diff options
Diffstat (limited to 'drivers/hid')
-rw-r--r-- | drivers/hid/Kconfig | 17 | ||||
-rw-r--r-- | drivers/hid/Makefile | 1 | ||||
-rw-r--r-- | drivers/hid/hid-cando.c | 2 | ||||
-rw-r--r-- | drivers/hid/hid-core.c | 7 | ||||
-rw-r--r-- | drivers/hid/hid-ids.h | 7 | ||||
-rw-r--r-- | drivers/hid/hid-input.c | 17 | ||||
-rw-r--r-- | drivers/hid/hid-mosart.c | 1 | ||||
-rw-r--r-- | drivers/hid/hid-multitouch.c | 516 | ||||
-rw-r--r-- | drivers/hid/usbhid/hid-quirks.c | 1 |
9 files changed, 563 insertions, 6 deletions
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index ffbc278647bf..24cca2f69dfc 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -295,6 +295,23 @@ config HID_MONTEREY ---help--- Support for Monterey Genius KB29E. +config HID_MULTITOUCH + tristate "HID Multitouch panels" + depends on USB_HID + ---help--- + Generic support for HID multitouch panels. + + Say Y here if you have one of the following devices: + - Cypress TrueTouch panels + - Hanvon dual touch panels + - Pixcir dual touch panels + - 'Sensing Win7-TwoFinger' panel by GeneralTouch + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called hid-multitouch. + config HID_NTRIG tristate "N-Trig touch screen" depends on USB_HID diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index 6eae9a90b8dd..6efc2a0370ad 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -47,6 +47,7 @@ obj-$(CONFIG_HID_MAGICMOUSE) += hid-magicmouse.o obj-$(CONFIG_HID_MICROSOFT) += hid-microsoft.o obj-$(CONFIG_HID_MONTEREY) += hid-monterey.o obj-$(CONFIG_HID_MOSART) += hid-mosart.o +obj-$(CONFIG_HID_MULTITOUCH) += hid-multitouch.o obj-$(CONFIG_HID_NTRIG) += hid-ntrig.o obj-$(CONFIG_HID_ORTEK) += hid-ortek.o obj-$(CONFIG_HID_PRODIKEYS) += hid-prodikeys.o diff --git a/drivers/hid/hid-cando.c b/drivers/hid/hid-cando.c index 375b50929a50..1ea066c55201 100644 --- a/drivers/hid/hid-cando.c +++ b/drivers/hid/hid-cando.c @@ -236,6 +236,8 @@ static const struct hid_device_id cando_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, + USB_DEVICE_ID_CANDO_MULTI_TOUCH_10_1) }, + { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6) }, { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH_15_6) }, diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 261168607c91..d678cf3d33d5 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1312,7 +1312,9 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) }, { HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE_2) }, + { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_PIXCIR_MULTI_TOUCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH) }, + { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH_10_1) }, { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6) }, { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH_15_6) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) }, @@ -1324,6 +1326,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_3) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE) }, + { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_TRUETOUCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006) }, { HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1) }, @@ -1335,11 +1338,13 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) }, { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) }, { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) }, + { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS) }, { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) }, { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0012) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_3) }, + { HID_USB_DEVICE(USB_VENDOR_ID_HANVON, USB_DEVICE_ID_HANVON_MULTITOUCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) }, { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, @@ -1422,6 +1427,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) }, { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2, USB_DEVICE_ID_TOPSEED2_RF_COMBO) }, { HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) }, + { HID_USB_DEVICE(USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_TOUCHSCREEN_MOSART) }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209) }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U) }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U) }, @@ -1640,7 +1646,6 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) }, { HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) }, { HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC4UM) }, - { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0001) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0002) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0003) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0004) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index f65cace77729..92a0d61a7379 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -140,7 +140,9 @@ #define USB_DEVICE_ID_BTC_EMPREX_REMOTE_2 0x5577 #define USB_VENDOR_ID_CANDO 0x2087 +#define USB_DEVICE_ID_CANDO_PIXCIR_MULTI_TOUCH 0x0703 #define USB_DEVICE_ID_CANDO_MULTI_TOUCH 0x0a01 +#define USB_DEVICE_ID_CANDO_MULTI_TOUCH_10_1 0x0a02 #define USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6 0x0b03 #define USB_DEVICE_ID_CANDO_MULTI_TOUCH_15_6 0x0f01 @@ -186,6 +188,7 @@ #define USB_DEVICE_ID_CYPRESS_BARCODE_1 0xde61 #define USB_DEVICE_ID_CYPRESS_BARCODE_2 0xde64 #define USB_DEVICE_ID_CYPRESS_BARCODE_3 0xbca1 +#define USB_DEVICE_ID_CYPRESS_TRUETOUCH 0xc001 #define USB_VENDOR_ID_DEALEXTREAME 0x10c5 #define USB_DEVICE_ID_DEALEXTREAME_RADIO_SI4701 0x819a @@ -236,6 +239,7 @@ #define USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR 0x0002 #define USB_VENDOR_ID_GENERAL_TOUCH 0x0dfc +#define USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS 0x0001 #define USB_VENDOR_ID_GLAB 0x06c2 #define USB_DEVICE_ID_4_PHIDGETSERVO_30 0x0038 @@ -318,6 +322,9 @@ #define USB_DEVICE_ID_HANWANG_TABLET_FIRST 0x5000 #define USB_DEVICE_ID_HANWANG_TABLET_LAST 0x8fff +#define USB_VENDOR_ID_HANVON 0x20b3 +#define USB_DEVICE_ID_HANVON_MULTITOUCH 0x0a18 + #define USB_VENDOR_ID_HAPP 0x078b #define USB_DEVICE_ID_UGCI_DRIVING 0x0010 #define USB_DEVICE_ID_UGCI_FLYING 0x0020 diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index e60fdb88101f..7f552bfad32c 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -290,6 +290,14 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel goto ignore; } + if (field->report_type == HID_FEATURE_REPORT) { + if (device->driver->feature_mapping) { + device->driver->feature_mapping(device, hidinput, field, + usage); + } + goto ignore; + } + if (device->driver->input_mapping) { int ret = device->driver->input_mapping(device, hidinput, field, usage, &bit, &max); @@ -839,7 +847,6 @@ int hidinput_connect(struct hid_device *hid, unsigned int force) struct hid_input *hidinput = NULL; struct input_dev *input_dev; int i, j, k; - int max_report_type = HID_OUTPUT_REPORT; INIT_LIST_HEAD(&hid->inputs); @@ -856,10 +863,11 @@ int hidinput_connect(struct hid_device *hid, unsigned int force) return -1; } - if (hid->quirks & HID_QUIRK_SKIP_OUTPUT_REPORTS) - max_report_type = HID_INPUT_REPORT; + for (k = HID_INPUT_REPORT; k <= HID_FEATURE_REPORT; k++) { + if (k == HID_OUTPUT_REPORT && + hid->quirks & HID_QUIRK_SKIP_OUTPUT_REPORTS) + continue; - for (k = HID_INPUT_REPORT; k <= max_report_type; k++) list_for_each_entry(report, &hid->report_enum[k].report_list, list) { if (!report->maxfield) @@ -912,6 +920,7 @@ int hidinput_connect(struct hid_device *hid, unsigned int force) hidinput = NULL; } } + } if (hidinput && input_register_device(hidinput->input)) goto out_cleanup; diff --git a/drivers/hid/hid-mosart.c b/drivers/hid/hid-mosart.c index 9fb050ce6f04..aed7ffe36283 100644 --- a/drivers/hid/hid-mosart.c +++ b/drivers/hid/hid-mosart.c @@ -257,6 +257,7 @@ static void mosart_remove(struct hid_device *hdev) static const struct hid_device_id mosart_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_T91MT) }, { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUSTEK_MULTITOUCH_YFO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_TOUCHSCREEN_MOSART) }, { } }; MODULE_DEVICE_TABLE(hid, mosart_devices); diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c new file mode 100644 index 000000000000..07d3183fdde5 --- /dev/null +++ b/drivers/hid/hid-multitouch.c @@ -0,0 +1,516 @@ +/* + * HID driver for multitouch panels + * + * Copyright (c) 2010-2011 Stephane Chatty <chatty@enac.fr> + * Copyright (c) 2010-2011 Benjamin Tissoires <benjamin.tissoires@gmail.com> + * Copyright (c) 2010-2011 Ecole Nationale de l'Aviation Civile, France + * + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <linux/device.h> +#include <linux/hid.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/usb.h> +#include <linux/input/mt.h> +#include "usbhid/usbhid.h" + + +MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>"); +MODULE_DESCRIPTION("HID multitouch panels"); +MODULE_LICENSE("GPL"); + +#include "hid-ids.h" + +/* quirks to control the device */ +#define MT_QUIRK_NOT_SEEN_MEANS_UP (1 << 0) +#define MT_QUIRK_SLOT_IS_CONTACTID (1 << 1) +#define MT_QUIRK_CYPRESS (1 << 2) +#define MT_QUIRK_SLOT_IS_CONTACTNUMBER (1 << 3) +#define MT_QUIRK_VALID_IS_INRANGE (1 << 4) +#define MT_QUIRK_VALID_IS_CONFIDENCE (1 << 5) + +struct mt_slot { + __s32 x, y, p, w, h; + __s32 contactid; /* the device ContactID assigned to this slot */ + bool touch_state; /* is the touch valid? */ + bool seen_in_this_frame;/* has this slot been updated */ +}; + +struct mt_device { + struct mt_slot curdata; /* placeholder of incoming data */ + struct mt_class *mtclass; /* our mt device class */ + unsigned last_field_index; /* last field index of the report */ + unsigned last_slot_field; /* the last field of a slot */ + __s8 inputmode; /* InputMode HID feature, -1 if non-existent */ + __u8 num_received; /* how many contacts we received */ + __u8 num_expected; /* expected last contact index */ + bool curvalid; /* is the current contact valid? */ + struct mt_slot slots[0]; /* first slot */ +}; + +struct mt_class { + __s32 name; /* MT_CLS */ + __s32 quirks; + __s32 sn_move; /* Signal/noise ratio for move events */ + __s32 sn_pressure; /* Signal/noise ratio for pressure events */ + __u8 maxcontacts; +}; + +/* classes of device behavior */ +#define MT_CLS_DEFAULT 1 +#define MT_CLS_DUAL1 2 +#define MT_CLS_DUAL2 3 +#define MT_CLS_CYPRESS 4 + +/* + * these device-dependent functions determine what slot corresponds + * to a valid contact that was just read. + */ + +static int cypress_compute_slot(struct mt_device *td) +{ + if (td->curdata.contactid != 0 || td->num_received == 0) + return td->curdata.contactid; + else + return -1; +} + +static int find_slot_from_contactid(struct mt_device *td) +{ + int i; + for (i = 0; i < td->mtclass->maxcontacts; ++i) { + if (td->slots[i].contactid == td->curdata.contactid && + td->slots[i].touch_state) + return i; + } + for (i = 0; i < td->mtclass->maxcontacts; ++i) { + if (!td->slots[i].seen_in_this_frame && + !td->slots[i].touch_state) + return i; + } + /* should not occurs. If this happens that means + * that the device sent more touches that it says + * in the report descriptor. It is ignored then. */ + return -1; +} + +struct mt_class mt_classes[] = { + { .name = MT_CLS_DEFAULT, + .quirks = MT_QUIRK_VALID_IS_INRANGE, + .maxcontacts = 10 }, + { .name = MT_CLS_DUAL1, + .quirks = MT_QUIRK_VALID_IS_INRANGE | + MT_QUIRK_SLOT_IS_CONTACTID, + .maxcontacts = 2 }, + { .name = MT_CLS_DUAL2, + .quirks = MT_QUIRK_VALID_IS_INRANGE | + MT_QUIRK_SLOT_IS_CONTACTNUMBER, + .maxcontacts = 2 }, + { .name = MT_CLS_CYPRESS, + .quirks = MT_QUIRK_NOT_SEEN_MEANS_UP | + MT_QUIRK_CYPRESS, + .maxcontacts = 10 }, + + { } +}; + +static void mt_feature_mapping(struct hid_device *hdev, struct hid_input *hi, + struct hid_field *field, struct hid_usage *usage) +{ + if (usage->hid == HID_DG_INPUTMODE) { + struct mt_device *td = hid_get_drvdata(hdev); + td->inputmode = field->report->id; + } +} + +static void set_abs(struct input_dev *input, unsigned int code, + struct hid_field *field, int snratio) +{ + int fmin = field->logical_minimum; + int fmax = field->logical_maximum; + int fuzz = snratio ? (fmax - fmin) / snratio : 0; + input_set_abs_params(input, code, fmin, fmax, fuzz, 0); +} + +static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, + struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) +{ + struct mt_device *td = hid_get_drvdata(hdev); + struct mt_class *cls = td->mtclass; + switch (usage->hid & HID_USAGE_PAGE) { + + case HID_UP_GENDESK: + switch (usage->hid) { + case HID_GD_X: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_POSITION_X); + set_abs(hi->input, ABS_MT_POSITION_X, field, + cls->sn_move); + /* touchscreen emulation */ + set_abs(hi->input, ABS_X, field, cls->sn_move); + td->last_slot_field = usage->hid; + return 1; + case HID_GD_Y: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_POSITION_Y); + set_abs(hi->input, ABS_MT_POSITION_Y, field, + cls->sn_move); + /* touchscreen emulation */ + set_abs(hi->input, ABS_Y, field, cls->sn_move); + td->last_slot_field = usage->hid; + return 1; + } + return 0; + + case HID_UP_DIGITIZER: + switch (usage->hid) { + case HID_DG_INRANGE: + td->last_slot_field = usage->hid; + return 1; + case HID_DG_CONFIDENCE: + td->last_slot_field = usage->hid; + return 1; + case HID_DG_TIPSWITCH: + hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH); + input_set_capability(hi->input, EV_KEY, BTN_TOUCH); + td->last_slot_field = usage->hid; + return 1; + case HID_DG_CONTACTID: + input_mt_init_slots(hi->input, + td->mtclass->maxcontacts); + td->last_slot_field = usage->hid; + return 1; + case HID_DG_WIDTH: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_TOUCH_MAJOR); + td->last_slot_field = usage->hid; + return 1; + case HID_DG_HEIGHT: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_TOUCH_MINOR); + field->logical_maximum = 1; + field->logical_minimum = 0; + set_abs(hi->input, ABS_MT_ORIENTATION, field, 0); + td->last_slot_field = usage->hid; + return 1; + case HID_DG_TIPPRESSURE: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_PRESSURE); + set_abs(hi->input, ABS_MT_PRESSURE, field, + cls->sn_pressure); + /* touchscreen emulation */ + set_abs(hi->input, ABS_PRESSURE, field, + cls->sn_pressure); + td->last_slot_field = usage->hid; + return 1; + case HID_DG_CONTACTCOUNT: + td->last_field_index = field->report->maxfield - 1; + return 1; + case HID_DG_CONTACTMAX: + /* we don't set td->last_slot_field as contactcount and + * contact max are global to the report */ + return -1; + } + /* let hid-input decide for the others */ + return 0; + + case 0xff000000: + /* we do not want to map these: no input-oriented meaning */ + return -1; + } + + return 0; +} + +static int mt_input_mapped(struct hid_device *hdev, struct hid_input *hi, + struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) +{ + if (usage->type == EV_KEY || usage->type == EV_ABS) + set_bit(usage->type, hi->input->evbit); + + return -1; +} + +static int mt_compute_slot(struct mt_device *td) +{ + __s32 quirks = td->mtclass->quirks; + + if (quirks & MT_QUIRK_SLOT_IS_CONTACTID) + return td->curdata.contactid; + + if (quirks & MT_QUIRK_CYPRESS) + return cypress_compute_slot(td); + + if (quirks & MT_QUIRK_SLOT_IS_CONTACTNUMBER) + return td->num_received; + + return find_slot_from_contactid(td); +} + +/* + * this function is called when a whole contact has been processed, + * so that it can assign it to a slot and store the data there + */ +static void mt_complete_slot(struct mt_device *td) +{ + td->curdata.seen_in_this_frame = true; + if (td->curvalid) { + int slotnum = mt_compute_slot(td); + + if (slotnum >= 0 && slotnum < td->mtclass->maxcontacts) + td->slots[slotnum] = td->curdata; + } + td->num_received++; +} + + +/* + * this function is called when a whole packet has been received and processed, + * so that it can decide what to send to the input layer. + */ +static void mt_emit_event(struct mt_device *td, struct input_dev *input) +{ + int i; + + for (i = 0; i < td->mtclass->maxcontacts; ++i) { + struct mt_slot *s = &(td->slots[i]); + if ((td->mtclass->quirks & MT_QUIRK_NOT_SEEN_MEANS_UP) && + !s->seen_in_this_frame) { + s->touch_state = false; + } + + input_mt_slot(input, i); + input_mt_report_slot_state(input, MT_TOOL_FINGER, + s->touch_state); + if (s->touch_state) { + input_event(input, EV_ABS, ABS_MT_POSITION_X, s->x); + input_event(input, EV_ABS, ABS_MT_POSITION_Y, s->y); + input_event(input, EV_ABS, ABS_MT_PRESSURE, s->p); + input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, s->w); + input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, s->h); + } + s->seen_in_this_frame = false; + + } + + input_mt_report_pointer_emulation(input, true); + input_sync(input); + td->num_received = 0; +} + + + +static int mt_event(struct hid_device *hid, struct hid_field *field, + struct hid_usage *usage, __s32 value) +{ + struct mt_device *td = hid_get_drvdata(hid); + __s32 quirks = td->mtclass->quirks; + + if (hid->claimed & HID_CLAIMED_INPUT) { + switch (usage->hid) { + case HID_DG_INRANGE: + if (quirks & MT_QUIRK_VALID_IS_INRANGE) + td->curvalid = value; + break; + case HID_DG_TIPSWITCH: + if (quirks & MT_QUIRK_NOT_SEEN_MEANS_UP) + td->curvalid = value; + td->curdata.touch_state = value; + break; + case HID_DG_CONFIDENCE: + if (quirks & MT_QUIRK_VALID_IS_CONFIDENCE) + td->curvalid = value; + break; + case HID_DG_CONTACTID: + td->curdata.contactid = value; + break; + case HID_DG_TIPPRESSURE: + td->curdata.p = value; + break; + case HID_GD_X: + td->curdata.x = value; + break; + case HID_GD_Y: + td->curdata.y = value; + break; + case HID_DG_WIDTH: + td->curdata.w = value; + break; + case HID_DG_HEIGHT: + td->curdata.h = value; + break; + case HID_DG_CONTACTCOUNT: + /* + * Includes multi-packet support where subsequent + * packets are sent with zero contactcount. + */ + if (value) + td->num_expected = value; + break; + + default: + /* fallback to the generic hidinput handling */ + return 0; + } + + if (usage->hid == td->last_slot_field) + mt_complete_slot(td); + + if (field->index == td->last_field_index + && td->num_received >= td->num_expected) + mt_emit_event(td, field->hidinput->input); + + } + + /* we have handled the hidinput part, now remains hiddev */ + if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event) + hid->hiddev_hid_event(hid, field, usage, value); + + return 1; +} + +static void mt_set_input_mode(struct hid_device *hdev) +{ + struct mt_device *td = hid_get_drvdata(hdev); + struct hid_report *r; + struct hid_report_enum *re; + + if (td->inputmode < 0) + return; + + re = &(hdev->report_enum[HID_FEATURE_REPORT]); + r = re->report_id_hash[td->inputmode]; + if (r) { + r->field[0]->value[0] = 0x02; + usbhid_submit_report(hdev, r, USB_DIR_OUT); + } +} + +static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id) +{ + int ret, i; + struct mt_device *td; + struct mt_class *mtclass = mt_classes; /* MT_CLS_DEFAULT */ + + for (i = 0; mt_classes[i].name ; i++) { + if (id->driver_data == mt_classes[i].name) { + mtclass = &(mt_classes[i]); + break; + } + } + + /* This allows the driver to correctly support devices + * that emit events over several HID messages. + */ + hdev->quirks |= HID_QUIRK_NO_INPUT_SYNC; + + td = kzalloc(sizeof(struct mt_device) + + mtclass->maxcontacts * sizeof(struct mt_slot), + GFP_KERNEL); + if (!td) { + dev_err(&hdev->dev, "cannot allocate multitouch data\n"); + return -ENOMEM; + } + td->mtclass = mtclass; + td->inputmode = -1; + hid_set_drvdata(hdev, td); + + ret = hid_parse(hdev); + if (ret != 0) + goto fail; + + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); + if (ret) + goto fail; + + mt_set_input_mode(hdev); + + return 0; + +fail: + kfree(td); + return ret; +} + +#ifdef CONFIG_PM +static int mt_reset_resume(struct hid_device *hdev) +{ + mt_set_input_mode(hdev); + return 0; +} +#endif + +static void mt_remove(struct hid_device *hdev) +{ + struct mt_device *td = hid_get_drvdata(hdev); + hid_hw_stop(hdev); + kfree(td); + hid_set_drvdata(hdev, NULL); +} + +static const struct hid_device_id mt_devices[] = { + + /* Cypress panel */ + { .driver_data = MT_CLS_CYPRESS, + HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, + USB_DEVICE_ID_CYPRESS_TRUETOUCH) }, + + /* GeneralTouch panel */ + { .driver_data = MT_CLS_DUAL2, + HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, + USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS) }, + + /* PixCir-based panels */ + { .driver_data = MT_CLS_DUAL1, + HID_USB_DEVICE(USB_VENDOR_ID_HANVON, + USB_DEVICE_ID_HANVON_MULTITOUCH) }, + { .driver_data = MT_CLS_DUAL1, + HID_USB_DEVICE(USB_VENDOR_ID_CANDO, + USB_DEVICE_ID_CANDO_PIXCIR_MULTI_TOUCH) }, + + { } +}; +MODULE_DEVICE_TABLE(hid, mt_devices); + +static const struct hid_usage_id mt_grabbed_usages[] = { + { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID }, + { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1} +}; + +static struct hid_driver mt_driver = { + .name = "hid-multitouch", + .id_table = mt_devices, + .probe = mt_probe, + .remove = mt_remove, + .input_mapping = mt_input_mapping, + .input_mapped = mt_input_mapped, + .feature_mapping = mt_feature_mapping, + .usage_table = mt_grabbed_usages, + .event = mt_event, +#ifdef CONFIG_PM + .reset_resume = mt_reset_resume, +#endif +}; + +static int __init mt_init(void) +{ + return hid_register_driver(&mt_driver); +} + +static void __exit mt_exit(void) +{ + hid_unregister_driver(&mt_driver); +} + +module_init(mt_init); +module_exit(mt_exit); diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 76b9a149c7df..9a94b643ccde 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -35,7 +35,6 @@ static const struct hid_blacklist { { USB_VENDOR_ID_CHIC, USB_DEVICE_ID_CHIC_GAMEPAD, HID_QUIRK_BADPAD }, { USB_VENDOR_ID_DWAV, USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER, HID_QUIRK_MULTI_INPUT | HID_QUIRK_NOGET }, { USB_VENDOR_ID_MOJO, USB_DEVICE_ID_RETRO_ADAPTER, HID_QUIRK_MULTI_INPUT }, - { USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_TOUCHSCREEN_MOSART, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT }, |