diff options
Diffstat (limited to 'drivers/hwmon/ina2xx.c')
| -rw-r--r-- | drivers/hwmon/ina2xx.c | 164 |
1 files changed, 158 insertions, 6 deletions
diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c index 49537ea80748..a16d6a283286 100644 --- a/drivers/hwmon/ina2xx.c +++ b/drivers/hwmon/ina2xx.c @@ -68,6 +68,21 @@ #define INA2XX_RSHUNT_DEFAULT 10000 +/* bit mask for reading the averaging setting in the configuration register */ +#define INA226_AVG_RD_MASK 0x0E00 + +#define INA226_READ_AVG(reg) (((reg) & INA226_AVG_RD_MASK) >> 9) +#define INA226_SHIFT_AVG(val) ((val) << 9) + +/* common attrs, ina226 attrs and NULL */ +#define INA2XX_MAX_ATTRIBUTE_GROUPS 3 + +/* + * Both bus voltage and shunt voltage conversion times for ina226 are set + * to 0b0100 on POR, which translates to 2200 microseconds in total. + */ +#define INA226_TOTAL_CONV_TIME_DEFAULT 2200 + enum ina2xx_ids { ina219, ina226 }; struct ina2xx_config { @@ -85,12 +100,15 @@ struct ina2xx_data { const struct ina2xx_config *config; long rshunt; + u16 curr_config; struct mutex update_lock; bool valid; unsigned long last_updated; + int update_interval; /* in jiffies */ int kind; + const struct attribute_group *groups[INA2XX_MAX_ATTRIBUTE_GROUPS]; u16 regs[INA2XX_MAX_REGISTERS]; }; @@ -115,6 +133,57 @@ static const struct ina2xx_config ina2xx_config[] = { }, }; +/* + * Available averaging rates for ina226. The indices correspond with + * the bit values expected by the chip (according to the ina226 datasheet, + * table 3 AVG bit settings, found at + * http://www.ti.com/lit/ds/symlink/ina226.pdf. + */ +static const int ina226_avg_tab[] = { 1, 4, 16, 64, 128, 256, 512, 1024 }; + +static int ina226_avg_bits(int avg) +{ + int i; + + /* Get the closest average from the tab. */ + for (i = 0; i < ARRAY_SIZE(ina226_avg_tab) - 1; i++) { + if (avg <= (ina226_avg_tab[i] + ina226_avg_tab[i + 1]) / 2) + break; + } + + return i; /* Return 0b0111 for values greater than 1024. */ +} + +static int ina226_reg_to_interval(u16 config) +{ + int avg = ina226_avg_tab[INA226_READ_AVG(config)]; + + /* + * Multiply the total conversion time by the number of averages. + * Return the result in milliseconds. + */ + return DIV_ROUND_CLOSEST(avg * INA226_TOTAL_CONV_TIME_DEFAULT, 1000); +} + +static u16 ina226_interval_to_reg(int interval, u16 config) +{ + int avg, avg_bits; + + avg = DIV_ROUND_CLOSEST(interval * 1000, + INA226_TOTAL_CONV_TIME_DEFAULT); + avg_bits = ina226_avg_bits(avg); + + return (config & ~INA226_AVG_RD_MASK) | INA226_SHIFT_AVG(avg_bits); +} + +static void ina226_set_update_interval(struct ina2xx_data *data) +{ + int ms; + + ms = ina226_reg_to_interval(data->curr_config); + data->update_interval = msecs_to_jiffies(ms); +} + static int ina2xx_calibrate(struct ina2xx_data *data) { return i2c_smbus_write_word_swapped(data->client, INA2XX_CALIBRATION, @@ -131,7 +200,7 @@ static int ina2xx_init(struct ina2xx_data *data) /* device configuration */ ret = i2c_smbus_write_word_swapped(client, INA2XX_CONFIG, - data->config->config_default); + data->curr_config); if (ret < 0) return ret; @@ -199,12 +268,13 @@ static struct ina2xx_data *ina2xx_update_device(struct device *dev) { struct ina2xx_data *data = dev_get_drvdata(dev); struct ina2xx_data *ret = data; + unsigned long after; int rv; mutex_lock(&data->update_lock); - if (time_after(jiffies, data->last_updated + - HZ / INA2XX_CONVERSION_RATE) || !data->valid) { + after = data->last_updated + data->update_interval; + if (time_after(jiffies, after) || !data->valid) { rv = ina2xx_do_update(dev); if (rv < 0) ret = ERR_PTR(rv); @@ -292,6 +362,58 @@ static ssize_t ina2xx_set_shunt(struct device *dev, return count; } +static ssize_t ina226_set_interval(struct device *dev, + struct device_attribute *da, + const char *buf, size_t count) +{ + struct ina2xx_data *data = dev_get_drvdata(dev); + unsigned long val; + int status; + + if (IS_ERR(data)) + return PTR_ERR(data); + + status = kstrtoul(buf, 10, &val); + if (status < 0) + return status; + + if (val > INT_MAX || val == 0) + return -EINVAL; + + mutex_lock(&data->update_lock); + data->curr_config = ina226_interval_to_reg(val, + data->regs[INA2XX_CONFIG]); + status = i2c_smbus_write_word_swapped(data->client, + INA2XX_CONFIG, + data->curr_config); + + ina226_set_update_interval(data); + /* Make sure the next access re-reads all registers. */ + data->valid = 0; + mutex_unlock(&data->update_lock); + if (status < 0) + return status; + + return count; +} + +static ssize_t ina226_show_interval(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct ina2xx_data *data = ina2xx_update_device(dev); + + if (IS_ERR(data)) + return PTR_ERR(data); + + /* + * We don't use data->update_interval here as we want to display + * the actual interval used by the chip and jiffies_to_msecs() + * doesn't seem to be accurate enough. + */ + return snprintf(buf, PAGE_SIZE, "%d\n", + ina226_reg_to_interval(data->regs[INA2XX_CONFIG])); +} + /* shunt voltage */ static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, ina2xx_show_value, NULL, INA2XX_SHUNT_VOLTAGE); @@ -313,6 +435,10 @@ static SENSOR_DEVICE_ATTR(shunt_resistor, S_IRUGO | S_IWUSR, ina2xx_show_value, ina2xx_set_shunt, INA2XX_CALIBRATION); +/* update interval (ina226 only) */ +static SENSOR_DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, + ina226_show_interval, ina226_set_interval, 0); + /* pointers to created device attributes */ static struct attribute *ina2xx_attrs[] = { &sensor_dev_attr_in0_input.dev_attr.attr, @@ -322,7 +448,19 @@ static struct attribute *ina2xx_attrs[] = { &sensor_dev_attr_shunt_resistor.dev_attr.attr, NULL, }; -ATTRIBUTE_GROUPS(ina2xx); + +static const struct attribute_group ina2xx_group = { + .attrs = ina2xx_attrs, +}; + +static struct attribute *ina226_attrs[] = { + &sensor_dev_attr_update_interval.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ina226_group = { + .attrs = ina226_attrs, +}; static int ina2xx_probe(struct i2c_client *client, const struct i2c_device_id *id) @@ -333,7 +471,7 @@ static int ina2xx_probe(struct i2c_client *client, struct ina2xx_data *data; struct device *hwmon_dev; u32 val; - int ret; + int ret, group = 0; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) return -ENODEV; @@ -355,8 +493,18 @@ static int ina2xx_probe(struct i2c_client *client, /* set the device type */ data->kind = id->driver_data; data->config = &ina2xx_config[data->kind]; + data->curr_config = data->config->config_default; data->client = client; + /* + * Ina226 has a variable update_interval. For ina219 we + * use a constant value. + */ + if (data->kind == ina226) + ina226_set_update_interval(data); + else + data->update_interval = HZ / INA2XX_CONVERSION_RATE; + if (data->rshunt <= 0 || data->rshunt > data->config->calibration_factor) return -ENODEV; @@ -369,8 +517,12 @@ static int ina2xx_probe(struct i2c_client *client, mutex_init(&data->update_lock); + data->groups[group++] = &ina2xx_group; + if (data->kind == ina226) + data->groups[group++] = &ina226_group; + hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, - data, ina2xx_groups); + data, data->groups); if (IS_ERR(hwmon_dev)) return PTR_ERR(hwmon_dev); |