diff options
Diffstat (limited to 'drivers/extcon')
| -rw-r--r-- | drivers/extcon/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/extcon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/extcon/extcon-arizona.c | 1819 | 
3 files changed, 0 insertions, 1828 deletions
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index af58ebca2bf6..e3db936becfd 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -21,14 +21,6 @@ config EXTCON_ADC_JACK  	help  	  Say Y here to enable extcon device driver based on ADC values. -config EXTCON_ARIZONA -	tristate "Wolfson Arizona EXTCON support" -	depends on MFD_ARIZONA && INPUT && SND_SOC -	help -	  Say Y here to enable support for external accessory detection -	  with Wolfson Arizona devices. These are audio CODECs with -	  advanced audio accessory detection support. -  config EXTCON_AXP288  	tristate "X-Power AXP288 EXTCON support"  	depends on MFD_AXP20X && USB_SUPPORT && X86 && ACPI diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile index fe10a1b7d18b..1b390d934ca9 100644 --- a/drivers/extcon/Makefile +++ b/drivers/extcon/Makefile @@ -6,7 +6,6 @@  obj-$(CONFIG_EXTCON)		+= extcon-core.o  extcon-core-objs		+= extcon.o devres.o  obj-$(CONFIG_EXTCON_ADC_JACK)	+= extcon-adc-jack.o -obj-$(CONFIG_EXTCON_ARIZONA)	+= extcon-arizona.o  obj-$(CONFIG_EXTCON_AXP288)	+= extcon-axp288.o  obj-$(CONFIG_EXTCON_FSA9480)	+= extcon-fsa9480.o  obj-$(CONFIG_EXTCON_GPIO)	+= extcon-gpio.o diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c deleted file mode 100644 index 56d2ce05de50..000000000000 --- a/drivers/extcon/extcon-arizona.c +++ /dev/null @@ -1,1819 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * extcon-arizona.c - Extcon driver Wolfson Arizona devices - * - *  Copyright (C) 2012-2014 Wolfson Microelectronics plc - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/i2c.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/err.h> -#include <linux/gpio/consumer.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/platform_device.h> -#include <linux/pm_runtime.h> -#include <linux/property.h> -#include <linux/regulator/consumer.h> -#include <linux/extcon-provider.h> - -#include <sound/soc.h> - -#include <linux/mfd/arizona/core.h> -#include <linux/mfd/arizona/pdata.h> -#include <linux/mfd/arizona/registers.h> -#include <dt-bindings/mfd/arizona.h> - -#define ARIZONA_MAX_MICD_RANGE 8 - -#define ARIZONA_MICD_CLAMP_MODE_JDL      0x4 -#define ARIZONA_MICD_CLAMP_MODE_JDH      0x5 -#define ARIZONA_MICD_CLAMP_MODE_JDL_GP5H 0x9 -#define ARIZONA_MICD_CLAMP_MODE_JDH_GP5H 0xb - -#define ARIZONA_TST_CAP_DEFAULT 0x3 -#define ARIZONA_TST_CAP_CLAMP   0x1 - -#define ARIZONA_HPDET_MAX 10000 - -#define HPDET_DEBOUNCE 500 -#define DEFAULT_MICD_TIMEOUT 2000 - -#define ARIZONA_HPDET_WAIT_COUNT 15 -#define ARIZONA_HPDET_WAIT_DELAY_MS 20 - -#define QUICK_HEADPHONE_MAX_OHM 3 -#define MICROPHONE_MIN_OHM      1257 -#define MICROPHONE_MAX_OHM      30000 - -#define MICD_DBTIME_TWO_READINGS 2 -#define MICD_DBTIME_FOUR_READINGS 4 - -#define MICD_LVL_1_TO_7 (ARIZONA_MICD_LVL_1 | ARIZONA_MICD_LVL_2 | \ -			 ARIZONA_MICD_LVL_3 | ARIZONA_MICD_LVL_4 | \ -			 ARIZONA_MICD_LVL_5 | ARIZONA_MICD_LVL_6 | \ -			 ARIZONA_MICD_LVL_7) - -#define MICD_LVL_0_TO_7 (ARIZONA_MICD_LVL_0 | MICD_LVL_1_TO_7) - -#define MICD_LVL_0_TO_8 (MICD_LVL_0_TO_7 | ARIZONA_MICD_LVL_8) - -struct arizona_extcon_info { -	struct device *dev; -	struct arizona *arizona; -	struct mutex lock; -	struct regulator *micvdd; -	struct input_dev *input; - -	u16 last_jackdet; - -	int micd_mode; -	const struct arizona_micd_config *micd_modes; -	int micd_num_modes; - -	const struct arizona_micd_range *micd_ranges; -	int num_micd_ranges; - -	bool micd_reva; -	bool micd_clamp; - -	struct delayed_work hpdet_work; -	struct delayed_work micd_detect_work; -	struct delayed_work micd_timeout_work; - -	bool hpdet_active; -	bool hpdet_done; -	bool hpdet_retried; - -	int num_hpdet_res; -	unsigned int hpdet_res[3]; - -	bool mic; -	bool detecting; -	int jack_flips; - -	int hpdet_ip_version; - -	struct extcon_dev *edev; - -	struct gpio_desc *micd_pol_gpio; -}; - -static const struct arizona_micd_config micd_default_modes[] = { -	{ ARIZONA_ACCDET_SRC, 1, 0 }, -	{ 0,                  2, 1 }, -}; - -static const struct arizona_micd_range micd_default_ranges[] = { -	{ .max =  11, .key = BTN_0 }, -	{ .max =  28, .key = BTN_1 }, -	{ .max =  54, .key = BTN_2 }, -	{ .max = 100, .key = BTN_3 }, -	{ .max = 186, .key = BTN_4 }, -	{ .max = 430, .key = BTN_5 }, -}; - -/* The number of levels in arizona_micd_levels valid for button thresholds */ -#define ARIZONA_NUM_MICD_BUTTON_LEVELS 64 - -static const int arizona_micd_levels[] = { -	3, 6, 8, 11, 13, 16, 18, 21, 23, 26, 28, 31, 34, 36, 39, 41, 44, 46, -	49, 52, 54, 57, 60, 62, 65, 67, 70, 73, 75, 78, 81, 83, 89, 94, 100, -	105, 111, 116, 122, 127, 139, 150, 161, 173, 186, 196, 209, 220, 245, -	270, 295, 321, 348, 375, 402, 430, 489, 550, 614, 681, 752, 903, 1071, -	1257, 30000, -}; - -static const unsigned int arizona_cable[] = { -	EXTCON_MECHANICAL, -	EXTCON_JACK_MICROPHONE, -	EXTCON_JACK_HEADPHONE, -	EXTCON_JACK_LINE_OUT, -	EXTCON_NONE, -}; - -static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info); - -static void arizona_extcon_hp_clamp(struct arizona_extcon_info *info, -				    bool clamp) -{ -	struct arizona *arizona = info->arizona; -	unsigned int mask = 0, val = 0; -	unsigned int cap_sel = 0; -	int ret; - -	switch (arizona->type) { -	case WM8998: -	case WM1814: -		mask = 0; -		break; -	case WM5110: -	case WM8280: -		mask = ARIZONA_HP1L_SHRTO | ARIZONA_HP1L_FLWR | -		       ARIZONA_HP1L_SHRTI; -		if (clamp) { -			val = ARIZONA_HP1L_SHRTO; -			cap_sel = ARIZONA_TST_CAP_CLAMP; -		} else { -			val = ARIZONA_HP1L_FLWR | ARIZONA_HP1L_SHRTI; -			cap_sel = ARIZONA_TST_CAP_DEFAULT; -		} - -		ret = regmap_update_bits(arizona->regmap, -					 ARIZONA_HP_TEST_CTRL_1, -					 ARIZONA_HP1_TST_CAP_SEL_MASK, -					 cap_sel); -		if (ret != 0) -			dev_warn(arizona->dev, -				 "Failed to set TST_CAP_SEL: %d\n", ret); -		break; -	default: -		mask = ARIZONA_RMV_SHRT_HP1L; -		if (clamp) -			val = ARIZONA_RMV_SHRT_HP1L; -		break; -	} - -	snd_soc_dapm_mutex_lock(arizona->dapm); - -	arizona->hpdet_clamp = clamp; - -	/* Keep the HP output stages disabled while doing the clamp */ -	if (clamp) { -		ret = regmap_update_bits(arizona->regmap, -					 ARIZONA_OUTPUT_ENABLES_1, -					 ARIZONA_OUT1L_ENA | -					 ARIZONA_OUT1R_ENA, 0); -		if (ret != 0) -			dev_warn(arizona->dev, -				"Failed to disable headphone outputs: %d\n", -				 ret); -	} - -	if (mask) { -		ret = regmap_update_bits(arizona->regmap, ARIZONA_HP_CTRL_1L, -					 mask, val); -		if (ret != 0) -			dev_warn(arizona->dev, "Failed to do clamp: %d\n", -				 ret); - -		ret = regmap_update_bits(arizona->regmap, ARIZONA_HP_CTRL_1R, -					 mask, val); -		if (ret != 0) -			dev_warn(arizona->dev, "Failed to do clamp: %d\n", -				 ret); -	} - -	/* Restore the desired state while not doing the clamp */ -	if (!clamp) { -		ret = regmap_update_bits(arizona->regmap, -					 ARIZONA_OUTPUT_ENABLES_1, -					 ARIZONA_OUT1L_ENA | -					 ARIZONA_OUT1R_ENA, arizona->hp_ena); -		if (ret != 0) -			dev_warn(arizona->dev, -				 "Failed to restore headphone outputs: %d\n", -				 ret); -	} - -	snd_soc_dapm_mutex_unlock(arizona->dapm); -} - -static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode) -{ -	struct arizona *arizona = info->arizona; - -	mode %= info->micd_num_modes; - -	gpiod_set_value_cansleep(info->micd_pol_gpio, -				 info->micd_modes[mode].gpio); - -	regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, -			   ARIZONA_MICD_BIAS_SRC_MASK, -			   info->micd_modes[mode].bias << -			   ARIZONA_MICD_BIAS_SRC_SHIFT); -	regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1, -			   ARIZONA_ACCDET_SRC, info->micd_modes[mode].src); - -	info->micd_mode = mode; - -	dev_dbg(arizona->dev, "Set jack polarity to %d\n", mode); -} - -static const char *arizona_extcon_get_micbias(struct arizona_extcon_info *info) -{ -	switch (info->micd_modes[0].bias) { -	case 1: -		return "MICBIAS1"; -	case 2: -		return "MICBIAS2"; -	case 3: -		return "MICBIAS3"; -	default: -		return "MICVDD"; -	} -} - -static void arizona_extcon_pulse_micbias(struct arizona_extcon_info *info) -{ -	struct arizona *arizona = info->arizona; -	const char *widget = arizona_extcon_get_micbias(info); -	struct snd_soc_dapm_context *dapm = arizona->dapm; -	struct snd_soc_component *component = snd_soc_dapm_to_component(dapm); -	int ret; - -	ret = snd_soc_component_force_enable_pin(component, widget); -	if (ret != 0) -		dev_warn(arizona->dev, "Failed to enable %s: %d\n", -			 widget, ret); - -	snd_soc_dapm_sync(dapm); - -	if (!arizona->pdata.micd_force_micbias) { -		ret = snd_soc_component_disable_pin(component, widget); -		if (ret != 0) -			dev_warn(arizona->dev, "Failed to disable %s: %d\n", -				 widget, ret); - -		snd_soc_dapm_sync(dapm); -	} -} - -static void arizona_start_mic(struct arizona_extcon_info *info) -{ -	struct arizona *arizona = info->arizona; -	bool change; -	int ret; -	unsigned int mode; - -	/* Microphone detection can't use idle mode */ -	pm_runtime_get_sync(info->dev); - -	if (info->detecting) { -		ret = regulator_allow_bypass(info->micvdd, false); -		if (ret != 0) { -			dev_err(arizona->dev, -				"Failed to regulate MICVDD: %d\n", -				ret); -		} -	} - -	ret = regulator_enable(info->micvdd); -	if (ret != 0) { -		dev_err(arizona->dev, "Failed to enable MICVDD: %d\n", -			ret); -	} - -	if (info->micd_reva) { -		const struct reg_sequence reva[] = { -			{ 0x80,  0x3 }, -			{ 0x294, 0x0 }, -			{ 0x80,  0x0 }, -		}; - -		regmap_multi_reg_write(arizona->regmap, reva, ARRAY_SIZE(reva)); -	} - -	if (info->detecting && arizona->pdata.micd_software_compare) -		mode = ARIZONA_ACCDET_MODE_ADC; -	else -		mode = ARIZONA_ACCDET_MODE_MIC; - -	regmap_update_bits(arizona->regmap, -			   ARIZONA_ACCESSORY_DETECT_MODE_1, -			   ARIZONA_ACCDET_MODE_MASK, mode); - -	arizona_extcon_pulse_micbias(info); - -	ret = regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1, -				       ARIZONA_MICD_ENA, ARIZONA_MICD_ENA, -				       &change); -	if (ret < 0) { -		dev_err(arizona->dev, "Failed to enable micd: %d\n", ret); -	} else if (!change) { -		regulator_disable(info->micvdd); -		pm_runtime_put_autosuspend(info->dev); -	} -} - -static void arizona_stop_mic(struct arizona_extcon_info *info) -{ -	struct arizona *arizona = info->arizona; -	const char *widget = arizona_extcon_get_micbias(info); -	struct snd_soc_dapm_context *dapm = arizona->dapm; -	struct snd_soc_component *component = snd_soc_dapm_to_component(dapm); -	bool change = false; -	int ret; - -	ret = regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1, -				       ARIZONA_MICD_ENA, 0, -				       &change); -	if (ret < 0) -		dev_err(arizona->dev, "Failed to disable micd: %d\n", ret); - -	ret = snd_soc_component_disable_pin(component, widget); -	if (ret != 0) -		dev_warn(arizona->dev, -			 "Failed to disable %s: %d\n", -			 widget, ret); - -	snd_soc_dapm_sync(dapm); - -	if (info->micd_reva) { -		const struct reg_sequence reva[] = { -			{ 0x80,  0x3 }, -			{ 0x294, 0x2 }, -			{ 0x80,  0x0 }, -		}; - -		regmap_multi_reg_write(arizona->regmap, reva, ARRAY_SIZE(reva)); -	} - -	ret = regulator_allow_bypass(info->micvdd, true); -	if (ret != 0) { -		dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n", -			ret); -	} - -	if (change) { -		regulator_disable(info->micvdd); -		pm_runtime_mark_last_busy(info->dev); -		pm_runtime_put_autosuspend(info->dev); -	} -} - -static struct { -	unsigned int threshold; -	unsigned int factor_a; -	unsigned int factor_b; -} arizona_hpdet_b_ranges[] = { -	{ 100,  5528,   362464 }, -	{ 169, 11084,  6186851 }, -	{ 169, 11065, 65460395 }, -}; - -#define ARIZONA_HPDET_B_RANGE_MAX 0x3fb - -static struct { -	int min; -	int max; -} arizona_hpdet_c_ranges[] = { -	{ 0,       30 }, -	{ 8,      100 }, -	{ 100,   1000 }, -	{ 1000, 10000 }, -}; - -static int arizona_hpdet_read(struct arizona_extcon_info *info) -{ -	struct arizona *arizona = info->arizona; -	unsigned int val, range; -	int ret; - -	ret = regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_2, &val); -	if (ret != 0) { -		dev_err(arizona->dev, "Failed to read HPDET status: %d\n", -			ret); -		return ret; -	} - -	switch (info->hpdet_ip_version) { -	case 0: -		if (!(val & ARIZONA_HP_DONE)) { -			dev_err(arizona->dev, "HPDET did not complete: %x\n", -				val); -			return -EAGAIN; -		} - -		val &= ARIZONA_HP_LVL_MASK; -		break; - -	case 1: -		if (!(val & ARIZONA_HP_DONE_B)) { -			dev_err(arizona->dev, "HPDET did not complete: %x\n", -				val); -			return -EAGAIN; -		} - -		ret = regmap_read(arizona->regmap, ARIZONA_HP_DACVAL, &val); -		if (ret != 0) { -			dev_err(arizona->dev, "Failed to read HP value: %d\n", -				ret); -			return -EAGAIN; -		} - -		regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, -			    &range); -		range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK) -			   >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT; - -		if (range < ARRAY_SIZE(arizona_hpdet_b_ranges) - 1 && -		    (val < arizona_hpdet_b_ranges[range].threshold || -		     val >= ARIZONA_HPDET_B_RANGE_MAX)) { -			range++; -			dev_dbg(arizona->dev, "Moving to HPDET range %d\n", -				range); -			regmap_update_bits(arizona->regmap, -					   ARIZONA_HEADPHONE_DETECT_1, -					   ARIZONA_HP_IMPEDANCE_RANGE_MASK, -					   range << -					   ARIZONA_HP_IMPEDANCE_RANGE_SHIFT); -			return -EAGAIN; -		} - -		/* If we go out of range report top of range */ -		if (val < arizona_hpdet_b_ranges[range].threshold || -		    val >= ARIZONA_HPDET_B_RANGE_MAX) { -			dev_dbg(arizona->dev, "Measurement out of range\n"); -			return ARIZONA_HPDET_MAX; -		} - -		dev_dbg(arizona->dev, "HPDET read %d in range %d\n", -			val, range); - -		val = arizona_hpdet_b_ranges[range].factor_b -			/ ((val * 100) - -			   arizona_hpdet_b_ranges[range].factor_a); -		break; - -	case 2: -		if (!(val & ARIZONA_HP_DONE_B)) { -			dev_err(arizona->dev, "HPDET did not complete: %x\n", -				val); -			return -EAGAIN; -		} - -		val &= ARIZONA_HP_LVL_B_MASK; -		/* Convert to ohms, the value is in 0.5 ohm increments */ -		val /= 2; - -		regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, -			    &range); -		range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK) -			   >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT; - -		/* Skip up a range, or report? */ -		if (range < ARRAY_SIZE(arizona_hpdet_c_ranges) - 1 && -		    (val >= arizona_hpdet_c_ranges[range].max)) { -			range++; -			dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n", -				arizona_hpdet_c_ranges[range].min, -				arizona_hpdet_c_ranges[range].max); -			regmap_update_bits(arizona->regmap, -					   ARIZONA_HEADPHONE_DETECT_1, -					   ARIZONA_HP_IMPEDANCE_RANGE_MASK, -					   range << -					   ARIZONA_HP_IMPEDANCE_RANGE_SHIFT); -			return -EAGAIN; -		} - -		if (range && (val < arizona_hpdet_c_ranges[range].min)) { -			dev_dbg(arizona->dev, "Reporting range boundary %d\n", -				arizona_hpdet_c_ranges[range].min); -			val = arizona_hpdet_c_ranges[range].min; -		} -		break; - -	default: -		dev_warn(arizona->dev, "Unknown HPDET IP revision %d\n", -			 info->hpdet_ip_version); -		return -EINVAL; -	} - -	dev_dbg(arizona->dev, "HP impedance %d ohms\n", val); -	return val; -} - -static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading, -			       bool *mic) -{ -	struct arizona *arizona = info->arizona; -	int id_gpio = arizona->pdata.hpdet_id_gpio; - -	if (!arizona->pdata.hpdet_acc_id) -		return 0; - -	/* -	 * If we're using HPDET for accessory identification we need -	 * to take multiple measurements, step through them in sequence. -	 */ -	info->hpdet_res[info->num_hpdet_res++] = *reading; - -	/* Only check the mic directly if we didn't already ID it */ -	if (id_gpio && info->num_hpdet_res == 1) { -		dev_dbg(arizona->dev, "Measuring mic\n"); - -		regmap_update_bits(arizona->regmap, -				   ARIZONA_ACCESSORY_DETECT_MODE_1, -				   ARIZONA_ACCDET_MODE_MASK | -				   ARIZONA_ACCDET_SRC, -				   ARIZONA_ACCDET_MODE_HPR | -				   info->micd_modes[0].src); - -		gpio_set_value_cansleep(id_gpio, 1); - -		regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, -				   ARIZONA_HP_POLL, ARIZONA_HP_POLL); -		return -EAGAIN; -	} - -	/* OK, got both.  Now, compare... */ -	dev_dbg(arizona->dev, "HPDET measured %d %d\n", -		info->hpdet_res[0], info->hpdet_res[1]); - -	/* Take the headphone impedance for the main report */ -	*reading = info->hpdet_res[0]; - -	/* Sometimes we get false readings due to slow insert */ -	if (*reading >= ARIZONA_HPDET_MAX && !info->hpdet_retried) { -		dev_dbg(arizona->dev, "Retrying high impedance\n"); -		info->num_hpdet_res = 0; -		info->hpdet_retried = true; -		arizona_start_hpdet_acc_id(info); -		pm_runtime_put(info->dev); -		return -EAGAIN; -	} - -	/* -	 * If we measure the mic as high impedance -	 */ -	if (!id_gpio || info->hpdet_res[1] > 50) { -		dev_dbg(arizona->dev, "Detected mic\n"); -		*mic = true; -		info->detecting = true; -	} else { -		dev_dbg(arizona->dev, "Detected headphone\n"); -	} - -	/* Make sure everything is reset back to the real polarity */ -	regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1, -			   ARIZONA_ACCDET_SRC, info->micd_modes[0].src); - -	return 0; -} - -static irqreturn_t arizona_hpdet_irq(int irq, void *data) -{ -	struct arizona_extcon_info *info = data; -	struct arizona *arizona = info->arizona; -	int id_gpio = arizona->pdata.hpdet_id_gpio; -	unsigned int report = EXTCON_JACK_HEADPHONE; -	int ret, reading, state; -	bool mic = false; - -	mutex_lock(&info->lock); - -	/* If we got a spurious IRQ for some reason then ignore it */ -	if (!info->hpdet_active) { -		dev_warn(arizona->dev, "Spurious HPDET IRQ\n"); -		mutex_unlock(&info->lock); -		return IRQ_NONE; -	} - -	/* If the cable was removed while measuring ignore the result */ -	state = extcon_get_state(info->edev, EXTCON_MECHANICAL); -	if (state < 0) { -		dev_err(arizona->dev, "Failed to check cable state: %d\n", state); -		goto out; -	} else if (!state) { -		dev_dbg(arizona->dev, "Ignoring HPDET for removed cable\n"); -		goto done; -	} - -	ret = arizona_hpdet_read(info); -	if (ret == -EAGAIN) -		goto out; -	else if (ret < 0) -		goto done; -	reading = ret; - -	/* Reset back to starting range */ -	regmap_update_bits(arizona->regmap, -			   ARIZONA_HEADPHONE_DETECT_1, -			   ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL, -			   0); - -	ret = arizona_hpdet_do_id(info, &reading, &mic); -	if (ret == -EAGAIN) -		goto out; -	else if (ret < 0) -		goto done; - -	/* Report high impedence cables as line outputs */ -	if (reading >= 5000) -		report = EXTCON_JACK_LINE_OUT; -	else -		report = EXTCON_JACK_HEADPHONE; - -	ret = extcon_set_state_sync(info->edev, report, true); -	if (ret != 0) -		dev_err(arizona->dev, "Failed to report HP/line: %d\n", -			ret); - -done: -	/* Reset back to starting range */ -	regmap_update_bits(arizona->regmap, -			   ARIZONA_HEADPHONE_DETECT_1, -			   ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL, -			   0); - -	arizona_extcon_hp_clamp(info, false); - -	if (id_gpio) -		gpio_set_value_cansleep(id_gpio, 0); - -	/* If we have a mic then reenable MICDET */ -	if (state && (mic || info->mic)) -		arizona_start_mic(info); - -	if (info->hpdet_active) { -		pm_runtime_put_autosuspend(info->dev); -		info->hpdet_active = false; -	} - -	/* Do not set hp_det done when the cable has been unplugged */ -	if (state) -		info->hpdet_done = true; - -out: -	mutex_unlock(&info->lock); - -	return IRQ_HANDLED; -} - -static void arizona_identify_headphone(struct arizona_extcon_info *info) -{ -	struct arizona *arizona = info->arizona; -	int ret; - -	if (info->hpdet_done) -		return; - -	dev_dbg(arizona->dev, "Starting HPDET\n"); - -	/* Make sure we keep the device enabled during the measurement */ -	pm_runtime_get_sync(info->dev); - -	info->hpdet_active = true; - -	arizona_stop_mic(info); - -	arizona_extcon_hp_clamp(info, true); - -	ret = regmap_update_bits(arizona->regmap, -				 ARIZONA_ACCESSORY_DETECT_MODE_1, -				 ARIZONA_ACCDET_MODE_MASK, -				 arizona->pdata.hpdet_channel); -	if (ret != 0) { -		dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret); -		goto err; -	} - -	ret = regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, -				 ARIZONA_HP_POLL, ARIZONA_HP_POLL); -	if (ret != 0) { -		dev_err(arizona->dev, "Can't start HPDETL measurement: %d\n", -			ret); -		goto err; -	} - -	return; - -err: -	arizona_extcon_hp_clamp(info, false); -	pm_runtime_put_autosuspend(info->dev); - -	/* Just report headphone */ -	ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true); -	if (ret != 0) -		dev_err(arizona->dev, "Failed to report headphone: %d\n", ret); - -	if (info->mic) -		arizona_start_mic(info); - -	info->hpdet_active = false; -} - -static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info) -{ -	struct arizona *arizona = info->arizona; -	int hp_reading = 32; -	bool mic; -	int ret; - -	dev_dbg(arizona->dev, "Starting identification via HPDET\n"); - -	/* Make sure we keep the device enabled during the measurement */ -	pm_runtime_get_sync(info->dev); - -	info->hpdet_active = true; - -	arizona_extcon_hp_clamp(info, true); - -	ret = regmap_update_bits(arizona->regmap, -				 ARIZONA_ACCESSORY_DETECT_MODE_1, -				 ARIZONA_ACCDET_SRC | ARIZONA_ACCDET_MODE_MASK, -				 info->micd_modes[0].src | -				 arizona->pdata.hpdet_channel); -	if (ret != 0) { -		dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret); -		goto err; -	} - -	if (arizona->pdata.hpdet_acc_id_line) { -		ret = regmap_update_bits(arizona->regmap, -					 ARIZONA_HEADPHONE_DETECT_1, -					 ARIZONA_HP_POLL, ARIZONA_HP_POLL); -		if (ret != 0) { -			dev_err(arizona->dev, -				"Can't start HPDETL measurement: %d\n", -				ret); -			goto err; -		} -	} else { -		arizona_hpdet_do_id(info, &hp_reading, &mic); -	} - -	return; - -err: -	/* Just report headphone */ -	ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true); -	if (ret != 0) -		dev_err(arizona->dev, "Failed to report headphone: %d\n", ret); - -	info->hpdet_active = false; -} - -static void arizona_micd_timeout_work(struct work_struct *work) -{ -	struct arizona_extcon_info *info = container_of(work, -						struct arizona_extcon_info, -						micd_timeout_work.work); - -	mutex_lock(&info->lock); - -	dev_dbg(info->arizona->dev, "MICD timed out, reporting HP\n"); - -	info->detecting = false; - -	arizona_identify_headphone(info); - -	mutex_unlock(&info->lock); -} - -static int arizona_micd_adc_read(struct arizona_extcon_info *info) -{ -	struct arizona *arizona = info->arizona; -	unsigned int val; -	int ret; - -	/* Must disable MICD before we read the ADCVAL */ -	regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, -			   ARIZONA_MICD_ENA, 0); - -	ret = regmap_read(arizona->regmap, ARIZONA_MIC_DETECT_4, &val); -	if (ret != 0) { -		dev_err(arizona->dev, -			"Failed to read MICDET_ADCVAL: %d\n", ret); -		return ret; -	} - -	dev_dbg(arizona->dev, "MICDET_ADCVAL: %x\n", val); - -	val &= ARIZONA_MICDET_ADCVAL_MASK; -	if (val < ARRAY_SIZE(arizona_micd_levels)) -		val = arizona_micd_levels[val]; -	else -		val = INT_MAX; - -	if (val <= QUICK_HEADPHONE_MAX_OHM) -		val = ARIZONA_MICD_STS | ARIZONA_MICD_LVL_0; -	else if (val <= MICROPHONE_MIN_OHM) -		val = ARIZONA_MICD_STS | ARIZONA_MICD_LVL_1; -	else if (val <= MICROPHONE_MAX_OHM) -		val = ARIZONA_MICD_STS | ARIZONA_MICD_LVL_8; -	else -		val = ARIZONA_MICD_LVL_8; - -	return val; -} - -static int arizona_micd_read(struct arizona_extcon_info *info) -{ -	struct arizona *arizona = info->arizona; -	unsigned int val = 0; -	int ret, i; - -	for (i = 0; i < 10 && !(val & MICD_LVL_0_TO_8); i++) { -		ret = regmap_read(arizona->regmap, ARIZONA_MIC_DETECT_3, &val); -		if (ret != 0) { -			dev_err(arizona->dev, -				"Failed to read MICDET: %d\n", ret); -			return ret; -		} - -		dev_dbg(arizona->dev, "MICDET: %x\n", val); - -		if (!(val & ARIZONA_MICD_VALID)) { -			dev_warn(arizona->dev, -				 "Microphone detection state invalid\n"); -			return -EINVAL; -		} -	} - -	if (i == 10 && !(val & MICD_LVL_0_TO_8)) { -		dev_err(arizona->dev, "Failed to get valid MICDET value\n"); -		return -EINVAL; -	} - -	return val; -} - -static int arizona_micdet_reading(void *priv) -{ -	struct arizona_extcon_info *info = priv; -	struct arizona *arizona = info->arizona; -	int ret, val; - -	if (info->detecting && arizona->pdata.micd_software_compare) -		ret = arizona_micd_adc_read(info); -	else -		ret = arizona_micd_read(info); -	if (ret < 0) -		return ret; - -	val = ret; - -	/* Due to jack detect this should never happen */ -	if (!(val & ARIZONA_MICD_STS)) { -		dev_warn(arizona->dev, "Detected open circuit\n"); -		info->mic = false; -		info->detecting = false; -		arizona_identify_headphone(info); -		return 0; -	} - -	/* If we got a high impedence we should have a headset, report it. */ -	if (val & ARIZONA_MICD_LVL_8) { -		info->mic = true; -		info->detecting = false; - -		arizona_identify_headphone(info); - -		ret = extcon_set_state_sync(info->edev, -					      EXTCON_JACK_MICROPHONE, true); -		if (ret != 0) -			dev_err(arizona->dev, "Headset report failed: %d\n", -				ret); - -		/* Don't need to regulate for button detection */ -		ret = regulator_allow_bypass(info->micvdd, true); -		if (ret != 0) { -			dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n", -				ret); -		} - -		return 0; -	} - -	/* If we detected a lower impedence during initial startup -	 * then we probably have the wrong polarity, flip it.  Don't -	 * do this for the lowest impedences to speed up detection of -	 * plain headphones.  If both polarities report a low -	 * impedence then give up and report headphones. -	 */ -	if (val & MICD_LVL_1_TO_7) { -		if (info->jack_flips >= info->micd_num_modes * 10) { -			dev_dbg(arizona->dev, "Detected HP/line\n"); - -			info->detecting = false; - -			arizona_identify_headphone(info); -		} else { -			info->micd_mode++; -			if (info->micd_mode == info->micd_num_modes) -				info->micd_mode = 0; -			arizona_extcon_set_mode(info, info->micd_mode); - -			info->jack_flips++; - -			if (arizona->pdata.micd_software_compare) -				regmap_update_bits(arizona->regmap, -						   ARIZONA_MIC_DETECT_1, -						   ARIZONA_MICD_ENA, -						   ARIZONA_MICD_ENA); - -			queue_delayed_work(system_power_efficient_wq, -					   &info->micd_timeout_work, -					   msecs_to_jiffies(arizona->pdata.micd_timeout)); -		} - -		return 0; -	} - -	/* -	 * If we're still detecting and we detect a short then we've -	 * got a headphone. -	 */ -	dev_dbg(arizona->dev, "Headphone detected\n"); -	info->detecting = false; - -	arizona_identify_headphone(info); - -	return 0; -} - -static int arizona_button_reading(void *priv) -{ -	struct arizona_extcon_info *info = priv; -	struct arizona *arizona = info->arizona; -	int val, key, lvl, i; - -	val = arizona_micd_read(info); -	if (val < 0) -		return val; - -	/* -	 * If we're still detecting and we detect a short then we've -	 * got a headphone.  Otherwise it's a button press. -	 */ -	if (val & MICD_LVL_0_TO_7) { -		if (info->mic) { -			dev_dbg(arizona->dev, "Mic button detected\n"); - -			lvl = val & ARIZONA_MICD_LVL_MASK; -			lvl >>= ARIZONA_MICD_LVL_SHIFT; - -			for (i = 0; i < info->num_micd_ranges; i++) -				input_report_key(info->input, -						 info->micd_ranges[i].key, 0); - -			if (lvl && ffs(lvl) - 1 < info->num_micd_ranges) { -				key = info->micd_ranges[ffs(lvl) - 1].key; -				input_report_key(info->input, key, 1); -				input_sync(info->input); -			} else { -				dev_err(arizona->dev, "Button out of range\n"); -			} -		} else { -			dev_warn(arizona->dev, "Button with no mic: %x\n", -				 val); -		} -	} else { -		dev_dbg(arizona->dev, "Mic button released\n"); -		for (i = 0; i < info->num_micd_ranges; i++) -			input_report_key(info->input, -					 info->micd_ranges[i].key, 0); -		input_sync(info->input); -		arizona_extcon_pulse_micbias(info); -	} - -	return 0; -} - -static void arizona_micd_detect(struct work_struct *work) -{ -	struct arizona_extcon_info *info = container_of(work, -						struct arizona_extcon_info, -						micd_detect_work.work); -	struct arizona *arizona = info->arizona; -	int ret; - -	cancel_delayed_work_sync(&info->micd_timeout_work); - -	mutex_lock(&info->lock); - -	/* If the cable was removed while measuring ignore the result */ -	ret = extcon_get_state(info->edev, EXTCON_MECHANICAL); -	if (ret < 0) { -		dev_err(arizona->dev, "Failed to check cable state: %d\n", -				ret); -		mutex_unlock(&info->lock); -		return; -	} else if (!ret) { -		dev_dbg(arizona->dev, "Ignoring MICDET for removed cable\n"); -		mutex_unlock(&info->lock); -		return; -	} - -	if (info->detecting) -		arizona_micdet_reading(info); -	else -		arizona_button_reading(info); - -	pm_runtime_mark_last_busy(info->dev); -	mutex_unlock(&info->lock); -} - -static irqreturn_t arizona_micdet(int irq, void *data) -{ -	struct arizona_extcon_info *info = data; -	struct arizona *arizona = info->arizona; -	int debounce = arizona->pdata.micd_detect_debounce; - -	cancel_delayed_work_sync(&info->micd_detect_work); -	cancel_delayed_work_sync(&info->micd_timeout_work); - -	mutex_lock(&info->lock); -	if (!info->detecting) -		debounce = 0; -	mutex_unlock(&info->lock); - -	if (debounce) -		queue_delayed_work(system_power_efficient_wq, -				   &info->micd_detect_work, -				   msecs_to_jiffies(debounce)); -	else -		arizona_micd_detect(&info->micd_detect_work.work); - -	return IRQ_HANDLED; -} - -static void arizona_hpdet_work(struct work_struct *work) -{ -	struct arizona_extcon_info *info = container_of(work, -						struct arizona_extcon_info, -						hpdet_work.work); - -	mutex_lock(&info->lock); -	arizona_start_hpdet_acc_id(info); -	mutex_unlock(&info->lock); -} - -static int arizona_hpdet_wait(struct arizona_extcon_info *info) -{ -	struct arizona *arizona = info->arizona; -	unsigned int val; -	int i, ret; - -	for (i = 0; i < ARIZONA_HPDET_WAIT_COUNT; i++) { -		ret = regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_2, -				&val); -		if (ret) { -			dev_err(arizona->dev, -				"Failed to read HPDET state: %d\n", ret); -			return ret; -		} - -		switch (info->hpdet_ip_version) { -		case 0: -			if (val & ARIZONA_HP_DONE) -				return 0; -			break; -		default: -			if (val & ARIZONA_HP_DONE_B) -				return 0; -			break; -		} - -		msleep(ARIZONA_HPDET_WAIT_DELAY_MS); -	} - -	dev_warn(arizona->dev, "HPDET did not appear to complete\n"); - -	return -ETIMEDOUT; -} - -static irqreturn_t arizona_jackdet(int irq, void *data) -{ -	struct arizona_extcon_info *info = data; -	struct arizona *arizona = info->arizona; -	unsigned int val, present, mask; -	bool cancelled_hp, cancelled_mic; -	int ret, i; - -	cancelled_hp = cancel_delayed_work_sync(&info->hpdet_work); -	cancelled_mic = cancel_delayed_work_sync(&info->micd_timeout_work); - -	pm_runtime_get_sync(info->dev); - -	mutex_lock(&info->lock); - -	if (info->micd_clamp) { -		mask = ARIZONA_MICD_CLAMP_STS; -		present = 0; -	} else { -		mask = ARIZONA_JD1_STS; -		if (arizona->pdata.jd_invert) -			present = 0; -		else -			present = ARIZONA_JD1_STS; -	} - -	ret = regmap_read(arizona->regmap, ARIZONA_AOD_IRQ_RAW_STATUS, &val); -	if (ret != 0) { -		dev_err(arizona->dev, "Failed to read jackdet status: %d\n", -			ret); -		mutex_unlock(&info->lock); -		pm_runtime_put_autosuspend(info->dev); -		return IRQ_NONE; -	} - -	val &= mask; -	if (val == info->last_jackdet) { -		dev_dbg(arizona->dev, "Suppressing duplicate JACKDET\n"); -		if (cancelled_hp) -			queue_delayed_work(system_power_efficient_wq, -					   &info->hpdet_work, -					   msecs_to_jiffies(HPDET_DEBOUNCE)); - -		if (cancelled_mic) { -			int micd_timeout = arizona->pdata.micd_timeout; - -			queue_delayed_work(system_power_efficient_wq, -					   &info->micd_timeout_work, -					   msecs_to_jiffies(micd_timeout)); -		} - -		goto out; -	} -	info->last_jackdet = val; - -	if (info->last_jackdet == present) { -		dev_dbg(arizona->dev, "Detected jack\n"); -		ret = extcon_set_state_sync(info->edev, -					      EXTCON_MECHANICAL, true); - -		if (ret != 0) -			dev_err(arizona->dev, "Mechanical report failed: %d\n", -				ret); - -		info->detecting = true; -		info->mic = false; -		info->jack_flips = 0; - -		if (!arizona->pdata.hpdet_acc_id) { -			arizona_start_mic(info); -		} else { -			queue_delayed_work(system_power_efficient_wq, -					   &info->hpdet_work, -					   msecs_to_jiffies(HPDET_DEBOUNCE)); -		} - -		if (info->micd_clamp || !arizona->pdata.jd_invert) -			regmap_update_bits(arizona->regmap, -					   ARIZONA_JACK_DETECT_DEBOUNCE, -					   ARIZONA_MICD_CLAMP_DB | -					   ARIZONA_JD1_DB, 0); -	} else { -		dev_dbg(arizona->dev, "Detected jack removal\n"); - -		arizona_stop_mic(info); - -		info->num_hpdet_res = 0; -		for (i = 0; i < ARRAY_SIZE(info->hpdet_res); i++) -			info->hpdet_res[i] = 0; -		info->mic = false; -		info->hpdet_done = false; -		info->hpdet_retried = false; - -		for (i = 0; i < info->num_micd_ranges; i++) -			input_report_key(info->input, -					 info->micd_ranges[i].key, 0); -		input_sync(info->input); - -		for (i = 0; i < ARRAY_SIZE(arizona_cable) - 1; i++) { -			ret = extcon_set_state_sync(info->edev, -					arizona_cable[i], false); -			if (ret != 0) -				dev_err(arizona->dev, -					"Removal report failed: %d\n", ret); -		} - -		/* -		 * If the jack was removed during a headphone detection we -		 * need to wait for the headphone detection to finish, as -		 * it can not be aborted. We don't want to be able to start -		 * a new headphone detection from a fresh insert until this -		 * one is finished. -		 */ -		arizona_hpdet_wait(info); - -		regmap_update_bits(arizona->regmap, -				   ARIZONA_JACK_DETECT_DEBOUNCE, -				   ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB, -				   ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB); -	} - -out: -	/* Clear trig_sts to make sure DCVDD is not forced up */ -	regmap_write(arizona->regmap, ARIZONA_AOD_WKUP_AND_TRIG, -		     ARIZONA_MICD_CLAMP_FALL_TRIG_STS | -		     ARIZONA_MICD_CLAMP_RISE_TRIG_STS | -		     ARIZONA_JD1_FALL_TRIG_STS | -		     ARIZONA_JD1_RISE_TRIG_STS); - -	mutex_unlock(&info->lock); - -	pm_runtime_mark_last_busy(info->dev); -	pm_runtime_put_autosuspend(info->dev); - -	return IRQ_HANDLED; -} - -/* Map a level onto a slot in the register bank */ -static void arizona_micd_set_level(struct arizona *arizona, int index, -				   unsigned int level) -{ -	int reg; -	unsigned int mask; - -	reg = ARIZONA_MIC_DETECT_LEVEL_4 - (index / 2); - -	if (!(index % 2)) { -		mask = 0x3f00; -		level <<= 8; -	} else { -		mask = 0x3f; -	} - -	/* Program the level itself */ -	regmap_update_bits(arizona->regmap, reg, mask, level); -} - -static int arizona_extcon_get_micd_configs(struct device *dev, -					   struct arizona *arizona) -{ -	const char * const prop = "wlf,micd-configs"; -	const int entries_per_config = 3; -	struct arizona_micd_config *micd_configs; -	int nconfs, ret; -	int i, j; -	u32 *vals; - -	nconfs = device_property_count_u32(arizona->dev, prop); -	if (nconfs <= 0) -		return 0; - -	vals = kcalloc(nconfs, sizeof(u32), GFP_KERNEL); -	if (!vals) -		return -ENOMEM; - -	ret = device_property_read_u32_array(arizona->dev, prop, vals, nconfs); -	if (ret < 0) -		goto out; - -	nconfs /= entries_per_config; -	micd_configs = devm_kcalloc(dev, nconfs, sizeof(*micd_configs), -				    GFP_KERNEL); -	if (!micd_configs) { -		ret = -ENOMEM; -		goto out; -	} - -	for (i = 0, j = 0; i < nconfs; ++i) { -		micd_configs[i].src = vals[j++] ? ARIZONA_ACCDET_SRC : 0; -		micd_configs[i].bias = vals[j++]; -		micd_configs[i].gpio = vals[j++]; -	} - -	arizona->pdata.micd_configs = micd_configs; -	arizona->pdata.num_micd_configs = nconfs; - -out: -	kfree(vals); -	return ret; -} - -static int arizona_extcon_device_get_pdata(struct device *dev, -					   struct arizona *arizona) -{ -	struct arizona_pdata *pdata = &arizona->pdata; -	unsigned int val = ARIZONA_ACCDET_MODE_HPL; -	int ret; - -	device_property_read_u32(arizona->dev, "wlf,hpdet-channel", &val); -	switch (val) { -	case ARIZONA_ACCDET_MODE_HPL: -	case ARIZONA_ACCDET_MODE_HPR: -		pdata->hpdet_channel = val; -		break; -	default: -		dev_err(arizona->dev, -			"Wrong wlf,hpdet-channel DT value %d\n", val); -		pdata->hpdet_channel = ARIZONA_ACCDET_MODE_HPL; -	} - -	device_property_read_u32(arizona->dev, "wlf,micd-detect-debounce", -				 &pdata->micd_detect_debounce); - -	device_property_read_u32(arizona->dev, "wlf,micd-bias-start-time", -				 &pdata->micd_bias_start_time); - -	device_property_read_u32(arizona->dev, "wlf,micd-rate", -				 &pdata->micd_rate); - -	device_property_read_u32(arizona->dev, "wlf,micd-dbtime", -				 &pdata->micd_dbtime); - -	device_property_read_u32(arizona->dev, "wlf,micd-timeout-ms", -				 &pdata->micd_timeout); - -	pdata->micd_force_micbias = device_property_read_bool(arizona->dev, -						"wlf,micd-force-micbias"); - -	pdata->micd_software_compare = device_property_read_bool(arizona->dev, -						"wlf,micd-software-compare"); - -	pdata->jd_invert = device_property_read_bool(arizona->dev, -						     "wlf,jd-invert"); - -	device_property_read_u32(arizona->dev, "wlf,gpsw", &pdata->gpsw); - -	pdata->jd_gpio5 = device_property_read_bool(arizona->dev, -						    "wlf,use-jd2"); -	pdata->jd_gpio5_nopull = device_property_read_bool(arizona->dev, -						"wlf,use-jd2-nopull"); - -	ret = arizona_extcon_get_micd_configs(dev, arizona); -	if (ret < 0) -		dev_err(arizona->dev, "Failed to read micd configs: %d\n", ret); - -	return 0; -} - -static int arizona_extcon_probe(struct platform_device *pdev) -{ -	struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); -	struct arizona_pdata *pdata = &arizona->pdata; -	struct arizona_extcon_info *info; -	unsigned int val; -	unsigned int clamp_mode; -	int jack_irq_fall, jack_irq_rise; -	int ret, mode, i, j; - -	if (!arizona->dapm || !arizona->dapm->card) -		return -EPROBE_DEFER; - -	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); -	if (!info) -		return -ENOMEM; - -	if (!dev_get_platdata(arizona->dev)) -		arizona_extcon_device_get_pdata(&pdev->dev, arizona); - -	info->micvdd = devm_regulator_get(&pdev->dev, "MICVDD"); -	if (IS_ERR(info->micvdd)) { -		ret = PTR_ERR(info->micvdd); -		dev_err(arizona->dev, "Failed to get MICVDD: %d\n", ret); -		return ret; -	} - -	mutex_init(&info->lock); -	info->arizona = arizona; -	info->dev = &pdev->dev; -	info->last_jackdet = ~(ARIZONA_MICD_CLAMP_STS | ARIZONA_JD1_STS); -	INIT_DELAYED_WORK(&info->hpdet_work, arizona_hpdet_work); -	INIT_DELAYED_WORK(&info->micd_detect_work, arizona_micd_detect); -	INIT_DELAYED_WORK(&info->micd_timeout_work, arizona_micd_timeout_work); -	platform_set_drvdata(pdev, info); - -	switch (arizona->type) { -	case WM5102: -		switch (arizona->rev) { -		case 0: -			info->micd_reva = true; -			break; -		default: -			info->micd_clamp = true; -			info->hpdet_ip_version = 1; -			break; -		} -		break; -	case WM5110: -	case WM8280: -		switch (arizona->rev) { -		case 0 ... 2: -			break; -		default: -			info->micd_clamp = true; -			info->hpdet_ip_version = 2; -			break; -		} -		break; -	case WM8998: -	case WM1814: -		info->micd_clamp = true; -		info->hpdet_ip_version = 2; -		break; -	default: -		break; -	} - -	info->edev = devm_extcon_dev_allocate(&pdev->dev, arizona_cable); -	if (IS_ERR(info->edev)) { -		dev_err(&pdev->dev, "failed to allocate extcon device\n"); -		return -ENOMEM; -	} - -	ret = devm_extcon_dev_register(&pdev->dev, info->edev); -	if (ret < 0) { -		dev_err(arizona->dev, "extcon_dev_register() failed: %d\n", -			ret); -		return ret; -	} - -	info->input = devm_input_allocate_device(&pdev->dev); -	if (!info->input) { -		dev_err(arizona->dev, "Can't allocate input dev\n"); -		ret = -ENOMEM; -		return ret; -	} - -	info->input->name = "Headset"; -	info->input->phys = "arizona/extcon"; - -	if (!pdata->micd_timeout) -		pdata->micd_timeout = DEFAULT_MICD_TIMEOUT; - -	if (pdata->num_micd_configs) { -		info->micd_modes = pdata->micd_configs; -		info->micd_num_modes = pdata->num_micd_configs; -	} else { -		info->micd_modes = micd_default_modes; -		info->micd_num_modes = ARRAY_SIZE(micd_default_modes); -	} - -	if (arizona->pdata.gpsw > 0) -		regmap_update_bits(arizona->regmap, ARIZONA_GP_SWITCH_1, -				ARIZONA_SW1_MODE_MASK, arizona->pdata.gpsw); - -	if (pdata->micd_pol_gpio > 0) { -		if (info->micd_modes[0].gpio) -			mode = GPIOF_OUT_INIT_HIGH; -		else -			mode = GPIOF_OUT_INIT_LOW; - -		ret = devm_gpio_request_one(&pdev->dev, pdata->micd_pol_gpio, -					    mode, "MICD polarity"); -		if (ret != 0) { -			dev_err(arizona->dev, "Failed to request GPIO%d: %d\n", -				pdata->micd_pol_gpio, ret); -			return ret; -		} - -		info->micd_pol_gpio = gpio_to_desc(pdata->micd_pol_gpio); -	} else { -		if (info->micd_modes[0].gpio) -			mode = GPIOD_OUT_HIGH; -		else -			mode = GPIOD_OUT_LOW; - -		/* We can't use devm here because we need to do the get -		 * against the MFD device, as that is where the of_node -		 * will reside, but if we devm against that the GPIO -		 * will not be freed if the extcon driver is unloaded. -		 */ -		info->micd_pol_gpio = gpiod_get_optional(arizona->dev, -							 "wlf,micd-pol", -							 mode); -		if (IS_ERR(info->micd_pol_gpio)) { -			ret = PTR_ERR(info->micd_pol_gpio); -			dev_err(arizona->dev, -				"Failed to get microphone polarity GPIO: %d\n", -				ret); -			return ret; -		} -	} - -	if (arizona->pdata.hpdet_id_gpio > 0) { -		ret = devm_gpio_request_one(&pdev->dev, -					    arizona->pdata.hpdet_id_gpio, -					    GPIOF_OUT_INIT_LOW, -					    "HPDET"); -		if (ret != 0) { -			dev_err(arizona->dev, "Failed to request GPIO%d: %d\n", -				arizona->pdata.hpdet_id_gpio, ret); -			goto err_gpio; -		} -	} - -	if (arizona->pdata.micd_bias_start_time) -		regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, -				   ARIZONA_MICD_BIAS_STARTTIME_MASK, -				   arizona->pdata.micd_bias_start_time -				   << ARIZONA_MICD_BIAS_STARTTIME_SHIFT); - -	if (arizona->pdata.micd_rate) -		regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, -				   ARIZONA_MICD_RATE_MASK, -				   arizona->pdata.micd_rate -				   << ARIZONA_MICD_RATE_SHIFT); - -	switch (arizona->pdata.micd_dbtime) { -	case MICD_DBTIME_FOUR_READINGS: -		regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, -				   ARIZONA_MICD_DBTIME_MASK, -				   ARIZONA_MICD_DBTIME); -		break; -	case MICD_DBTIME_TWO_READINGS: -		regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, -				   ARIZONA_MICD_DBTIME_MASK, 0); -		break; -	default: -		break; -	} - -	BUILD_BUG_ON(ARRAY_SIZE(arizona_micd_levels) < -		     ARIZONA_NUM_MICD_BUTTON_LEVELS); - -	if (arizona->pdata.num_micd_ranges) { -		info->micd_ranges = pdata->micd_ranges; -		info->num_micd_ranges = pdata->num_micd_ranges; -	} else { -		info->micd_ranges = micd_default_ranges; -		info->num_micd_ranges = ARRAY_SIZE(micd_default_ranges); -	} - -	if (arizona->pdata.num_micd_ranges > ARIZONA_MAX_MICD_RANGE) { -		dev_err(arizona->dev, "Too many MICD ranges: %d\n", -			arizona->pdata.num_micd_ranges); -	} - -	if (info->num_micd_ranges > 1) { -		for (i = 1; i < info->num_micd_ranges; i++) { -			if (info->micd_ranges[i - 1].max > -			    info->micd_ranges[i].max) { -				dev_err(arizona->dev, -					"MICD ranges must be sorted\n"); -				ret = -EINVAL; -				goto err_gpio; -			} -		} -	} - -	/* Disable all buttons by default */ -	regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_2, -			   ARIZONA_MICD_LVL_SEL_MASK, 0x81); - -	/* Set up all the buttons the user specified */ -	for (i = 0; i < info->num_micd_ranges; i++) { -		for (j = 0; j < ARIZONA_NUM_MICD_BUTTON_LEVELS; j++) -			if (arizona_micd_levels[j] >= info->micd_ranges[i].max) -				break; - -		if (j == ARIZONA_NUM_MICD_BUTTON_LEVELS) { -			dev_err(arizona->dev, "Unsupported MICD level %d\n", -				info->micd_ranges[i].max); -			ret = -EINVAL; -			goto err_gpio; -		} - -		dev_dbg(arizona->dev, "%d ohms for MICD threshold %d\n", -			arizona_micd_levels[j], i); - -		arizona_micd_set_level(arizona, i, j); -		input_set_capability(info->input, EV_KEY, -				     info->micd_ranges[i].key); - -		/* Enable reporting of that range */ -		regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_2, -				   1 << i, 1 << i); -	} - -	/* Set all the remaining keys to a maximum */ -	for (; i < ARIZONA_MAX_MICD_RANGE; i++) -		arizona_micd_set_level(arizona, i, 0x3f); - -	/* -	 * If we have a clamp use it, activating in conjunction with -	 * GPIO5 if that is connected for jack detect operation. -	 */ -	if (info->micd_clamp) { -		if (arizona->pdata.jd_gpio5) { -			/* Put the GPIO into input mode with optional pull */ -			val = 0xc101; -			if (arizona->pdata.jd_gpio5_nopull) -				val &= ~ARIZONA_GPN_PU; - -			regmap_write(arizona->regmap, ARIZONA_GPIO5_CTRL, -				     val); - -			if (arizona->pdata.jd_invert) -				clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDH_GP5H; -			else -				clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDL_GP5H; -		} else { -			if (arizona->pdata.jd_invert) -				clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDH; -			else -				clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDL; -		} - -		regmap_update_bits(arizona->regmap, -				   ARIZONA_MICD_CLAMP_CONTROL, -				   ARIZONA_MICD_CLAMP_MODE_MASK, clamp_mode); - -		regmap_update_bits(arizona->regmap, -				   ARIZONA_JACK_DETECT_DEBOUNCE, -				   ARIZONA_MICD_CLAMP_DB, -				   ARIZONA_MICD_CLAMP_DB); -	} - -	arizona_extcon_set_mode(info, 0); - -	pm_runtime_enable(&pdev->dev); -	pm_runtime_idle(&pdev->dev); -	pm_runtime_get_sync(&pdev->dev); - -	if (info->micd_clamp) { -		jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE; -		jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL; -	} else { -		jack_irq_rise = ARIZONA_IRQ_JD_RISE; -		jack_irq_fall = ARIZONA_IRQ_JD_FALL; -	} - -	ret = arizona_request_irq(arizona, jack_irq_rise, -				  "JACKDET rise", arizona_jackdet, info); -	if (ret != 0) { -		dev_err(&pdev->dev, "Failed to get JACKDET rise IRQ: %d\n", -			ret); -		goto err_pm; -	} - -	ret = arizona_set_irq_wake(arizona, jack_irq_rise, 1); -	if (ret != 0) { -		dev_err(&pdev->dev, "Failed to set JD rise IRQ wake: %d\n", -			ret); -		goto err_rise; -	} - -	ret = arizona_request_irq(arizona, jack_irq_fall, -				  "JACKDET fall", arizona_jackdet, info); -	if (ret != 0) { -		dev_err(&pdev->dev, "Failed to get JD fall IRQ: %d\n", ret); -		goto err_rise_wake; -	} - -	ret = arizona_set_irq_wake(arizona, jack_irq_fall, 1); -	if (ret != 0) { -		dev_err(&pdev->dev, "Failed to set JD fall IRQ wake: %d\n", -			ret); -		goto err_fall; -	} - -	ret = arizona_request_irq(arizona, ARIZONA_IRQ_MICDET, -				  "MICDET", arizona_micdet, info); -	if (ret != 0) { -		dev_err(&pdev->dev, "Failed to get MICDET IRQ: %d\n", ret); -		goto err_fall_wake; -	} - -	ret = arizona_request_irq(arizona, ARIZONA_IRQ_HPDET, -				  "HPDET", arizona_hpdet_irq, info); -	if (ret != 0) { -		dev_err(&pdev->dev, "Failed to get HPDET IRQ: %d\n", ret); -		goto err_micdet; -	} - -	arizona_clk32k_enable(arizona); -	regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_DEBOUNCE, -			   ARIZONA_JD1_DB, ARIZONA_JD1_DB); -	regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, -			   ARIZONA_JD1_ENA, ARIZONA_JD1_ENA); - -	ret = regulator_allow_bypass(info->micvdd, true); -	if (ret != 0) -		dev_warn(arizona->dev, "Failed to set MICVDD to bypass: %d\n", -			 ret); - -	ret = input_register_device(info->input); -	if (ret) { -		dev_err(&pdev->dev, "Can't register input device: %d\n", ret); -		goto err_hpdet; -	} - -	pm_runtime_put(&pdev->dev); - -	return 0; - -err_hpdet: -	arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info); -err_micdet: -	arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info); -err_fall_wake: -	arizona_set_irq_wake(arizona, jack_irq_fall, 0); -err_fall: -	arizona_free_irq(arizona, jack_irq_fall, info); -err_rise_wake: -	arizona_set_irq_wake(arizona, jack_irq_rise, 0); -err_rise: -	arizona_free_irq(arizona, jack_irq_rise, info); -err_pm: -	pm_runtime_put(&pdev->dev); -	pm_runtime_disable(&pdev->dev); -err_gpio: -	gpiod_put(info->micd_pol_gpio); -	return ret; -} - -static int arizona_extcon_remove(struct platform_device *pdev) -{ -	struct arizona_extcon_info *info = platform_get_drvdata(pdev); -	struct arizona *arizona = info->arizona; -	int jack_irq_rise, jack_irq_fall; -	bool change; -	int ret; - -	if (info->micd_clamp) { -		jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE; -		jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL; -	} else { -		jack_irq_rise = ARIZONA_IRQ_JD_RISE; -		jack_irq_fall = ARIZONA_IRQ_JD_FALL; -	} - -	arizona_set_irq_wake(arizona, jack_irq_rise, 0); -	arizona_set_irq_wake(arizona, jack_irq_fall, 0); -	arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info); -	arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info); -	arizona_free_irq(arizona, jack_irq_rise, info); -	arizona_free_irq(arizona, jack_irq_fall, info); -	cancel_delayed_work_sync(&info->hpdet_work); -	cancel_delayed_work_sync(&info->micd_detect_work); -	cancel_delayed_work_sync(&info->micd_timeout_work); - -	ret = regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1, -				       ARIZONA_MICD_ENA, 0, -				       &change); -	if (ret < 0) { -		dev_err(&pdev->dev, "Failed to disable micd on remove: %d\n", -			ret); -	} else if (change) { -		regulator_disable(info->micvdd); -		pm_runtime_put(info->dev); -	} - -	regmap_update_bits(arizona->regmap, -			   ARIZONA_MICD_CLAMP_CONTROL, -			   ARIZONA_MICD_CLAMP_MODE_MASK, 0); -	regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, -			   ARIZONA_JD1_ENA, 0); -	arizona_clk32k_disable(arizona); - -	gpiod_put(info->micd_pol_gpio); - -	pm_runtime_disable(&pdev->dev); - -	return 0; -} - -static struct platform_driver arizona_extcon_driver = { -	.driver		= { -		.name	= "arizona-extcon", -	}, -	.probe		= arizona_extcon_probe, -	.remove		= arizona_extcon_remove, -}; - -module_platform_driver(arizona_extcon_driver); - -MODULE_DESCRIPTION("Arizona Extcon driver"); -MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:extcon-arizona");  |