summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915/intel_psr.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/i915/intel_psr.c')
-rw-r--r--drivers/gpu/drm/i915/intel_psr.c450
1 files changed, 224 insertions, 226 deletions
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index 1b31ab002dae..6e3b430fccdc 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -58,6 +58,9 @@
static bool is_edp_psr(struct intel_dp *intel_dp)
{
+ if (!intel_dp_is_edp(intel_dp))
+ return false;
+
return intel_dp->psr_dpcd[0] & DP_PSR_IS_SUPPORTED;
}
@@ -72,90 +75,54 @@ static bool vlv_is_psr_active_on_pipe(struct drm_device *dev, int pipe)
(val == VLV_EDP_PSR_ACTIVE_SF_UPDATE);
}
-static void intel_psr_write_vsc(struct intel_dp *intel_dp,
- const struct edp_vsc_psr *vsc_psr)
-{
- struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
- struct drm_device *dev = dig_port->base.base.dev;
- struct drm_i915_private *dev_priv = to_i915(dev);
- struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc);
- enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
- i915_reg_t ctl_reg = HSW_TVIDEO_DIP_CTL(cpu_transcoder);
- uint32_t *data = (uint32_t *) vsc_psr;
- unsigned int i;
-
- /* As per BSPec (Pipe Video Data Island Packet), we need to disable
- the video DIP being updated before program video DIP data buffer
- registers for DIP being updated. */
- I915_WRITE(ctl_reg, 0);
- POSTING_READ(ctl_reg);
-
- for (i = 0; i < sizeof(*vsc_psr); i += 4) {
- I915_WRITE(HSW_TVIDEO_DIP_VSC_DATA(cpu_transcoder,
- i >> 2), *data);
- data++;
- }
- for (; i < VIDEO_DIP_VSC_DATA_SIZE; i += 4)
- I915_WRITE(HSW_TVIDEO_DIP_VSC_DATA(cpu_transcoder,
- i >> 2), 0);
-
- I915_WRITE(ctl_reg, VIDEO_DIP_ENABLE_VSC_HSW);
- POSTING_READ(ctl_reg);
-}
-
-static void vlv_psr_setup_vsc(struct intel_dp *intel_dp)
+static void vlv_psr_setup_vsc(struct intel_dp *intel_dp,
+ const struct intel_crtc_state *crtc_state)
{
- struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
- struct drm_device *dev = intel_dig_port->base.base.dev;
- struct drm_i915_private *dev_priv = to_i915(dev);
- struct drm_crtc *crtc = intel_dig_port->base.base.crtc;
- enum pipe pipe = to_intel_crtc(crtc)->pipe;
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
uint32_t val;
/* VLV auto-generate VSC package as per EDP 1.3 spec, Table 3.10 */
- val = I915_READ(VLV_VSCSDP(pipe));
+ val = I915_READ(VLV_VSCSDP(crtc->pipe));
val &= ~VLV_EDP_PSR_SDP_FREQ_MASK;
val |= VLV_EDP_PSR_SDP_FREQ_EVFRAME;
- I915_WRITE(VLV_VSCSDP(pipe), val);
+ I915_WRITE(VLV_VSCSDP(crtc->pipe), val);
}
-static void skl_psr_setup_su_vsc(struct intel_dp *intel_dp)
+static void hsw_psr_setup_vsc(struct intel_dp *intel_dp,
+ const struct intel_crtc_state *crtc_state)
{
- struct edp_vsc_psr psr_vsc;
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
- struct drm_device *dev = intel_dig_port->base.base.dev;
- struct drm_i915_private *dev_priv = to_i915(dev);
+ struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
+ struct edp_vsc_psr psr_vsc;
- /* Prepare VSC Header for SU as per EDP 1.4 spec, Table 6.11 */
- memset(&psr_vsc, 0, sizeof(psr_vsc));
- psr_vsc.sdp_header.HB0 = 0;
- psr_vsc.sdp_header.HB1 = 0x7;
- if (dev_priv->psr.colorimetry_support &&
- dev_priv->psr.y_cord_support) {
- psr_vsc.sdp_header.HB2 = 0x5;
- psr_vsc.sdp_header.HB3 = 0x13;
- } else if (dev_priv->psr.y_cord_support) {
- psr_vsc.sdp_header.HB2 = 0x4;
- psr_vsc.sdp_header.HB3 = 0xe;
+ if (dev_priv->psr.psr2_support) {
+ /* Prepare VSC Header for SU as per EDP 1.4 spec, Table 6.11 */
+ memset(&psr_vsc, 0, sizeof(psr_vsc));
+ psr_vsc.sdp_header.HB0 = 0;
+ psr_vsc.sdp_header.HB1 = 0x7;
+ if (dev_priv->psr.colorimetry_support &&
+ dev_priv->psr.y_cord_support) {
+ psr_vsc.sdp_header.HB2 = 0x5;
+ psr_vsc.sdp_header.HB3 = 0x13;
+ } else if (dev_priv->psr.y_cord_support) {
+ psr_vsc.sdp_header.HB2 = 0x4;
+ psr_vsc.sdp_header.HB3 = 0xe;
+ } else {
+ psr_vsc.sdp_header.HB2 = 0x3;
+ psr_vsc.sdp_header.HB3 = 0xc;
+ }
} else {
- psr_vsc.sdp_header.HB2 = 0x3;
- psr_vsc.sdp_header.HB3 = 0xc;
+ /* Prepare VSC packet as per EDP 1.3 spec, Table 3.10 */
+ memset(&psr_vsc, 0, sizeof(psr_vsc));
+ psr_vsc.sdp_header.HB0 = 0;
+ psr_vsc.sdp_header.HB1 = 0x7;
+ psr_vsc.sdp_header.HB2 = 0x2;
+ psr_vsc.sdp_header.HB3 = 0x8;
}
- intel_psr_write_vsc(intel_dp, &psr_vsc);
-}
-
-static void hsw_psr_setup_vsc(struct intel_dp *intel_dp)
-{
- struct edp_vsc_psr psr_vsc;
-
- /* Prepare VSC packet as per EDP 1.3 spec, Table 3.10 */
- memset(&psr_vsc, 0, sizeof(psr_vsc));
- psr_vsc.sdp_header.HB0 = 0;
- psr_vsc.sdp_header.HB1 = 0x7;
- psr_vsc.sdp_header.HB2 = 0x2;
- psr_vsc.sdp_header.HB3 = 0x8;
- intel_psr_write_vsc(intel_dp, &psr_vsc);
+ intel_dig_port->write_infoframe(&intel_dig_port->base.base, crtc_state,
+ DP_SDP_VSC, &psr_vsc, sizeof(psr_vsc));
}
static void vlv_psr_enable_sink(struct intel_dp *intel_dp)
@@ -233,16 +200,15 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
I915_WRITE(aux_ctl_reg, aux_ctl);
}
-static void vlv_psr_enable_source(struct intel_dp *intel_dp)
+static void vlv_psr_enable_source(struct intel_dp *intel_dp,
+ const struct intel_crtc_state *crtc_state)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
- struct drm_device *dev = dig_port->base.base.dev;
- struct drm_i915_private *dev_priv = to_i915(dev);
- struct drm_crtc *crtc = dig_port->base.base.crtc;
- enum pipe pipe = to_intel_crtc(crtc)->pipe;
+ struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
- /* Transition from PSR_state 0 to PSR_state 1, i.e. PSR Inactive */
- I915_WRITE(VLV_PSRCTL(pipe),
+ /* Transition from PSR_state 0 (disabled) to PSR_state 1 (inactive) */
+ I915_WRITE(VLV_PSRCTL(crtc->pipe),
VLV_EDP_PSR_MODE_SW_TIMER |
VLV_EDP_PSR_SRC_TRANSMITTER_STATE |
VLV_EDP_PSR_ENABLE);
@@ -256,16 +222,17 @@ static void vlv_psr_activate(struct intel_dp *intel_dp)
struct drm_crtc *crtc = dig_port->base.base.crtc;
enum pipe pipe = to_intel_crtc(crtc)->pipe;
- /* Let's do the transition from PSR_state 1 to PSR_state 2
- * that is PSR transition to active - static frame transmission.
- * Then Hardware is responsible for the transition to PSR_state 3
- * that is PSR active - no Remote Frame Buffer (RFB) update.
+ /*
+ * Let's do the transition from PSR_state 1 (inactive) to
+ * PSR_state 2 (transition to active - static frame transmission).
+ * Then Hardware is responsible for the transition to
+ * PSR_state 3 (active - no Remote Frame Buffer (RFB) update).
*/
I915_WRITE(VLV_PSRCTL(pipe), I915_READ(VLV_PSRCTL(pipe)) |
VLV_EDP_PSR_ACTIVE_ENTRY);
}
-static void intel_enable_source_psr1(struct intel_dp *intel_dp)
+static void hsw_activate_psr1(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = dig_port->base.base.dev;
@@ -319,7 +286,7 @@ static void intel_enable_source_psr1(struct intel_dp *intel_dp)
I915_WRITE(EDP_PSR_CTL, val);
}
-static void intel_enable_source_psr2(struct intel_dp *intel_dp)
+static void hsw_activate_psr2(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = dig_port->base.base.dev;
@@ -333,6 +300,7 @@ static void intel_enable_source_psr2(struct intel_dp *intel_dp)
*/
uint32_t idle_frames = max(6, dev_priv->vbt.psr.idle_frames);
uint32_t val;
+ uint8_t sink_latency;
val = idle_frames << EDP_PSR_IDLE_FRAME_SHIFT;
@@ -340,8 +308,16 @@ static void intel_enable_source_psr2(struct intel_dp *intel_dp)
* mesh at all with our frontbuffer tracking. And the hw alone isn't
* good enough. */
val |= EDP_PSR2_ENABLE |
- EDP_SU_TRACK_ENABLE |
- EDP_FRAMES_BEFORE_SU_ENTRY;
+ EDP_SU_TRACK_ENABLE;
+
+ if (drm_dp_dpcd_readb(&intel_dp->aux,
+ DP_SYNCHRONIZATION_LATENCY_IN_SINK,
+ &sink_latency) == 1) {
+ sink_latency &= DP_MAX_RESYNC_FRAME_COUNT_MASK;
+ } else {
+ sink_latency = 0;
+ }
+ val |= EDP_PSR2_FRAME_BEFORE_SU(sink_latency + 1);
if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 5)
val |= EDP_PSR2_TP2_TIME_2500;
@@ -355,35 +331,43 @@ static void intel_enable_source_psr2(struct intel_dp *intel_dp)
I915_WRITE(EDP_PSR2_CTL, val);
}
-static void hsw_psr_enable_source(struct intel_dp *intel_dp)
+static void hsw_psr_activate(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
+ /* On HSW+ after we enable PSR on source it will activate it
+ * as soon as it match configure idle_frame count. So
+ * we just actually enable it here on activation time.
+ */
+
/* psr1 and psr2 are mutually exclusive.*/
if (dev_priv->psr.psr2_support)
- intel_enable_source_psr2(intel_dp);
+ hsw_activate_psr2(intel_dp);
else
- intel_enable_source_psr1(intel_dp);
+ hsw_activate_psr1(intel_dp);
}
-static bool intel_psr_match_conditions(struct intel_dp *intel_dp)
+void intel_psr_compute_config(struct intel_dp *intel_dp,
+ struct intel_crtc_state *crtc_state)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
- struct drm_device *dev = dig_port->base.base.dev;
- struct drm_i915_private *dev_priv = to_i915(dev);
- struct drm_crtc *crtc = dig_port->base.base.crtc;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
const struct drm_display_mode *adjusted_mode =
- &intel_crtc->config->base.adjusted_mode;
+ &crtc_state->base.adjusted_mode;
int psr_setup_time;
- lockdep_assert_held(&dev_priv->psr.lock);
- WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
- WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
+ if (!HAS_PSR(dev_priv))
+ return;
+
+ if (!is_edp_psr(intel_dp))
+ return;
- dev_priv->psr.source_ok = false;
+ if (!i915_modparams.enable_psr) {
+ DRM_DEBUG_KMS("PSR disable by flag\n");
+ return;
+ }
/*
* HSW spec explicitly says PSR is tied to port A.
@@ -394,66 +378,70 @@ static bool intel_psr_match_conditions(struct intel_dp *intel_dp)
*/
if (HAS_DDI(dev_priv) && dig_port->port != PORT_A) {
DRM_DEBUG_KMS("PSR condition failed: Port not supported\n");
- return false;
- }
-
- if (!i915.enable_psr) {
- DRM_DEBUG_KMS("PSR disable by flag\n");
- return false;
+ return;
}
if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
!dev_priv->psr.link_standby) {
DRM_ERROR("PSR condition failed: Link off requested but not supported on this platform\n");
- return false;
+ return;
}
if (IS_HASWELL(dev_priv) &&
- I915_READ(HSW_STEREO_3D_CTL(intel_crtc->config->cpu_transcoder)) &
+ I915_READ(HSW_STEREO_3D_CTL(crtc_state->cpu_transcoder)) &
S3D_ENABLE) {
DRM_DEBUG_KMS("PSR condition failed: Stereo 3D is Enabled\n");
- return false;
+ return;
}
if (IS_HASWELL(dev_priv) &&
adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
DRM_DEBUG_KMS("PSR condition failed: Interlaced is Enabled\n");
- return false;
+ return;
}
psr_setup_time = drm_dp_psr_setup_time(intel_dp->psr_dpcd);
if (psr_setup_time < 0) {
DRM_DEBUG_KMS("PSR condition failed: Invalid PSR setup time (0x%02x)\n",
intel_dp->psr_dpcd[1]);
- return false;
+ return;
}
if (intel_usecs_to_scanlines(adjusted_mode, psr_setup_time) >
adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vdisplay - 1) {
DRM_DEBUG_KMS("PSR condition failed: PSR setup time (%d us) too long\n",
psr_setup_time);
- return false;
+ return;
+ }
+
+ /*
+ * FIXME psr2_support is messed up. It's both computed
+ * dynamically during PSR enable, and extracted from sink
+ * caps during eDP detection.
+ */
+ if (!dev_priv->psr.psr2_support) {
+ crtc_state->has_psr = true;
+ return;
}
/* PSR2 is restricted to work with panel resolutions upto 3200x2000 */
- if (dev_priv->psr.psr2_support &&
- (intel_crtc->config->pipe_src_w > 3200 ||
- intel_crtc->config->pipe_src_h > 2000)) {
- dev_priv->psr.psr2_support = false;
- return false;
+ if (adjusted_mode->crtc_hdisplay > 3200 ||
+ adjusted_mode->crtc_vdisplay > 2000) {
+ DRM_DEBUG_KMS("PSR2 disabled, panel resolution too big\n");
+ return;
}
/*
* FIXME:enable psr2 only for y-cordinate psr2 panels
* After gtc implementation , remove this restriction.
*/
- if (!dev_priv->psr.y_cord_support && dev_priv->psr.psr2_support) {
+ if (!dev_priv->psr.y_cord_support) {
DRM_DEBUG_KMS("PSR2 disabled, panel does not support Y coordinate\n");
- return false;
+ return;
}
- dev_priv->psr.source_ok = true;
- return true;
+ crtc_state->has_psr = true;
+ crtc_state->has_psr2 = true;
}
static void intel_psr_activate(struct intel_dp *intel_dp)
@@ -469,153 +457,133 @@ static void intel_psr_activate(struct intel_dp *intel_dp)
WARN_ON(dev_priv->psr.active);
lockdep_assert_held(&dev_priv->psr.lock);
- /* Enable/Re-enable PSR on the host */
- if (HAS_DDI(dev_priv))
- /* On HSW+ after we enable PSR on source it will activate it
- * as soon as it match configure idle_frame count. So
- * we just actually enable it here on activation time.
- */
- hsw_psr_enable_source(intel_dp);
- else
- vlv_psr_activate(intel_dp);
-
+ dev_priv->psr.activate(intel_dp);
dev_priv->psr.active = true;
}
+static void hsw_psr_enable_source(struct intel_dp *intel_dp,
+ const struct intel_crtc_state *crtc_state)
+{
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
+ u32 chicken;
+
+ if (dev_priv->psr.psr2_support) {
+ chicken = PSR2_VSC_ENABLE_PROG_HEADER;
+ if (dev_priv->psr.y_cord_support)
+ chicken |= PSR2_ADD_VERTICAL_LINE_COUNT;
+ I915_WRITE(CHICKEN_TRANS(cpu_transcoder), chicken);
+
+ I915_WRITE(EDP_PSR_DEBUG_CTL,
+ EDP_PSR_DEBUG_MASK_MEMUP |
+ EDP_PSR_DEBUG_MASK_HPD |
+ EDP_PSR_DEBUG_MASK_LPSP |
+ EDP_PSR_DEBUG_MASK_MAX_SLEEP |
+ EDP_PSR_DEBUG_MASK_DISP_REG_WRITE);
+ } else {
+ /*
+ * Per Spec: Avoid continuous PSR exit by masking MEMUP
+ * and HPD. also mask LPSP to avoid dependency on other
+ * drivers that might block runtime_pm besides
+ * preventing other hw tracking issues now we can rely
+ * on frontbuffer tracking.
+ */
+ I915_WRITE(EDP_PSR_DEBUG_CTL,
+ EDP_PSR_DEBUG_MASK_MEMUP |
+ EDP_PSR_DEBUG_MASK_HPD |
+ EDP_PSR_DEBUG_MASK_LPSP);
+ }
+}
+
/**
* intel_psr_enable - Enable PSR
* @intel_dp: Intel DP
+ * @crtc_state: new CRTC state
*
* This function can only be called after the pipe is fully trained and enabled.
*/
-void intel_psr_enable(struct intel_dp *intel_dp)
+void intel_psr_enable(struct intel_dp *intel_dp,
+ const struct intel_crtc_state *crtc_state)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
- struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
- enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
- u32 chicken;
- if (!HAS_PSR(dev_priv)) {
- DRM_DEBUG_KMS("PSR not supported on this platform\n");
+ if (!crtc_state->has_psr)
return;
- }
-
- if (!is_edp_psr(intel_dp)) {
- DRM_DEBUG_KMS("PSR not supported by this panel\n");
- return;
- }
+ WARN_ON(dev_priv->drrs.dp);
mutex_lock(&dev_priv->psr.lock);
if (dev_priv->psr.enabled) {
DRM_DEBUG_KMS("PSR already in use\n");
goto unlock;
}
- if (!intel_psr_match_conditions(intel_dp))
- goto unlock;
+ dev_priv->psr.psr2_support = crtc_state->has_psr2;
+ dev_priv->psr.source_ok = true;
dev_priv->psr.busy_frontbuffer_bits = 0;
- if (HAS_DDI(dev_priv)) {
- if (dev_priv->psr.psr2_support) {
- skl_psr_setup_su_vsc(intel_dp);
- chicken = PSR2_VSC_ENABLE_PROG_HEADER;
- if (dev_priv->psr.y_cord_support)
- chicken |= PSR2_ADD_VERTICAL_LINE_COUNT;
- I915_WRITE(CHICKEN_TRANS(cpu_transcoder), chicken);
- I915_WRITE(EDP_PSR_DEBUG_CTL,
- EDP_PSR_DEBUG_MASK_MEMUP |
- EDP_PSR_DEBUG_MASK_HPD |
- EDP_PSR_DEBUG_MASK_LPSP |
- EDP_PSR_DEBUG_MASK_MAX_SLEEP |
- EDP_PSR_DEBUG_MASK_DISP_REG_WRITE);
- } else {
- /* set up vsc header for psr1 */
- hsw_psr_setup_vsc(intel_dp);
- /*
- * Per Spec: Avoid continuous PSR exit by masking MEMUP
- * and HPD. also mask LPSP to avoid dependency on other
- * drivers that might block runtime_pm besides
- * preventing other hw tracking issues now we can rely
- * on frontbuffer tracking.
- */
- I915_WRITE(EDP_PSR_DEBUG_CTL,
- EDP_PSR_DEBUG_MASK_MEMUP |
- EDP_PSR_DEBUG_MASK_HPD |
- EDP_PSR_DEBUG_MASK_LPSP);
- }
-
- /* Enable PSR on the panel */
- hsw_psr_enable_sink(intel_dp);
+ dev_priv->psr.setup_vsc(intel_dp, crtc_state);
+ dev_priv->psr.enable_sink(intel_dp);
+ dev_priv->psr.enable_source(intel_dp, crtc_state);
+ dev_priv->psr.enabled = intel_dp;
- if (INTEL_GEN(dev_priv) >= 9)
- intel_psr_activate(intel_dp);
+ if (INTEL_GEN(dev_priv) >= 9) {
+ intel_psr_activate(intel_dp);
} else {
- vlv_psr_setup_vsc(intel_dp);
-
- /* Enable PSR on the panel */
- vlv_psr_enable_sink(intel_dp);
-
- /* On HSW+ enable_source also means go to PSR entry/active
- * state as soon as idle_frame achieved and here would be
- * to soon. However on VLV enable_source just enable PSR
- * but let it on inactive state. So we might do this prior
- * to active transition, i.e. here.
+ /*
+ * FIXME: Activation should happen immediately since this
+ * function is just called after pipe is fully trained and
+ * enabled.
+ * However on some platforms we face issues when first
+ * activation follows a modeset so quickly.
+ * - On VLV/CHV we get bank screen on first activation
+ * - On HSW/BDW we get a recoverable frozen screen until
+ * next exit-activate sequence.
*/
- vlv_psr_enable_source(intel_dp);
- }
-
- /*
- * FIXME: Activation should happen immediately since this function
- * is just called after pipe is fully trained and enabled.
- * However on every platform we face issues when first activation
- * follows a modeset so quickly.
- * - On VLV/CHV we get bank screen on first activation
- * - On HSW/BDW we get a recoverable frozen screen until next
- * exit-activate sequence.
- */
- if (INTEL_GEN(dev_priv) < 9)
schedule_delayed_work(&dev_priv->psr.work,
msecs_to_jiffies(intel_dp->panel_power_cycle_delay * 5));
+ }
- dev_priv->psr.enabled = intel_dp;
unlock:
mutex_unlock(&dev_priv->psr.lock);
}
-static void vlv_psr_disable(struct intel_dp *intel_dp)
+static void vlv_psr_disable(struct intel_dp *intel_dp,
+ const struct intel_crtc_state *old_crtc_state)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
- struct intel_crtc *intel_crtc =
- to_intel_crtc(intel_dig_port->base.base.crtc);
+ struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
uint32_t val;
if (dev_priv->psr.active) {
- /* Put VLV PSR back to PSR_state 0 that is PSR Disabled. */
+ /* Put VLV PSR back to PSR_state 0 (disabled). */
if (intel_wait_for_register(dev_priv,
- VLV_PSRSTAT(intel_crtc->pipe),
+ VLV_PSRSTAT(crtc->pipe),
VLV_EDP_PSR_IN_TRANS,
0,
1))
WARN(1, "PSR transition took longer than expected\n");
- val = I915_READ(VLV_PSRCTL(intel_crtc->pipe));
+ val = I915_READ(VLV_PSRCTL(crtc->pipe));
val &= ~VLV_EDP_PSR_ACTIVE_ENTRY;
val &= ~VLV_EDP_PSR_ENABLE;
val &= ~VLV_EDP_PSR_MODE_MASK;
- I915_WRITE(VLV_PSRCTL(intel_crtc->pipe), val);
+ I915_WRITE(VLV_PSRCTL(crtc->pipe), val);
dev_priv->psr.active = false;
} else {
- WARN_ON(vlv_is_psr_active_on_pipe(dev, intel_crtc->pipe));
+ WARN_ON(vlv_is_psr_active_on_pipe(dev, crtc->pipe));
}
}
-static void hsw_psr_disable(struct intel_dp *intel_dp)
+static void hsw_psr_disable(struct intel_dp *intel_dp,
+ const struct intel_crtc_state *old_crtc_state)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
@@ -664,26 +632,27 @@ static void hsw_psr_disable(struct intel_dp *intel_dp)
/**
* intel_psr_disable - Disable PSR
* @intel_dp: Intel DP
+ * @old_crtc_state: old CRTC state
*
* This function needs to be called before disabling pipe.
*/
-void intel_psr_disable(struct intel_dp *intel_dp)
+void intel_psr_disable(struct intel_dp *intel_dp,
+ const struct intel_crtc_state *old_crtc_state)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
+ if (!old_crtc_state->has_psr)
+ return;
+
mutex_lock(&dev_priv->psr.lock);
if (!dev_priv->psr.enabled) {
mutex_unlock(&dev_priv->psr.lock);
return;
}
- /* Disable PSR on Source */
- if (HAS_DDI(dev_priv))
- hsw_psr_disable(intel_dp);
- else
- vlv_psr_disable(intel_dp);
+ dev_priv->psr.disable_source(intel_dp, old_crtc_state);
/* Disable PSR on Sink */
drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, 0);
@@ -783,17 +752,20 @@ static void intel_psr_exit(struct drm_i915_private *dev_priv)
} else {
val = I915_READ(VLV_PSRCTL(pipe));
- /* Here we do the transition from PSR_state 3 to PSR_state 5
- * directly once PSR State 4 that is active with single frame
- * update can be skipped. PSR_state 5 that is PSR exit then
- * Hardware is responsible to transition back to PSR_state 1
- * that is PSR inactive. Same state after
- * vlv_edp_psr_enable_source.
+ /*
+ * Here we do the transition drirectly from
+ * PSR_state 3 (active - no Remote Frame Buffer (RFB) update) to
+ * PSR_state 5 (exit).
+ * PSR State 4 (active with single frame update) can be skipped.
+ * On PSR_state 5 (exit) Hardware is responsible to transition
+ * back to PSR_state 1 (inactive).
+ * Now we are at Same state after vlv_psr_enable_source.
*/
val &= ~VLV_EDP_PSR_ACTIVE_ENTRY;
I915_WRITE(VLV_PSRCTL(pipe), val);
- /* Send AUX wake up - Spec says after transitioning to PSR
+ /*
+ * Send AUX wake up - Spec says after transitioning to PSR
* active we have to send AUX wake up by writing 01h in DPCD
* 600h of sink device.
* XXX: This might slow down the transition, but without this
@@ -824,6 +796,9 @@ void intel_psr_single_frame_update(struct drm_i915_private *dev_priv,
enum pipe pipe;
u32 val;
+ if (!HAS_PSR(dev_priv))
+ return;
+
/*
* Single frame update is already supported on BDW+ but it requires
* many W/A and it isn't really needed.
@@ -870,6 +845,9 @@ void intel_psr_invalidate(struct drm_i915_private *dev_priv,
struct drm_crtc *crtc;
enum pipe pipe;
+ if (!HAS_PSR(dev_priv))
+ return;
+
mutex_lock(&dev_priv->psr.lock);
if (!dev_priv->psr.enabled) {
mutex_unlock(&dev_priv->psr.lock);
@@ -907,6 +885,9 @@ void intel_psr_flush(struct drm_i915_private *dev_priv,
struct drm_crtc *crtc;
enum pipe pipe;
+ if (!HAS_PSR(dev_priv))
+ return;
+
mutex_lock(&dev_priv->psr.lock);
if (!dev_priv->psr.enabled) {
mutex_unlock(&dev_priv->psr.lock);
@@ -939,12 +920,15 @@ void intel_psr_flush(struct drm_i915_private *dev_priv,
*/
void intel_psr_init(struct drm_i915_private *dev_priv)
{
+ if (!HAS_PSR(dev_priv))
+ return;
+
dev_priv->psr_mmio_base = IS_HASWELL(dev_priv) ?
HSW_EDP_PSR_BASE : BDW_EDP_PSR_BASE;
/* Per platform default: all disabled. */
- if (i915.enable_psr == -1)
- i915.enable_psr = 0;
+ if (i915_modparams.enable_psr == -1)
+ i915_modparams.enable_psr = 0;
/* Set link_standby x link_off defaults */
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
@@ -958,15 +942,29 @@ void intel_psr_init(struct drm_i915_private *dev_priv)
dev_priv->psr.link_standby = dev_priv->vbt.psr.full_link;
/* Override link_standby x link_off defaults */
- if (i915.enable_psr == 2 && !dev_priv->psr.link_standby) {
+ if (i915_modparams.enable_psr == 2 && !dev_priv->psr.link_standby) {
DRM_DEBUG_KMS("PSR: Forcing link standby\n");
dev_priv->psr.link_standby = true;
}
- if (i915.enable_psr == 3 && dev_priv->psr.link_standby) {
+ if (i915_modparams.enable_psr == 3 && dev_priv->psr.link_standby) {
DRM_DEBUG_KMS("PSR: Forcing main link off\n");
dev_priv->psr.link_standby = false;
}
INIT_DELAYED_WORK(&dev_priv->psr.work, intel_psr_work);
mutex_init(&dev_priv->psr.lock);
+
+ if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
+ dev_priv->psr.enable_source = vlv_psr_enable_source;
+ dev_priv->psr.disable_source = vlv_psr_disable;
+ dev_priv->psr.enable_sink = vlv_psr_enable_sink;
+ dev_priv->psr.activate = vlv_psr_activate;
+ dev_priv->psr.setup_vsc = vlv_psr_setup_vsc;
+ } else {
+ dev_priv->psr.enable_source = hsw_psr_enable_source;
+ dev_priv->psr.disable_source = hsw_psr_disable;
+ dev_priv->psr.enable_sink = hsw_psr_enable_sink;
+ dev_priv->psr.activate = hsw_psr_activate;
+ dev_priv->psr.setup_vsc = hsw_psr_setup_vsc;
+ }
}