diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_dp.c')
-rw-r--r-- | drivers/gpu/drm/i915/intel_dp.c | 374 |
1 files changed, 222 insertions, 152 deletions
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index fb3715b4b09d..f61cb7998c72 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -148,15 +148,6 @@ intel_dp_max_link_bw(struct intel_dp *intel_dp) return max_link_bw; } -static int -intel_dp_link_clock(uint8_t link_bw) -{ - if (link_bw == DP_LINK_BW_2_7) - return 270000; - else - return 162000; -} - /* * The units on the numbers in the next two are... bizarre. Examples will * make it clearer; this one parallels an example in the eDP spec. @@ -191,7 +182,8 @@ intel_dp_adjust_dithering(struct intel_dp *intel_dp, struct drm_display_mode *mode, bool adjust_mode) { - int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp)); + int max_link_clock = + drm_dp_bw_code_to_link_rate(intel_dp_max_link_bw(intel_dp)); int max_lanes = drm_dp_max_lane_count(intel_dp->dpcd); int max_rate, mode_rate; @@ -330,6 +322,48 @@ intel_dp_check_edp(struct intel_dp *intel_dp) } } +static uint32_t +intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t ch_ctl = intel_dp->output_reg + 0x10; + uint32_t status; + bool done; + + if (IS_HASWELL(dev)) { + switch (intel_dig_port->port) { + case PORT_A: + ch_ctl = DPA_AUX_CH_CTL; + break; + case PORT_B: + ch_ctl = PCH_DPB_AUX_CH_CTL; + break; + case PORT_C: + ch_ctl = PCH_DPC_AUX_CH_CTL; + break; + case PORT_D: + ch_ctl = PCH_DPD_AUX_CH_CTL; + break; + default: + BUG(); + } + } + +#define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0) + if (has_aux_irq) + done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, 10); + else + done = wait_for_atomic(C, 10) == 0; + if (!done) + DRM_ERROR("dp aux hw did not signal timeout (has irq: %i)!\n", + has_aux_irq); +#undef C + + return status; +} + static int intel_dp_aux_ch(struct intel_dp *intel_dp, uint8_t *send, int send_bytes, @@ -341,11 +375,17 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, struct drm_i915_private *dev_priv = dev->dev_private; uint32_t ch_ctl = output_reg + 0x10; uint32_t ch_data = ch_ctl + 4; - int i; - int recv_bytes; + int i, ret, recv_bytes; uint32_t status; uint32_t aux_clock_divider; int try, precharge; + bool has_aux_irq = INTEL_INFO(dev)->gen >= 5 && !IS_VALLEYVIEW(dev); + + /* dp aux is extremely sensitive to irq latency, hence request the + * lowest possible wakeup latency and so prevent the cpu from going into + * deep sleep states. + */ + pm_qos_update_request(&dev_priv->pm_qos, 0); if (IS_HASWELL(dev)) { switch (intel_dig_port->port) { @@ -379,7 +419,7 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, * clock divider. */ if (is_cpu_edp(intel_dp)) { - if (IS_HASWELL(dev)) + if (HAS_DDI(dev)) aux_clock_divider = intel_ddi_get_cdclk_freq(dev_priv) >> 1; else if (IS_VALLEYVIEW(dev)) aux_clock_divider = 100; @@ -399,7 +439,7 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, /* Try to wait for any previous AUX channel activity */ for (try = 0; try < 3; try++) { - status = I915_READ(ch_ctl); + status = I915_READ_NOTRACE(ch_ctl); if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0) break; msleep(1); @@ -408,7 +448,8 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, if (try == 3) { WARN(1, "dp_aux_ch not started status 0x%08x\n", I915_READ(ch_ctl)); - return -EBUSY; + ret = -EBUSY; + goto out; } /* Must try at least 3 times according to DP spec */ @@ -421,6 +462,7 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, /* Send the command and wait for it to complete */ I915_WRITE(ch_ctl, DP_AUX_CH_CTL_SEND_BUSY | + (has_aux_irq ? DP_AUX_CH_CTL_INTERRUPT : 0) | DP_AUX_CH_CTL_TIME_OUT_400us | (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) | @@ -428,12 +470,8 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, DP_AUX_CH_CTL_DONE | DP_AUX_CH_CTL_TIME_OUT_ERROR | DP_AUX_CH_CTL_RECEIVE_ERROR); - for (;;) { - status = I915_READ(ch_ctl); - if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0) - break; - udelay(100); - } + + status = intel_dp_aux_wait_done(intel_dp, has_aux_irq); /* Clear done status and any errors */ I915_WRITE(ch_ctl, @@ -451,7 +489,8 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, if ((status & DP_AUX_CH_CTL_DONE) == 0) { DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status); - return -EBUSY; + ret = -EBUSY; + goto out; } /* Check for timeout or receive error. @@ -459,14 +498,16 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, */ if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) { DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status); - return -EIO; + ret = -EIO; + goto out; } /* Timeouts occur when the device isn't connected, so they're * "normal" -- don't fill the kernel log with these */ if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) { DRM_DEBUG_KMS("dp_aux_ch timeout status 0x%08x\n", status); - return -ETIMEDOUT; + ret = -ETIMEDOUT; + goto out; } /* Unload any bytes sent back from the other side */ @@ -479,7 +520,11 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, unpack_aux(I915_READ(ch_data + i), recv + i, recv_bytes - i); - return recv_bytes; + ret = recv_bytes; +out: + pm_qos_update_request(&dev_priv->pm_qos, PM_QOS_DEFAULT_VALUE); + + return ret; } /* Write data to the aux channel in native mode */ @@ -718,16 +763,35 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, return false; bpp = adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 24; + + if (intel_dp->color_range_auto) { + /* + * See: + * CEA-861-E - 5.1 Default Encoding Parameters + * VESA DisplayPort Ver.1.2a - 5.1.1.1 Video Colorimetry + */ + if (bpp != 18 && drm_match_cea_mode(adjusted_mode) > 1) + intel_dp->color_range = DP_COLOR_RANGE_16_235; + else + intel_dp->color_range = 0; + } + + if (intel_dp->color_range) + adjusted_mode->private_flags |= INTEL_MODE_LIMITED_COLOR_RANGE; + mode_rate = intel_dp_link_required(adjusted_mode->clock, bpp); for (clock = 0; clock <= max_clock; clock++) { for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) { - int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count); + int link_bw_clock = + drm_dp_bw_code_to_link_rate(bws[clock]); + int link_avail = intel_dp_max_data_rate(link_bw_clock, + lane_count); if (mode_rate <= link_avail) { intel_dp->link_bw = bws[clock]; intel_dp->lane_count = lane_count; - adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw); + adjusted_mode->clock = link_bw_clock; DRM_DEBUG_KMS("DP link bw %02x lane " "count %d clock %d bpp %d\n", intel_dp->link_bw, intel_dp->lane_count, @@ -742,39 +806,6 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, return false; } -struct intel_dp_m_n { - uint32_t tu; - uint32_t gmch_m; - uint32_t gmch_n; - uint32_t link_m; - uint32_t link_n; -}; - -static void -intel_reduce_ratio(uint32_t *num, uint32_t *den) -{ - while (*num > 0xffffff || *den > 0xffffff) { - *num >>= 1; - *den >>= 1; - } -} - -static void -intel_dp_compute_m_n(int bpp, - int nlanes, - int pixel_clock, - int link_clock, - struct intel_dp_m_n *m_n) -{ - m_n->tu = 64; - m_n->gmch_m = (pixel_clock * bpp) >> 3; - m_n->gmch_n = link_clock * nlanes; - intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); - m_n->link_m = pixel_clock; - m_n->link_n = link_clock; - intel_reduce_ratio(&m_n->link_m, &m_n->link_n); -} - void intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) @@ -785,7 +816,7 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int lane_count = 4; - struct intel_dp_m_n m_n; + struct intel_link_m_n m_n; int pipe = intel_crtc->pipe; enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder; @@ -808,8 +839,8 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, * the number of bytes_per_pixel post-LUT, which we always * set up for 8-bits of R/G/B, or 3 bytes total. */ - intel_dp_compute_m_n(intel_crtc->bpp, lane_count, - mode->clock, adjusted_mode->clock, &m_n); + intel_link_compute_m_n(intel_crtc->bpp, lane_count, + mode->clock, adjusted_mode->clock, &m_n); if (IS_HASWELL(dev)) { I915_WRITE(PIPE_DATA_M1(cpu_transcoder), @@ -851,6 +882,32 @@ void intel_dp_init_link_config(struct intel_dp *intel_dp) } } +static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + u32 dpa_ctl; + + DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock); + dpa_ctl = I915_READ(DP_A); + dpa_ctl &= ~DP_PLL_FREQ_MASK; + + if (clock < 200000) { + /* For a long time we've carried around a ILK-DevA w/a for the + * 160MHz clock. If we're really unlucky, it's still required. + */ + DRM_DEBUG_KMS("160MHz cpu eDP clock, might need ilk devA w/a\n"); + dpa_ctl |= DP_PLL_FREQ_160MHZ; + } else { + dpa_ctl |= DP_PLL_FREQ_270MHZ; + } + + I915_WRITE(DP_A, dpa_ctl); + + POSTING_READ(DP_A); + udelay(500); +} + static void intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) @@ -926,7 +983,8 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, else intel_dp->DP |= DP_PLL_FREQ_270MHZ; } else if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) { - intel_dp->DP |= intel_dp->color_range; + if (!HAS_PCH_SPLIT(dev)) + intel_dp->DP |= intel_dp->color_range; if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) intel_dp->DP |= DP_SYNC_HS_HIGH; @@ -950,6 +1008,9 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, } else { intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; } + + if (is_cpu_edp(intel_dp)) + ironlake_set_pll_edp(crtc, adjusted_mode->clock); } #define IDLE_ON_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK) @@ -1057,6 +1118,8 @@ static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp) struct drm_i915_private *dev_priv = dev->dev_private; u32 pp; + WARN_ON(!mutex_is_locked(&dev->mode_config.mutex)); + if (!intel_dp->want_panel_vdd && ironlake_edp_have_panel_vdd(intel_dp)) { pp = ironlake_get_pp_control(dev_priv); pp &= ~EDP_FORCE_VDD; @@ -1543,7 +1606,7 @@ intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_ST } static uint32_t -intel_dp_signal_levels(uint8_t train_set) +intel_gen4_signal_levels(uint8_t train_set) { uint32_t signal_levels = 0; @@ -1641,7 +1704,7 @@ intel_gen7_edp_signal_levels(uint8_t train_set) /* Gen7.5's (HSW) DP voltage swing and pre-emphasis control */ static uint32_t -intel_dp_signal_levels_hsw(uint8_t train_set) +intel_hsw_signal_levels(uint8_t train_set) { int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | DP_TRAIN_PRE_EMPHASIS_MASK); @@ -1673,6 +1736,34 @@ intel_dp_signal_levels_hsw(uint8_t train_set) } } +/* Properly updates "DP" with the correct signal levels. */ +static void +intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + uint32_t signal_levels, mask; + uint8_t train_set = intel_dp->train_set[0]; + + if (IS_HASWELL(dev)) { + signal_levels = intel_hsw_signal_levels(train_set); + mask = DDI_BUF_EMP_MASK; + } else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) { + signal_levels = intel_gen7_edp_signal_levels(train_set); + mask = EDP_LINK_TRAIN_VOL_EMP_MASK_IVB; + } else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) { + signal_levels = intel_gen6_edp_signal_levels(train_set); + mask = EDP_LINK_TRAIN_VOL_EMP_MASK_SNB; + } else { + signal_levels = intel_gen4_signal_levels(train_set); + mask = DP_VOLTAGE_MASK | DP_PRE_EMPHASIS_MASK; + } + + DRM_DEBUG_KMS("Using signal levels %08x\n", signal_levels); + + *DP = (*DP & ~mask) | signal_levels; +} + static bool intel_dp_set_link_train(struct intel_dp *intel_dp, uint32_t dp_reg_value, @@ -1696,14 +1787,18 @@ intel_dp_set_link_train(struct intel_dp *intel_dp, temp &= ~DP_TP_CTL_LINK_TRAIN_MASK; switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) { case DP_TRAINING_PATTERN_DISABLE: - temp |= DP_TP_CTL_LINK_TRAIN_IDLE; - I915_WRITE(DP_TP_CTL(port), temp); - if (wait_for((I915_READ(DP_TP_STATUS(port)) & - DP_TP_STATUS_IDLE_DONE), 1)) - DRM_ERROR("Timed out waiting for DP idle patterns\n"); + if (port != PORT_A) { + temp |= DP_TP_CTL_LINK_TRAIN_IDLE; + I915_WRITE(DP_TP_CTL(port), temp); + + if (wait_for((I915_READ(DP_TP_STATUS(port)) & + DP_TP_STATUS_IDLE_DONE), 1)) + DRM_ERROR("Timed out waiting for DP idle patterns\n"); + + temp &= ~DP_TP_CTL_LINK_TRAIN_MASK; + } - temp &= ~DP_TP_CTL_LINK_TRAIN_MASK; temp |= DP_TP_CTL_LINK_TRAIN_NORMAL; break; @@ -1791,7 +1886,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) int voltage_tries, loop_tries; uint32_t DP = intel_dp->DP; - if (IS_HASWELL(dev)) + if (HAS_DDI(dev)) intel_ddi_prepare_link_retrain(encoder); /* Write the link configuration data */ @@ -1809,24 +1904,8 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) for (;;) { /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ uint8_t link_status[DP_LINK_STATUS_SIZE]; - uint32_t signal_levels; - - if (IS_HASWELL(dev)) { - signal_levels = intel_dp_signal_levels_hsw( - intel_dp->train_set[0]); - DP = (DP & ~DDI_BUF_EMP_MASK) | signal_levels; - } else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) { - signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]); - DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels; - } else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) { - signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); - DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; - } else { - signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]); - DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; - } - DRM_DEBUG_KMS("training pattern 1 signal levels %08x\n", - signal_levels); + + intel_dp_set_signal_levels(intel_dp, &DP); /* Set training pattern 1 */ if (!intel_dp_set_link_train(intel_dp, DP, @@ -1882,7 +1961,6 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) void intel_dp_complete_link_train(struct intel_dp *intel_dp) { - struct drm_device *dev = intel_dp_to_dev(intel_dp); bool channel_eq = false; int tries, cr_tries; uint32_t DP = intel_dp->DP; @@ -1892,8 +1970,6 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) cr_tries = 0; channel_eq = false; for (;;) { - /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ - uint32_t signal_levels; uint8_t link_status[DP_LINK_STATUS_SIZE]; if (cr_tries > 5) { @@ -1902,19 +1978,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) break; } - if (IS_HASWELL(dev)) { - signal_levels = intel_dp_signal_levels_hsw(intel_dp->train_set[0]); - DP = (DP & ~DDI_BUF_EMP_MASK) | signal_levels; - } else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) { - signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]); - DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels; - } else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) { - signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); - DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; - } else { - signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]); - DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; - } + intel_dp_set_signal_levels(intel_dp, &DP); /* channel eq pattern */ if (!intel_dp_set_link_train(intel_dp, DP, @@ -1964,6 +2028,8 @@ intel_dp_link_down(struct intel_dp *intel_dp) struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); struct drm_device *dev = intel_dig_port->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = + to_intel_crtc(intel_dig_port->base.base.crtc); uint32_t DP = intel_dp->DP; /* @@ -1981,7 +2047,7 @@ intel_dp_link_down(struct intel_dp *intel_dp) * intel_ddi_prepare_link_retrain will take care of redoing the link * train. */ - if (IS_HASWELL(dev)) + if (HAS_DDI(dev)) return; if (WARN_ON((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0)) @@ -1998,7 +2064,8 @@ intel_dp_link_down(struct intel_dp *intel_dp) } POSTING_READ(intel_dp->output_reg); - msleep(17); + /* We don't really know why we're doing this */ + intel_wait_for_vblank(dev, intel_crtc->pipe); if (HAS_PCH_IBX(dev) && I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) { @@ -2018,19 +2085,14 @@ intel_dp_link_down(struct intel_dp *intel_dp) /* Changes to enable or select take place the vblank * after being written. */ - if (crtc == NULL) { - /* We can arrive here never having been attached - * to a CRTC, for instance, due to inheriting - * random state from the BIOS. - * - * If the pipe is not running, play safe and - * wait for the clocks to stabilise before - * continuing. - */ + if (WARN_ON(crtc == NULL)) { + /* We should never try to disable a port without a crtc + * attached. For paranoia keep the code around for a + * bit. */ POSTING_READ(intel_dp->output_reg); msleep(50); } else - intel_wait_for_vblank(dev, to_intel_crtc(crtc)->pipe); + intel_wait_for_vblank(dev, intel_crtc->pipe); } DP &= ~DP_AUDIO_OUTPUT_ENABLE; @@ -2042,10 +2104,16 @@ intel_dp_link_down(struct intel_dp *intel_dp) static bool intel_dp_get_dpcd(struct intel_dp *intel_dp) { + char dpcd_hex_dump[sizeof(intel_dp->dpcd) * 3]; + if (intel_dp_aux_native_read_retry(intel_dp, 0x000, intel_dp->dpcd, sizeof(intel_dp->dpcd)) == 0) return false; /* aux transfer failed */ + hex_dump_to_buffer(intel_dp->dpcd, sizeof(intel_dp->dpcd), + 32, 1, dpcd_hex_dump, sizeof(dpcd_hex_dump), false); + DRM_DEBUG_KMS("DPCD: %s\n", dpcd_hex_dump); + if (intel_dp->dpcd[DP_DPCD_REV] == 0) return false; /* DPCD not present */ @@ -2206,6 +2274,8 @@ static enum drm_connector_status ironlake_dp_detect(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); enum drm_connector_status status; /* Can't disconnect eDP, but you can close the lid... */ @@ -2216,6 +2286,9 @@ ironlake_dp_detect(struct intel_dp *intel_dp) return status; } + if (!ibx_digital_port_connected(dev_priv, intel_dig_port)) + return connector_status_disconnected; + return intel_dp_detect_dpcd(intel_dp); } @@ -2224,17 +2297,18 @@ g4x_dp_detect(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp_to_dev(intel_dp); struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); uint32_t bit; - switch (intel_dp->output_reg) { - case DP_B: - bit = DPB_HOTPLUG_LIVE_STATUS; + switch (intel_dig_port->port) { + case PORT_B: + bit = PORTB_HOTPLUG_LIVE_STATUS; break; - case DP_C: - bit = DPC_HOTPLUG_LIVE_STATUS; + case PORT_C: + bit = PORTC_HOTPLUG_LIVE_STATUS; break; - case DP_D: - bit = DPD_HOTPLUG_LIVE_STATUS; + case PORT_D: + bit = PORTD_HOTPLUG_LIVE_STATUS; break; default: return connector_status_unknown; @@ -2290,13 +2364,6 @@ intel_dp_get_edid_modes(struct drm_connector *connector, struct i2c_adapter *ada return intel_ddc_get_modes(connector, adapter); } - -/** - * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection. - * - * \return true if DP port is connected. - * \return false if DP port is disconnected. - */ static enum drm_connector_status intel_dp_detect(struct drm_connector *connector, bool force) { @@ -2306,7 +2373,6 @@ intel_dp_detect(struct drm_connector *connector, bool force) struct drm_device *dev = connector->dev; enum drm_connector_status status; struct edid *edid = NULL; - char dpcd_hex_dump[sizeof(intel_dp->dpcd) * 3]; intel_dp->has_audio = false; @@ -2315,10 +2381,6 @@ intel_dp_detect(struct drm_connector *connector, bool force) else status = g4x_dp_detect(intel_dp); - hex_dump_to_buffer(intel_dp->dpcd, sizeof(intel_dp->dpcd), - 32, 1, dpcd_hex_dump, sizeof(dpcd_hex_dump), false); - DRM_DEBUG_KMS("DPCD: %s\n", dpcd_hex_dump); - if (status != connector_status_connected) return status; @@ -2419,10 +2481,21 @@ intel_dp_set_property(struct drm_connector *connector, } if (property == dev_priv->broadcast_rgb_property) { - if (val == !!intel_dp->color_range) - return 0; - - intel_dp->color_range = val ? DP_COLOR_RANGE_16_235 : 0; + switch (val) { + case INTEL_BROADCAST_RGB_AUTO: + intel_dp->color_range_auto = true; + break; + case INTEL_BROADCAST_RGB_FULL: + intel_dp->color_range_auto = false; + intel_dp->color_range = 0; + break; + case INTEL_BROADCAST_RGB_LIMITED: + intel_dp->color_range_auto = false; + intel_dp->color_range = DP_COLOR_RANGE_16_235; + break; + default: + return -EINVAL; + } goto done; } @@ -2445,11 +2518,8 @@ intel_dp_set_property(struct drm_connector *connector, return -EINVAL; done: - if (intel_encoder->base.crtc) { - struct drm_crtc *crtc = intel_encoder->base.crtc; - intel_set_mode(crtc, &crtc->mode, - crtc->x, crtc->y, crtc->fb); - } + if (intel_encoder->base.crtc) + intel_crtc_restore_mode(intel_encoder->base.crtc); return 0; } @@ -2491,7 +2561,6 @@ void intel_dp_encoder_destroy(struct drm_encoder *encoder) static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = { .mode_fixup = intel_dp_mode_fixup, .mode_set = intel_dp_mode_set, - .disable = intel_encoder_noop, }; static const struct drm_connector_funcs intel_dp_connector_funcs = { @@ -2566,6 +2635,7 @@ intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connect intel_attach_force_audio_property(connector); intel_attach_broadcast_rgb_property(connector); + intel_dp->color_range_auto = true; if (is_edp(intel_dp)) { drm_mode_create_scaling_mode_property(connector->dev); @@ -2755,7 +2825,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, intel_connector_attach_encoder(intel_connector, intel_encoder); drm_sysfs_connector_add(connector); - if (IS_HASWELL(dev)) + if (HAS_DDI(dev)) intel_connector->get_hw_state = intel_ddi_connector_get_hw_state; else intel_connector->get_hw_state = intel_connector_get_hw_state; @@ -2767,15 +2837,15 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, name = "DPDDC-A"; break; case PORT_B: - dev_priv->hotplug_supported_mask |= DPB_HOTPLUG_INT_STATUS; + dev_priv->hotplug_supported_mask |= PORTB_HOTPLUG_INT_STATUS; name = "DPDDC-B"; break; case PORT_C: - dev_priv->hotplug_supported_mask |= DPC_HOTPLUG_INT_STATUS; + dev_priv->hotplug_supported_mask |= PORTC_HOTPLUG_INT_STATUS; name = "DPDDC-C"; break; case PORT_D: - dev_priv->hotplug_supported_mask |= DPD_HOTPLUG_INT_STATUS; + dev_priv->hotplug_supported_mask |= PORTD_HOTPLUG_INT_STATUS; name = "DPDDC-D"; break; default: |