1 files changed, 351 insertions, 0 deletions
diff --git a/drivers/gpu/drm/gma500/cdv_device.c b/drivers/gpu/drm/gma500/cdv_device.c
new file mode 100644
index 000000000000..4a5b099c3bc5
--- /dev/null
+++ b/drivers/gpu/drm/gma500/cdv_device.c
@@ -0,0 +1,351 @@
+/**************************************************************************
+ * Copyright (c) 2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+#include <linux/backlight.h>
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include "gma_drm.h"
+#include "psb_drv.h"
+#include "psb_reg.h"
+#include "psb_intel_reg.h"
+#include "intel_bios.h"
+#include "cdv_device.h"
+
+#define VGA_SR_INDEX		0x3c4
+#define VGA_SR_DATA		0x3c5
+
+static void cdv_disable_vga(struct drm_device *dev)
+{
+	u8 sr1;
+	u32 vga_reg;
+
+	vga_reg = VGACNTRL;
+
+	outb(1, VGA_SR_INDEX);
+	sr1 = inb(VGA_SR_DATA);
+	outb(sr1 | 1<<5, VGA_SR_DATA);
+	udelay(300);
+
+	REG_WRITE(vga_reg, VGA_DISP_DISABLE);
+	REG_READ(vga_reg);
+}
+
+static int cdv_output_init(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	cdv_disable_vga(dev);
+
+	cdv_intel_crt_init(dev, &dev_priv->mode_dev);
+	cdv_intel_lvds_init(dev, &dev_priv->mode_dev);
+
+	/* These bits indicate HDMI not SDVO on CDV, but we don't yet support
+	   the HDMI interface */
+	if (REG_READ(SDVOB) & SDVO_DETECTED)
+		cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOB);
+	if (REG_READ(SDVOC) & SDVO_DETECTED)
+		cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOC);
+	return 0;
+}
+
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+
+/*
+ *	Poulsbo Backlight Interfaces
+ */
+
+#define BLC_PWM_PRECISION_FACTOR 100	/* 10000000 */
+#define BLC_PWM_FREQ_CALC_CONSTANT 32
+#define MHz 1000000
+
+#define PSB_BLC_PWM_PRECISION_FACTOR    10
+#define PSB_BLC_MAX_PWM_REG_FREQ        0xFFFE
+#define PSB_BLC_MIN_PWM_REG_FREQ        0x2
+
+#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
+#define PSB_BACKLIGHT_PWM_CTL_SHIFT	(16)
+
+static int cdv_brightness;
+static struct backlight_device *cdv_backlight_device;
+
+static int cdv_get_brightness(struct backlight_device *bd)
+{
+	/* return locally cached var instead of HW read (due to DPST etc.) */
+	/* FIXME: ideally return actual value in case firmware fiddled with
+	   it */
+	return cdv_brightness;
+}
+
+
+static int cdv_backlight_setup(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	unsigned long core_clock;
+	/* u32 bl_max_freq; */
+	/* unsigned long value; */
+	u16 bl_max_freq;
+	uint32_t value;
+	uint32_t blc_pwm_precision_factor;
+
+	/* get bl_max_freq and pol from dev_priv*/
+	if (!dev_priv->lvds_bl) {
+		dev_err(dev->dev, "Has no valid LVDS backlight info\n");
+		return -ENOENT;
+	}
+	bl_max_freq = dev_priv->lvds_bl->freq;
+	blc_pwm_precision_factor = PSB_BLC_PWM_PRECISION_FACTOR;
+
+	core_clock = dev_priv->core_freq;
+
+	value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
+	value *= blc_pwm_precision_factor;
+	value /= bl_max_freq;
+	value /= blc_pwm_precision_factor;
+
+	if (value > (unsigned long long)PSB_BLC_MAX_PWM_REG_FREQ ||
+		 value < (unsigned long long)PSB_BLC_MIN_PWM_REG_FREQ)
+				return -ERANGE;
+	else {
+		/* FIXME */
+	}
+	return 0;
+}
+
+static int cdv_set_brightness(struct backlight_device *bd)
+{
+	int level = bd->props.brightness;
+
+	/* Percentage 1-100% being valid */
+	if (level < 1)
+		level = 1;
+
+	/*cdv_intel_lvds_set_brightness(dev, level); FIXME */
+	cdv_brightness = level;
+	return 0;
+}
+
+static const struct backlight_ops cdv_ops = {
+	.get_brightness = cdv_get_brightness,
+	.update_status  = cdv_set_brightness,
+};
+
+static int cdv_backlight_init(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	int ret;
+	struct backlight_properties props;
+
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 100;
+	props.type = BACKLIGHT_PLATFORM;
+
+	cdv_backlight_device = backlight_device_register("psb-bl",
+					NULL, (void *)dev, &cdv_ops, &props);
+	if (IS_ERR(cdv_backlight_device))
+		return PTR_ERR(cdv_backlight_device);
+
+	ret = cdv_backlight_setup(dev);
+	if (ret < 0) {
+		backlight_device_unregister(cdv_backlight_device);
+		cdv_backlight_device = NULL;
+		return ret;
+	}
+	cdv_backlight_device->props.brightness = 100;
+	cdv_backlight_device->props.max_brightness = 100;
+	backlight_update_status(cdv_backlight_device);
+	dev_priv->backlight_device = cdv_backlight_device;
+	return 0;
+}
+
+#endif
+
+/*
+ *	Provide the Cedarview specific chip logic and low level methods
+ *	for power management
+ *
+ *	FIXME: we need to implement the apm/ospm base management bits
+ *	for this and the MID devices.
+ */
+
+static inline u32 CDV_MSG_READ32(uint port, uint offset)
+{
+	int mcr = (0x10<<24) | (port << 16) | (offset << 8);
+	uint32_t ret_val = 0;
+	struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
+	pci_write_config_dword(pci_root, 0xD0, mcr);
+	pci_read_config_dword(pci_root, 0xD4, &ret_val);
+	pci_dev_put(pci_root);
+	return ret_val;
+}
+
+static inline void CDV_MSG_WRITE32(uint port, uint offset, u32 value)
+{
+	int mcr = (0x11<<24) | (port << 16) | (offset << 8) | 0xF0;
+	struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
+	pci_write_config_dword(pci_root, 0xD4, value);
+	pci_write_config_dword(pci_root, 0xD0, mcr);
+	pci_dev_put(pci_root);
+}
+
+#define PSB_APM_CMD			0x0
+#define PSB_APM_STS			0x04
+#define PSB_PM_SSC			0x20
+#define PSB_PM_SSS			0x30
+#define PSB_PWRGT_GFX_MASK		0x3
+#define CDV_PWRGT_DISPLAY_CNTR		0x000fc00c
+#define CDV_PWRGT_DISPLAY_STS		0x000fc00c
+
+static void cdv_init_pm(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 pwr_cnt;
+	int i;
+
+	dev_priv->apm_base = CDV_MSG_READ32(PSB_PUNIT_PORT,
+							PSB_APMBA) & 0xFFFF;
+	dev_priv->ospm_base = CDV_MSG_READ32(PSB_PUNIT_PORT,
+							PSB_OSPMBA) & 0xFFFF;
+
+	/* Force power on for now */
+	pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD);
+	pwr_cnt &= ~PSB_PWRGT_GFX_MASK;
+
+	outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD);
+	for (i = 0; i < 5; i++) {
+		u32 pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS);
+		if ((pwr_sts & PSB_PWRGT_GFX_MASK) == 0)
+			break;
+		udelay(10);
+	}
+	pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC);
+	pwr_cnt &= ~CDV_PWRGT_DISPLAY_CNTR;
+	outl(pwr_cnt, dev_priv->ospm_base + PSB_PM_SSC);
+	for (i = 0; i < 5; i++) {
+		u32 pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
+		if ((pwr_sts & CDV_PWRGT_DISPLAY_STS) == 0)
+			break;
+		udelay(10);
+	}
+}
+
+/**
+ *	cdv_save_display_registers	-	save registers lost on suspend
+ *	@dev: our DRM device
+ *
+ *	Save the state we need in order to be able to restore the interface
+ *	upon resume from suspend
+ *
+ *	FIXME: review
+ */
+static int cdv_save_display_registers(struct drm_device *dev)
+{
+	return 0;
+}
+
+/**
+ *	cdv_restore_display_registers	-	restore lost register state
+ *	@dev: our DRM device
+ *
+ *	Restore register state that was lost during suspend and resume.
+ *
+ *	FIXME: review
+ */
+static int cdv_restore_display_registers(struct drm_device *dev)
+{
+	return 0;
+}
+
+static int cdv_power_down(struct drm_device *dev)
+{
+	return 0;
+}
+
+static int cdv_power_up(struct drm_device *dev)
+{
+	return 0;
+}
+
+/* FIXME ? - shared with Poulsbo */
+static void cdv_get_core_freq(struct drm_device *dev)
+{
+	uint32_t clock;
+	struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	pci_write_config_dword(pci_root, 0xD0, 0xD0050300);
+	pci_read_config_dword(pci_root, 0xD4, &clock);
+	pci_dev_put(pci_root);
+
+	switch (clock & 0x07) {
+	case 0:
+		dev_priv->core_freq = 100;
+		break;
+	case 1:
+		dev_priv->core_freq = 133;
+		break;
+	case 2:
+		dev_priv->core_freq = 150;
+		break;
+	case 3:
+		dev_priv->core_freq = 178;
+		break;
+	case 4:
+		dev_priv->core_freq = 200;
+		break;
+	case 5:
+	case 6:
+	case 7:
+		dev_priv->core_freq = 266;
+	default:
+		dev_priv->core_freq = 0;
+	}
+}
+
+static int cdv_chip_setup(struct drm_device *dev)
+{
+	cdv_get_core_freq(dev);
+	gma_intel_opregion_init(dev);
+	psb_intel_init_bios(dev);
+	return 0;
+}
+
+/* CDV is much like Poulsbo but has MID like SGX offsets and PM */
+
+const struct psb_ops cdv_chip_ops = {
+	.name = "GMA3600/3650",
+	.accel_2d = 0,
+	.pipes = 2,
+	.crtcs = 2,
+	.sgx_offset = MRST_SGX_OFFSET,
+	.chip_setup = cdv_chip_setup,
+
+	.crtc_helper = &cdv_intel_helper_funcs,
+	.crtc_funcs = &cdv_intel_crtc_funcs,
+
+	.output_init = cdv_output_init,
+
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+	.backlight_init = cdv_backlight_init,
+#endif
+
+	.init_pm = cdv_init_pm,
+	.save_regs = cdv_save_display_registers,
+	.restore_regs = cdv_restore_display_registers,
+	.power_down = cdv_power_down,
+	.power_up = cdv_power_up,
+};