diff options
Diffstat (limited to 'drivers/gpu/drm/i915/i915_params.c')
| -rw-r--r-- | drivers/gpu/drm/i915/i915_params.c | 154 |
1 files changed, 154 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c new file mode 100644 index 000000000000..d1d7980f0e01 --- /dev/null +++ b/drivers/gpu/drm/i915/i915_params.c @@ -0,0 +1,154 @@ +/* + * Copyright © 2014 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + */ + +#include "i915_drv.h" + +struct i915_params i915 __read_mostly = { + .modeset = -1, + .panel_ignore_lid = 1, + .powersave = 1, + .semaphores = -1, + .lvds_downclock = 0, + .lvds_channel_mode = 0, + .panel_use_ssc = -1, + .vbt_sdvo_panel_type = -1, + .enable_rc6 = -1, + .enable_fbc = -1, + .enable_hangcheck = true, + .enable_ppgtt = -1, + .enable_psr = 0, + .preliminary_hw_support = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT), + .disable_power_well = 1, + .enable_ips = 1, + .fastboot = 0, + .prefault_disable = 0, + .reset = true, + .invert_brightness = 0, + .disable_display = 0, + .enable_cmd_parser = 0, +}; + +module_param_named(modeset, i915.modeset, int, 0400); +MODULE_PARM_DESC(modeset, + "Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, " + "1=on, -1=force vga console preference [default])"); + +module_param_named(panel_ignore_lid, i915.panel_ignore_lid, int, 0600); +MODULE_PARM_DESC(panel_ignore_lid, + "Override lid status (0=autodetect, 1=autodetect disabled [default], " + "-1=force lid closed, -2=force lid open)"); + +module_param_named(powersave, i915.powersave, int, 0600); +MODULE_PARM_DESC(powersave, + "Enable powersavings, fbc, downclocking, etc. (default: true)"); + +module_param_named(semaphores, i915.semaphores, int, 0400); +MODULE_PARM_DESC(semaphores, + "Use semaphores for inter-ring sync " + "(default: -1 (use per-chip defaults))"); + +module_param_named(enable_rc6, i915.enable_rc6, int, 0400); +MODULE_PARM_DESC(enable_rc6, + "Enable power-saving render C-state 6. " + "Different stages can be selected via bitmask values " + "(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). " + "For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. " + "default: -1 (use per-chip default)"); + +module_param_named(enable_fbc, i915.enable_fbc, int, 0600); +MODULE_PARM_DESC(enable_fbc, + "Enable frame buffer compression for power savings " + "(default: -1 (use per-chip default))"); + +module_param_named(lvds_downclock, i915.lvds_downclock, int, 0400); +MODULE_PARM_DESC(lvds_downclock, + "Use panel (LVDS/eDP) downclocking for power savings " + "(default: false)"); + +module_param_named(lvds_channel_mode, i915.lvds_channel_mode, int, 0600); +MODULE_PARM_DESC(lvds_channel_mode, + "Specify LVDS channel mode " + "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)"); + +module_param_named(lvds_use_ssc, i915.panel_use_ssc, int, 0600); +MODULE_PARM_DESC(lvds_use_ssc, + "Use Spread Spectrum Clock with panels [LVDS/eDP] " + "(default: auto from VBT)"); + +module_param_named(vbt_sdvo_panel_type, i915.vbt_sdvo_panel_type, int, 0600); +MODULE_PARM_DESC(vbt_sdvo_panel_type, + "Override/Ignore selection of SDVO panel mode in the VBT " + "(-2=ignore, -1=auto [default], index in VBT BIOS table)"); + +module_param_named(reset, i915.reset, bool, 0600); +MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)"); + +module_param_named(enable_hangcheck, i915.enable_hangcheck, bool, 0644); +MODULE_PARM_DESC(enable_hangcheck, + "Periodically check GPU activity for detecting hangs. " + "WARNING: Disabling this can cause system wide hangs. " + "(default: true)"); + +module_param_named(enable_ppgtt, i915.enable_ppgtt, int, 0400); +MODULE_PARM_DESC(enable_ppgtt, + "Override PPGTT usage. " + "(-1=auto [default], 0=disabled, 1=aliasing, 2=full)"); + +module_param_named(enable_psr, i915.enable_psr, int, 0600); +MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)"); + +module_param_named(preliminary_hw_support, i915.preliminary_hw_support, int, 0600); +MODULE_PARM_DESC(preliminary_hw_support, + "Enable preliminary hardware support."); + +module_param_named(disable_power_well, i915.disable_power_well, int, 0600); +MODULE_PARM_DESC(disable_power_well, + "Disable the power well when possible (default: true)"); + +module_param_named(enable_ips, i915.enable_ips, int, 0600); +MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)"); + +module_param_named(fastboot, i915.fastboot, bool, 0600); +MODULE_PARM_DESC(fastboot, + "Try to skip unnecessary mode sets at boot time (default: false)"); + +module_param_named(prefault_disable, i915.prefault_disable, bool, 0600); +MODULE_PARM_DESC(prefault_disable, + "Disable page prefaulting for pread/pwrite/reloc (default:false). " + "For developers only."); + +module_param_named(invert_brightness, i915.invert_brightness, int, 0600); +MODULE_PARM_DESC(invert_brightness, + "Invert backlight brightness " + "(-1 force normal, 0 machine defaults, 1 force inversion), please " + "report PCI device ID, subsystem vendor and subsystem device ID " + "to dri-devel@lists.freedesktop.org, if your machine needs it. " + "It will then be included in an upcoming module version."); + +module_param_named(disable_display, i915.disable_display, bool, 0600); +MODULE_PARM_DESC(disable_display, "Disable display (default: false)"); + +module_param_named(enable_cmd_parser, i915.enable_cmd_parser, int, 0600); +MODULE_PARM_DESC(enable_cmd_parser, + "Enable command parsing (1=enabled, 0=disabled [default])"); |