diff options
Diffstat (limited to 'drivers/cxl/cxlmem.h')
| -rw-r--r-- | drivers/cxl/cxlmem.h | 202 |
1 files changed, 179 insertions, 23 deletions
diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h index 6c0b1e2ea97c..c4f450ad434d 100644 --- a/drivers/cxl/cxlmem.h +++ b/drivers/cxl/cxlmem.h @@ -2,6 +2,7 @@ /* Copyright(c) 2020-2021 Intel Corporation. */ #ifndef __CXL_MEM_H__ #define __CXL_MEM_H__ +#include <uapi/linux/cxl_mem.h> #include <linux/cdev.h> #include "cxl.h" @@ -29,21 +30,6 @@ CXLMDEV_RESET_NEEDED_NOT) /** - * struct cdevm_file_operations - devm coordinated cdev file operations - * @fops: file operations that are synchronized against @shutdown - * @shutdown: disconnect driver data - * - * @shutdown is invoked in the devres release path to disconnect any - * driver instance data from @dev. It assumes synchronization with any - * fops operation that requires driver data. After @shutdown an - * operation may only reference @device data. - */ -struct cdevm_file_operations { - struct file_operations fops; - void (*shutdown)(struct device *dev); -}; - -/** * struct cxl_memdev - CXL bus object representing a Type-3 Memory Device * @dev: driver core device object * @cdev: char dev core object for ioctl operations @@ -62,13 +48,50 @@ static inline struct cxl_memdev *to_cxl_memdev(struct device *dev) return container_of(dev, struct cxl_memdev, dev); } -struct cxl_memdev * -devm_cxl_add_memdev(struct device *host, struct cxl_mem *cxlm, - const struct cdevm_file_operations *cdevm_fops); +struct cxl_memdev *devm_cxl_add_memdev(struct cxl_mem *cxlm); + +/** + * struct cxl_mbox_cmd - A command to be submitted to hardware. + * @opcode: (input) The command set and command submitted to hardware. + * @payload_in: (input) Pointer to the input payload. + * @payload_out: (output) Pointer to the output payload. Must be allocated by + * the caller. + * @size_in: (input) Number of bytes to load from @payload_in. + * @size_out: (input) Max number of bytes loaded into @payload_out. + * (output) Number of bytes generated by the device. For fixed size + * outputs commands this is always expected to be deterministic. For + * variable sized output commands, it tells the exact number of bytes + * written. + * @return_code: (output) Error code returned from hardware. + * + * This is the primary mechanism used to send commands to the hardware. + * All the fields except @payload_* correspond exactly to the fields described in + * Command Register section of the CXL 2.0 8.2.8.4.5. @payload_in and + * @payload_out are written to, and read from the Command Payload Registers + * defined in CXL 2.0 8.2.8.4.8. + */ +struct cxl_mbox_cmd { + u16 opcode; + void *payload_in; + void *payload_out; + size_t size_in; + size_t size_out; + u16 return_code; +#define CXL_MBOX_SUCCESS 0 +}; + +/* + * CXL 2.0 - Memory capacity multiplier + * See Section 8.2.9.5 + * + * Volatile, Persistent, and Partition capacities are specified to be in + * multiples of 256MB - define a multiplier to convert to/from bytes. + */ +#define CXL_CAPACITY_MULTIPLIER SZ_256M /** * struct cxl_mem - A CXL memory device - * @pdev: The PCI device associated with this CXL device. + * @dev: The device associated with this CXL device. * @cxlmd: Logical memory device chardev / interface * @regs: Parsed register blocks * @payload_size: Size of space for payload @@ -78,11 +101,24 @@ devm_cxl_add_memdev(struct device *host, struct cxl_mem *cxlm, * @mbox_mutex: Mutex to synchronize mailbox access. * @firmware_version: Firmware version for the memory device. * @enabled_cmds: Hardware commands found enabled in CEL. - * @pmem_range: Persistent memory capacity information. - * @ram_range: Volatile memory capacity information. + * @exclusive_cmds: Commands that are kernel-internal only + * @pmem_range: Active Persistent memory capacity configuration + * @ram_range: Active Volatile memory capacity configuration + * @total_bytes: sum of all possible capacities + * @volatile_only_bytes: hard volatile capacity + * @persistent_only_bytes: hard persistent capacity + * @partition_align_bytes: alignment size for partition-able capacity + * @active_volatile_bytes: sum of hard + soft volatile + * @active_persistent_bytes: sum of hard + soft persistent + * @next_volatile_bytes: volatile capacity change pending device reset + * @next_persistent_bytes: persistent capacity change pending device reset + * @mbox_send: @dev specific transport for transmitting mailbox commands + * + * See section 8.2.9.5.2 Capacity Configuration and Label Storage for + * details on capacity parameters. */ struct cxl_mem { - struct pci_dev *pdev; + struct device *dev; struct cxl_memdev *cxlmd; struct cxl_regs regs; @@ -91,7 +127,8 @@ struct cxl_mem { size_t lsa_size; struct mutex mbox_mutex; /* Protects device mailbox and firmware */ char firmware_version[0x10]; - unsigned long *enabled_cmds; + DECLARE_BITMAP(enabled_cmds, CXL_MEM_COMMAND_ID_MAX); + DECLARE_BITMAP(exclusive_cmds, CXL_MEM_COMMAND_ID_MAX); struct range pmem_range; struct range ram_range; @@ -104,5 +141,124 @@ struct cxl_mem { u64 active_persistent_bytes; u64 next_volatile_bytes; u64 next_persistent_bytes; + + int (*mbox_send)(struct cxl_mem *cxlm, struct cxl_mbox_cmd *cmd); +}; + +enum cxl_opcode { + CXL_MBOX_OP_INVALID = 0x0000, + CXL_MBOX_OP_RAW = CXL_MBOX_OP_INVALID, + CXL_MBOX_OP_GET_FW_INFO = 0x0200, + CXL_MBOX_OP_ACTIVATE_FW = 0x0202, + CXL_MBOX_OP_GET_SUPPORTED_LOGS = 0x0400, + CXL_MBOX_OP_GET_LOG = 0x0401, + CXL_MBOX_OP_IDENTIFY = 0x4000, + CXL_MBOX_OP_GET_PARTITION_INFO = 0x4100, + CXL_MBOX_OP_SET_PARTITION_INFO = 0x4101, + CXL_MBOX_OP_GET_LSA = 0x4102, + CXL_MBOX_OP_SET_LSA = 0x4103, + CXL_MBOX_OP_GET_HEALTH_INFO = 0x4200, + CXL_MBOX_OP_GET_ALERT_CONFIG = 0x4201, + CXL_MBOX_OP_SET_ALERT_CONFIG = 0x4202, + CXL_MBOX_OP_GET_SHUTDOWN_STATE = 0x4203, + CXL_MBOX_OP_SET_SHUTDOWN_STATE = 0x4204, + CXL_MBOX_OP_GET_POISON = 0x4300, + CXL_MBOX_OP_INJECT_POISON = 0x4301, + CXL_MBOX_OP_CLEAR_POISON = 0x4302, + CXL_MBOX_OP_GET_SCAN_MEDIA_CAPS = 0x4303, + CXL_MBOX_OP_SCAN_MEDIA = 0x4304, + CXL_MBOX_OP_GET_SCAN_MEDIA = 0x4305, + CXL_MBOX_OP_MAX = 0x10000 }; + +#define DEFINE_CXL_CEL_UUID \ + UUID_INIT(0xda9c0b5, 0xbf41, 0x4b78, 0x8f, 0x79, 0x96, 0xb1, 0x62, \ + 0x3b, 0x3f, 0x17) + +#define DEFINE_CXL_VENDOR_DEBUG_UUID \ + UUID_INIT(0xe1819d9, 0x11a9, 0x400c, 0x81, 0x1f, 0xd6, 0x07, 0x19, \ + 0x40, 0x3d, 0x86) + +struct cxl_mbox_get_supported_logs { + __le16 entries; + u8 rsvd[6]; + struct cxl_gsl_entry { + uuid_t uuid; + __le32 size; + } __packed entry[]; +} __packed; + +struct cxl_cel_entry { + __le16 opcode; + __le16 effect; +} __packed; + +struct cxl_mbox_get_log { + uuid_t uuid; + __le32 offset; + __le32 length; +} __packed; + +/* See CXL 2.0 Table 175 Identify Memory Device Output Payload */ +struct cxl_mbox_identify { + char fw_revision[0x10]; + __le64 total_capacity; + __le64 volatile_capacity; + __le64 persistent_capacity; + __le64 partition_align; + __le16 info_event_log_size; + __le16 warning_event_log_size; + __le16 failure_event_log_size; + __le16 fatal_event_log_size; + __le32 lsa_size; + u8 poison_list_max_mer[3]; + __le16 inject_poison_limit; + u8 poison_caps; + u8 qos_telemetry_caps; +} __packed; + +struct cxl_mbox_get_lsa { + u32 offset; + u32 length; +} __packed; + +struct cxl_mbox_set_lsa { + u32 offset; + u32 reserved; + u8 data[]; +} __packed; + +/** + * struct cxl_mem_command - Driver representation of a memory device command + * @info: Command information as it exists for the UAPI + * @opcode: The actual bits used for the mailbox protocol + * @flags: Set of flags effecting driver behavior. + * + * * %CXL_CMD_FLAG_FORCE_ENABLE: In cases of error, commands with this flag + * will be enabled by the driver regardless of what hardware may have + * advertised. + * + * The cxl_mem_command is the driver's internal representation of commands that + * are supported by the driver. Some of these commands may not be supported by + * the hardware. The driver will use @info to validate the fields passed in by + * the user then submit the @opcode to the hardware. + * + * See struct cxl_command_info. + */ +struct cxl_mem_command { + struct cxl_command_info info; + enum cxl_opcode opcode; + u32 flags; +#define CXL_CMD_FLAG_NONE 0 +#define CXL_CMD_FLAG_FORCE_ENABLE BIT(0) +}; + +int cxl_mem_mbox_send_cmd(struct cxl_mem *cxlm, u16 opcode, void *in, + size_t in_size, void *out, size_t out_size); +int cxl_mem_identify(struct cxl_mem *cxlm); +int cxl_mem_enumerate_cmds(struct cxl_mem *cxlm); +int cxl_mem_create_range_info(struct cxl_mem *cxlm); +struct cxl_mem *cxl_mem_create(struct device *dev); +void set_exclusive_cxl_commands(struct cxl_mem *cxlm, unsigned long *cmds); +void clear_exclusive_cxl_commands(struct cxl_mem *cxlm, unsigned long *cmds); #endif /* __CXL_MEM_H__ */ |