diff options
Diffstat (limited to 'drivers/firewire')
| -rw-r--r-- | drivers/firewire/Kconfig | 24 | ||||
| -rw-r--r-- | drivers/firewire/Makefile | 1 | ||||
| -rw-r--r-- | drivers/firewire/core-card.c | 24 | ||||
| -rw-r--r-- | drivers/firewire/core-cdev.c | 1 | ||||
| -rw-r--r-- | drivers/firewire/core-device.c | 6 | ||||
| -rw-r--r-- | drivers/firewire/core-iso.c | 15 | ||||
| -rw-r--r-- | drivers/firewire/net.c | 1 | ||||
| -rw-r--r-- | drivers/firewire/nosy-user.h | 25 | ||||
| -rw-r--r-- | drivers/firewire/nosy.c | 721 | ||||
| -rw-r--r-- | drivers/firewire/nosy.h | 237 | ||||
| -rw-r--r-- | drivers/firewire/ohci.c | 28 | ||||
| -rw-r--r-- | drivers/firewire/sbp2.c | 2 |
12 files changed, 1061 insertions, 24 deletions
diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig index a9371b36a9b9..fcf3ea28340b 100644 --- a/drivers/firewire/Kconfig +++ b/drivers/firewire/Kconfig @@ -66,4 +66,28 @@ config FIREWIRE_NET source "drivers/ieee1394/Kconfig" +config FIREWIRE_NOSY + tristate "Nosy - a FireWire traffic sniffer for PCILynx cards" + depends on PCI + help + Nosy is an IEEE 1394 packet sniffer that is used for protocol + analysis and in development of IEEE 1394 drivers, applications, + or firmwares. + + This driver lets you use a Texas Instruments PCILynx 1394 to PCI + link layer controller TSB12LV21/A/B as a low-budget bus analyzer. + PCILynx is a nowadays very rare IEEE 1394 controller which is + not OHCI 1394 compliant. + + The following cards are known to be based on PCILynx or PCILynx-2: + IOI IOI-1394TT (PCI card), Unibrain Fireboard 400 PCI Lynx-2 + (PCI card), Newer Technology FireWire 2 Go (CardBus card), + Apple Power Mac G3 blue & white (onboard controller). + + To compile this driver as a module, say M here: The module will be + called nosy. Source code of a userspace interface to nosy, called + nosy-dump, can be found in tools/firewire/ of the kernel sources. + + If unsure, say N. + endmenu diff --git a/drivers/firewire/Makefile b/drivers/firewire/Makefile index a8f9bb6d9fdf..3c6a7fb20aa7 100644 --- a/drivers/firewire/Makefile +++ b/drivers/firewire/Makefile @@ -12,3 +12,4 @@ obj-$(CONFIG_FIREWIRE) += firewire-core.o obj-$(CONFIG_FIREWIRE_OHCI) += firewire-ohci.o obj-$(CONFIG_FIREWIRE_SBP2) += firewire-sbp2.o obj-$(CONFIG_FIREWIRE_NET) += firewire-net.o +obj-$(CONFIG_FIREWIRE_NOSY) += nosy.o diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c index 417b8a4b1af1..be0492398ef9 100644 --- a/drivers/firewire/core-card.c +++ b/drivers/firewire/core-card.c @@ -276,13 +276,14 @@ void fw_schedule_bm_work(struct fw_card *card, unsigned long delay) static void bm_work(struct work_struct *work) { struct fw_card *card = container_of(work, struct fw_card, bm_work.work); - struct fw_device *root_device; + struct fw_device *root_device, *irm_device; struct fw_node *root_node; int root_id, new_root_id, irm_id, bm_id, local_id; int gap_count, generation, grace, rcode; bool do_reset = false; bool root_device_is_running; bool root_device_is_cmc; + bool irm_is_1394_1995_only; spin_lock_irq(&card->lock); @@ -292,12 +293,18 @@ static void bm_work(struct work_struct *work) } generation = card->generation; + root_node = card->root_node; fw_node_get(root_node); root_device = root_node->data; root_device_is_running = root_device && atomic_read(&root_device->state) == FW_DEVICE_RUNNING; root_device_is_cmc = root_device && root_device->cmc; + + irm_device = card->irm_node->data; + irm_is_1394_1995_only = irm_device && irm_device->config_rom && + (irm_device->config_rom[2] & 0x000000f0) == 0; + root_id = root_node->node_id; irm_id = card->irm_node->node_id; local_id = card->local_node->node_id; @@ -321,8 +328,15 @@ static void bm_work(struct work_struct *work) if (!card->irm_node->link_on) { new_root_id = local_id; - fw_notify("IRM has link off, making local node (%02x) root.\n", - new_root_id); + fw_notify("%s, making local node (%02x) root.\n", + "IRM has link off", new_root_id); + goto pick_me; + } + + if (irm_is_1394_1995_only) { + new_root_id = local_id; + fw_notify("%s, making local node (%02x) root.\n", + "IRM is not 1394a compliant", new_root_id); goto pick_me; } @@ -376,8 +390,8 @@ static void bm_work(struct work_struct *work) * root, and thus, IRM. */ new_root_id = local_id; - fw_notify("BM lock failed, making local node (%02x) root.\n", - new_root_id); + fw_notify("%s, making local node (%02x) root.\n", + "BM lock failed", new_root_id); goto pick_me; } } else if (card->bm_generation != generation) { diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c index ba23646bb108..14bb7b7b5dd7 100644 --- a/drivers/firewire/core-cdev.c +++ b/drivers/firewire/core-cdev.c @@ -35,6 +35,7 @@ #include <linux/mutex.h> #include <linux/poll.h> #include <linux/sched.h> /* required for linux/wait.h */ +#include <linux/slab.h> #include <linux/spinlock.h> #include <linux/string.h> #include <linux/time.h> diff --git a/drivers/firewire/core-device.c b/drivers/firewire/core-device.c index e9c18f582c82..6113b896e790 100644 --- a/drivers/firewire/core-device.c +++ b/drivers/firewire/core-device.c @@ -33,7 +33,7 @@ #include <linux/module.h> #include <linux/mutex.h> #include <linux/rwsem.h> -#include <linux/semaphore.h> +#include <linux/slab.h> #include <linux/spinlock.h> #include <linux/string.h> #include <linux/workqueue.h> @@ -805,9 +805,9 @@ static int update_unit(struct device *dev, void *data) struct fw_driver *driver = (struct fw_driver *)dev->driver; if (is_fw_unit(dev) && driver != NULL && driver->update != NULL) { - down(&dev->sem); + device_lock(dev); driver->update(unit); - up(&dev->sem); + device_unlock(dev); } return 0; diff --git a/drivers/firewire/core-iso.c b/drivers/firewire/core-iso.c index 0c8e662a5daf..c003fa4e2db1 100644 --- a/drivers/firewire/core-iso.c +++ b/drivers/firewire/core-iso.c @@ -26,6 +26,7 @@ #include <linux/firewire-constants.h> #include <linux/kernel.h> #include <linux/mm.h> +#include <linux/slab.h> #include <linux/spinlock.h> #include <linux/vmalloc.h> @@ -207,7 +208,7 @@ static int manage_bandwidth(struct fw_card *card, int irm_id, int generation, for (try = 0; try < 5; try++) { new = allocate ? old - bandwidth : old + bandwidth; if (new < 0 || new > BANDWIDTH_AVAILABLE_INITIAL) - break; + return -EBUSY; data[0] = cpu_to_be32(old); data[1] = cpu_to_be32(new); @@ -235,7 +236,7 @@ static int manage_channel(struct fw_card *card, int irm_id, int generation, u32 channels_mask, u64 offset, bool allocate, __be32 data[2]) { __be32 c, all, old; - int i, retry = 5; + int i, ret = -EIO, retry = 5; old = all = allocate ? cpu_to_be32(~0) : 0; @@ -243,6 +244,8 @@ static int manage_channel(struct fw_card *card, int irm_id, int generation, if (!(channels_mask & 1 << i)) continue; + ret = -EBUSY; + c = cpu_to_be32(1 << (31 - i)); if ((old & c) != (all & c)) continue; @@ -268,12 +271,16 @@ static int manage_channel(struct fw_card *card, int irm_id, int generation, /* 1394-1995 IRM, fall through to retry. */ default: - if (retry--) + if (retry) { + retry--; i--; + } else { + ret = -EIO; + } } } - return -EIO; + return ret; } static void deallocate_channel(struct fw_card *card, int irm_id, diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c index 4bb3fb882f63..da17d409a244 100644 --- a/drivers/firewire/net.c +++ b/drivers/firewire/net.c @@ -21,6 +21,7 @@ #include <linux/mutex.h> #include <linux/netdevice.h> #include <linux/skbuff.h> +#include <linux/slab.h> #include <linux/spinlock.h> #include <asm/unaligned.h> diff --git a/drivers/firewire/nosy-user.h b/drivers/firewire/nosy-user.h new file mode 100644 index 000000000000..e48aa6200c72 --- /dev/null +++ b/drivers/firewire/nosy-user.h @@ -0,0 +1,25 @@ +#ifndef __nosy_user_h +#define __nosy_user_h + +#include <linux/ioctl.h> +#include <linux/types.h> + +#define NOSY_IOC_GET_STATS _IOR('&', 0, struct nosy_stats) +#define NOSY_IOC_START _IO('&', 1) +#define NOSY_IOC_STOP _IO('&', 2) +#define NOSY_IOC_FILTER _IOW('&', 2, __u32) + +struct nosy_stats { + __u32 total_packet_count; + __u32 lost_packet_count; +}; + +/* + * Format of packets returned from the kernel driver: + * + * quadlet with timestamp (microseconds, CPU endian) + * quadlet-padded packet data... (little endian) + * quadlet with ack (little endian) + */ + +#endif /* __nosy_user_h */ diff --git a/drivers/firewire/nosy.c b/drivers/firewire/nosy.c new file mode 100644 index 000000000000..8528b10763ed --- /dev/null +++ b/drivers/firewire/nosy.c @@ -0,0 +1,721 @@ +/* + * nosy - Snoop mode driver for TI PCILynx 1394 controllers + * Copyright (C) 2002-2007 Kristian Høgsberg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/kref.h> +#include <linux/miscdevice.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/pci.h> +#include <linux/poll.h> +#include <linux/sched.h> /* required for linux/wait.h */ +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/timex.h> +#include <linux/uaccess.h> +#include <linux/wait.h> + +#include <asm/atomic.h> +#include <asm/byteorder.h> + +#include "nosy.h" +#include "nosy-user.h" + +#define TCODE_PHY_PACKET 0x10 +#define PCI_DEVICE_ID_TI_PCILYNX 0x8000 + +static char driver_name[] = KBUILD_MODNAME; + +/* this is the physical layout of a PCL, its size is 128 bytes */ +struct pcl { + __le32 next; + __le32 async_error_next; + u32 user_data; + __le32 pcl_status; + __le32 remaining_transfer_count; + __le32 next_data_buffer; + struct { + __le32 control; + __le32 pointer; + } buffer[13]; +}; + +struct packet { + unsigned int length; + char data[0]; +}; + +struct packet_buffer { + char *data; + size_t capacity; + long total_packet_count, lost_packet_count; + atomic_t size; + struct packet *head, *tail; + wait_queue_head_t wait; +}; + +struct pcilynx { + struct pci_dev *pci_device; + __iomem char *registers; + + struct pcl *rcv_start_pcl, *rcv_pcl; + __le32 *rcv_buffer; + + dma_addr_t rcv_start_pcl_bus, rcv_pcl_bus, rcv_buffer_bus; + + spinlock_t client_list_lock; + struct list_head client_list; + + struct miscdevice misc; + struct list_head link; + struct kref kref; +}; + +static inline struct pcilynx * +lynx_get(struct pcilynx *lynx) +{ + kref_get(&lynx->kref); + + return lynx; +} + +static void +lynx_release(struct kref *kref) +{ + kfree(container_of(kref, struct pcilynx, kref)); +} + +static inline void +lynx_put(struct pcilynx *lynx) +{ + kref_put(&lynx->kref, lynx_release); +} + +struct client { + struct pcilynx *lynx; + u32 tcode_mask; + struct packet_buffer buffer; + struct list_head link; +}; + +static DEFINE_MUTEX(card_mutex); +static LIST_HEAD(card_list); + +static int +packet_buffer_init(struct packet_buffer *buffer, size_t capacity) +{ + buffer->data = kmalloc(capacity, GFP_KERNEL); + if (buffer->data == NULL) + return -ENOMEM; + buffer->head = (struct packet *) buffer->data; + buffer->tail = (struct packet *) buffer->data; + buffer->capacity = capacity; + buffer->lost_packet_count = 0; + atomic_set(&buffer->size, 0); + init_waitqueue_head(&buffer->wait); + + return 0; +} + +static void +packet_buffer_destroy(struct packet_buffer *buffer) +{ + kfree(buffer->data); +} + +static int +packet_buffer_get(struct client *client, char __user *data, size_t user_length) +{ + struct packet_buffer *buffer = &client->buffer; + size_t length; + char *end; + + if (wait_event_interruptible(buffer->wait, + atomic_read(&buffer->size) > 0) || + list_empty(&client->lynx->link)) + return -ERESTARTSYS; + + if (atomic_read(&buffer->size) == 0) + return -ENODEV; + + /* FIXME: Check length <= user_length. */ + + end = buffer->data + buffer->capacity; + length = buffer->head->length; + + if (&buffer->head->data[length] < end) { + if (copy_to_user(data, buffer->head->data, length)) + return -EFAULT; + buffer->head = (struct packet *) &buffer->head->data[length]; + } else { + size_t split = end - buffer->head->data; + + if (copy_to_user(data, buffer->head->data, split)) + return -EFAULT; + if (copy_to_user(data + split, buffer->data, length - split)) + return -EFAULT; + buffer->head = (struct packet *) &buffer->data[length - split]; + } + + /* + * Decrease buffer->size as the last thing, since this is what + * keeps the interrupt from overwriting the packet we are + * retrieving from the buffer. + */ + atomic_sub(sizeof(struct packet) + length, &buffer->size); + + return length; +} + +static void +packet_buffer_put(struct packet_buffer *buffer, void *data, size_t length) +{ + char *end; + + buffer->total_packet_count++; + + if (buffer->capacity < + atomic_read(&buffer->size) + sizeof(struct packet) + length) { + buffer->lost_packet_count++; + return; + } + + end = buffer->data + buffer->capacity; + buffer->tail->length = length; + + if (&buffer->tail->data[length] < end) { + memcpy(buffer->tail->data, data, length); + buffer->tail = (struct packet *) &buffer->tail->data[length]; + } else { + size_t split = end - buffer->tail->data; + + memcpy(buffer->tail->data, data, split); + memcpy(buffer->data, data + split, length - split); + buffer->tail = (struct packet *) &buffer->data[length - split]; + } + + /* Finally, adjust buffer size and wake up userspace reader. */ + + atomic_add(sizeof(struct packet) + length, &buffer->size); + wake_up_interruptible(&buffer->wait); +} + +static inline void +reg_write(struct pcilynx *lynx, int offset, u32 data) +{ + writel(data, lynx->registers + offset); +} + +static inline u32 +reg_read(struct pcilynx *lynx, int offset) +{ + return readl(lynx->registers + offset); +} + +static inline void +reg_set_bits(struct pcilynx *lynx, int offset, u32 mask) +{ + reg_write(lynx, offset, (reg_read(lynx, offset) | mask)); +} + +/* + * Maybe the pcl programs could be set up to just append data instead + * of using a whole packet. + */ +static inline void +run_pcl(struct pcilynx *lynx, dma_addr_t pcl_bus, + int dmachan) +{ + reg_write(lynx, DMA0_CURRENT_PCL + dmachan * 0x20, pcl_bus); + reg_write(lynx, DMA0_CHAN_CTRL + dmachan * 0x20, + DMA_CHAN_CTRL_ENABLE | DMA_CHAN_CTRL_LINK); +} + +static int +set_phy_reg(struct pcilynx *lynx, int addr, int val) +{ + if (addr > 15) { + dev_err(&lynx->pci_device->dev, + "PHY register address %d out of range\n", addr); + return -1; + } + if (val > 0xff) { + dev_err(&lynx->pci_device->dev, + "PHY register value %d out of range\n", val); + return -1; + } + reg_write(lynx, LINK_PHY, LINK_PHY_WRITE | + LINK_PHY_ADDR(addr) | LINK_PHY_WDATA(val)); + + return 0; +} + +static int +nosy_open(struct inode *inode, struct file *file) +{ + int minor = iminor(inode); + struct client *client; + struct pcilynx *tmp, *lynx = NULL; + + mutex_lock(&card_mutex); + list_for_each_entry(tmp, &card_list, link) + if (tmp->misc.minor == minor) { + lynx = lynx_get(tmp); + break; + } + mutex_unlock(&card_mutex); + if (lynx == NULL) + return -ENODEV; + + client = kmalloc(sizeof *client, GFP_KERNEL); + if (client == NULL) + goto fail; + + client->tcode_mask = ~0; + client->lynx = lynx; + INIT_LIST_HEAD(&client->link); + + if (packet_buffer_init(&client->buffer, 128 * 1024) < 0) + goto fail; + + file->private_data = client; + + return 0; +fail: + kfree(client); + lynx_put(lynx); + + return -ENOMEM; +} + +static int +nosy_release(struct inode *inode, struct file *file) +{ + struct client *client = file->private_data; + struct pcilynx *lynx = client->lynx; + + spin_lock_irq(&lynx->client_list_lock); + list_del_init(&client->link); + spin_unlock_irq(&lynx->client_list_lock); + + packet_buffer_destroy(&client->buffer); + kfree(client); + lynx_put(lynx); + + return 0; +} + +static unsigned int +nosy_poll(struct file *file, poll_table *pt) +{ + struct client *client = file->private_data; + unsigned int ret = 0; + + poll_wait(file, &client->buffer.wait, pt); + + if (atomic_read(&client->buffer.size) > 0) + ret = POLLIN | POLLRDNORM; + + if (list_empty(&client->lynx->link)) + ret |= POLLHUP; + + return ret; +} + +static ssize_t +nosy_read(struct file *file, char __user *buffer, size_t count, loff_t *offset) +{ + struct client *client = file->private_data; + + return packet_buffer_get(client, buffer, count); +} + +static long +nosy_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + struct client *client = file->private_data; + spinlock_t *client_list_lock = &client->lynx->client_list_lock; + struct nosy_stats stats; + + switch (cmd) { + case NOSY_IOC_GET_STATS: + spin_lock_irq(client_list_lock); + stats.total_packet_count = client->buffer.total_packet_count; + stats.lost_packet_count = client->buffer.lost_packet_count; + spin_unlock_irq(client_list_lock); + + if (copy_to_user((void __user *) arg, &stats, sizeof stats)) + return -EFAULT; + else + return 0; + + case NOSY_IOC_START: + spin_lock_irq(client_list_lock); + list_add_tail(&client->link, &client->lynx->client_list); + spin_unlock_irq(client_list_lock); + + return 0; + + case NOSY_IOC_STOP: + spin_lock_irq(client_list_lock); + list_del_init(&client->link); + spin_unlock_irq(client_list_lock); + + return 0; + + case NOSY_IOC_FILTER: + spin_lock_irq(client_list_lock); + client->tcode_mask = arg; + spin_unlock_irq(client_list_lock); + + return 0; + + default: + return -EINVAL; + /* Flush buffer, configure filter. */ + } +} + +static const struct file_operations nosy_ops = { + .owner = THIS_MODULE, + .read = nosy_read, + .unlocked_ioctl = nosy_ioctl, + .poll = nosy_poll, + .open = nosy_open, + .release = nosy_release, +}; + +#define PHY_PACKET_SIZE 12 /* 1 payload, 1 inverse, 1 ack = 3 quadlets */ + +static void +packet_irq_handler(struct pcilynx *lynx) +{ + struct client *client; + u32 tcode_mask, tcode; + size_t length; + struct timeval tv; + + /* FIXME: Also report rcv_speed. */ + + length = __le32_to_cpu(lynx->rcv_pcl->pcl_status) & 0x00001fff; + tcode = __le32_to_cpu(lynx->rcv_buffer[1]) >> 4 & 0xf; + + do_gettimeofday(&tv); + lynx->rcv_buffer[0] = (__force __le32)tv.tv_usec; + + if (length == PHY_PACKET_SIZE) + tcode_mask = 1 << TCODE_PHY_PACKET; + else + tcode_mask = 1 << tcode; + + spin_lock(&lynx->client_list_lock); + + list_for_each_entry(client, &lynx->client_list, link) + if (client->tcode_mask & tcode_mask) + packet_buffer_put(&client->buffer, + lynx->rcv_buffer, length + 4); + + spin_unlock(&lynx->client_list_lock); +} + +static void +bus_reset_irq_handler(struct pcilynx *lynx) +{ + struct client *client; + struct timeval tv; + + do_gettimeofday(&tv); + + spin_lock(&lynx->client_list_lock); + + list_for_each_entry(client, &lynx->client_list, link) + packet_buffer_put(&client->buffer, &tv.tv_usec, 4); + + spin_unlock(&lynx->client_list_lock); +} + +static irqreturn_t +irq_handler(int irq, void *device) +{ + struct pcilynx *lynx = device; + u32 pci_int_status; + + pci_int_status = reg_read(lynx, PCI_INT_STATUS); + + if (pci_int_status == ~0) + /* Card was ejected. */ + return IRQ_NONE; + + if ((pci_int_status & PCI_INT_INT_PEND) == 0) + /* Not our interrupt, bail out quickly. */ + return IRQ_NONE; + + if ((pci_int_status & PCI_INT_P1394_INT) != 0) { + u32 link_int_status; + + link_int_status = reg_read(lynx, LINK_INT_STATUS); + reg_write(lynx, LINK_INT_STATUS, link_int_status); + + if ((link_int_status & LINK_INT_PHY_BUSRESET) > 0) + bus_reset_irq_handler(lynx); + } + + /* Clear the PCI_INT_STATUS register only after clearing the + * LINK_INT_STATUS register; otherwise the PCI_INT_P1394 will + * be set again immediately. */ + + reg_write(lynx, PCI_INT_STATUS, pci_int_status); + + if ((pci_int_status & PCI_INT_DMA0_HLT) > 0) { + packet_irq_handler(lynx); + run_pcl(lynx, lynx->rcv_start_pcl_bus, 0); + } + + return IRQ_HANDLED; +} + +static void +remove_card(struct pci_dev *dev) +{ + struct pcilynx *lynx = pci_get_drvdata(dev); + struct client *client; + + mutex_lock(&card_mutex); + list_del_init(&lynx->link); + misc_deregister(&lynx->misc); + mutex_unlock(&card_mutex); + + reg_write(lynx, PCI_INT_ENABLE, 0); + free_irq(lynx->pci_device->irq, lynx); + + spin_lock_irq(&lynx->client_list_lock); + list_for_each_entry(client, &lynx->client_list, link) + wake_up_interruptible(&client->buffer.wait); + spin_unlock_irq(&lynx->client_list_lock); + + pci_free_consistent(lynx->pci_device, sizeof(struct pcl), + lynx->rcv_start_pcl, lynx->rcv_start_pcl_bus); + pci_free_consistent(lynx->pci_device, sizeof(struct pcl), + lynx->rcv_pcl, lynx->rcv_pcl_bus); + pci_free_consistent(lynx->pci_device, PAGE_SIZE, + lynx->rcv_buffer, lynx->rcv_buffer_bus); + + iounmap(lynx->registers); + pci_disable_device(dev); + lynx_put(lynx); +} + +#define RCV_BUFFER_SIZE (16 * 1024) + +static int __devinit +add_card(struct pci_dev *dev, const struct pci_device_id *unused) +{ + struct pcilynx *lynx; + u32 p, end; + int ret, i; + + if (pci_set_dma_mask(dev, 0xffffffff)) { + dev_err(&dev->dev, + "DMA address limits not supported for PCILynx hardware\n"); + return -ENXIO; + } + if (pci_enable_device(dev)) { + dev_err(&dev->dev, "Failed to enable PCILynx hardware\n"); + return -ENXIO; + } + pci_set_master(dev); + + lynx = kzalloc(sizeof *lynx, GFP_KERNEL); + if (lynx == NULL) { + dev_err(&dev->dev, "Failed to allocate control structure\n"); + ret = -ENOMEM; + goto fail_disable; + } + lynx->pci_device = dev; + pci_set_drvdata(dev, lynx); + + spin_lock_init(&lynx->client_list_lock); + INIT_LIST_HEAD(&lynx->client_list); + kref_init(&lynx->kref); + + lynx->registers = ioremap_nocache(pci_resource_start(dev, 0), + PCILYNX_MAX_REGISTER); + + lynx->rcv_start_pcl = pci_alloc_consistent(lynx->pci_device, + sizeof(struct pcl), &lynx->rcv_start_pcl_bus); + lynx->rcv_pcl = pci_alloc_consistent(lynx->pci_device, + sizeof(struct pcl), &lynx->rcv_pcl_bus); + lynx->rcv_buffer = pci_alloc_consistent(lynx->pci_device, + RCV_BUFFER_SIZE, &lynx->rcv_buffer_bus); + if (lynx->rcv_start_pcl == NULL || + lynx->rcv_pcl == NULL || + lynx->rcv_buffer == NULL) { + dev_err(&dev->dev, "Failed to allocate receive buffer\n"); + ret = -ENOMEM; + goto fail_deallocate; + } + lynx->rcv_start_pcl->next = cpu_to_le32(lynx->rcv_pcl_bus); + lynx->rcv_pcl->next = cpu_to_le32(PCL_NEXT_INVALID); + lynx->rcv_pcl->async_error_next = cpu_to_le32(PCL_NEXT_INVALID); + + lynx->rcv_pcl->buffer[0].control = + cpu_to_le32(PCL_CMD_RCV | PCL_BIGENDIAN | 2044); + lynx->rcv_pcl->buffer[0].pointer = + cpu_to_le32(lynx->rcv_buffer_bus + 4); + p = lynx->rcv_buffer_bus + 2048; + end = lynx->rcv_buffer_bus + RCV_BUFFER_SIZE; + for (i = 1; p < end; i++, p += 2048) { + lynx->rcv_pcl->buffer[i].control = + cpu_to_le32(PCL_CMD_RCV | PCL_BIGENDIAN | 2048); + lynx->rcv_pcl->buffer[i].pointer = cpu_to_le32(p); + } + lynx->rcv_pcl->buffer[i - 1].control |= cpu_to_le32(PCL_LAST_BUFF); + + reg_set_bits(lynx, MISC_CONTROL, MISC_CONTROL_SWRESET); + /* Fix buggy cards with autoboot pin not tied low: */ + reg_write(lynx, DMA0_CHAN_CTRL, 0); + reg_write(lynx, DMA_GLOBAL_REGISTER, 0x00 << 24); + +#if 0 + /* now, looking for PHY register set */ + if ((get_phy_reg(lynx, 2) & 0xe0) == 0xe0) { + lynx->phyic.reg_1394a = 1; + PRINT(KERN_INFO, lynx->id, + "found 1394a conform PHY (using extended register set)"); + lynx->phyic.vendor = get_phy_vendorid(lynx); + lynx->phyic.product = get_phy_productid(lynx); + } else { + lynx->phyic.reg_1394a = 0; + PRINT(KERN_INFO, lynx->id, "found old 1394 PHY"); + } +#endif + + /* Setup the general receive FIFO max size. */ + reg_write(lynx, FIFO_SIZES, 255); + + reg_set_bits(lynx, PCI_INT_ENABLE, PCI_INT_DMA_ALL); + + reg_write(lynx, LINK_INT_ENABLE, + LINK_INT_PHY_TIME_OUT | LINK_INT_PHY_REG_RCVD | + LINK_INT_PHY_BUSRESET | LINK_INT_IT_STUCK | + LINK_INT_AT_STUCK | LINK_INT_SNTRJ | + LINK_INT_TC_ERR | LINK_INT_GRF_OVER_FLOW | + LINK_INT_ITF_UNDER_FLOW | LINK_INT_ATF_UNDER_FLOW); + + /* Disable the L flag in self ID packets. */ + set_phy_reg(lynx, 4, 0); + + /* Put this baby into snoop mode */ + reg_set_bits(lynx, LINK_CONTROL, LINK_CONTROL_SNOOP_ENABLE); + + run_pcl(lynx, lynx->rcv_start_pcl_bus, 0); + + if (request_irq(dev->irq, irq_handler, IRQF_SHARED, + driver_name, lynx)) { + dev_err(&dev->dev, + "Failed to allocate shared interrupt %d\n", dev->irq); + ret = -EIO; + goto fail_deallocate; + } + + lynx->misc.parent = &dev->dev; + lynx->misc.minor = MISC_DYNAMIC_MINOR; + lynx->misc.name = "nosy"; + lynx->misc.fops = &nosy_ops; + + mutex_lock(&card_mutex); + ret = misc_register(&lynx->misc); + if (ret) { + dev_err(&dev->dev, "Failed to register misc char device\n"); + mutex_unlock(&card_mutex); + goto fail_free_irq; + } + list_add_tail(&lynx->link, &card_list); + mutex_unlock(&card_mutex); + + dev_info(&dev->dev, + "Initialized PCILynx IEEE1394 card, irq=%d\n", dev->irq); + + return 0; + +fail_free_irq: + reg_write(lynx, PCI_INT_ENABLE, 0); + free_irq(lynx->pci_device->irq, lynx); + +fail_deallocate: + if (lynx->rcv_start_pcl) + pci_free_consistent(lynx->pci_device, sizeof(struct pcl), + lynx->rcv_start_pcl, lynx->rcv_start_pcl_bus); + if (lynx->rcv_pcl) + pci_free_consistent(lynx->pci_device, sizeof(struct pcl), + lynx->rcv_pcl, lynx->rcv_pcl_bus); + if (lynx->rcv_buffer) + pci_free_consistent(lynx->pci_device, PAGE_SIZE, + lynx->rcv_buffer, lynx->rcv_buffer_bus); + iounmap(lynx->registers); + kfree(lynx); + +fail_disable: + pci_disable_device(dev); + + return ret; +} + +static struct pci_device_id pci_table[] __devinitdata = { + { + .vendor = PCI_VENDOR_ID_TI, + .device = PCI_DEVICE_ID_TI_PCILYNX, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + }, + { } /* Terminating entry */ +}; + +static struct pci_driver lynx_pci_driver = { + .name = driver_name, + .id_table = pci_table, + .probe = add_card, + .remove = remove_card, +}; + +MODULE_AUTHOR("Kristian Hoegsberg"); +MODULE_DESCRIPTION("Snoop mode driver for TI pcilynx 1394 controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, pci_table); + +static int __init nosy_init(void) +{ + return pci_register_driver(&lynx_pci_driver); +} + +static void __exit nosy_cleanup(void) +{ + pci_unregister_driver(&lynx_pci_driver); + + pr_info("Unloaded %s\n", driver_name); +} + +module_init(nosy_init); +module_exit(nosy_cleanup); diff --git a/drivers/firewire/nosy.h b/drivers/firewire/nosy.h new file mode 100644 index 000000000000..078ff27f4756 --- /dev/null +++ b/drivers/firewire/nosy.h @@ -0,0 +1,237 @@ +/* + * Chip register definitions for PCILynx chipset. Based on pcilynx.h + * from the Linux 1394 drivers, but modified a bit so the names here + * match the specification exactly (even though they have weird names, + * like xxx_OVER_FLOW, or arbitrary abbreviations like SNTRJ for "sent + * reject" etc.) + */ + +#define PCILYNX_MAX_REGISTER 0xfff +#define PCILYNX_MAX_MEMORY 0xffff + +#define PCI_LATENCY_CACHELINE 0x0c + +#define MISC_CONTROL 0x40 +#define MISC_CONTROL_SWRESET (1<<0) + +#define SERIAL_EEPROM_CONTROL 0x44 + +#define PCI_INT_STATUS 0x48 +#define PCI_INT_ENABLE 0x4c +/* status and enable have identical bit numbers */ +#define PCI_INT_INT_PEND (1<<31) +#define PCI_INT_FRC_INT (1<<30) +#define PCI_INT_SLV_ADR_PERR (1<<28) +#define PCI_INT_SLV_DAT_PERR (1<<27) +#define PCI_INT_MST_DAT_PERR (1<<26) +#define PCI_INT_MST_DEV_TO (1<<25) +#define PCI_INT_INT_SLV_TO (1<<23) +#define PCI_INT_AUX_TO (1<<18) +#define PCI_INT_AUX_INT (1<<17) +#define PCI_INT_P1394_INT (1<<16) +#define PCI_INT_DMA4_PCL (1<<9) +#define PCI_INT_DMA4_HLT (1<<8) +#define PCI_INT_DMA3_PCL (1<<7) +#define PCI_INT_DMA3_HLT (1<<6) +#define PCI_INT_DMA2_PCL (1<<5) +#define PCI_INT_DMA2_HLT (1<<4) +#define PCI_INT_DMA1_PCL (1<<3) +#define PCI_INT_DMA1_HLT (1<<2) +#define PCI_INT_DMA0_PCL (1<<1) +#define PCI_INT_DMA0_HLT (1<<0) +/* all DMA interrupts combined: */ +#define PCI_INT_DMA_ALL 0x3ff + +#define PCI_INT_DMA_HLT(chan) (1 << (chan * 2)) +#define PCI_INT_DMA_PCL(chan) (1 << (chan * 2 + 1)) + +#define LBUS_ADDR 0xb4 +#define LBUS_ADDR_SEL_RAM (0x0<<16) +#define LBUS_ADDR_SEL_ROM (0x1<<16) +#define LBUS_ADDR_SEL_AUX (0x2<<16) +#define LBUS_ADDR_SEL_ZV (0x3<<16) + +#define GPIO_CTRL_A 0xb8 +#define GPIO_CTRL_B 0xbc +#define GPIO_DATA_BASE 0xc0 + +#define DMA_BREG(base, chan) (base + chan * 0x20) +#define DMA_SREG(base, chan) (base + chan * 0x10) + +#define PCL_NEXT_INVALID (1<<0) + +/* transfer commands */ +#define PCL_CMD_RCV (0x1<<24) +#define PCL_CMD_RCV_AND_UPDATE (0xa<<24) +#define PCL_CMD_XMT (0x2<<24) +#define PCL_CMD_UNFXMT (0xc<<24) +#define PCL_CMD_PCI_TO_LBUS (0x8<<24) +#define PCL_CMD_LBUS_TO_PCI (0x9<<24) + +/* aux commands */ +#define PCL_CMD_NOP (0x0<<24) +#define PCL_CMD_LOAD (0x3<<24) +#define PCL_CMD_STOREQ (0x4<<24) +#define PCL_CMD_STORED (0xb<<24) +#define PCL_CMD_STORE0 (0x5<<24) +#define PCL_CMD_STORE1 (0x6<<24) +#define PCL_CMD_COMPARE (0xe<<24) +#define PCL_CMD_SWAP_COMPARE (0xf<<24) +#define PCL_CMD_ADD (0xd<<24) +#define PCL_CMD_BRANCH (0x7<<24) + +/* BRANCH condition codes */ +#define PCL_COND_DMARDY_SET (0x1<<20) +#define PCL_COND_DMARDY_CLEAR (0x2<<20) + +#define PCL_GEN_INTR (1<<19) +#define PCL_LAST_BUFF (1<<18) +#define PCL_LAST_CMD (PCL_LAST_BUFF) +#define PCL_WAITSTAT (1<<17) +#define PCL_BIGENDIAN (1<<16) +#define PCL_ISOMODE (1<<12) + +#define DMA0_PREV_PCL 0x100 +#define DMA1_PREV_PCL 0x120 +#define DMA2_PREV_PCL 0x140 +#define DMA3_PREV_PCL 0x160 +#define DMA4_PREV_PCL 0x180 +#define DMA_PREV_PCL(chan) (DMA_BREG(DMA0_PREV_PCL, chan)) + +#define DMA0_CURRENT_PCL 0x104 +#define DMA1_CURRENT_PCL 0x124 +#define DMA2_CURRENT_PCL 0x144 +#define DMA3_CURRENT_PCL 0x164 +#define DMA4_CURRENT_PCL 0x184 +#define DMA_CURRENT_PCL(chan) (DMA_BREG(DMA0_CURRENT_PCL, chan)) + +#define DMA0_CHAN_STAT 0x10c +#define DMA1_CHAN_STAT 0x12c +#define DMA2_CHAN_STAT 0x14c +#define DMA3_CHAN_STAT 0x16c +#define DMA4_CHAN_STAT 0x18c +#define DMA_CHAN_STAT(chan) (DMA_BREG(DMA0_CHAN_STAT, chan)) +/* CHAN_STATUS registers share bits */ +#define DMA_CHAN_STAT_SELFID (1<<31) +#define DMA_CHAN_STAT_ISOPKT (1<<30) +#define DMA_CHAN_STAT_PCIERR (1<<29) +#define DMA_CHAN_STAT_PKTERR (1<<28) +#define DMA_CHAN_STAT_PKTCMPL (1<<27) +#define DMA_CHAN_STAT_SPECIALACK (1<<14) + +#define DMA0_CHAN_CTRL 0x110 +#define DMA1_CHAN_CTRL 0x130 +#define DMA2_CHAN_CTRL 0x150 +#define DMA3_CHAN_CTRL 0x170 +#define DMA4_CHAN_CTRL 0x190 +#define DMA_CHAN_CTRL(chan) (DMA_BREG(DMA0_CHAN_CTRL, chan)) +/* CHAN_CTRL registers share bits */ +#define DMA_CHAN_CTRL_ENABLE (1<<31) +#define DMA_CHAN_CTRL_BUSY (1<<30) +#define DMA_CHAN_CTRL_LINK (1<<29) + +#define DMA0_READY 0x114 +#define DMA1_READY 0x134 +#define DMA2_READY 0x154 +#define DMA3_READY 0x174 +#define DMA4_READY 0x194 +#define DMA_READY(chan) (DMA_BREG(DMA0_READY, chan)) + +#define DMA_GLOBAL_REGISTER 0x908 + +#define FIFO_SIZES 0xa00 + +#define FIFO_CONTROL 0xa10 +#define FIFO_CONTROL_GRF_FLUSH (1<<4) +#define FIFO_CONTROL_ITF_FLUSH (1<<3) +#define FIFO_CONTROL_ATF_FLUSH (1<<2) + +#define FIFO_XMIT_THRESHOLD 0xa14 + +#define DMA0_WORD0_CMP_VALUE 0xb00 +#define DMA1_WORD0_CMP_VALUE 0xb10 +#define DMA2_WORD0_CMP_VALUE 0xb20 +#define DMA3_WORD0_CMP_VALUE 0xb30 +#define DMA4_WORD0_CMP_VALUE 0xb40 +#define DMA_WORD0_CMP_VALUE(chan) (DMA_SREG(DMA0_WORD0_CMP_VALUE, chan)) + +#define DMA0_WORD0_CMP_ENABLE 0xb04 +#define DMA1_WORD0_CMP_ENABLE 0xb14 +#define DMA2_WORD0_CMP_ENABLE 0xb24 +#define DMA3_WORD0_CMP_ENABLE 0xb34 +#define DMA4_WORD0_CMP_ENABLE 0xb44 +#define DMA_WORD0_CMP_ENABLE(chan) (DMA_SREG(DMA0_WORD0_CMP_ENABLE, chan)) + +#define DMA0_WORD1_CMP_VALUE 0xb08 +#define DMA1_WORD1_CMP_VALUE 0xb18 +#define DMA2_WORD1_CMP_VALUE 0xb28 +#define DMA3_WORD1_CMP_VALUE 0xb38 +#define DMA4_WORD1_CMP_VALUE 0xb48 +#define DMA_WORD1_CMP_VALUE(chan) (DMA_SREG(DMA0_WORD1_CMP_VALUE, chan)) + +#define DMA0_WORD1_CMP_ENABLE 0xb0c +#define DMA1_WORD1_CMP_ENABLE 0xb1c +#define DMA2_WORD1_CMP_ENABLE 0xb2c +#define DMA3_WORD1_CMP_ENABLE 0xb3c +#define DMA4_WORD1_CMP_ENABLE 0xb4c +#define DMA_WORD1_CMP_ENABLE(chan) (DMA_SREG(DMA0_WORD1_CMP_ENABLE, chan)) +/* word 1 compare enable flags */ +#define DMA_WORD1_CMP_MATCH_OTHERBUS (1<<15) +#define DMA_WORD1_CMP_MATCH_BROADCAST (1<<14) +#define DMA_WORD1_CMP_MATCH_BUS_BCAST (1<<13) +#define DMA_WORD1_CMP_MATCH_LOCAL_NODE (1<<12) +#define DMA_WORD1_CMP_MATCH_EXACT (1<<11) +#define DMA_WORD1_CMP_ENABLE_SELF_ID (1<<10) +#define DMA_WORD1_CMP_ENABLE_MASTER (1<<8) + +#define LINK_ID 0xf00 +#define LINK_ID_BUS(id) (id<<22) +#define LINK_ID_NODE(id) (id<<16) + +#define LINK_CONTROL 0xf04 +#define LINK_CONTROL_BUSY (1<<29) +#define LINK_CONTROL_TX_ISO_EN (1<<26) +#define LINK_CONTROL_RX_ISO_EN (1<<25) +#define LINK_CONTROL_TX_ASYNC_EN (1<<24) +#define LINK_CONTROL_RX_ASYNC_EN (1<<23) +#define LINK_CONTROL_RESET_TX (1<<21) +#define LINK_CONTROL_RESET_RX (1<<20) +#define LINK_CONTROL_CYCMASTER (1<<11) +#define LINK_CONTROL_CYCSOURCE (1<<10) +#define LINK_CONTROL_CYCTIMEREN (1<<9) +#define LINK_CONTROL_RCV_CMP_VALID (1<<7) +#define LINK_CONTROL_SNOOP_ENABLE (1<<6) + +#define CYCLE_TIMER 0xf08 + +#define LINK_PHY 0xf0c +#define LINK_PHY_READ (1<<31) +#define LINK_PHY_WRITE (1<<30) +#define LINK_PHY_ADDR(addr) (addr<<24) +#define LINK_PHY_WDATA(data) (data<<16) +#define LINK_PHY_RADDR(addr) (addr<<8) + +#define LINK_INT_STATUS 0xf14 +#define LINK_INT_ENABLE 0xf18 +/* status and enable have identical bit numbers */ +#define LINK_INT_LINK_INT (1<<31) +#define LINK_INT_PHY_TIME_OUT (1<<30) +#define LINK_INT_PHY_REG_RCVD (1<<29) +#define LINK_INT_PHY_BUSRESET (1<<28) +#define LINK_INT_TX_RDY (1<<26) +#define LINK_INT_RX_DATA_RDY (1<<25) +#define LINK_INT_IT_STUCK (1<<20) +#define LINK_INT_AT_STUCK (1<<19) +#define LINK_INT_SNTRJ (1<<17) +#define LINK_INT_HDR_ERR (1<<16) +#define LINK_INT_TC_ERR (1<<15) +#define LINK_INT_CYC_SEC (1<<11) +#define LINK_INT_CYC_STRT (1<<10) +#define LINK_INT_CYC_DONE (1<<9) +#define LINK_INT_CYC_PEND (1<<8) +#define LINK_INT_CYC_LOST (1<<7) +#define LINK_INT_CYC_ARB_FAILED (1<<6) +#define LINK_INT_GRF_OVER_FLOW (1<<5) +#define LINK_INT_ITF_UNDER_FLOW (1<<4) +#define LINK_INT_ATF_UNDER_FLOW (1<<3) +#define LINK_INT_IARB_FAILED (1<<0) diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index 4bda1c1b74ba..7f03540cabe8 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -25,7 +25,6 @@ #include <linux/dma-mapping.h> #include <linux/firewire.h> #include <linux/firewire-constants.h> -#include <linux/gfp.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/io.h> @@ -37,8 +36,10 @@ #include <linux/mutex.h> #include <linux/pci.h> #include <linux/pci_ids.h> +#include <linux/slab.h> #include <linux/spinlock.h> #include <linux/string.h> +#include <linux/time.h> #include <asm/byteorder.h> #include <asm/page.h> @@ -1256,7 +1257,7 @@ static void handle_local_lock(struct fw_ohci *ohci, struct fw_packet *packet, u32 csr) { struct fw_packet response; - int tcode, length, ext_tcode, sel; + int tcode, length, ext_tcode, sel, try; __be32 *payload, lock_old; u32 lock_arg, lock_data; @@ -1283,21 +1284,26 @@ static void handle_local_lock(struct fw_ohci *ohci, reg_write(ohci, OHCI1394_CSRCompareData, lock_arg); reg_write(ohci, OHCI1394_CSRControl, sel); - if (reg_read(ohci, OHCI1394_CSRControl) & 0x80000000) - lock_old = cpu_to_be32(reg_read(ohci, OHCI1394_CSRData)); - else - fw_notify("swap not done yet\n"); + for (try = 0; try < 20; try++) + if (reg_read(ohci, OHCI1394_CSRControl) & 0x80000000) { + lock_old = cpu_to_be32(reg_read(ohci, + OHCI1394_CSRData)); + fw_fill_response(&response, packet->header, + RCODE_COMPLETE, + &lock_old, sizeof(lock_old)); + goto out; + } + + fw_error("swap not done (CSR lock timeout)\n"); + fw_fill_response(&response, packet->header, RCODE_BUSY, NULL, 0); - fw_fill_response(&response, packet->header, - RCODE_COMPLETE, &lock_old, sizeof(lock_old)); out: fw_core_handle_response(&ohci->card, &response); } static void handle_local_request(struct context *ctx, struct fw_packet *packet) { - u64 offset; - u32 csr; + u64 offset, csr; if (ctx == &ctx->ohci->at_request_ctx) { packet->ack = ACK_PENDING; @@ -1523,7 +1529,7 @@ static void bus_reset_tasklet(unsigned long data) * was set up before this reset, the old one is now no longer * in use and we can free it. Update the config rom pointers * to point to the current config rom and clear the - * next_config_rom pointer so a new udpate can take place. + * next_config_rom pointer so a new update can take place. */ if (ohci->next_config_rom != NULL) { diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c index 1931964c4fbf..9f76171717e5 100644 --- a/drivers/firewire/sbp2.c +++ b/drivers/firewire/sbp2.c @@ -1569,7 +1569,7 @@ static int sbp2_scsi_slave_configure(struct scsi_device *sdev) sdev->start_stop_pwr_cond = 1; if (lu->tgt->workarounds & SBP2_WORKAROUND_128K_MAX_TRANS) - blk_queue_max_sectors(sdev->request_queue, 128 * 1024 / 512); + blk_queue_max_hw_sectors(sdev->request_queue, 128 * 1024 / 512); blk_queue_max_segment_size(sdev->request_queue, SBP2_MAX_SEG_SIZE); |