3 files changed, 39 insertions, 29 deletions

diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c
index 3aad62a0e661..8587189c7f15 100644
--- a/drivers/hwmon/ntc_thermistor.c
+++ b/drivers/hwmon/ntc_thermistor.c
@@ -326,18 +326,27 @@ struct ntc_data {
 static int ntc_adc_iio_read(struct ntc_thermistor_platform_data *pdata)
 {
 	struct iio_channel *channel = pdata->chan;
-	int raw, uv, ret;
+	int uv, ret;
 
-	ret = iio_read_channel_raw(channel, &raw);
+	ret = iio_read_channel_processed_scale(channel, &uv, 1000);
 	if (ret < 0) {
-		pr_err("read channel() error: %d\n", ret);
-		return ret;
-	}
+		int raw;
 
-	ret = iio_convert_raw_to_processed(channel, raw, &uv, 1000);
-	if (ret < 0) {
-		/* Assume 12 bit ADC with vref at pullup_uv */
-		uv = (pdata->pullup_uv * (s64)raw) >> 12;
+		/*
+		 * This fallback uses a raw read and then
+		 * assumes the ADC is 12 bits, scaling with
+		 * a factor 1000 to get to microvolts.
+		 */
+		ret = iio_read_channel_raw(channel, &raw);
+		if (ret < 0) {
+			pr_err("read channel() error: %d\n", ret);
+			return ret;
+		}
+		ret = iio_convert_raw_to_processed(channel, raw, &uv, 1000);
+		if (ret < 0) {
+			/* Assume 12 bit ADC with vref at pullup_uv */
+			uv = (pdata->pullup_uv * (s64)raw) >> 12;
+		}
 	}
 
 	return uv;
diff --git a/drivers/hwmon/raspberrypi-hwmon.c b/drivers/hwmon/raspberrypi-hwmon.c
index d3a64a35f7a9..805d396aa81b 100644
--- a/drivers/hwmon/raspberrypi-hwmon.c
+++ b/drivers/hwmon/raspberrypi-hwmon.c
@@ -7,6 +7,7 @@
  * Copyright (C) 2018 Stefan Wahren <stefan.wahren@i2se.com>
  */
 #include <linux/device.h>
+#include <linux/devm-helpers.h>
 #include <linux/err.h>
 #include <linux/hwmon.h>
 #include <linux/module.h>
@@ -106,6 +107,7 @@ static int rpi_hwmon_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct rpi_hwmon_data *data;
+	int ret;
 
 	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
@@ -119,7 +121,10 @@ static int rpi_hwmon_probe(struct platform_device *pdev)
 							       &rpi_chip_info,
 							       NULL);
 
-	INIT_DELAYED_WORK(&data->get_values_poll_work, get_values_poll);
+	ret = devm_delayed_work_autocancel(dev, &data->get_values_poll_work,
+					   get_values_poll);
+	if (ret)
+		return ret;
 	platform_set_drvdata(pdev, data);
 
 	if (!PTR_ERR_OR_ZERO(data->hwmon_dev))
@@ -128,18 +133,8 @@ static int rpi_hwmon_probe(struct platform_device *pdev)
 	return PTR_ERR_OR_ZERO(data->hwmon_dev);
 }
 
-static int rpi_hwmon_remove(struct platform_device *pdev)
-{
-	struct rpi_hwmon_data *data = platform_get_drvdata(pdev);
-
-	cancel_delayed_work_sync(&data->get_values_poll_work);
-
-	return 0;
-}
-
 static struct platform_driver rpi_hwmon_driver = {
 	.probe = rpi_hwmon_probe,
-	.remove = rpi_hwmon_remove,
 	.driver = {
 		.name = "raspberrypi-hwmon",
 	},
diff --git a/drivers/hwmon/scmi-hwmon.c b/drivers/hwmon/scmi-hwmon.c
index 17d064e58938..b1329a58ce40 100644
--- a/drivers/hwmon/scmi-hwmon.c
+++ b/drivers/hwmon/scmi-hwmon.c
@@ -2,7 +2,7 @@
 /*
  * System Control and Management Interface(SCMI) based hwmon sensor driver
  *
- * Copyright (C) 2018 ARM Ltd.
+ * Copyright (C) 2018-2021 ARM Ltd.
  * Sudeep Holla <sudeep.holla@arm.com>
  */
 
@@ -13,8 +13,10 @@
 #include <linux/sysfs.h>
 #include <linux/thermal.h>
 
+static const struct scmi_sensor_proto_ops *sensor_ops;
+
 struct scmi_sensors {
-	const struct scmi_handle *handle;
+	const struct scmi_protocol_handle *ph;
 	const struct scmi_sensor_info **info[hwmon_max];
 };
 
@@ -69,10 +71,9 @@ static int scmi_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
 	u64 value;
 	const struct scmi_sensor_info *sensor;
 	struct scmi_sensors *scmi_sensors = dev_get_drvdata(dev);
-	const struct scmi_handle *h = scmi_sensors->handle;
 
 	sensor = *(scmi_sensors->info[type] + channel);
-	ret = h->sensor_ops->reading_get(h, sensor->id, &value);
+	ret = sensor_ops->reading_get(scmi_sensors->ph, sensor->id, &value);
 	if (ret)
 		return ret;
 
@@ -169,11 +170,16 @@ static int scmi_hwmon_probe(struct scmi_device *sdev)
 	struct hwmon_channel_info *scmi_hwmon_chan;
 	const struct hwmon_channel_info **ptr_scmi_ci;
 	const struct scmi_handle *handle = sdev->handle;
+	struct scmi_protocol_handle *ph;
 
-	if (!handle || !handle->sensor_ops)
+	if (!handle)
 		return -ENODEV;
 
-	nr_sensors = handle->sensor_ops->count_get(handle);
+	sensor_ops = handle->devm_protocol_get(sdev, SCMI_PROTOCOL_SENSOR, &ph);
+	if (IS_ERR(sensor_ops))
+		return PTR_ERR(sensor_ops);
+
+	nr_sensors = sensor_ops->count_get(ph);
 	if (!nr_sensors)
 		return -EIO;
 
@@ -181,10 +187,10 @@ static int scmi_hwmon_probe(struct scmi_device *sdev)
 	if (!scmi_sensors)
 		return -ENOMEM;
 
-	scmi_sensors->handle = handle;
+	scmi_sensors->ph = ph;
 
 	for (i = 0; i < nr_sensors; i++) {
-		sensor = handle->sensor_ops->info_get(handle, i);
+		sensor = sensor_ops->info_get(ph, i);
 		if (!sensor)
 			return -EINVAL;
 
@@ -236,7 +242,7 @@ static int scmi_hwmon_probe(struct scmi_device *sdev)
 	}
 
 	for (i = nr_sensors - 1; i >= 0 ; i--) {
-		sensor = handle->sensor_ops->info_get(handle, i);
+		sensor = sensor_ops->info_get(ph, i);
 		if (!sensor)
 			continue;