diff options
Diffstat (limited to 'drivers/edac/amd64_edac.c')
| -rw-r--r-- | drivers/edac/amd64_edac.c | 118 |
1 files changed, 0 insertions, 118 deletions
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index e8d84f89dbcf..a44e90abb755 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -1979,107 +1979,6 @@ static int get_channel_from_ecc_syndrome(struct mem_ctl_info *mci, u16 syndrome) } /* - * Check for valid error in the NB Status High register. If so, proceed to read - * NB Status Low, NB Address Low and NB Address High registers and store data - * into error structure. - * - * Returns: - * - 1: if hardware regs contains valid error info - * - 0: if no valid error is indicated - */ -static int amd64_get_error_info_regs(struct mem_ctl_info *mci, - struct err_regs *regs) -{ - struct amd64_pvt *pvt; - struct pci_dev *misc_f3_ctl; - - pvt = mci->pvt_info; - misc_f3_ctl = pvt->misc_f3_ctl; - - if (amd64_read_pci_cfg(misc_f3_ctl, K8_NBSH, ®s->nbsh)) - return 0; - - if (!(regs->nbsh & K8_NBSH_VALID_BIT)) - return 0; - - /* valid error, read remaining error information registers */ - if (amd64_read_pci_cfg(misc_f3_ctl, K8_NBSL, ®s->nbsl) || - amd64_read_pci_cfg(misc_f3_ctl, K8_NBEAL, ®s->nbeal) || - amd64_read_pci_cfg(misc_f3_ctl, K8_NBEAH, ®s->nbeah) || - amd64_read_pci_cfg(misc_f3_ctl, K8_NBCFG, ®s->nbcfg)) - return 0; - - return 1; -} - -/* - * This function is called to retrieve the error data from hardware and store it - * in the info structure. - * - * Returns: - * - 1: if a valid error is found - * - 0: if no error is found - */ -static int amd64_get_error_info(struct mem_ctl_info *mci, - struct err_regs *info) -{ - struct amd64_pvt *pvt; - struct err_regs regs; - - pvt = mci->pvt_info; - - if (!amd64_get_error_info_regs(mci, info)) - return 0; - - /* - * Here's the problem with the K8's EDAC reporting: There are four - * registers which report pieces of error information. They are shared - * between CEs and UEs. Furthermore, contrary to what is stated in the - * BKDG, the overflow bit is never used! Every error always updates the - * reporting registers. - * - * Can you see the race condition? All four error reporting registers - * must be read before a new error updates them! There is no way to read - * all four registers atomically. The best than can be done is to detect - * that a race has occured and then report the error without any kind of - * precision. - * - * What is still positive is that errors are still reported and thus - * problems can still be detected - just not localized because the - * syndrome and address are spread out across registers. - * - * Grrrrr!!!!! Here's hoping that AMD fixes this in some future K8 rev. - * UEs and CEs should have separate register sets with proper overflow - * bits that are used! At very least the problem can be fixed by - * honoring the ErrValid bit in 'nbsh' and not updating registers - just - * set the overflow bit - unless the current error is CE and the new - * error is UE which would be the only situation for overwriting the - * current values. - */ - - regs = *info; - - /* Use info from the second read - most current */ - if (unlikely(!amd64_get_error_info_regs(mci, info))) - return 0; - - /* clear the error bits in hardware */ - pci_write_bits32(pvt->misc_f3_ctl, K8_NBSH, 0, K8_NBSH_VALID_BIT); - - /* Check for the possible race condition */ - if ((regs.nbsh != info->nbsh) || - (regs.nbsl != info->nbsl) || - (regs.nbeah != info->nbeah) || - (regs.nbeal != info->nbeal)) { - amd64_mc_printk(mci, KERN_WARNING, - "hardware STATUS read access race condition " - "detected!\n"); - return 0; - } - return 1; -} - -/* * Handle any Correctable Errors (CEs) that have occurred. Check for valid ERROR * ADDRESS and process. */ @@ -2203,20 +2102,6 @@ void amd64_decode_bus_error(int node_id, struct err_regs *regs) } /* - * The main polling 'check' function, called FROM the edac core to perform the - * error checking and if an error is encountered, error processing. - */ -static void amd64_check(struct mem_ctl_info *mci) -{ - struct err_regs regs; - - if (amd64_get_error_info(mci, ®s)) { - struct amd64_pvt *pvt = mci->pvt_info; - amd_decode_nb_mce(pvt->mc_node_id, ®s, 1); - } -} - -/* * Input: * 1) struct amd64_pvt which contains pvt->dram_f2_ctl pointer * 2) AMD Family index value @@ -2756,9 +2641,6 @@ static void amd64_setup_mci_misc_attributes(struct mem_ctl_info *mci) mci->dev_name = pci_name(pvt->dram_f2_ctl); mci->ctl_page_to_phys = NULL; - /* IMPORTANT: Set the polling 'check' function in this module */ - mci->edac_check = amd64_check; - /* memory scrubber interface */ mci->set_sdram_scrub_rate = amd64_set_scrub_rate; mci->get_sdram_scrub_rate = amd64_get_scrub_rate; |