diff options
Diffstat (limited to 'drivers/gpu/drm/drm_dp_helper.c')
| -rw-r--r-- | drivers/gpu/drm/drm_dp_helper.c | 83 |
1 files changed, 1 insertions, 82 deletions
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index 3c5b04abb66f..eedbb48815b7 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -1236,7 +1236,7 @@ bool drm_dp_read_sink_count_cap(struct drm_connector *connector, return connector->connector_type != DRM_MODE_CONNECTOR_eDP && dpcd[DP_DPCD_REV] >= DP_DPCD_REV_11 && dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT && - !drm_dp_has_quirk(desc, 0, DP_DPCD_QUIRK_NO_SINK_COUNT); + !drm_dp_has_quirk(desc, DP_DPCD_QUIRK_NO_SINK_COUNT); } EXPORT_SYMBOL(drm_dp_read_sink_count_cap); @@ -1957,87 +1957,6 @@ drm_dp_get_quirks(const struct drm_dp_dpcd_ident *ident, bool is_branch) #undef DEVICE_ID_ANY #undef DEVICE_ID -struct edid_quirk { - u8 mfg_id[2]; - u8 prod_id[2]; - u32 quirks; -}; - -#define MFG(first, second) { (first), (second) } -#define PROD_ID(first, second) { (first), (second) } - -/* - * Some devices have unreliable OUIDs where they don't set the device ID - * correctly, and as a result we need to use the EDID for finding additional - * DP quirks in such cases. - */ -static const struct edid_quirk edid_quirk_list[] = { - /* Optional 4K AMOLED panel in the ThinkPad X1 Extreme 2nd Generation - * only supports DPCD backlight controls - */ - { MFG(0x4c, 0x83), PROD_ID(0x41, 0x41), BIT(DP_QUIRK_FORCE_DPCD_BACKLIGHT) }, - /* - * Some Dell CML 2020 systems have panels support both AUX and PWM - * backlight control, and some only support AUX backlight control. All - * said panels start up in AUX mode by default, and we don't have any - * support for disabling HDR mode on these panels which would be - * required to switch to PWM backlight control mode (plus, I'm not - * even sure we want PWM backlight controls over DPCD backlight - * controls anyway...). Until we have a better way of detecting these, - * force DPCD backlight mode on all of them. - */ - { MFG(0x06, 0xaf), PROD_ID(0x9b, 0x32), BIT(DP_QUIRK_FORCE_DPCD_BACKLIGHT) }, - { MFG(0x06, 0xaf), PROD_ID(0xeb, 0x41), BIT(DP_QUIRK_FORCE_DPCD_BACKLIGHT) }, - { MFG(0x4d, 0x10), PROD_ID(0xc7, 0x14), BIT(DP_QUIRK_FORCE_DPCD_BACKLIGHT) }, - { MFG(0x4d, 0x10), PROD_ID(0xe6, 0x14), BIT(DP_QUIRK_FORCE_DPCD_BACKLIGHT) }, - { MFG(0x4c, 0x83), PROD_ID(0x47, 0x41), BIT(DP_QUIRK_FORCE_DPCD_BACKLIGHT) }, - { MFG(0x09, 0xe5), PROD_ID(0xde, 0x08), BIT(DP_QUIRK_FORCE_DPCD_BACKLIGHT) }, -}; - -#undef MFG -#undef PROD_ID - -/** - * drm_dp_get_edid_quirks() - Check the EDID of a DP device to find additional - * DP-specific quirks - * @edid: The EDID to check - * - * While OUIDs are meant to be used to recognize a DisplayPort device, a lot - * of manufacturers don't seem to like following standards and neglect to fill - * the dev-ID in, making it impossible to only use OUIDs for determining - * quirks in some cases. This function can be used to check the EDID and look - * up any additional DP quirks. The bits returned by this function correspond - * to the quirk bits in &drm_dp_quirk. - * - * Returns: a bitmask of quirks, if any. The driver can check this using - * drm_dp_has_quirk(). - */ -u32 drm_dp_get_edid_quirks(const struct edid *edid) -{ - const struct edid_quirk *quirk; - u32 quirks = 0; - int i; - - if (!edid) - return 0; - - for (i = 0; i < ARRAY_SIZE(edid_quirk_list); i++) { - quirk = &edid_quirk_list[i]; - if (memcmp(quirk->mfg_id, edid->mfg_id, - sizeof(edid->mfg_id)) == 0 && - memcmp(quirk->prod_id, edid->prod_code, - sizeof(edid->prod_code)) == 0) - quirks |= quirk->quirks; - } - - DRM_DEBUG_KMS("DP sink: EDID mfg %*phD prod-ID %*phD quirks: 0x%04x\n", - (int)sizeof(edid->mfg_id), edid->mfg_id, - (int)sizeof(edid->prod_code), edid->prod_code, quirks); - - return quirks; -} -EXPORT_SYMBOL(drm_dp_get_edid_quirks); - /** * drm_dp_read_desc - read sink/branch descriptor from DPCD * @aux: DisplayPort AUX channel |