diff options
Diffstat (limited to 'drivers/fsi/fsi-master.h')
| -rw-r--r-- | drivers/fsi/fsi-master.h | 71 |
1 files changed, 71 insertions, 0 deletions
diff --git a/drivers/fsi/fsi-master.h b/drivers/fsi/fsi-master.h index c7174237e864..6e8d4d4d5149 100644 --- a/drivers/fsi/fsi-master.h +++ b/drivers/fsi/fsi-master.h @@ -12,6 +12,71 @@ #include <linux/device.h> #include <linux/mutex.h> +/* + * Master registers + * + * These are used by hardware masters, such as the one in the FSP2, AST2600 and + * the hub master in POWER processors. + */ + +/* Control Registers */ +#define FSI_MMODE 0x0 /* R/W: mode */ +#define FSI_MDLYR 0x4 /* R/W: delay */ +#define FSI_MCRSP 0x8 /* R/W: clock rate */ +#define FSI_MENP0 0x10 /* R/W: enable */ +#define FSI_MLEVP0 0x18 /* R: plug detect */ +#define FSI_MSENP0 0x18 /* S: Set enable */ +#define FSI_MCENP0 0x20 /* C: Clear enable */ +#define FSI_MAEB 0x70 /* R: Error address */ +#define FSI_MVER 0x74 /* R: master version/type */ +#define FSI_MSTAP0 0xd0 /* R: Port status */ +#define FSI_MRESP0 0xd0 /* W: Port reset */ +#define FSI_MESRB0 0x1d0 /* R: Master error status */ +#define FSI_MRESB0 0x1d0 /* W: Reset bridge */ +#define FSI_MSCSB0 0x1d4 /* R: Master sub command stack */ +#define FSI_MATRB0 0x1d8 /* R: Master address trace */ +#define FSI_MDTRB0 0x1dc /* R: Master data trace */ +#define FSI_MECTRL 0x2e0 /* W: Error control */ + +/* MMODE: Mode control */ +#define FSI_MMODE_EIP 0x80000000 /* Enable interrupt polling */ +#define FSI_MMODE_ECRC 0x40000000 /* Enable error recovery */ +#define FSI_MMODE_RELA 0x20000000 /* Enable relative address commands */ +#define FSI_MMODE_EPC 0x10000000 /* Enable parity checking */ +#define FSI_MMODE_P8_TO_LSB 0x00000010 /* Timeout value LSB */ + /* MSB=1, LSB=0 is 0.8 ms */ + /* MSB=0, LSB=1 is 0.9 ms */ +#define FSI_MMODE_CRS0SHFT 18 /* Clk rate selection 0 shift */ +#define FSI_MMODE_CRS0MASK 0x3ff /* Clk rate selection 0 mask */ +#define FSI_MMODE_CRS1SHFT 8 /* Clk rate selection 1 shift */ +#define FSI_MMODE_CRS1MASK 0x3ff /* Clk rate selection 1 mask */ + +/* MRESB: Reset brindge */ +#define FSI_MRESB_RST_GEN 0x80000000 /* General reset */ +#define FSI_MRESB_RST_ERR 0x40000000 /* Error Reset */ + +/* MRESP: Reset port */ +#define FSI_MRESP_RST_ALL_MASTER 0x20000000 /* Reset all FSI masters */ +#define FSI_MRESP_RST_ALL_LINK 0x10000000 /* Reset all FSI port contr. */ +#define FSI_MRESP_RST_MCR 0x08000000 /* Reset FSI master reg. */ +#define FSI_MRESP_RST_PYE 0x04000000 /* Reset FSI parity error */ +#define FSI_MRESP_RST_ALL 0xfc000000 /* Reset any error */ + +/* MECTRL: Error control */ +#define FSI_MECTRL_EOAE 0x8000 /* Enable machine check when */ + /* master 0 in error */ +#define FSI_MECTRL_P8_AUTO_TERM 0x4000 /* Auto terminate */ + +#define FSI_HUB_LINK_OFFSET 0x80000 +#define FSI_HUB_LINK_SIZE 0x80000 +#define FSI_HUB_MASTER_MAX_LINKS 8 + +/* + * Protocol definitions + * + * These are used by low level masters that bit-bang out the protocol + */ + /* Various protocol delays */ #define FSI_ECHO_DELAY_CLOCKS 16 /* Number clocks for echo delay */ #define FSI_SEND_DELAY_CLOCKS 16 /* Number clocks for send delay */ @@ -47,6 +112,12 @@ /* fsi-master definition and flags */ #define FSI_MASTER_FLAG_SWCLOCK 0x1 +/* + * Structures and function prototypes + * + * These are common to all masters + */ + struct fsi_master { struct device dev; int idx; |