diff options
Diffstat (limited to 'drivers/gpio')
| -rw-r--r-- | drivers/gpio/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/gpio/Makefile | 1 | ||||
| -rw-r--r-- | drivers/gpio/gpio-ts5500.c | 466 |
3 files changed, 475 insertions, 0 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 46e96f3fc3f8..39d9323abbda 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -211,6 +211,14 @@ config GPIO_STA2X11 Say yes here to support the STA2x11/ConneXt GPIO device. The GPIO module has 128 GPIO pins with alternate functions. +config GPIO_TS5500 + tristate "TS-5500 DIO blocks and compatibles" + help + This driver supports Digital I/O exposed by pin blocks found on some + Technologic Systems platforms. It includes, but is not limited to, 3 + blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600 + LCD port. + config GPIO_VT8500 bool "VIA/Wondermedia SoC GPIO Support" depends on ARCH_VT8500 diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index a268d99f4e43..a41c2503bd40 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -71,6 +71,7 @@ obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += gpio-tnetv107x.o obj-$(CONFIG_GPIO_TPS6586X) += gpio-tps6586x.o obj-$(CONFIG_GPIO_TPS65910) += gpio-tps65910.o obj-$(CONFIG_GPIO_TPS65912) += gpio-tps65912.o +obj-$(CONFIG_GPIO_TS5500) += gpio-ts5500.o obj-$(CONFIG_GPIO_TWL4030) += gpio-twl4030.o obj-$(CONFIG_GPIO_TWL6040) += gpio-twl6040.o obj-$(CONFIG_GPIO_UCB1400) += gpio-ucb1400.o diff --git a/drivers/gpio/gpio-ts5500.c b/drivers/gpio/gpio-ts5500.c new file mode 100644 index 000000000000..0634ceea3c24 --- /dev/null +++ b/drivers/gpio/gpio-ts5500.c @@ -0,0 +1,466 @@ +/* + * Digital I/O driver for Technologic Systems TS-5500 + * + * Copyright (c) 2012 Savoir-faire Linux Inc. + * Vivien Didelot <vivien.didelot@savoirfairelinux.com> + * + * Technologic Systems platforms have pin blocks, exposing several Digital + * Input/Output lines (DIO). This driver aims to support single pin blocks. + * In that sense, the support is not limited to the TS-5500 blocks. + * Actually, the following platforms have DIO support: + * + * TS-5500: + * Documentation: http://wiki.embeddedarm.com/wiki/TS-5500 + * Blocks: DIO1, DIO2 and LCD port. + * + * TS-5600: + * Documentation: http://wiki.embeddedarm.com/wiki/TS-5600 + * Blocks: LCD port (identical to TS-5500 LCD). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/bitops.h> +#include <linux/gpio.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_data/gpio-ts5500.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +/* List of supported Technologic Systems platforms DIO blocks */ +enum ts5500_blocks { TS5500_DIO1, TS5500_DIO2, TS5500_LCD, TS5600_LCD }; + +struct ts5500_priv { + const struct ts5500_dio *pinout; + struct gpio_chip gpio_chip; + spinlock_t lock; + bool strap; + u8 hwirq; +}; + +/* + * Hex 7D is used to control several blocks (e.g. DIO2 and LCD port). + * This flag ensures that the region has been requested by this driver. + */ +static bool hex7d_reserved; + +/* + * This structure is used to describe capabilities of DIO lines, + * such as available directions and connected interrupt (if any). + */ +struct ts5500_dio { + const u8 value_addr; + const u8 value_mask; + const u8 control_addr; + const u8 control_mask; + const bool no_input; + const bool no_output; + const u8 irq; +}; + +#define TS5500_DIO_IN_OUT(vaddr, vbit, caddr, cbit) \ + { \ + .value_addr = vaddr, \ + .value_mask = BIT(vbit), \ + .control_addr = caddr, \ + .control_mask = BIT(cbit), \ + } + +#define TS5500_DIO_IN(addr, bit) \ + { \ + .value_addr = addr, \ + .value_mask = BIT(bit), \ + .no_output = true, \ + } + +#define TS5500_DIO_IN_IRQ(addr, bit, _irq) \ + { \ + .value_addr = addr, \ + .value_mask = BIT(bit), \ + .no_output = true, \ + .irq = _irq, \ + } + +#define TS5500_DIO_OUT(addr, bit) \ + { \ + .value_addr = addr, \ + .value_mask = BIT(bit), \ + .no_input = true, \ + } + +/* + * Input/Output DIO lines are programmed in groups of 4. Their values are + * available through 4 consecutive bits in a value port, whereas the direction + * of these 4 lines is driven by only 1 bit in a control port. + */ +#define TS5500_DIO_GROUP(vaddr, vbitfrom, caddr, cbit) \ + TS5500_DIO_IN_OUT(vaddr, vbitfrom + 0, caddr, cbit), \ + TS5500_DIO_IN_OUT(vaddr, vbitfrom + 1, caddr, cbit), \ + TS5500_DIO_IN_OUT(vaddr, vbitfrom + 2, caddr, cbit), \ + TS5500_DIO_IN_OUT(vaddr, vbitfrom + 3, caddr, cbit) + +/* + * TS-5500 DIO1 block + * + * value control dir hw + * addr bit addr bit in out irq name pin offset + * + * 0x7b 0 0x7a 0 x x DIO1_0 1 0 + * 0x7b 1 0x7a 0 x x DIO1_1 3 1 + * 0x7b 2 0x7a 0 x x DIO1_2 5 2 + * 0x7b 3 0x7a 0 x x DIO1_3 7 3 + * 0x7b 4 0x7a 1 x x DIO1_4 9 4 + * 0x7b 5 0x7a 1 x x DIO1_5 11 5 + * 0x7b 6 0x7a 1 x x DIO1_6 13 6 + * 0x7b 7 0x7a 1 x x DIO1_7 15 7 + * 0x7c 0 0x7a 5 x x DIO1_8 4 8 + * 0x7c 1 0x7a 5 x x DIO1_9 6 9 + * 0x7c 2 0x7a 5 x x DIO1_10 8 10 + * 0x7c 3 0x7a 5 x x DIO1_11 10 11 + * 0x7c 4 x DIO1_12 12 12 + * 0x7c 5 x 7 DIO1_13 14 13 + */ +static const struct ts5500_dio ts5500_dio1[] = { + TS5500_DIO_GROUP(0x7b, 0, 0x7a, 0), + TS5500_DIO_GROUP(0x7b, 4, 0x7a, 1), + TS5500_DIO_GROUP(0x7c, 0, 0x7a, 5), + TS5500_DIO_IN(0x7c, 4), + TS5500_DIO_IN_IRQ(0x7c, 5, 7), +}; + +/* + * TS-5500 DIO2 block + * + * value control dir hw + * addr bit addr bit in out irq name pin offset + * + * 0x7e 0 0x7d 0 x x DIO2_0 1 0 + * 0x7e 1 0x7d 0 x x DIO2_1 3 1 + * 0x7e 2 0x7d 0 x x DIO2_2 5 2 + * 0x7e 3 0x7d 0 x x DIO2_3 7 3 + * 0x7e 4 0x7d 1 x x DIO2_4 9 4 + * 0x7e 5 0x7d 1 x x DIO2_5 11 5 + * 0x7e 6 0x7d 1 x x DIO2_6 13 6 + * 0x7e 7 0x7d 1 x x DIO2_7 15 7 + * 0x7f 0 0x7d 5 x x DIO2_8 4 8 + * 0x7f 1 0x7d 5 x x DIO2_9 6 9 + * 0x7f 2 0x7d 5 x x DIO2_10 8 10 + * 0x7f 3 0x7d 5 x x DIO2_11 10 11 + * 0x7f 4 x 6 DIO2_13 14 12 + */ +static const struct ts5500_dio ts5500_dio2[] = { + TS5500_DIO_GROUP(0x7e, 0, 0x7d, 0), + TS5500_DIO_GROUP(0x7e, 4, 0x7d, 1), + TS5500_DIO_GROUP(0x7f, 0, 0x7d, 5), + TS5500_DIO_IN_IRQ(0x7f, 4, 6), +}; + +/* + * TS-5500 LCD port used as DIO block + * TS-5600 LCD port is identical + * + * value control dir hw + * addr bit addr bit in out irq name pin offset + * + * 0x72 0 0x7d 2 x x LCD_0 8 0 + * 0x72 1 0x7d 2 x x LCD_1 7 1 + * 0x72 2 0x7d 2 x x LCD_2 10 2 + * 0x72 3 0x7d 2 x x LCD_3 9 3 + * 0x72 4 0x7d 3 x x LCD_4 12 4 + * 0x72 5 0x7d 3 x x LCD_5 11 5 + * 0x72 6 0x7d 3 x x LCD_6 14 6 + * 0x72 7 0x7d 3 x x LCD_7 13 7 + * 0x73 0 x LCD_EN 5 8 + * 0x73 6 x LCD_WR 6 9 + * 0x73 7 x 1 LCD_RS 3 10 + */ +static const struct ts5500_dio ts5500_lcd[] = { + TS5500_DIO_GROUP(0x72, 0, 0x7d, 2), + TS5500_DIO_GROUP(0x72, 4, 0x7d, 3), + TS5500_DIO_OUT(0x73, 0), + TS5500_DIO_IN(0x73, 6), + TS5500_DIO_IN_IRQ(0x73, 7, 1), +}; + +static inline struct ts5500_priv *ts5500_gc_to_priv(struct gpio_chip *chip) +{ + return container_of(chip, struct ts5500_priv, gpio_chip); +} + +static inline void ts5500_set_mask(u8 mask, u8 addr) +{ + u8 val = inb(addr); + val |= mask; + outb(val, addr); +} + +static inline void ts5500_clear_mask(u8 mask, u8 addr) +{ + u8 val = inb(addr); + val &= ~mask; + outb(val, addr); +} + +static int ts5500_gpio_input(struct gpio_chip *chip, unsigned offset) +{ + struct ts5500_priv *priv = ts5500_gc_to_priv(chip); + const struct ts5500_dio line = priv->pinout[offset]; + unsigned long flags; + + if (line.no_input) + return -ENXIO; + + if (line.no_output) + return 0; + + spin_lock_irqsave(&priv->lock, flags); + ts5500_clear_mask(line.control_mask, line.control_addr); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static int ts5500_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct ts5500_priv *priv = ts5500_gc_to_priv(chip); + const struct ts5500_dio line = priv->pinout[offset]; + + return !!(inb(line.value_addr) & line.value_mask); +} + +static int ts5500_gpio_output(struct gpio_chip *chip, unsigned offset, int val) +{ + struct ts5500_priv *priv = ts5500_gc_to_priv(chip); + const struct ts5500_dio line = priv->pinout[offset]; + unsigned long flags; + + if (line.no_output) + return -ENXIO; + + spin_lock_irqsave(&priv->lock, flags); + if (!line.no_input) + ts5500_set_mask(line.control_mask, line.control_addr); + + if (val) + ts5500_set_mask(line.value_mask, line.value_addr); + else + ts5500_clear_mask(line.value_mask, line.value_addr); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static void ts5500_gpio_set(struct gpio_chip *chip, unsigned offset, int val) +{ + struct ts5500_priv *priv = ts5500_gc_to_priv(chip); + const struct ts5500_dio line = priv->pinout[offset]; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + if (val) + ts5500_set_mask(line.value_mask, line.value_addr); + else + ts5500_clear_mask(line.value_mask, line.value_addr); + spin_unlock_irqrestore(&priv->lock, flags); +} + +static int ts5500_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct ts5500_priv *priv = ts5500_gc_to_priv(chip); + const struct ts5500_dio *block = priv->pinout; + const struct ts5500_dio line = block[offset]; + + /* Only one pin is connected to an interrupt */ + if (line.irq) + return line.irq; + + /* As this pin is input-only, we may strap it to another in/out pin */ + if (priv->strap) + return priv->hwirq; + + return -ENXIO; +} + +static int ts5500_enable_irq(struct ts5500_priv *priv) +{ + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + if (priv->hwirq == 7) + ts5500_set_mask(BIT(7), 0x7a); /* DIO1_13 on IRQ7 */ + else if (priv->hwirq == 6) + ts5500_set_mask(BIT(7), 0x7d); /* DIO2_13 on IRQ6 */ + else if (priv->hwirq == 1) + ts5500_set_mask(BIT(6), 0x7d); /* LCD_RS on IRQ1 */ + else + ret = -EINVAL; + spin_unlock_irqrestore(&priv->lock, flags); + + return ret; +} + +static void ts5500_disable_irq(struct ts5500_priv *priv) +{ + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + if (priv->hwirq == 7) + ts5500_clear_mask(BIT(7), 0x7a); /* DIO1_13 on IRQ7 */ + else if (priv->hwirq == 6) + ts5500_clear_mask(BIT(7), 0x7d); /* DIO2_13 on IRQ6 */ + else if (priv->hwirq == 1) + ts5500_clear_mask(BIT(6), 0x7d); /* LCD_RS on IRQ1 */ + else + dev_err(priv->gpio_chip.dev, "invalid hwirq %d\n", priv->hwirq); + spin_unlock_irqrestore(&priv->lock, flags); +} + +static int __devinit ts5500_dio_probe(struct platform_device *pdev) +{ + enum ts5500_blocks block = platform_get_device_id(pdev)->driver_data; + struct ts5500_dio_platform_data *pdata = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + const char *name = dev_name(dev); + struct ts5500_priv *priv; + struct resource *res; + unsigned long flags; + int ret; + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) { + dev_err(dev, "missing IRQ resource\n"); + return -EINVAL; + } + + priv = devm_kzalloc(dev, sizeof(struct ts5500_priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + platform_set_drvdata(pdev, priv); + priv->hwirq = res->start; + spin_lock_init(&priv->lock); + + priv->gpio_chip.owner = THIS_MODULE; + priv->gpio_chip.label = name; + priv->gpio_chip.dev = dev; + priv->gpio_chip.direction_input = ts5500_gpio_input; + priv->gpio_chip.direction_output = ts5500_gpio_output; + priv->gpio_chip.get = ts5500_gpio_get; + priv->gpio_chip.set = ts5500_gpio_set; + priv->gpio_chip.to_irq = ts5500_gpio_to_irq; + priv->gpio_chip.base = -1; + if (pdata) { + priv->gpio_chip.base = pdata->base; + priv->strap = pdata->strap; + } + + switch (block) { + case TS5500_DIO1: + priv->pinout = ts5500_dio1; + priv->gpio_chip.ngpio = ARRAY_SIZE(ts5500_dio1); + + if (!devm_request_region(dev, 0x7a, 3, name)) { + dev_err(dev, "failed to request %s ports\n", name); + return -EBUSY; + } + break; + case TS5500_DIO2: + priv->pinout = ts5500_dio2; + priv->gpio_chip.ngpio = ARRAY_SIZE(ts5500_dio2); + + if (!devm_request_region(dev, 0x7e, 2, name)) { + dev_err(dev, "failed to request %s ports\n", name); + return -EBUSY; + } + + if (hex7d_reserved) + break; + + if (!devm_request_region(dev, 0x7d, 1, name)) { + dev_err(dev, "failed to request %s 7D\n", name); + return -EBUSY; + } + + hex7d_reserved = true; + break; + case TS5500_LCD: + case TS5600_LCD: + priv->pinout = ts5500_lcd; + priv->gpio_chip.ngpio = ARRAY_SIZE(ts5500_lcd); + + if (!devm_request_region(dev, 0x72, 2, name)) { + dev_err(dev, "failed to request %s ports\n", name); + return -EBUSY; + } + + if (!hex7d_reserved) { + if (!devm_request_region(dev, 0x7d, 1, name)) { + dev_err(dev, "failed to request %s 7D\n", name); + return -EBUSY; + } + + hex7d_reserved = true; + } + + /* Ensure usage of LCD port as DIO */ + spin_lock_irqsave(&priv->lock, flags); + ts5500_clear_mask(BIT(4), 0x7d); + spin_unlock_irqrestore(&priv->lock, flags); + break; + } + + ret = gpiochip_add(&priv->gpio_chip); + if (ret) { + dev_err(dev, "failed to register the gpio chip\n"); + return ret; + } + + ret = ts5500_enable_irq(priv); + if (ret) { + dev_err(dev, "invalid interrupt %d\n", priv->hwirq); + goto cleanup; + } + + return 0; +cleanup: + if (gpiochip_remove(&priv->gpio_chip)) + dev_err(dev, "failed to remove gpio chip\n"); + return ret; +} + +static int __devexit ts5500_dio_remove(struct platform_device *pdev) +{ + struct ts5500_priv *priv = platform_get_drvdata(pdev); + + ts5500_disable_irq(priv); + return gpiochip_remove(&priv->gpio_chip); +} + +static struct platform_device_id ts5500_dio_ids[] = { + { "ts5500-dio1", TS5500_DIO1 }, + { "ts5500-dio2", TS5500_DIO2 }, + { "ts5500-dio-lcd", TS5500_LCD }, + { "ts5600-dio-lcd", TS5600_LCD }, + { } +}; +MODULE_DEVICE_TABLE(platform, ts5500_dio_ids); + +static struct platform_driver ts5500_dio_driver = { + .driver = { + .name = "ts5500-dio", + .owner = THIS_MODULE, + }, + .probe = ts5500_dio_probe, + .remove = __devexit_p(ts5500_dio_remove), + .id_table = ts5500_dio_ids, +}; + +module_platform_driver(ts5500_dio_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Savoir-faire Linux Inc. <kernel@savoirfairelinux.com>"); +MODULE_DESCRIPTION("Technologic Systems TS-5500 Digital I/O driver"); |