,
- 1, DMA_FROM_DEVICE);
+ tlen, qup,
+ DMA_FROM_DEVICE);
if (ret)
return ret;
@@ -688,7 +698,7 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
}
ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
&qup->start_tag.start[off],
- &qup->start_tag, len, qup, 0, 0);
+ len, qup, DMA_TO_DEVICE);
if (ret)
return ret;
@@ -696,30 +706,28 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
/* scratch buf to read the BAM EOT and FLUSH tags */
ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++],
&qup->brx.tag.start[0],
- &qup->brx.tag, 2,
- qup, 0, 0);
+ 2, qup, DMA_FROM_DEVICE);
if (ret)
return ret;
} else {
tx_nents += (blocks * 2);
while (qup->blk.pos < blocks) {
- tlen = (i == (blocks - 1)) ? rem : 0;
+ tlen = (i == (blocks - 1)) ? rem : limit;
tags = &qup->start_tag.start[off + tx_len];
len = qup_i2c_set_tags(tags, qup, msg, 1);
+ qup->blk.data_len -= tlen;
ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
- tags,
- &qup->start_tag, len,
- qup, 0, 0);
+ tags, len,
+ qup, DMA_TO_DEVICE);
if (ret)
return ret;
tx_len += len;
ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
&msg->buf[limit * i],
- NULL, tlen, qup, 1,
- DMA_TO_DEVICE);
+ tlen, qup, DMA_TO_DEVICE);
if (ret)
return ret;
i++;
@@ -738,8 +746,7 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
QUP_BAM_FLUSH_STOP;
ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
&qup->btx.tag.start[0],
- &qup->btx.tag, len,
- qup, 0, 0);
+ len, qup, DMA_TO_DEVICE);
if (ret)
return ret;
tx_nents += 1;
@@ -801,39 +808,35 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
}
if (ret || qup->bus_err || qup->qup_err) {
- if (qup->bus_err & QUP_I2C_NACK_FLAG) {
- msg--;
- dev_err(qup->dev, "NACK from %x\n", msg->addr);
- ret = -EIO;
+ if (qup_i2c_change_state(qup, QUP_RUN_STATE)) {
+ dev_err(qup->dev, "change to run state timed out");
+ goto desc_err;
+ }
- if (qup_i2c_change_state(qup, QUP_RUN_STATE)) {
- dev_err(qup->dev, "change to run state timed out");
- return ret;
- }
+ if (rx_nents)
+ writel(QUP_BAM_INPUT_EOT,
+ qup->base + QUP_OUT_FIFO_BASE);
- if (rx_nents)
- writel(QUP_BAM_INPUT_EOT,
- qup->base + QUP_OUT_FIFO_BASE);
+ writel(QUP_BAM_FLUSH_STOP, qup->base + QUP_OUT_FIFO_BASE);
- writel(QUP_BAM_FLUSH_STOP,
- qup->base + QUP_OUT_FIFO_BASE);
+ qup_i2c_flush(qup);
- qup_i2c_flush(qup);
+ /* wait for remaining interrupts to occur */
+ if (!wait_for_completion_timeout(&qup->xfer, HZ))
+ dev_err(qup->dev, "flush timed out\n");
- /* wait for remaining interrupts to occur */
- if (!wait_for_completion_timeout(&qup->xfer, HZ))
- dev_err(qup->dev, "flush timed out\n");
+ qup_i2c_rel_dma(qup);
- qup_i2c_rel_dma(qup);
- }
+ ret = (qup->bus_err & QUP_I2C_NACK_FLAG) ? -ENXIO : -EIO;
}
+desc_err:
dma_unmap_sg(qup->dev, qup->btx.sg, tx_nents, DMA_TO_DEVICE);
if (rx_nents)
dma_unmap_sg(qup->dev, qup->brx.sg, rx_nents,
DMA_FROM_DEVICE);
-desc_err:
+
return ret;
}
@@ -849,9 +852,6 @@ static int qup_i2c_bam_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
if (ret)
goto out;
- qup->bus_err = 0;
- qup->qup_err = 0;
-
writel(0, qup->base + QUP_MX_INPUT_CNT);
writel(0, qup->base + QUP_MX_OUTPUT_CNT);
@@ -889,12 +889,8 @@ static int qup_i2c_wait_for_complete(struct qup_i2c_dev *qup,
ret = -ETIMEDOUT;
}
- if (qup->bus_err || qup->qup_err) {
- if (qup->bus_err & QUP_I2C_NACK_FLAG) {
- dev_err(qup->dev, "NACK from %x\n", msg->addr);
- ret = -EIO;
- }
- }
+ if (qup->bus_err || qup->qup_err)
+ ret = (qup->bus_err & QUP_I2C_NACK_FLAG) ? -ENXIO : -EIO;
return ret;
}
@@ -1020,7 +1016,7 @@ static void qup_i2c_issue_read(struct qup_i2c_dev *qup, struct i2c_msg *msg)
{
u32 addr, len, val;
- addr = (msg->addr << 1) | 1;
+ addr = i2c_8bit_addr_from_msg(msg);
/* 0 is used to specify a length 256 (QUP_READ_LIMIT) */
len = (msg->len == QUP_READ_LIMIT) ? 0 : msg->len;
@@ -1186,6 +1182,9 @@ static int qup_i2c_xfer(struct i2c_adapter *adap,
if (ret < 0)
goto out;
+ qup->bus_err = 0;
+ qup->qup_err = 0;
+
writel(1, qup->base + QUP_SW_RESET);
ret = qup_i2c_poll_state(qup, QUP_RESET_STATE);
if (ret)
@@ -1235,6 +1234,9 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap,
struct qup_i2c_dev *qup = i2c_get_adapdata(adap);
int ret, len, idx = 0, use_dma = 0;
+ qup->bus_err = 0;
+ qup->qup_err = 0;
+
ret = pm_runtime_get_sync(qup->dev);
if (ret < 0)
goto out;
@@ -1409,27 +1411,21 @@ static int qup_i2c_probe(struct platform_device *pdev)
/* 2 tag bytes for each block + 5 for start, stop tags */
size = blocks * 2 + 5;
- qup->dpool = dma_pool_create("qup_i2c-dma-pool", &pdev->dev,
- size, 4, 0);
- qup->start_tag.start = dma_pool_alloc(qup->dpool, GFP_KERNEL,
- &qup->start_tag.addr);
+ qup->start_tag.start = devm_kzalloc(&pdev->dev,
+ size, GFP_KERNEL);
if (!qup->start_tag.start) {
ret = -ENOMEM;
goto fail_dma;
}
- qup->brx.tag.start = dma_pool_alloc(qup->dpool,
- GFP_KERNEL,
- &qup->brx.tag.addr);
+ qup->brx.tag.start = devm_kzalloc(&pdev->dev, 2, GFP_KERNEL);
if (!qup->brx.tag.start) {
ret = -ENOMEM;
goto fail_dma;
}
- qup->btx.tag.start = dma_pool_alloc(qup->dpool,
- GFP_KERNEL,
- &qup->btx.tag.addr);
+ qup->btx.tag.start = devm_kzalloc(&pdev->dev, 2, GFP_KERNEL);
if (!qup->btx.tag.start) {
ret = -ENOMEM;
goto fail_dma;
@@ -1568,13 +1564,6 @@ static int qup_i2c_remove(struct platform_device *pdev)
struct qup_i2c_dev *qup = platform_get_drvdata(pdev);
if (qup->is_dma) {
- dma_pool_free(qup->dpool, qup->start_tag.start,
- qup->start_tag.addr);
- dma_pool_free(qup->dpool, qup->brx.tag.start,
- qup->brx.tag.addr);
- dma_pool_free(qup->dpool, qup->btx.tag.start,
- qup->btx.tag.addr);
- dma_pool_destroy(qup->dpool);
dma_release_channel(qup->btx.dma);
dma_release_channel(qup->brx.dma);
}
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 80bed02cd942..2bc8b01153d6 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -58,6 +58,12 @@ enum {
#define REG_CON_LASTACK BIT(5) /* 1: send NACK after last received byte */
#define REG_CON_ACTACK BIT(6) /* 1: stop if NACK is received */
+#define REG_CON_TUNING_MASK GENMASK(15, 8)
+
+#define REG_CON_SDA_CFG(cfg) ((cfg) << 8)
+#define REG_CON_STA_CFG(cfg) ((cfg) << 12)
+#define REG_CON_STO_CFG(cfg) ((cfg) << 14)
+
/* REG_MRXADDR bits */
#define REG_MRXADDR_VALID(x) BIT(24 + (x)) /* [x*8+7:x*8] of MRX[R]ADDR valid */
@@ -75,6 +81,77 @@ enum {
#define WAIT_TIMEOUT 1000 /* ms */
#define DEFAULT_SCL_RATE (100 * 1000) /* Hz */
+/**
+ * struct i2c_spec_values:
+ * @min_hold_start_ns: min hold time (repeated) START condition
+ * @min_low_ns: min LOW period of the SCL clock
+ * @min_high_ns: min HIGH period of the SCL cloc
+ * @min_setup_start_ns: min set-up time for a repeated START conditio
+ * @max_data_hold_ns: max data hold time
+ * @min_data_setup_ns: min data set-up time
+ * @min_setup_stop_ns: min set-up time for STOP condition
+ * @min_hold_buffer_ns: min bus free time between a STOP and
+ * START condition
+ */
+struct i2c_spec_values {
+ unsigned long min_hold_start_ns;
+ unsigned long min_low_ns;
+ unsigned long min_high_ns;
+ unsigned long min_setup_start_ns;
+ unsigned long max_data_hold_ns;
+ unsigned long min_data_setup_ns;
+ unsigned long min_setup_stop_ns;
+ unsigned long min_hold_buffer_ns;
+};
+
+static const struct i2c_spec_values standard_mode_spec = {
+ .min_hold_start_ns = 4000,
+ .min_low_ns = 4700,
+ .min_high_ns = 4000,
+ .min_setup_start_ns = 4700,
+ .max_data_hold_ns = 3450,
+ .min_data_setup_ns = 250,
+ .min_setup_stop_ns = 4000,
+ .min_hold_buffer_ns = 4700,
+};
+
+static const struct i2c_spec_values fast_mode_spec = {
+ .min_hold_start_ns = 600,
+ .min_low_ns = 1300,
+ .min_high_ns = 600,
+ .min_setup_start_ns = 600,
+ .max_data_hold_ns = 900,
+ .min_data_setup_ns = 100,
+ .min_setup_stop_ns = 600,
+ .min_hold_buffer_ns = 1300,
+};
+
+static const struct i2c_spec_values fast_mode_plus_spec = {
+ .min_hold_start_ns = 260,
+ .min_low_ns = 500,
+ .min_high_ns = 260,
+ .min_setup_start_ns = 260,
+ .max_data_hold_ns = 400,
+ .min_data_setup_ns = 50,
+ .min_setup_stop_ns = 260,
+ .min_hold_buffer_ns = 500,
+};
+
+/**
+ * struct rk3x_i2c_calced_timings:
+ * @div_low: Divider output for low
+ * @div_high: Divider output for high
+ * @tuning: Used to adjust setup/hold data time,
+ * setup/hold start time and setup stop time for
+ * v1's calc_timings, the tuning should all be 0
+ * for old hardware anyone using v0's calc_timings.
+ */
+struct rk3x_i2c_calced_timings {
+ unsigned long div_low;
+ unsigned long div_high;
+ unsigned int tuning;
+};
+
enum rk3x_i2c_state {
STATE_IDLE,
STATE_START,
@@ -85,11 +162,35 @@ enum rk3x_i2c_state {
/**
* @grf_offset: offset inside the grf regmap for setting the i2c type
+ * @calc_timings: Callback function for i2c timing information calculated
*/
struct rk3x_i2c_soc_data {
int grf_offset;
+ int (*calc_timings)(unsigned long, struct i2c_timings *,
+ struct rk3x_i2c_calced_timings *);
};
+/**
+ * struct rk3x_i2c - private data of the controller
+ * @adap: corresponding I2C adapter
+ * @dev: device for this controller
+ * @soc_data: related soc data struct
+ * @regs: virtual memory area
+ * @clk: function clk for rk3399 or function & Bus clks for others
+ * @pclk: Bus clk for rk3399
+ * @clk_rate_nb: i2c clk rate change notify
+ * @t: I2C known timing information
+ * @lock: spinlock for the i2c bus
+ * @wait: the waitqueue to wait for i2c transfer
+ * @busy: the condition for the event to wait for
+ * @msg: current i2c message
+ * @addr: addr of i2c slave device
+ * @mode: mode of i2c transfer
+ * @is_last_msg: flag determines whether it is the last msg in this transfer
+ * @state: state of i2c transfer
+ * @processed: byte length which has been send or received
+ * @error: error code for i2c transfer
+ */
struct rk3x_i2c {
struct i2c_adapter adap;
struct device *dev;
@@ -98,6 +199,7 @@ struct rk3x_i2c {
/* Hardware resources */
void __iomem *regs;
struct clk *clk;
+ struct clk *pclk;
struct notifier_block clk_rate_nb;
/* Settings */
@@ -116,7 +218,7 @@ struct rk3x_i2c {
/* I2C state machine */
enum rk3x_i2c_state state;
- unsigned int processed; /* sent/received bytes */
+ unsigned int processed;
int error;
};
@@ -142,13 +244,12 @@ static inline void rk3x_i2c_clean_ipd(struct rk3x_i2c *i2c)
*/
static void rk3x_i2c_start(struct rk3x_i2c *i2c)
{
- u32 val;
+ u32 val = i2c_readl(i2c, REG_CON) & REG_CON_TUNING_MASK;
- rk3x_i2c_clean_ipd(i2c);
i2c_writel(i2c, REG_INT_START, REG_IEN);
/* enable adapter with correct mode, send START condition */
- val = REG_CON_EN | REG_CON_MOD(i2c->mode) | REG_CON_START;
+ val |= REG_CON_EN | REG_CON_MOD(i2c->mode) | REG_CON_START;
/* if we want to react to NACK, set ACTACK bit */
if (!(i2c->msg->flags & I2C_M_IGNORE_NAK))
@@ -189,7 +290,8 @@ static void rk3x_i2c_stop(struct rk3x_i2c *i2c, int error)
* get the intended effect by resetting its internal state
* and issuing an ordinary START.
*/
- i2c_writel(i2c, 0, REG_CON);
+ ctrl = i2c_readl(i2c, REG_CON) & REG_CON_TUNING_MASK;
+ i2c_writel(i2c, ctrl, REG_CON);
/* signal that we are finished with the current msg */
wake_up(&i2c->wait);
@@ -431,26 +533,37 @@ out:
}
/**
+ * Get timing values of I2C specification
+ *
+ * @speed: Desired SCL frequency
+ *
+ * Returns: Matched i2c spec values.
+ */
+static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed)
+{
+ if (speed <= 100000)
+ return &standard_mode_spec;
+ else if (speed <= 400000)
+ return &fast_mode_spec;
+ else
+ return &fast_mode_plus_spec;
+}
+
+/**
* Calculate divider values for desired SCL frequency
*
* @clk_rate: I2C input clock rate
- * @t: Known I2C timing information.
- * @div_low: Divider output for low
- * @div_high: Divider output for high
+ * @t: Known I2C timing information
+ * @t_calc: Caculated rk3x private timings that would be written into regs
*
* Returns: 0 on success, -EINVAL if the goal SCL rate is too slow. In that case
* a best-effort divider value is returned in divs. If the target rate is
* too high, we silently use the highest possible rate.
*/
-static int rk3x_i2c_calc_divs(unsigned long clk_rate,
- struct i2c_timings *t,
- unsigned long *div_low,
- unsigned long *div_high)
+static int rk3x_i2c_v0_calc_timings(unsigned long clk_rate,
+ struct i2c_timings *t,
+ struct rk3x_i2c_calced_timings *t_calc)
{
- unsigned long spec_min_low_ns, spec_min_high_ns;
- unsigned long spec_setup_start, spec_max_data_hold_ns;
- unsigned long data_hold_buffer_ns;
-
unsigned long min_low_ns, min_high_ns;
unsigned long max_low_ns, min_total_ns;
@@ -462,6 +575,8 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate,
unsigned long min_div_for_hold, min_total_div;
unsigned long extra_div, extra_low_div, ideal_low_div;
+ unsigned long data_hold_buffer_ns = 50;
+ const struct i2c_spec_values *spec;
int ret = 0;
/* Only support standard-mode and fast-mode */
@@ -484,22 +599,8 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate,
* This is because the i2c host on Rockchip holds the data line
* for half the low time.
*/
- if (t->bus_freq_hz <= 100000) {
- /* Standard-mode */
- spec_min_low_ns = 4700;
- spec_setup_start = 4700;
- spec_min_high_ns = 4000;
- spec_max_data_hold_ns = 3450;
- data_hold_buffer_ns = 50;
- } else {
- /* Fast-mode */
- spec_min_low_ns = 1300;
- spec_setup_start = 600;
- spec_min_high_ns = 600;
- spec_max_data_hold_ns = 900;
- data_hold_buffer_ns = 50;
- }
- min_high_ns = t->scl_rise_ns + spec_min_high_ns;
+ spec = rk3x_i2c_get_spec(t->bus_freq_hz);
+ min_high_ns = t->scl_rise_ns + spec->min_high_ns;
/*
* Timings for repeated start:
@@ -509,14 +610,14 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate,
* We need to account for those rules in picking our "high" time so
* we meet tSU;STA and tHD;STA times.
*/
- min_high_ns = max(min_high_ns,
- DIV_ROUND_UP((t->scl_rise_ns + spec_setup_start) * 1000, 875));
- min_high_ns = max(min_high_ns,
- DIV_ROUND_UP((t->scl_rise_ns + spec_setup_start +
- t->sda_fall_ns + spec_min_high_ns), 2));
-
- min_low_ns = t->scl_fall_ns + spec_min_low_ns;
- max_low_ns = spec_max_data_hold_ns * 2 - data_hold_buffer_ns;
+ min_high_ns = max(min_high_ns, DIV_ROUND_UP(
+ (t->scl_rise_ns + spec->min_setup_start_ns) * 1000, 875));
+ min_high_ns = max(min_high_ns, DIV_ROUND_UP(
+ (t->scl_rise_ns + spec->min_setup_start_ns + t->sda_fall_ns +
+ spec->min_high_ns), 2));
+
+ min_low_ns = t->scl_fall_ns + spec->min_low_ns;
+ max_low_ns = spec->max_data_hold_ns * 2 - data_hold_buffer_ns;
min_total_ns = min_low_ns + min_high_ns;
/* Adjust to avoid overflow */
@@ -552,8 +653,8 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate,
* Time needed to meet hold requirements is important.
* Just use that.
*/
- *div_low = min_low_div;
- *div_high = min_high_div;
+ t_calc->div_low = min_low_div;
+ t_calc->div_high = min_high_div;
} else {
/*
* We've got to distribute some time among the low and high
@@ -582,25 +683,186 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate,
/* Give low the "ideal" and give high whatever extra is left */
extra_low_div = ideal_low_div - min_low_div;
- *div_low = ideal_low_div;
- *div_high = min_high_div + (extra_div - extra_low_div);
+ t_calc->div_low = ideal_low_div;
+ t_calc->div_high = min_high_div + (extra_div - extra_low_div);
}
/*
* Adjust to the fact that the hardware has an implicit "+1".
* NOTE: Above calculations always produce div_low > 0 and div_high > 0.
*/
- *div_low = *div_low - 1;
- *div_high = *div_high - 1;
+ t_calc->div_low--;
+ t_calc->div_high--;
+
+ /* Maximum divider supported by hw is 0xffff */
+ if (t_calc->div_low > 0xffff) {
+ t_calc->div_low = 0xffff;
+ ret = -EINVAL;
+ }
+
+ if (t_calc->div_high > 0xffff) {
+ t_calc->div_high = 0xffff;
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+/**
+ * Calculate timing values for desired SCL frequency
+ *
+ * @clk_rate: I2C input clock rate
+ * @t: Known I2C timing information
+ * @t_calc: Caculated rk3x private timings that would be written into regs
+ *
+ * Returns: 0 on success, -EINVAL if the goal SCL rate is too slow. In that case
+ * a best-effort divider value is returned in divs. If the target rate is
+ * too high, we silently use the highest possible rate.
+ * The following formulas are v1's method to calculate timings.
+ *
+ * l = divl + 1;
+ * h = divh + 1;
+ * s = sda_update_config + 1;
+ * u = start_setup_config + 1;
+ * p = stop_setup_config + 1;
+ * T = Tclk_i2c;
+ *
+ * tHigh = 8 * h * T;
+ * tLow = 8 * l * T;
+ *
+ * tHD;sda = (l * s + 1) * T;
+ * tSU;sda = [(8 - s) * l + 1] * T;
+ * tI2C = 8 * (l + h) * T;
+ *
+ * tSU;sta = (8h * u + 1) * T;
+ * tHD;sta = [8h * (u + 1) - 1] * T;
+ * tSU;sto = (8h * p + 1) * T;
+ */
+static int rk3x_i2c_v1_calc_timings(unsigned long clk_rate,
+ struct i2c_timings *t,
+ struct rk3x_i2c_calced_timings *t_calc)
+{
+ unsigned long min_low_ns, min_high_ns, min_total_ns;
+ unsigned long min_setup_start_ns, min_setup_data_ns;
+ unsigned long min_setup_stop_ns, max_hold_data_ns;
+
+ unsigned long clk_rate_khz, scl_rate_khz;
+
+ unsigned long min_low_div, min_high_div;
+
+ unsigned long min_div_for_hold, min_total_div;
+ unsigned long extra_div, extra_low_div;
+ unsigned long sda_update_cfg, stp_sta_cfg, stp_sto_cfg;
+
+ const struct i2c_spec_values *spec;
+ int ret = 0;
+
+ /* Support standard-mode, fast-mode and fast-mode plus */
+ if (WARN_ON(t->bus_freq_hz > 1000000))
+ t->bus_freq_hz = 1000000;
+
+ /* prevent scl_rate_khz from becoming 0 */
+ if (WARN_ON(t->bus_freq_hz < 1000))
+ t->bus_freq_hz = 1000;
+
+ /*
+ * min_low_ns: The minimum number of ns we need to hold low to
+ * meet I2C specification, should include fall time.
+ * min_high_ns: The minimum number of ns we need to hold high to
+ * meet I2C specification, should include rise time.
+ */
+ spec = rk3x_i2c_get_spec(t->bus_freq_hz);
+
+ /* calculate min-divh and min-divl */
+ clk_rate_khz = DIV_ROUND_UP(clk_rate, 1000);
+ scl_rate_khz = t->bus_freq_hz / 1000;
+ min_total_div = DIV_ROUND_UP(clk_rate_khz, scl_rate_khz * 8);
+
+ min_high_ns = t->scl_rise_ns + spec->min_high_ns;
+ min_high_div = DIV_ROUND_UP(clk_rate_khz * min_high_ns, 8 * 1000000);
+
+ min_low_ns = t->scl_fall_ns + spec->min_low_ns;
+ min_low_div = DIV_ROUND_UP(clk_rate_khz * min_low_ns, 8 * 1000000);
+
+ /*
+ * Final divh and divl must be greater than 0, otherwise the
+ * hardware would not output the i2c clk.
+ */
+ min_high_div = (min_high_div < 1) ? 2 : min_high_div;
+ min_low_div = (min_low_div < 1) ? 2 : min_low_div;
+
+ /* These are the min dividers needed for min hold times. */
+ min_div_for_hold = (min_low_div + min_high_div);
+ min_total_ns = min_low_ns + min_high_ns;
+
+ /*
+ * This is the maximum divider so we don't go over the maximum.
+ * We don't round up here (we round down) since this is a maximum.
+ */
+ if (min_div_for_hold >= min_total_div) {
+ /*
+ * Time needed to meet hold requirements is important.
+ * Just use that.
+ */
+ t_calc->div_low = min_low_div;
+ t_calc->div_high = min_high_div;
+ } else {
+ /*
+ * We've got to distribute some time among the low and high
+ * so we don't run too fast.
+ * We'll try to split things up by the scale of min_low_div and
+ * min_high_div, biasing slightly towards having a higher div
+ * for low (spend more time low).
+ */
+ extra_div = min_total_div - min_div_for_hold;
+ extra_low_div = DIV_ROUND_UP(min_low_div * extra_div,
+ min_div_for_hold);
+
+ t_calc->div_low = min_low_div + extra_low_div;
+ t_calc->div_high = min_high_div + (extra_div - extra_low_div);
+ }
+
+ /*
+ * calculate sda data hold count by the rules, data_upd_st:3
+ * is a appropriate value to reduce calculated times.
+ */
+ for (sda_update_cfg = 3; sda_update_cfg > 0; sda_update_cfg--) {
+ max_hold_data_ns = DIV_ROUND_UP((sda_update_cfg
+ * (t_calc->div_low) + 1)
+ * 1000000, clk_rate_khz);
+ min_setup_data_ns = DIV_ROUND_UP(((8 - sda_update_cfg)
+ * (t_calc->div_low) + 1)
+ * 1000000, clk_rate_khz);
+ if ((max_hold_data_ns < spec->max_data_hold_ns) &&
+ (min_setup_data_ns > spec->min_data_setup_ns))
+ break;
+ }
+
+ /* calculate setup start config */
+ min_setup_start_ns = t->scl_rise_ns + spec->min_setup_start_ns;
+ stp_sta_cfg = DIV_ROUND_UP(clk_rate_khz * min_setup_start_ns
+ - 1000000, 8 * 1000000 * (t_calc->div_high));
+
+ /* calculate setup stop config */
+ min_setup_stop_ns = t->scl_rise_ns + spec->min_setup_stop_ns;
+ stp_sto_cfg = DIV_ROUND_UP(clk_rate_khz * min_setup_stop_ns
+ - 1000000, 8 * 1000000 * (t_calc->div_high));
+
+ t_calc->tuning = REG_CON_SDA_CFG(--sda_update_cfg) |
+ REG_CON_STA_CFG(--stp_sta_cfg) |
+ REG_CON_STO_CFG(--stp_sto_cfg);
+
+ t_calc->div_low--;
+ t_calc->div_high--;
/* Maximum divider supported by hw is 0xffff */
- if (*div_low > 0xffff) {
- *div_low = 0xffff;
+ if (t_calc->div_low > 0xffff) {
+ t_calc->div_low = 0xffff;
ret = -EINVAL;
}
- if (*div_high > 0xffff) {
- *div_high = 0xffff;
+ if (t_calc->div_high > 0xffff) {
+ t_calc->div_high = 0xffff;
ret = -EINVAL;
}
@@ -610,19 +872,31 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate,
static void rk3x_i2c_adapt_div(struct rk3x_i2c *i2c, unsigned long clk_rate)
{
struct i2c_timings *t = &i2c->t;
- unsigned long div_low, div_high;
+ struct rk3x_i2c_calced_timings calc;
u64 t_low_ns, t_high_ns;
+ unsigned long flags;
+ u32 val;
int ret;
- ret = rk3x_i2c_calc_divs(clk_rate, t, &div_low, &div_high);
+ ret = i2c->soc_data->calc_timings(clk_rate, t, &calc);
WARN_ONCE(ret != 0, "Could not reach SCL freq %u", t->bus_freq_hz);
- clk_enable(i2c->clk);
- i2c_writel(i2c, (div_high << 16) | (div_low & 0xffff), REG_CLKDIV);
- clk_disable(i2c->clk);
+ clk_enable(i2c->pclk);
+
+ spin_lock_irqsave(&i2c->lock, flags);
+ val = i2c_readl(i2c, REG_CON);
+ val &= ~REG_CON_TUNING_MASK;
+ val |= calc.tuning;
+ i2c_writel(i2c, val, REG_CON);
+ i2c_writel(i2c, (calc.div_high << 16) | (calc.div_low & 0xffff),
+ REG_CLKDIV);
+ spin_unlock_irqrestore(&i2c->lock, flags);
+
+ clk_disable(i2c->pclk);
- t_low_ns = div_u64(((u64)div_low + 1) * 8 * 1000000000, clk_rate);
- t_high_ns = div_u64(((u64)div_high + 1) * 8 * 1000000000, clk_rate);
+ t_low_ns = div_u64(((u64)calc.div_low + 1) * 8 * 1000000000, clk_rate);
+ t_high_ns = div_u64(((u64)calc.div_high + 1) * 8 * 1000000000,
+ clk_rate);
dev_dbg(i2c->dev,
"CLK %lukhz, Req %uns, Act low %lluns high %lluns\n",
clk_rate / 1000,
@@ -652,12 +926,17 @@ static int rk3x_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long
{
struct clk_notifier_data *ndata = data;
struct rk3x_i2c *i2c = container_of(nb, struct rk3x_i2c, clk_rate_nb);
- unsigned long div_low, div_high;
+ struct rk3x_i2c_calced_timings calc;
switch (event) {
case PRE_RATE_CHANGE:
- if (rk3x_i2c_calc_divs(ndata->new_rate, &i2c->t,
- &div_low, &div_high) != 0)
+ /*
+ * Try the calculation (but don't store the result) ahead of
+ * time to see if we need to block the clock change. Timings
+ * shouldn't actually take effect until rk3x_i2c_adapt_div().
+ */
+ if (i2c->soc_data->calc_timings(ndata->new_rate, &i2c->t,
+ &calc) != 0)
return NOTIFY_STOP;
/* scale up */
@@ -767,12 +1046,14 @@ static int rk3x_i2c_xfer(struct i2c_adapter *adap,
{
struct rk3x_i2c *i2c = (struct rk3x_i2c *)adap->algo_data;
unsigned long timeout, flags;
+ u32 val;
int ret = 0;
int i;
spin_lock_irqsave(&i2c->lock, flags);
clk_enable(i2c->clk);
+ clk_enable(i2c->pclk);
i2c->is_last_msg = false;
@@ -806,7 +1087,9 @@ static int rk3x_i2c_xfer(struct i2c_adapter *adap,
/* Force a STOP condition without interrupt */
i2c_writel(i2c, 0, REG_IEN);
- i2c_writel(i2c, REG_CON_EN | REG_CON_STOP, REG_CON);
+ val = i2c_readl(i2c, REG_CON) & REG_CON_TUNING_MASK;
+ val |= REG_CON_EN | REG_CON_STOP;
+ i2c_writel(i2c, val, REG_CON);
i2c->state = STATE_IDLE;
@@ -820,7 +1103,9 @@ static int rk3x_i2c_xfer(struct i2c_adapter *adap,
}
}
+ clk_disable(i2c->pclk);
clk_disable(i2c->clk);
+
spin_unlock_irqrestore(&i2c->lock, flags);
return ret < 0 ? ret : num;
@@ -836,17 +1121,52 @@ static const struct i2c_algorithm rk3x_i2c_algorithm = {
.functionality = rk3x_i2c_func,
};
-static struct rk3x_i2c_soc_data soc_data[3] = {
- { .grf_offset = 0x154 }, /* rk3066 */
- { .grf_offset = 0x0a4 }, /* rk3188 */
- { .grf_offset = -1 }, /* no I2C switching needed */
+static const struct rk3x_i2c_soc_data rk3066_soc_data = {
+ .grf_offset = 0x154,
+ .calc_timings = rk3x_i2c_v0_calc_timings,
+};
+
+static const struct rk3x_i2c_soc_data rk3188_soc_data = {
+ .grf_offset = 0x0a4,
+ .calc_timings = rk3x_i2c_v0_calc_timings,
+};
+
+static const struct rk3x_i2c_soc_data rk3228_soc_data = {
+ .grf_offset = -1,
+ .calc_timings = rk3x_i2c_v0_calc_timings,
+};
+
+static const struct rk3x_i2c_soc_data rk3288_soc_data = {
+ .grf_offset = -1,
+ .calc_timings = rk3x_i2c_v0_calc_timings,
+};
+
+static const struct rk3x_i2c_soc_data rk3399_soc_data = {
+ .grf_offset = -1,
+ .calc_timings = rk3x_i2c_v1_calc_timings,
};
static const struct of_device_id rk3x_i2c_match[] = {
- { .compatible = "rockchip,rk3066-i2c", .data = (void *)&soc_data[0] },
- { .compatible = "rockchip,rk3188-i2c", .data = (void *)&soc_data[1] },
- { .compatible = "rockchip,rk3228-i2c", .data = (void *)&soc_data[2] },
- { .compatible = "rockchip,rk3288-i2c", .data = (void *)&soc_data[2] },
+ {
+ .compatible = "rockchip,rk3066-i2c",
+ .data = (void *)&rk3066_soc_data
+ },
+ {
+ .compatible = "rockchip,rk3188-i2c",
+ .data = (void *)&rk3188_soc_data
+ },
+ {
+ .compatible = "rockchip,rk3228-i2c",
+ .data = (void *)&rk3228_soc_data
+ },
+ {
+ .compatible = "rockchip,rk3288-i2c",
+ .data = (void *)&rk3288_soc_data
+ },
+ {
+ .compatible = "rockchip,rk3399-i2c",
+ .data = (void *)&rk3399_soc_data
+ },
{},
};
MODULE_DEVICE_TABLE(of, rk3x_i2c_match);
@@ -886,12 +1206,6 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
spin_lock_init(&i2c->lock);
init_waitqueue_head(&i2c->wait);
- i2c->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(i2c->clk)) {
- dev_err(&pdev->dev, "cannot get clock\n");
- return PTR_ERR(i2c->clk);
- }
-
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
i2c->regs = devm_ioremap_resource(&pdev->dev, mem);
if (IS_ERR(i2c->regs))
@@ -945,17 +1259,44 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, i2c);
+ if (i2c->soc_data->calc_timings == rk3x_i2c_v0_calc_timings) {
+ /* Only one clock to use for bus clock and peripheral clock */
+ i2c->clk = devm_clk_get(&pdev->dev, NULL);
+ i2c->pclk = i2c->clk;
+ } else {
+ i2c->clk = devm_clk_get(&pdev->dev, "i2c");
+ i2c->pclk = devm_clk_get(&pdev->dev, "pclk");
+ }
+
+ if (IS_ERR(i2c->clk)) {
+ ret = PTR_ERR(i2c->clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Can't get bus clk: %d\n", ret);
+ return ret;
+ }
+ if (IS_ERR(i2c->pclk)) {
+ ret = PTR_ERR(i2c->pclk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Can't get periph clk: %d\n", ret);
+ return ret;
+ }
+
ret = clk_prepare(i2c->clk);
if (ret < 0) {
- dev_err(&pdev->dev, "Could not prepare clock\n");
+ dev_err(&pdev->dev, "Can't prepare bus clk: %d\n", ret);
return ret;
}
+ ret = clk_prepare(i2c->pclk);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Can't prepare periph clock: %d\n", ret);
+ goto err_clk;
+ }
i2c->clk_rate_nb.notifier_call = rk3x_i2c_clk_notifier_cb;
ret = clk_notifier_register(i2c->clk, &i2c->clk_rate_nb);
if (ret != 0) {
dev_err(&pdev->dev, "Unable to register clock notifier\n");
- goto err_clk;
+ goto err_pclk;
}
clk_rate = clk_get_rate(i2c->clk);
@@ -973,6 +1314,8 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
err_clk_notifier:
clk_notifier_unregister(i2c->clk, &i2c->clk_rate_nb);
+err_pclk:
+ clk_unprepare(i2c->pclk);
err_clk:
clk_unprepare(i2c->clk);
return ret;
@@ -985,6 +1328,7 @@ static int rk3x_i2c_remove(struct platform_device *pdev)
i2c_del_adapter(&i2c->adap);
clk_notifier_unregister(i2c->clk, &i2c->clk_rate_nb);
+ clk_unprepare(i2c->pclk);
clk_unprepare(i2c->clk);
return 0;
diff --git a/drivers/i2c/busses/i2c-robotfuzz-osif.c b/drivers/i2c/busses/i2c-robotfuzz-osif.c
index ced9c6a308d1..89d8b41b6668 100644
--- a/drivers/i2c/busses/i2c-robotfuzz-osif.c
+++ b/drivers/i2c/busses/i2c-robotfuzz-osif.c
@@ -125,7 +125,7 @@ static struct i2c_algorithm osif_algorithm = {
#define USB_OSIF_VENDOR_ID 0x1964
#define USB_OSIF_PRODUCT_ID 0x0001
-static struct usb_device_id osif_table[] = {
+static const struct usb_device_id osif_table[] = {
{ USB_DEVICE(USB_OSIF_VENDOR_ID, USB_OSIF_PRODUCT_ID) },
{ }
};
diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c
index 240637f01d11..c73d2d22009e 100644
--- a/drivers/i2c/busses/i2c-versatile.c
+++ b/drivers/i2c/busses/i2c-versatile.c
@@ -70,28 +70,14 @@ static int i2c_versatile_probe(struct platform_device *dev)
struct resource *r;
int ret;
+ i2c = devm_kzalloc(&dev->dev, sizeof(struct i2c_versatile), GFP_KERNEL);
+ if (!i2c)
+ return -ENOMEM;
+
r = platform_get_resource(dev, IORESOURCE_MEM, 0);
- if (!r) {
- ret = -EINVAL;
- goto err_out;
- }
-
- if (!request_mem_region(r->start, resource_size(r), "versatile-i2c")) {
- ret = -EBUSY;
- goto err_out;
- }
-
- i2c = kzalloc(sizeof(struct i2c_versatile), GFP_KERNEL);
- if (!i2c) {
- ret = -ENOMEM;
- goto err_release;
- }
-
- i2c->base = ioremap(r->start, resource_size(r));
- if (!i2c->base) {
- ret = -ENOMEM;
- goto err_free;
- }
+ i2c->base = devm_ioremap_resource(&dev->dev, r);
+ if (IS_ERR(i2c->base))
+ return PTR_ERR(i2c->base);
writel(SCL | SDA, i2c->base + I2C_CONTROLS);
@@ -105,18 +91,12 @@ static int i2c_versatile_probe(struct platform_device *dev)
i2c->adap.nr = dev->id;
ret = i2c_bit_add_numbered_bus(&i2c->adap);
- if (ret >= 0) {
- platform_set_drvdata(dev, i2c);
- return 0;
- }
-
- iounmap(i2c->base);
- err_free:
- kfree(i2c);
- err_release:
- release_mem_region(r->start, resource_size(r));
- err_out:
- return ret;
+ if (ret < 0)
+ return ret;
+
+ platform_set_drvdata(dev, i2c);
+
+ return 0;
}
static int i2c_versatile_remove(struct platform_device *dev)
diff --git a/drivers/i2c/busses/i2c-xlp9xx.c b/drivers/i2c/busses/i2c-xlp9xx.c
index c941418f06f5..55a7bef1b2e1 100644
--- a/drivers/i2c/busses/i2c-xlp9xx.c
+++ b/drivers/i2c/busses/i2c-xlp9xx.c
@@ -6,6 +6,7 @@
* warranty of any kind, whether express or implied.
*/
+#include <linux/acpi.h>
#include <linux/completion.h>
#include <linux/i2c.h>
#include <linux/init.h>
@@ -341,11 +342,10 @@ static struct i2c_algorithm xlp9xx_i2c_algo = {
static int xlp9xx_i2c_get_frequency(struct platform_device *pdev,
struct xlp9xx_i2c_dev *priv)
{
- struct device_node *np = pdev->dev.of_node;
u32 freq;
int err;
- err = of_property_read_u32(np, "clock-frequency", &freq);
+ err = device_property_read_u32(&pdev->dev, "clock-frequency", &freq);
if (err) {
freq = XLP9XX_I2C_DEFAULT_FREQ;
dev_dbg(&pdev->dev, "using default frequency %u\n", freq);
@@ -429,12 +429,21 @@ static const struct of_device_id xlp9xx_i2c_of_match[] = {
{ /* sentinel */ },
};
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id xlp9xx_i2c_acpi_ids[] = {
+ {"BRCM9007", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, xlp9xx_i2c_acpi_ids);
+#endif
+
static struct platform_driver xlp9xx_i2c_driver = {
.probe = xlp9xx_i2c_probe,
.remove = xlp9xx_i2c_remove,
.driver = {
.name = "xlp9xx-i2c",
.of_match_table = xlp9xx_i2c_of_match,
+ .acpi_match_table = ACPI_PTR(xlp9xx_i2c_acpi_ids),
},
};
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 74e5aeaf84f9..da3a02ef4a31 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -27,6 +27,8 @@
I2C slave support (c) 2014 by Wolfram Sang <wsa@sang-engineering.com>
*/
+#define pr_fmt(fmt) "i2c-core: " fmt
+
#include <dt-bindings/i2c/i2c.h>
#include <asm/uaccess.h>
#include <linux/acpi.h>
@@ -493,7 +495,8 @@ acpi_i2c_space_handler(u32 function, acpi_physical_address command,
break;
default:
- pr_info("protocol(0x%02x) is not supported.\n", accessor_type);
+ dev_warn(&adapter->dev, "protocol 0x%02x not supported for client 0x%02x\n",
+ accessor_type, client->addr);
ret = AE_BAD_PARAMETER;
goto err;
}
@@ -759,6 +762,47 @@ int i2c_recover_bus(struct i2c_adapter *adap)
}
EXPORT_SYMBOL_GPL(i2c_recover_bus);
+static void i2c_init_recovery(struct i2c_adapter *adap)
+{
+ struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
+ char *err_str;
+
+ if (!bri)
+ return;
+
+ if (!bri->recover_bus) {
+ err_str = "no recover_bus() found";
+ goto err;
+ }
+
+ /* Generic GPIO recovery */
+ if (bri->recover_bus == i2c_generic_gpio_recovery) {
+ if (!gpio_is_valid(bri->scl_gpio)) {
+ err_str = "invalid SCL gpio";
+ goto err;
+ }
+
+ if (gpio_is_valid(bri->sda_gpio))
+ bri->get_sda = get_sda_gpio_value;
+ else
+ bri->get_sda = NULL;
+
+ bri->get_scl = get_scl_gpio_value;
+ bri->set_scl = set_scl_gpio_value;
+ } else if (bri->recover_bus == i2c_generic_scl_recovery) {
+ /* Generic SCL recovery */
+ if (!bri->set_scl || !bri->get_scl) {
+ err_str = "no {get|set}_scl() found";
+ goto err;
+ }
+ }
+
+ return;
+ err:
+ dev_err(&adap->dev, "Not using recovery: %s\n", err_str);
+ adap->bus_recovery_info = NULL;
+}
+
static int i2c_device_probe(struct device *dev)
{
struct i2c_client *client = i2c_verify_client(dev);
@@ -1240,6 +1284,47 @@ struct i2c_client *i2c_new_dummy(struct i2c_adapter *adapter, u16 address)
}
EXPORT_SYMBOL_GPL(i2c_new_dummy);
+/**
+ * i2c_new_secondary_device - Helper to get the instantiated secondary address
+ * and create the associated device
+ * @client: Handle to the primary client
+ * @name: Handle to specify which secondary address to get
+ * @default_addr: Used as a fallback if no secondary address was specified
+ * Context: can sleep
+ *
+ * I2C clients can be composed of multiple I2C slaves bound together in a single
+ * component. The I2C client driver then binds to the master I2C slave and needs
+ * to create I2C dummy clients to communicate with all the other slaves.
+ *
+ * This function creates and returns an I2C dummy client whose I2C address is
+ * retrieved from the platform firmware based on the given slave name. If no
+ * address is specified by the firmware default_addr is used.
+ *
+ * On DT-based platforms the address is retrieved from the "reg" property entry
+ * cell whose "reg-names" value matches the slave name.
+ *
+ * This returns the new i2c client, which should be saved for later use with
+ * i2c_unregister_device(); or NULL to indicate an error.
+ */
+struct i2c_client *i2c_new_secondary_device(struct i2c_client *client,
+ const char *name,
+ u16 default_addr)
+{
+ struct device_node *np = client->dev.of_node;
+ u32 addr = default_addr;
+ int i;
+
+ if (np) {
+ i = of_property_match_string(np, "reg-names", name);
+ if (i >= 0)
+ of_property_read_u32_index(np, "reg", i, &addr);
+ }
+
+ dev_dbg(&client->adapter->dev, "Address for %s : 0x%x\n", name, addr);
+ return i2c_new_dummy(client->adapter, addr);
+}
+EXPORT_SYMBOL_GPL(i2c_new_secondary_device);
+
/* ------------------------------------------------------------------------- */
/* I2C bus adapters -- one roots each I2C or SMBUS segment */
@@ -1608,7 +1693,7 @@ static int __process_new_adapter(struct device_driver *d, void *data)
static int i2c_register_adapter(struct i2c_adapter *adap)
{
- int res = 0;
+ int res = -EINVAL;
/* Can't register until after driver model init */
if (WARN_ON(!is_registered)) {
@@ -1617,15 +1702,12 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
}
/* Sanity checks */
- if (unlikely(adap->name[0] == '\0')) {
- pr_err("i2c-core: Attempt to register an adapter with "
- "no name!\n");
- return -EINVAL;
- }
- if (unlikely(!adap->algo)) {
- pr_err("i2c-core: Attempt to register adapter '%s' with "
- "no algo!\n", adap->name);
- return -EINVAL;
+ if (WARN(!adap->name[0], "i2c adapter has no name"))
+ goto out_list;
+
+ if (!adap->algo) {
+ pr_err("adapter '%s': no algo supplied!\n", adap->name);
+ goto out_list;
}
if (!adap->lock_bus) {
@@ -1647,8 +1729,10 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
adap->dev.bus = &i2c_bus_type;
adap->dev.type = &i2c_adapter_type;
res = device_register(&adap->dev);
- if (res)
+ if (res) {
+ pr_err("adapter '%s': can't register device (%d)\n", adap->name, res);
goto out_list;
+ }
dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
@@ -1664,41 +1748,8 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
"Failed to create compatibility class link\n");
#endif
- /* bus recovery specific initialization */
- if (adap->bus_recovery_info) {
- struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
-
- if (!bri->recover_bus) {
- dev_err(&adap->dev, "No recover_bus() found, not using recovery\n");
- adap->bus_recovery_info = NULL;
- goto exit_recovery;
- }
-
- /* Generic GPIO recovery */
- if (bri->recover_bus == i2c_generic_gpio_recovery) {
- if (!gpio_is_valid(bri->scl_gpio)) {
- dev_err(&adap->dev, "Invalid SCL gpio, not using recovery\n");
- adap->bus_recovery_info = NULL;
- goto exit_recovery;
- }
+ i2c_init_recovery(adap);
- if (gpio_is_valid(bri->sda_gpio))
- bri->get_sda = get_sda_gpio_value;
- else
- bri->get_sda = NULL;
-
- bri->get_scl = get_scl_gpio_value;
- bri->set_scl = set_scl_gpio_value;
- } else if (bri->recover_bus == i2c_generic_scl_recovery) {
- /* Generic SCL recovery */
- if (!bri->set_scl || !bri->get_scl) {
- dev_err(&adap->dev, "No {get|set}_scl() found, not using recovery\n");
- adap->bus_recovery_info = NULL;
- }
- }
- }
-
-exit_recovery:
/* create pre-declared device nodes */
of_i2c_register_devices(adap);
acpi_i2c_register_devices(adap);
@@ -1730,13 +1781,12 @@ out_list:
*/
static int __i2c_add_numbered_adapter(struct i2c_adapter *adap)
{
- int id;
+ int id;
mutex_lock(&core_lock);
- id = idr_alloc(&i2c_adapter_idr, adap, adap->nr, adap->nr + 1,
- GFP_KERNEL);
+ id = idr_alloc(&i2c_adapter_idr, adap, adap->nr, adap->nr + 1, GFP_KERNEL);
mutex_unlock(&core_lock);
- if (id < 0)
+ if (WARN(id < 0, "couldn't get idr"))
return id == -ENOSPC ? -EBUSY : id;
return i2c_register_adapter(adap);
@@ -1773,7 +1823,7 @@ int i2c_add_adapter(struct i2c_adapter *adapter)
id = idr_alloc(&i2c_adapter_idr, adapter,
__i2c_first_dynamic_bus_num, 0, GFP_KERNEL);
mutex_unlock(&core_lock);
- if (id < 0)
+ if (WARN(id < 0, "couldn't get idr"))
return id;
adapter->nr = id;
@@ -1871,8 +1921,7 @@ void i2c_del_adapter(struct i2c_adapter *adap)
found = idr_find(&i2c_adapter_idr, adap->nr);
mutex_unlock(&core_lock);
if (found != adap) {
- pr_debug("i2c-core: attempting to delete unregistered "
- "adapter [%s]\n", adap->name);
+ pr_debug("attempting to delete unregistered adapter [%s]\n", adap->name);
return;
}
@@ -2032,7 +2081,7 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
if (res)
return res;
- pr_debug("i2c-core: driver [%s] registered\n", driver->driver.name);
+ pr_debug("driver [%s] registered\n", driver->driver.name);
INIT_LIST_HEAD(&driver->clients);
/* Walk the adapters that are already present */
@@ -2059,7 +2108,7 @@ void i2c_del_driver(struct i2c_driver *driver)
i2c_for_each_dev(driver, __process_removed_driver);
driver_unregister(&driver->driver);
- pr_debug("i2c-core: driver [%s] unregistered\n", driver->driver.name);
+ pr_debug("driver [%s] unregistered\n", driver->driver.name);
}
EXPORT_SYMBOL(i2c_del_driver);
@@ -2150,8 +2199,8 @@ static int of_i2c_notify(struct notifier_block *nb, unsigned long action,
put_device(&adap->dev);
if (IS_ERR(client)) {
- pr_err("%s: failed to create for '%s'\n",
- __func__, rd->dn->full_name);
+ dev_err(&adap->dev, "failed to create client for '%s'\n",
+ rd->dn->full_name);
return notifier_from_errno(PTR_ERR(client));
}
break;
@@ -2772,7 +2821,7 @@ static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg)
cpec = i2c_smbus_msg_pec(cpec, msg);
if (rpec != cpec) {
- pr_debug("i2c-core: Bad PEC 0x%02x vs. 0x%02x\n",
+ pr_debug("Bad PEC 0x%02x vs. 0x%02x\n",
rpec, cpec);
return -EBADMSG;
}
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 6ecfd76270f2..66f323fd3982 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -485,13 +485,8 @@ static int i2cdev_open(struct inode *inode, struct file *file)
unsigned int minor = iminor(inode);
struct i2c_client *client;
struct i2c_adapter *adap;
- struct i2c_dev *i2c_dev;
-
- i2c_dev = i2c_dev_get_by_minor(minor);
- if (!i2c_dev)
- return -ENODEV;
- adap = i2c_get_adapter(i2c_dev->adap->nr);
+ adap = i2c_get_adapter(minor);
if (!adap)
return -ENODEV;
diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c
index abb55d3e76f3..b0d2679c60d1 100644
--- a/drivers/i2c/i2c-smbus.c
+++ b/drivers/i2c/i2c-smbus.c
@@ -33,7 +33,8 @@ struct i2c_smbus_alert {
struct alert_data {
unsigned short addr;
- u8 flag:1;
+ enum i2c_alert_protocol type;
+ unsigned int data;
};
/* If this is the alerting device, notify its driver */
@@ -56,7 +57,7 @@ static int smbus_do_alert(struct device *dev, void *addrp)
if (client->dev.driver) {
driver = to_i2c_driver(client->dev.driver);
if (driver->alert)
- driver->alert(client, data->flag);
+ driver->alert(client, data->type, data->data);
else
dev_warn(&client->dev, "no driver alert()!\n");
} else
@@ -96,8 +97,9 @@ static void smbus_alert(struct work_struct *work)
if (status < 0)
break;
- data.flag = status & 1;
+ data.data = status & 1;
data.addr = status >> 1;
+ data.type = I2C_PROTOCOL_SMBUS_ALERT;
if (data.addr == prev_addr) {
dev_warn(&ara->dev, "Duplicate SMBALERT# from dev "
@@ -105,7 +107,7 @@ static void smbus_alert(struct work_struct *work)
break;
}
dev_dbg(&ara->dev, "SMBALERT# from dev 0x%02x, flag %d\n",
- data.addr, data.flag);
+ data.addr, data.data);
/* Notify driver for the device which issued the alert */
device_for_each_child(&ara->adapter->dev, &data,
@@ -239,6 +241,108 @@ int i2c_handle_smbus_alert(struct i2c_client *ara)
}
EXPORT_SYMBOL_GPL(i2c_handle_smbus_alert);
+static void smbus_host_notify_work(struct work_struct *work)
+{
+ struct alert_data alert;
+ struct i2c_adapter *adapter;
+ unsigned long flags;
+ u16 payload;
+ u8 addr;
+ struct smbus_host_notify *data;
+
+ data = container_of(work, struct smbus_host_notify, work);
+
+ spin_lock_irqsave(&data->lock, flags);
+ payload = data->payload;
+ addr = data->addr;
+ adapter = data->adapter;
+
+ /* clear the pending bit and release the spinlock */
+ data->pending = false;
+ spin_unlock_irqrestore(&data->lock, flags);
+
+ if (!adapter || !addr)
+ return;
+
+ alert.type = I2C_PROTOCOL_SMBUS_HOST_NOTIFY;
+ alert.addr = addr;
+ alert.data = payload;
+
+ device_for_each_child(&adapter->dev, &alert, smbus_do_alert);
+}
+
+/**
+ * i2c_setup_smbus_host_notify - Allocate a new smbus_host_notify for the given
+ * I2C adapter.
+ * @adapter: the adapter we want to associate a Host Notify function
+ *
+ * Returns a struct smbus_host_notify pointer on success, and NULL on failure.
+ * The resulting smbus_host_notify must not be freed afterwards, it is a
+ * managed resource already.
+ */
+struct smbus_host_notify *i2c_setup_smbus_host_notify(struct i2c_adapter *adap)
+{
+ struct smbus_host_notify *host_notify;
+
+ host_notify = devm_kzalloc(&adap->dev, sizeof(struct smbus_host_notify),
+ GFP_KERNEL);
+ if (!host_notify)
+ return NULL;
+
+ host_notify->adapter = adap;
+
+ spin_lock_init(&host_notify->lock);
+ INIT_WORK(&host_notify->work, smbus_host_notify_work);
+
+ return host_notify;
+}
+EXPORT_SYMBOL_GPL(i2c_setup_smbus_host_notify);
+
+/**
+ * i2c_handle_smbus_host_notify - Forward a Host Notify event to the correct
+ * I2C client.
+ * @host_notify: the struct host_notify attached to the relevant adapter
+ * @addr: the I2C address of the notifying device
+ * @data: the payload of the notification
+ * Context: can't sleep
+ *
+ * Helper function to be called from an I2C bus driver's interrupt
+ * handler. It will schedule the Host Notify work, in turn calling the
+ * corresponding I2C device driver's alert function.
+ *
+ * host_notify should be a valid pointer previously returned by
+ * i2c_setup_smbus_host_notify().
+ */
+int i2c_handle_smbus_host_notify(struct smbus_host_notify *host_notify,
+ unsigned short addr, unsigned int data)
+{
+ unsigned long flags;
+ struct i2c_adapter *adapter;
+
+ if (!host_notify || !host_notify->adapter)
+ return -EINVAL;
+
+ adapter = host_notify->adapter;
+
+ spin_lock_irqsave(&host_notify->lock, flags);
+
+ if (host_notify->pending) {
+ spin_unlock_irqrestore(&host_notify->lock, flags);
+ dev_warn(&adapter->dev, "Host Notify already scheduled.\n");
+ return -EBUSY;
+ }
+
+ host_notify->payload = data;
+ host_notify->addr = addr;
+
+ /* Mark that there is a pending notification and release the lock */
+ host_notify->pending = true;
+ spin_unlock_irqrestore(&host_notify->lock, flags);
+
+ return schedule_work(&host_notify->work);
+}
+EXPORT_SYMBOL_GPL(i2c_handle_smbus_host_notify);
+
module_i2c_driver(smbalert_driver);
MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-03 08:58:17 +0000