diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_lvds.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_lvds.c | 82 |
1 files changed, 35 insertions, 47 deletions
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 2e8ddfcba40c..31da77f5c051 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -72,14 +72,16 @@ static void intel_lvds_enable(struct intel_lvds *intel_lvds) { struct drm_device *dev = intel_lvds->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - u32 ctl_reg, lvds_reg; + u32 ctl_reg, lvds_reg, stat_reg; if (HAS_PCH_SPLIT(dev)) { ctl_reg = PCH_PP_CONTROL; lvds_reg = PCH_LVDS; + stat_reg = PCH_PP_STATUS; } else { ctl_reg = PP_CONTROL; lvds_reg = LVDS; + stat_reg = PP_STATUS; } I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN); @@ -94,17 +96,16 @@ static void intel_lvds_enable(struct intel_lvds *intel_lvds) DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n", intel_lvds->pfit_control, intel_lvds->pfit_pgm_ratios); - if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) { - DRM_ERROR("timed out waiting for panel to power off\n"); - } else { - I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios); - I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control); - intel_lvds->pfit_dirty = false; - } + + I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios); + I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control); + intel_lvds->pfit_dirty = false; } I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON); POSTING_READ(lvds_reg); + if (wait_for((I915_READ(stat_reg) & PP_ON) != 0, 1000)) + DRM_ERROR("timed out waiting for panel to power on\n"); intel_panel_enable_backlight(dev); } @@ -113,24 +114,25 @@ static void intel_lvds_disable(struct intel_lvds *intel_lvds) { struct drm_device *dev = intel_lvds->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - u32 ctl_reg, lvds_reg; + u32 ctl_reg, lvds_reg, stat_reg; if (HAS_PCH_SPLIT(dev)) { ctl_reg = PCH_PP_CONTROL; lvds_reg = PCH_LVDS; + stat_reg = PCH_PP_STATUS; } else { ctl_reg = PP_CONTROL; lvds_reg = LVDS; + stat_reg = PP_STATUS; } intel_panel_disable_backlight(dev); I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON); + if (wait_for((I915_READ(stat_reg) & PP_ON) == 0, 1000)) + DRM_ERROR("timed out waiting for panel to power off\n"); if (intel_lvds->pfit_control) { - if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) - DRM_ERROR("timed out waiting for panel to power off\n"); - I915_WRITE(PFIT_CONTROL, 0); intel_lvds->pfit_dirty = true; } @@ -398,53 +400,21 @@ out: static void intel_lvds_prepare(struct drm_encoder *encoder) { - struct drm_device *dev = encoder->dev; - struct drm_i915_private *dev_priv = dev->dev_private; struct intel_lvds *intel_lvds = to_intel_lvds(encoder); - /* We try to do the minimum that is necessary in order to unlock - * the registers for mode setting. - * - * On Ironlake, this is quite simple as we just set the unlock key - * and ignore all subtleties. (This may cause some issues...) - * + /* * Prior to Ironlake, we must disable the pipe if we want to adjust * the panel fitter. However at all other times we can just reset * the registers regardless. */ - - if (HAS_PCH_SPLIT(dev)) { - I915_WRITE(PCH_PP_CONTROL, - I915_READ(PCH_PP_CONTROL) | PANEL_UNLOCK_REGS); - } else if (intel_lvds->pfit_dirty) { - I915_WRITE(PP_CONTROL, - (I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS) - & ~POWER_TARGET_ON); - } else { - I915_WRITE(PP_CONTROL, - I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS); - } + if (!HAS_PCH_SPLIT(encoder->dev) && intel_lvds->pfit_dirty) + intel_lvds_disable(intel_lvds); } static void intel_lvds_commit(struct drm_encoder *encoder) { - struct drm_device *dev = encoder->dev; - struct drm_i915_private *dev_priv = dev->dev_private; struct intel_lvds *intel_lvds = to_intel_lvds(encoder); - /* Undo any unlocking done in prepare to prevent accidental - * adjustment of the registers. - */ - if (HAS_PCH_SPLIT(dev)) { - u32 val = I915_READ(PCH_PP_CONTROL); - if ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS) - I915_WRITE(PCH_PP_CONTROL, val & 0x3); - } else { - u32 val = I915_READ(PP_CONTROL); - if ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS) - I915_WRITE(PP_CONTROL, val & 0x3); - } - /* Always do a full power on as we do not know what state * we were left in. */ @@ -582,6 +552,8 @@ static void intel_lvds_destroy(struct drm_connector *connector) struct drm_device *dev = connector->dev; struct drm_i915_private *dev_priv = dev->dev_private; + intel_panel_destroy_backlight(dev); + if (dev_priv->lid_notifier.notifier_call) acpi_lid_notifier_unregister(&dev_priv->lid_notifier); drm_sysfs_connector_remove(connector); @@ -1040,6 +1012,19 @@ out: pwm = I915_READ(BLC_PWM_PCH_CTL1); pwm |= PWM_PCH_ENABLE; I915_WRITE(BLC_PWM_PCH_CTL1, pwm); + /* + * Unlock registers and just + * leave them unlocked + */ + I915_WRITE(PCH_PP_CONTROL, + I915_READ(PCH_PP_CONTROL) | PANEL_UNLOCK_REGS); + } else { + /* + * Unlock registers and just + * leave them unlocked + */ + I915_WRITE(PP_CONTROL, + I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS); } dev_priv->lid_notifier.notifier_call = intel_lid_notify; if (acpi_lid_notifier_register(&dev_priv->lid_notifier)) { @@ -1049,6 +1034,9 @@ out: /* keep the LVDS connector */ dev_priv->int_lvds_connector = connector; drm_sysfs_connector_add(connector); + + intel_panel_setup_backlight(dev); + return true; failed: |