diff options
Diffstat (limited to 'drivers/clocksource')
-rw-r--r-- | drivers/clocksource/timer-fttmr010.c | 103 |
1 files changed, 22 insertions, 81 deletions
diff --git a/drivers/clocksource/timer-fttmr010.c b/drivers/clocksource/timer-fttmr010.c index 58ce017e4a65..db097db346e3 100644 --- a/drivers/clocksource/timer-fttmr010.c +++ b/drivers/clocksource/timer-fttmr010.c @@ -11,8 +11,6 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> -#include <linux/mfd/syscon.h> -#include <linux/regmap.h> #include <linux/clockchips.h> #include <linux/clocksource.h> #include <linux/sched_clock.h> @@ -179,9 +177,28 @@ static struct irqaction fttmr010_timer_irq = { .handler = fttmr010_timer_interrupt, }; -static int __init fttmr010_timer_common_init(struct device_node *np) +static int __init fttmr010_timer_init(struct device_node *np) { int irq; + struct clk *clk; + int ret; + + /* + * These implementations require a clock reference. + * FIXME: we currently only support clocking using PCLK + * and using EXTCLK is not supported in the driver. + */ + clk = of_clk_get_by_name(np, "PCLK"); + if (IS_ERR(clk)) { + pr_err("could not get PCLK\n"); + return PTR_ERR(clk); + } + ret = clk_prepare_enable(clk); + if (ret) { + pr_err("failed to enable PCLK\n"); + return ret; + } + tick_rate = clk_get_rate(clk); base = of_iomap(np, 0); if (!base) { @@ -229,81 +246,5 @@ static int __init fttmr010_timer_common_init(struct device_node *np) return 0; } - -static int __init fttmr010_timer_of_init(struct device_node *np) -{ - /* - * These implementations require a clock reference. - * FIXME: we currently only support clocking using PCLK - * and using EXTCLK is not supported in the driver. - */ - struct clk *clk; - int ret; - - clk = of_clk_get_by_name(np, "PCLK"); - if (IS_ERR(clk)) { - pr_err("could not get PCLK\n"); - return PTR_ERR(clk); - } - ret = clk_prepare_enable(clk); - if (ret) { - pr_err("failed to enable PCLK\n"); - return ret; - } - tick_rate = clk_get_rate(clk); - - return fttmr010_timer_common_init(np); -} -CLOCKSOURCE_OF_DECLARE(fttmr010, "faraday,fttmr010", fttmr010_timer_of_init); - -/* - * Gemini-specific: relevant registers in the global syscon - */ -#define GLOBAL_STATUS 0x04 -#define CPU_AHB_RATIO_MASK (0x3 << 18) -#define CPU_AHB_1_1 (0x0 << 18) -#define CPU_AHB_3_2 (0x1 << 18) -#define CPU_AHB_24_13 (0x2 << 18) -#define CPU_AHB_2_1 (0x3 << 18) -#define REG_TO_AHB_SPEED(reg) ((((reg) >> 15) & 0x7) * 10 + 130) - -static int __init gemini_timer_of_init(struct device_node *np) -{ - static struct regmap *map; - int ret; - u32 val; - - map = syscon_regmap_lookup_by_phandle(np, "syscon"); - if (IS_ERR(map)) { - pr_err("Can't get regmap for syscon handle\n"); - return -ENODEV; - } - ret = regmap_read(map, GLOBAL_STATUS, &val); - if (ret) { - pr_err("Can't read syscon status register\n"); - return -ENXIO; - } - - tick_rate = REG_TO_AHB_SPEED(val) * 1000000; - pr_info("Bus: %dMHz ", tick_rate / 1000000); - - tick_rate /= 6; /* APB bus run AHB*(1/6) */ - - switch (val & CPU_AHB_RATIO_MASK) { - case CPU_AHB_1_1: - pr_cont("(1/1)\n"); - break; - case CPU_AHB_3_2: - pr_cont("(3/2)\n"); - break; - case CPU_AHB_24_13: - pr_cont("(24/13)\n"); - break; - case CPU_AHB_2_1: - pr_cont("(2/1)\n"); - break; - } - - return fttmr010_timer_common_init(np); -} -CLOCKSOURCE_OF_DECLARE(gemini, "cortina,gemini-timer", gemini_timer_of_init); +CLOCKSOURCE_OF_DECLARE(fttmr010, "faraday,fttmr010", fttmr010_timer_init); +CLOCKSOURCE_OF_DECLARE(gemini, "cortina,gemini-timer", fttmr010_timer_init); |