diff options
Diffstat (limited to 'drivers/i2c/busses')
-rw-r--r-- | drivers/i2c/busses/i2c-pxa.c | 94 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-sh_mobile.c | 271 |
2 files changed, 285 insertions, 80 deletions
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 44d838410f15..906f9b9d715d 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -38,7 +38,44 @@ #include <asm/irq.h> #include <asm/io.h> #include <mach/i2c.h> -#include <mach/pxa-regs.h> + +/* + * I2C registers and bit definitions + */ +#define IBMR (0x00) +#define IDBR (0x08) +#define ICR (0x10) +#define ISR (0x18) +#define ISAR (0x20) + +#define ICR_START (1 << 0) /* start bit */ +#define ICR_STOP (1 << 1) /* stop bit */ +#define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */ +#define ICR_TB (1 << 3) /* transfer byte bit */ +#define ICR_MA (1 << 4) /* master abort */ +#define ICR_SCLE (1 << 5) /* master clock enable */ +#define ICR_IUE (1 << 6) /* unit enable */ +#define ICR_GCD (1 << 7) /* general call disable */ +#define ICR_ITEIE (1 << 8) /* enable tx interrupts */ +#define ICR_IRFIE (1 << 9) /* enable rx interrupts */ +#define ICR_BEIE (1 << 10) /* enable bus error ints */ +#define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */ +#define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */ +#define ICR_SADIE (1 << 13) /* slave address detected int enable */ +#define ICR_UR (1 << 14) /* unit reset */ +#define ICR_FM (1 << 15) /* fast mode */ + +#define ISR_RWM (1 << 0) /* read/write mode */ +#define ISR_ACKNAK (1 << 1) /* ack/nak status */ +#define ISR_UB (1 << 2) /* unit busy */ +#define ISR_IBB (1 << 3) /* bus busy */ +#define ISR_SSD (1 << 4) /* slave stop detected */ +#define ISR_ALD (1 << 5) /* arbitration loss detected */ +#define ISR_ITE (1 << 6) /* tx buffer empty */ +#define ISR_IRF (1 << 7) /* rx buffer full */ +#define ISR_GCAD (1 << 8) /* general call address detected */ +#define ISR_SAD (1 << 9) /* slave address detected */ +#define ISR_BED (1 << 10) /* bus error no ACK/NAK */ struct pxa_i2c { spinlock_t lock; @@ -60,19 +97,21 @@ struct pxa_i2c { u32 icrlog[32]; void __iomem *reg_base; + unsigned int reg_shift; unsigned long iobase; unsigned long iosize; int irq; - int use_pio; + unsigned int use_pio :1; + unsigned int fast_mode :1; }; -#define _IBMR(i2c) ((i2c)->reg_base + 0) -#define _IDBR(i2c) ((i2c)->reg_base + 8) -#define _ICR(i2c) ((i2c)->reg_base + 0x10) -#define _ISR(i2c) ((i2c)->reg_base + 0x18) -#define _ISAR(i2c) ((i2c)->reg_base + 0x20) +#define _IBMR(i2c) ((i2c)->reg_base + (0x0 << (i2c)->reg_shift)) +#define _IDBR(i2c) ((i2c)->reg_base + (0x4 << (i2c)->reg_shift)) +#define _ICR(i2c) ((i2c)->reg_base + (0x8 << (i2c)->reg_shift)) +#define _ISR(i2c) ((i2c)->reg_base + (0xc << (i2c)->reg_shift)) +#define _ISAR(i2c) ((i2c)->reg_base + (0x10 << (i2c)->reg_shift)) /* * I2C Slave mode address @@ -188,14 +227,14 @@ static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c) static void i2c_pxa_abort(struct pxa_i2c *i2c) { - unsigned long timeout = jiffies + HZ/4; + int i = 250; if (i2c_pxa_is_slavemode(i2c)) { dev_dbg(&i2c->adap.dev, "%s: called in slave mode\n", __func__); return; } - while (time_before(jiffies, timeout) && (readl(_IBMR(i2c)) & 0x1) == 0) { + while ((i > 0) && (readl(_IBMR(i2c)) & 0x1) == 0) { unsigned long icr = readl(_ICR(i2c)); icr &= ~ICR_START; @@ -205,7 +244,8 @@ static void i2c_pxa_abort(struct pxa_i2c *i2c) show_state(i2c); - msleep(1); + mdelay(1); + i --; } writel(readl(_ICR(i2c)) & ~(ICR_MA | ICR_START | ICR_STOP), @@ -364,7 +404,7 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c) writel(i2c->slave_addr, _ISAR(i2c)); /* set control register values */ - writel(I2C_ICR_INIT, _ICR(i2c)); + writel(I2C_ICR_INIT | (i2c->fast_mode ? ICR_FM : 0), _ICR(i2c)); #ifdef CONFIG_I2C_PXA_SLAVE dev_info(&i2c->adap.dev, "Enabling slave mode\n"); @@ -907,12 +947,6 @@ static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num struct pxa_i2c *i2c = adap->algo_data; int ret, i; - /* If the I2C controller is disabled we need to reset it (probably due - to a suspend/resume destroying state). We do this here as we can then - avoid worrying about resuming the controller before its users. */ - if (!(readl(_ICR(i2c)) & ICR_IUE)) - i2c_pxa_reset(i2c); - for (i = adap->retries; i >= 0; i--) { ret = i2c_pxa_do_xfer(i2c, msgs, num); if (ret != I2C_RETRY) @@ -993,6 +1027,7 @@ static int i2c_pxa_probe(struct platform_device *dev) ret = -EIO; goto eremap; } + i2c->reg_shift = (cpu_is_pxa3xx() && (dev->id == 1)) ? 0 : 1; i2c->iobase = res->start; i2c->iosize = res_len(res); @@ -1013,6 +1048,7 @@ static int i2c_pxa_probe(struct platform_device *dev) if (plat) { i2c->adap.class = plat->class; i2c->use_pio = plat->use_pio; + i2c->fast_mode = plat->fast_mode; } if (i2c->use_pio) { @@ -1082,9 +1118,33 @@ static int __exit i2c_pxa_remove(struct platform_device *dev) return 0; } +#ifdef CONFIG_PM +static int i2c_pxa_suspend_late(struct platform_device *dev, pm_message_t state) +{ + struct pxa_i2c *i2c = platform_get_drvdata(dev); + clk_disable(i2c->clk); + return 0; +} + +static int i2c_pxa_resume_early(struct platform_device *dev) +{ + struct pxa_i2c *i2c = platform_get_drvdata(dev); + + clk_enable(i2c->clk); + i2c_pxa_reset(i2c); + + return 0; +} +#else +#define i2c_pxa_suspend_late NULL +#define i2c_pxa_resume_early NULL +#endif + static struct platform_driver i2c_pxa_driver = { .probe = i2c_pxa_probe, .remove = __exit_p(i2c_pxa_remove), + .suspend_late = i2c_pxa_suspend_late, + .resume_early = i2c_pxa_resume_early, .driver = { .name = "pxa2xx-i2c", .owner = THIS_MODULE, diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 840e634fa31f..640cbb237328 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -31,13 +31,84 @@ #include <linux/clk.h> #include <linux/io.h> +/* Transmit operation: */ +/* */ +/* 0 byte transmit */ +/* BUS: S A8 ACK P */ +/* IRQ: DTE WAIT */ +/* ICIC: */ +/* ICCR: 0x94 0x90 */ +/* ICDR: A8 */ +/* */ +/* 1 byte transmit */ +/* BUS: S A8 ACK D8(1) ACK P */ +/* IRQ: DTE WAIT WAIT */ +/* ICIC: -DTE */ +/* ICCR: 0x94 0x90 */ +/* ICDR: A8 D8(1) */ +/* */ +/* 2 byte transmit */ +/* BUS: S A8 ACK D8(1) ACK D8(2) ACK P */ +/* IRQ: DTE WAIT WAIT WAIT */ +/* ICIC: -DTE */ +/* ICCR: 0x94 0x90 */ +/* ICDR: A8 D8(1) D8(2) */ +/* */ +/* 3 bytes or more, +---------+ gets repeated */ +/* */ +/* */ +/* Receive operation: */ +/* */ +/* 0 byte receive - not supported since slave may hold SDA low */ +/* */ +/* 1 byte receive [TX] | [RX] */ +/* BUS: S A8 ACK | D8(1) ACK P */ +/* IRQ: DTE WAIT | WAIT DTE */ +/* ICIC: -DTE | +DTE */ +/* ICCR: 0x94 0x81 | 0xc0 */ +/* ICDR: A8 | D8(1) */ +/* */ +/* 2 byte receive [TX]| [RX] */ +/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK P */ +/* IRQ: DTE WAIT | WAIT WAIT DTE */ +/* ICIC: -DTE | +DTE */ +/* ICCR: 0x94 0x81 | 0xc0 */ +/* ICDR: A8 | D8(1) D8(2) */ +/* */ +/* 3 byte receive [TX] | [RX] */ +/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK D8(3) ACK P */ +/* IRQ: DTE WAIT | WAIT WAIT WAIT DTE */ +/* ICIC: -DTE | +DTE */ +/* ICCR: 0x94 0x81 | 0xc0 */ +/* ICDR: A8 | D8(1) D8(2) D8(3) */ +/* */ +/* 4 bytes or more, this part is repeated +---------+ */ +/* */ +/* */ +/* Interrupt order and BUSY flag */ +/* ___ _ */ +/* SDA ___\___XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXAAAAAAAAA___/ */ +/* SCL \_/1\_/2\_/3\_/4\_/5\_/6\_/7\_/8\___/9\_____/ */ +/* */ +/* S D7 D6 D5 D4 D3 D2 D1 D0 P */ +/* ___ */ +/* WAIT IRQ ________________________________/ \___________ */ +/* TACK IRQ ____________________________________/ \_______ */ +/* DTE IRQ __________________________________________/ \_ */ +/* AL IRQ XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */ +/* _______________________________________________ */ +/* BUSY __/ \_ */ +/* */ + enum sh_mobile_i2c_op { OP_START = 0, - OP_TX_ONLY, + OP_TX_FIRST, + OP_TX, OP_TX_STOP, OP_TX_TO_RX, - OP_RX_ONLY, + OP_RX, OP_RX_STOP, + OP_RX_STOP_DATA, }; struct sh_mobile_i2c_data { @@ -127,25 +198,34 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd, spin_lock_irqsave(&pd->lock, flags); switch (op) { - case OP_START: + case OP_START: /* issue start and trigger DTE interrupt */ iowrite8(0x94, ICCR(pd)); break; - case OP_TX_ONLY: + case OP_TX_FIRST: /* disable DTE interrupt and write data */ + iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE, ICIC(pd)); iowrite8(data, ICDR(pd)); break; - case OP_TX_STOP: + case OP_TX: /* write data */ iowrite8(data, ICDR(pd)); - iowrite8(0x90, ICCR(pd)); - iowrite8(ICIC_ALE | ICIC_TACKE, ICIC(pd)); break; - case OP_TX_TO_RX: + case OP_TX_STOP: /* write data and issue a stop afterwards */ iowrite8(data, ICDR(pd)); + iowrite8(0x90, ICCR(pd)); + break; + case OP_TX_TO_RX: /* select read mode */ iowrite8(0x81, ICCR(pd)); break; - case OP_RX_ONLY: + case OP_RX: /* just read data */ ret = ioread8(ICDR(pd)); break; - case OP_RX_STOP: + case OP_RX_STOP: /* enable DTE interrupt, issue stop */ + iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE, + ICIC(pd)); + iowrite8(0xc0, ICCR(pd)); + break; + case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */ + iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE, + ICIC(pd)); ret = ioread8(ICDR(pd)); iowrite8(0xc0, ICCR(pd)); break; @@ -157,58 +237,120 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd, return ret; } +static int sh_mobile_i2c_is_first_byte(struct sh_mobile_i2c_data *pd) +{ + if (pd->pos == -1) + return 1; + + return 0; +} + +static int sh_mobile_i2c_is_last_byte(struct sh_mobile_i2c_data *pd) +{ + if (pd->pos == (pd->msg->len - 1)) + return 1; + + return 0; +} + +static void sh_mobile_i2c_get_data(struct sh_mobile_i2c_data *pd, + unsigned char *buf) +{ + switch (pd->pos) { + case -1: + *buf = (pd->msg->addr & 0x7f) << 1; + *buf |= (pd->msg->flags & I2C_M_RD) ? 1 : 0; + break; + default: + *buf = pd->msg->buf[pd->pos]; + } +} + +static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd) +{ + unsigned char data; + + if (pd->pos == pd->msg->len) + return 1; + + sh_mobile_i2c_get_data(pd, &data); + + if (sh_mobile_i2c_is_last_byte(pd)) + i2c_op(pd, OP_TX_STOP, data); + else if (sh_mobile_i2c_is_first_byte(pd)) + i2c_op(pd, OP_TX_FIRST, data); + else + i2c_op(pd, OP_TX, data); + + pd->pos++; + return 0; +} + +static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd) +{ + unsigned char data; + int real_pos; + + do { + if (pd->pos <= -1) { + sh_mobile_i2c_get_data(pd, &data); + + if (sh_mobile_i2c_is_first_byte(pd)) + i2c_op(pd, OP_TX_FIRST, data); + else + i2c_op(pd, OP_TX, data); + break; + } + + if (pd->pos == 0) { + i2c_op(pd, OP_TX_TO_RX, 0); + break; + } + + real_pos = pd->pos - 2; + + if (pd->pos == pd->msg->len) { + if (real_pos < 0) { + i2c_op(pd, OP_RX_STOP, 0); + break; + } + data = i2c_op(pd, OP_RX_STOP_DATA, 0); + } else + data = i2c_op(pd, OP_RX, 0); + + pd->msg->buf[real_pos] = data; + } while (0); + + pd->pos++; + return pd->pos == (pd->msg->len + 2); +} + static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id) { struct platform_device *dev = dev_id; struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev); - struct i2c_msg *msg = pd->msg; - unsigned char data, sr; - int wakeup = 0; + unsigned char sr; + int wakeup; sr = ioread8(ICSR(pd)); - pd->sr |= sr; + pd->sr |= sr; /* remember state */ dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr, - (msg->flags & I2C_M_RD) ? "read" : "write", - pd->pos, msg->len); + (pd->msg->flags & I2C_M_RD) ? "read" : "write", + pd->pos, pd->msg->len); if (sr & (ICSR_AL | ICSR_TACK)) { - iowrite8(0, ICIC(pd)); /* disable interrupts */ - wakeup = 1; - goto do_wakeup; - } + /* don't interrupt transaction - continue to issue stop */ + iowrite8(sr & ~(ICSR_AL | ICSR_TACK), ICSR(pd)); + wakeup = 0; + } else if (pd->msg->flags & I2C_M_RD) + wakeup = sh_mobile_i2c_isr_rx(pd); + else + wakeup = sh_mobile_i2c_isr_tx(pd); - if (pd->pos == msg->len) { - i2c_op(pd, OP_RX_ONLY, 0); - wakeup = 1; - goto do_wakeup; - } + if (sr & ICSR_WAIT) /* TODO: add delay here to support slow acks */ + iowrite8(sr & ~ICSR_WAIT, ICSR(pd)); - if (pd->pos == -1) { - data = (msg->addr & 0x7f) << 1; - data |= (msg->flags & I2C_M_RD) ? 1 : 0; - } else - data = msg->buf[pd->pos]; - - if ((pd->pos == -1) || !(msg->flags & I2C_M_RD)) { - if (msg->flags & I2C_M_RD) - i2c_op(pd, OP_TX_TO_RX, data); - else if (pd->pos == (msg->len - 1)) { - i2c_op(pd, OP_TX_STOP, data); - wakeup = 1; - } else - i2c_op(pd, OP_TX_ONLY, data); - } else { - if (pd->pos == (msg->len - 1)) - data = i2c_op(pd, OP_RX_STOP, 0); - else - data = i2c_op(pd, OP_RX_ONLY, 0); - - msg->buf[pd->pos] = data; - } - pd->pos++; - - do_wakeup: if (wakeup) { pd->sr |= SW_DONE; wake_up(&pd->wait); @@ -219,6 +361,11 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id) static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg) { + if (usr_msg->len == 0 && (usr_msg->flags & I2C_M_RD)) { + dev_err(pd->dev, "Unsupported zero length i2c read\n"); + return -EIO; + } + /* Initialize channel registers */ iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd)); @@ -233,9 +380,8 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg) pd->pos = -1; pd->sr = 0; - /* Enable all interrupts except wait */ - iowrite8(ioread8(ICIC(pd)) | ICIC_ALE | ICIC_TACKE | ICIC_DTEE, - ICIC(pd)); + /* Enable all interrupts to begin with */ + iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE | ICIC_DTEE, ICIC(pd)); return 0; } @@ -268,25 +414,18 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter, if (!k) dev_err(pd->dev, "Transfer request timed out\n"); - retry_count = 10; + retry_count = 1000; again: val = ioread8(ICSR(pd)); dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr); - if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) { - err = -EIO; - break; - } - /* the interrupt handler may wake us up before the * transfer is finished, so poll the hardware * until we're done. */ - - if (!(!(val & ICSR_BUSY) && (val & ICSR_SCLM) && - (val & ICSR_SDAM))) { - msleep(1); + if (val & ICSR_BUSY) { + udelay(10); if (retry_count--) goto again; @@ -294,6 +433,12 @@ again: dev_err(pd->dev, "Polling timed out\n"); break; } + + /* handle missing acknowledge and arbitration lost */ + if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) { + err = -EIO; + break; + } } deactivate_ch(pd); |