diff options
Diffstat (limited to 'drivers/cpufreq')
| -rw-r--r-- | drivers/cpufreq/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/cpufreq/Kconfig.arm | 2 | ||||
| -rw-r--r-- | drivers/cpufreq/Makefile | 2 | ||||
| -rw-r--r-- | drivers/cpufreq/cpufreq-dt.c (renamed from drivers/cpufreq/cpufreq-cpu0.c) | 38 | ||||
| -rw-r--r-- | drivers/cpufreq/exynos4210-cpufreq.c | 2 | ||||
| -rw-r--r-- | drivers/cpufreq/exynos4x12-cpufreq.c | 2 | ||||
| -rw-r--r-- | drivers/cpufreq/exynos5250-cpufreq.c | 2 | ||||
| -rw-r--r-- | drivers/cpufreq/highbank-cpufreq.c | 6 | ||||
| -rw-r--r-- | drivers/cpufreq/s5pv210-cpufreq.c | 2 |
9 files changed, 32 insertions, 32 deletions
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index ffe350f86bca..3489f8f5fada 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -183,14 +183,14 @@ config CPU_FREQ_GOV_CONSERVATIVE If in doubt, say N. -config GENERIC_CPUFREQ_CPU0 - tristate "Generic CPU0 cpufreq driver" +config CPUFREQ_DT + tristate "Generic DT based cpufreq driver" depends on HAVE_CLK && OF - # if CPU_THERMAL is on and THERMAL=m, CPU0 cannot be =y: + # if CPU_THERMAL is on and THERMAL=m, CPUFREQ_DT cannot be =y: depends on !CPU_THERMAL || THERMAL select PM_OPP help - This adds a generic cpufreq driver for CPU0 frequency management. + This adds a generic DT based cpufreq driver for frequency management. It supports both uniprocessor (UP) and symmetric multiprocessor (SMP) systems which share clock and voltage across all CPUs. diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 7364a538e056..48ed28b789f7 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -92,7 +92,7 @@ config ARM_EXYNOS_CPU_FREQ_BOOST_SW config ARM_HIGHBANK_CPUFREQ tristate "Calxeda Highbank-based" - depends on ARCH_HIGHBANK && GENERIC_CPUFREQ_CPU0 && REGULATOR + depends on ARCH_HIGHBANK && CPUFREQ_DT && REGULATOR default m help This adds the CPUFreq driver for Calxeda Highbank SoC diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index db6d9a2fea4d..40c53dc1937e 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -13,7 +13,7 @@ obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND) += cpufreq_ondemand.o obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o obj-$(CONFIG_CPU_FREQ_GOV_COMMON) += cpufreq_governor.o -obj-$(CONFIG_GENERIC_CPUFREQ_CPU0) += cpufreq-cpu0.o +obj-$(CONFIG_CPUFREQ_DT) += cpufreq-dt.o ################################################################################## # x86 drivers. diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-dt.c index a5f8c5f5f4f4..e00265066a75 100644 --- a/drivers/cpufreq/cpufreq-cpu0.c +++ b/drivers/cpufreq/cpufreq-dt.c @@ -4,7 +4,7 @@ * Copyright (C) 2014 Linaro. * Viresh Kumar <viresh.kumar@linaro.org> * - * The OPP code in function cpu0_set_target() is reused from + * The OPP code in function set_target() is reused from * drivers/cpufreq/omap-cpufreq.c * * This program is free software; you can redistribute it and/or modify @@ -35,7 +35,7 @@ struct private_data { unsigned int voltage_tolerance; /* in percentage */ }; -static int cpu0_set_target(struct cpufreq_policy *policy, unsigned int index) +static int set_target(struct cpufreq_policy *policy, unsigned int index) { struct dev_pm_opp *opp; struct cpufreq_frequency_table *freq_table = policy->freq_table; @@ -176,7 +176,7 @@ try_again: return ret; } -static int cpu0_cpufreq_init(struct cpufreq_policy *policy) +static int cpufreq_init(struct cpufreq_policy *policy) { struct cpufreq_frequency_table *freq_table; struct thermal_cooling_device *cdev; @@ -287,7 +287,7 @@ out_put_reg_clk: return ret; } -static int cpu0_cpufreq_exit(struct cpufreq_policy *policy) +static int cpufreq_exit(struct cpufreq_policy *policy) { struct private_data *priv = policy->driver_data; @@ -301,18 +301,18 @@ static int cpu0_cpufreq_exit(struct cpufreq_policy *policy) return 0; } -static struct cpufreq_driver cpu0_cpufreq_driver = { +static struct cpufreq_driver dt_cpufreq_driver = { .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, .verify = cpufreq_generic_frequency_table_verify, - .target_index = cpu0_set_target, + .target_index = set_target, .get = cpufreq_generic_get, - .init = cpu0_cpufreq_init, - .exit = cpu0_cpufreq_exit, - .name = "generic_cpu0", + .init = cpufreq_init, + .exit = cpufreq_exit, + .name = "cpufreq-dt", .attr = cpufreq_generic_attr, }; -static int cpu0_cpufreq_probe(struct platform_device *pdev) +static int dt_cpufreq_probe(struct platform_device *pdev) { struct device *cpu_dev; struct regulator *cpu_reg; @@ -334,30 +334,30 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev) if (!IS_ERR(cpu_reg)) regulator_put(cpu_reg); - ret = cpufreq_register_driver(&cpu0_cpufreq_driver); + ret = cpufreq_register_driver(&dt_cpufreq_driver); if (ret) dev_err(cpu_dev, "failed register driver: %d\n", ret); return ret; } -static int cpu0_cpufreq_remove(struct platform_device *pdev) +static int dt_cpufreq_remove(struct platform_device *pdev) { - cpufreq_unregister_driver(&cpu0_cpufreq_driver); + cpufreq_unregister_driver(&dt_cpufreq_driver); return 0; } -static struct platform_driver cpu0_cpufreq_platdrv = { +static struct platform_driver dt_cpufreq_platdrv = { .driver = { - .name = "cpufreq-cpu0", + .name = "cpufreq-dt", .owner = THIS_MODULE, }, - .probe = cpu0_cpufreq_probe, - .remove = cpu0_cpufreq_remove, + .probe = dt_cpufreq_probe, + .remove = dt_cpufreq_remove, }; -module_platform_driver(cpu0_cpufreq_platdrv); +module_platform_driver(dt_cpufreq_platdrv); MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>"); MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>"); -MODULE_DESCRIPTION("Generic CPU0 cpufreq driver"); +MODULE_DESCRIPTION("Generic cpufreq driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c index 61a54310a1b9..843ec824fd91 100644 --- a/drivers/cpufreq/exynos4210-cpufreq.c +++ b/drivers/cpufreq/exynos4210-cpufreq.c @@ -127,7 +127,7 @@ int exynos4210_cpufreq_init(struct exynos_dvfs_info *info) * dependencies on platform headers. It is necessary to enable * Exynos multi-platform support and will be removed together with * this whole driver as soon as Exynos gets migrated to use - * cpufreq-cpu0 driver. + * cpufreq-dt driver. */ np = of_find_compatible_node(NULL, NULL, "samsung,exynos4210-clock"); if (!np) { diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c index 351a2074cfea..9e78a850e29f 100644 --- a/drivers/cpufreq/exynos4x12-cpufreq.c +++ b/drivers/cpufreq/exynos4x12-cpufreq.c @@ -174,7 +174,7 @@ int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info) * dependencies on platform headers. It is necessary to enable * Exynos multi-platform support and will be removed together with * this whole driver as soon as Exynos gets migrated to use - * cpufreq-cpu0 driver. + * cpufreq-dt driver. */ np = of_find_compatible_node(NULL, NULL, "samsung,exynos4412-clock"); if (!np) { diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c index c91ce69dc631..3eafdc7ba787 100644 --- a/drivers/cpufreq/exynos5250-cpufreq.c +++ b/drivers/cpufreq/exynos5250-cpufreq.c @@ -153,7 +153,7 @@ int exynos5250_cpufreq_init(struct exynos_dvfs_info *info) * dependencies on platform headers. It is necessary to enable * Exynos multi-platform support and will be removed together with * this whole driver as soon as Exynos gets migrated to use - * cpufreq-cpu0 driver. + * cpufreq-dt driver. */ np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-clock"); if (!np) { diff --git a/drivers/cpufreq/highbank-cpufreq.c b/drivers/cpufreq/highbank-cpufreq.c index bf8902a0866d..ec399ad2f059 100644 --- a/drivers/cpufreq/highbank-cpufreq.c +++ b/drivers/cpufreq/highbank-cpufreq.c @@ -6,7 +6,7 @@ * published by the Free Software Foundation. * * This driver provides the clk notifier callbacks that are used when - * the cpufreq-cpu0 driver changes to frequency to alert the highbank + * the cpufreq-dt driver changes to frequency to alert the highbank * EnergyCore Management Engine (ECME) about the need to change * voltage. The ECME interfaces with the actual voltage regulators. */ @@ -60,7 +60,7 @@ static struct notifier_block hb_cpufreq_clk_nb = { static int hb_cpufreq_driver_init(void) { - struct platform_device_info devinfo = { .name = "cpufreq-cpu0", }; + struct platform_device_info devinfo = { .name = "cpufreq-dt", }; struct device *cpu_dev; struct clk *cpu_clk; struct device_node *np; @@ -95,7 +95,7 @@ static int hb_cpufreq_driver_init(void) goto out_put_node; } - /* Instantiate cpufreq-cpu0 */ + /* Instantiate cpufreq-dt */ platform_device_register_full(&devinfo); out_put_node: diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c index 3f9791f07b8e..567caa6313ff 100644 --- a/drivers/cpufreq/s5pv210-cpufreq.c +++ b/drivers/cpufreq/s5pv210-cpufreq.c @@ -597,7 +597,7 @@ static int s5pv210_cpufreq_probe(struct platform_device *pdev) * and dependencies on platform headers. It is necessary to enable * S5PV210 multi-platform support and will be removed together with * this whole driver as soon as S5PV210 gets migrated to use - * cpufreq-cpu0 driver. + * cpufreq-dt driver. */ np = of_find_compatible_node(NULL, NULL, "samsung,s5pv210-clock"); if (!np) { |