diff options
Diffstat (limited to 'drivers/clocksource')
| -rw-r--r-- | drivers/clocksource/Kconfig | 15 | ||||
| -rw-r--r-- | drivers/clocksource/Makefile | 2 | ||||
| -rw-r--r-- | drivers/clocksource/metag_generic.c | 161 | ||||
| -rw-r--r-- | drivers/clocksource/timer-atcpit100.c | 266 |
4 files changed, 277 insertions, 167 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index b3b4ed9b6874..6021a5af21da 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -386,16 +386,12 @@ config ATMEL_PIT config ATMEL_ST bool "Atmel ST timer support" if COMPILE_TEST + depends on HAS_IOMEM select TIMER_OF select MFD_SYSCON help Support for the Atmel ST timer. -config CLKSRC_METAG_GENERIC - def_bool y if METAG - help - This option enables support for the Meta per-thread timers. - config CLKSRC_EXYNOS_MCT bool "Exynos multi core timer driver" if COMPILE_TEST depends on ARM || ARM64 @@ -591,4 +587,13 @@ config CLKSRC_ST_LPC Enable this option to use the Low Power controller timer as clocksource. +config ATCPIT100_TIMER + bool "ATCPIT100 timer driver" + depends on NDS32 || COMPILE_TEST + depends on HAS_IOMEM + select TIMER_OF + default NDS32 + help + This option enables support for the Andestech ATCPIT100 timers. + endmenu diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index d6dec4489d66..f0cb07637a65 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -61,7 +61,6 @@ obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o obj-$(CONFIG_ARMV7M_SYSTICK) += armv7m_systick.o obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp804.o -obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST) += dummy_timer.o obj-$(CONFIG_KEYSTONE_TIMER) += timer-keystone.o obj-$(CONFIG_INTEGRATOR_AP_TIMER) += timer-integrator-ap.o @@ -76,3 +75,4 @@ obj-$(CONFIG_H8300_TMR16) += h8300_timer16.o obj-$(CONFIG_H8300_TPU) += h8300_tpu.o obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o obj-$(CONFIG_X86_NUMACHIP) += numachip.o +obj-$(CONFIG_ATCPIT100_TIMER) += timer-atcpit100.o diff --git a/drivers/clocksource/metag_generic.c b/drivers/clocksource/metag_generic.c deleted file mode 100644 index 3e5fa2f62d5f..000000000000 --- a/drivers/clocksource/metag_generic.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * Copyright (C) 2005-2013 Imagination Technologies Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * - * Support for Meta per-thread timers. - * - * Meta hardware threads have 2 timers. The background timer (TXTIMER) is used - * as a free-running time base (hz clocksource), and the interrupt timer - * (TXTIMERI) is used for the timer interrupt (clock event). Both counters - * traditionally count at approximately 1MHz. - */ - -#include <clocksource/metag_generic.h> -#include <linux/cpu.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/time.h> -#include <linux/init.h> -#include <linux/proc_fs.h> -#include <linux/clocksource.h> -#include <linux/clockchips.h> -#include <linux/interrupt.h> - -#include <asm/clock.h> -#include <asm/hwthread.h> -#include <asm/core_reg.h> -#include <asm/metag_mem.h> -#include <asm/tbx.h> - -#define HARDWARE_FREQ 1000000 /* 1MHz */ -#define HARDWARE_DIV 1 /* divide by 1 = 1MHz clock */ -#define HARDWARE_TO_NS_SHIFT 10 /* convert ticks to ns */ - -static unsigned int hwtimer_freq = HARDWARE_FREQ; -static DEFINE_PER_CPU(struct clock_event_device, local_clockevent); -static DEFINE_PER_CPU(char [11], local_clockevent_name); - -static int metag_timer_set_next_event(unsigned long delta, - struct clock_event_device *dev) -{ - __core_reg_set(TXTIMERI, -delta); - return 0; -} - -static u64 metag_clocksource_read(struct clocksource *cs) -{ - return __core_reg_get(TXTIMER); -} - -static struct clocksource clocksource_metag = { - .name = "META", - .rating = 200, - .mask = CLOCKSOURCE_MASK(32), - .read = metag_clocksource_read, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static irqreturn_t metag_timer_interrupt(int irq, void *dummy) -{ - struct clock_event_device *evt = this_cpu_ptr(&local_clockevent); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction metag_timer_irq = { - .name = "META core timer", - .handler = metag_timer_interrupt, - .flags = IRQF_TIMER | IRQF_IRQPOLL | IRQF_PERCPU, -}; - -unsigned long long sched_clock(void) -{ - unsigned long long ticks = __core_reg_get(TXTIMER); - return ticks << HARDWARE_TO_NS_SHIFT; -} - -static int arch_timer_starting_cpu(unsigned int cpu) -{ - unsigned int txdivtime; - struct clock_event_device *clk = &per_cpu(local_clockevent, cpu); - char *name = per_cpu(local_clockevent_name, cpu); - - txdivtime = __core_reg_get(TXDIVTIME); - - txdivtime &= ~TXDIVTIME_DIV_BITS; - txdivtime |= (HARDWARE_DIV & TXDIVTIME_DIV_BITS); - - __core_reg_set(TXDIVTIME, txdivtime); - - sprintf(name, "META %d", cpu); - clk->name = name; - clk->features = CLOCK_EVT_FEAT_ONESHOT, - - clk->rating = 200, - clk->shift = 12, - clk->irq = tbisig_map(TBID_SIGNUM_TRT), - clk->set_next_event = metag_timer_set_next_event, - - clk->mult = div_sc(hwtimer_freq, NSEC_PER_SEC, clk->shift); - clk->max_delta_ns = clockevent_delta2ns(0x7fffffff, clk); - clk->max_delta_ticks = 0x7fffffff; - clk->min_delta_ns = clockevent_delta2ns(0xf, clk); - clk->min_delta_ticks = 0xf; - clk->cpumask = cpumask_of(cpu); - - clockevents_register_device(clk); - - /* - * For all non-boot CPUs we need to synchronize our free - * running clock (TXTIMER) with the boot CPU's clock. - * - * While this won't be accurate, it should be close enough. - */ - if (cpu) { - unsigned int thread0 = cpu_2_hwthread_id[0]; - unsigned long val; - - val = core_reg_read(TXUCT_ID, TXTIMER_REGNUM, thread0); - __core_reg_set(TXTIMER, val); - } - return 0; -} - -int __init metag_generic_timer_init(void) -{ - /* - * On Meta 2 SoCs, the actual frequency of the timer is based on the - * Meta core clock speed divided by an integer, so it is only - * approximately 1MHz. Calculating the real frequency here drastically - * reduces clock skew on these SoCs. - */ -#ifdef CONFIG_METAG_META21 - hwtimer_freq = get_coreclock() / (metag_in32(EXPAND_TIMER_DIV) + 1); -#endif - pr_info("Timer frequency: %u Hz\n", hwtimer_freq); - - clocksource_register_hz(&clocksource_metag, hwtimer_freq); - - setup_irq(tbisig_map(TBID_SIGNUM_TRT), &metag_timer_irq); - - /* Hook cpu boot to configure the CPU's timers */ - return cpuhp_setup_state(CPUHP_AP_METAG_TIMER_STARTING, - "clockevents/metag:starting", - arch_timer_starting_cpu, NULL); -} diff --git a/drivers/clocksource/timer-atcpit100.c b/drivers/clocksource/timer-atcpit100.c new file mode 100644 index 000000000000..5e23d7b4a722 --- /dev/null +++ b/drivers/clocksource/timer-atcpit100.c @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2005-2017 Andes Technology Corporation +/* + * Andestech ATCPIT100 Timer Device Driver Implementation + * Rick Chen, Andes Technology Corporation <rick@andestech.com> + * + */ + +#include <linux/irq.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/cpufreq.h> +#include <linux/sched.h> +#include <linux/sched_clock.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include "timer-of.h" +#ifdef CONFIG_NDS32 +#include <asm/vdso_timer_info.h> +#endif + +/* + * Definition of register offsets + */ + +/* ID and Revision Register */ +#define ID_REV 0x0 + +/* Configuration Register */ +#define CFG 0x10 + +/* Interrupt Enable Register */ +#define INT_EN 0x14 +#define CH_INT_EN(c, i) ((1<<i)<<(4*c)) +#define CH0INT0EN 0x01 + +/* Interrupt Status Register */ +#define INT_STA 0x18 +#define CH0INT0 0x01 + +/* Channel Enable Register */ +#define CH_EN 0x1C +#define CH0TMR0EN 0x1 +#define CH1TMR0EN 0x10 + +/* Channel 0 , 1 Control Register */ +#define CH0_CTL (0x20) +#define CH1_CTL (0x20 + 0x10) + +/* Channel clock source , bit 3 , 0:External clock , 1:APB clock */ +#define APB_CLK BIT(3) + +/* Channel mode , bit 0~2 */ +#define TMR_32 0x1 +#define TMR_16 0x2 +#define TMR_8 0x3 + +/* Channel 0 , 1 Reload Register */ +#define CH0_REL (0x24) +#define CH1_REL (0x24 + 0x10) + +/* Channel 0 , 1 Counter Register */ +#define CH0_CNT (0x28) +#define CH1_CNT (0x28 + 0x10) + +#define TIMER_SYNC_TICKS 3 + +static void atcpit100_ch1_tmr0_en(void __iomem *base) +{ + writel(~0, base + CH1_REL); + writel(APB_CLK|TMR_32, base + CH1_CTL); +} + +static void atcpit100_ch0_tmr0_en(void __iomem *base) +{ + writel(APB_CLK|TMR_32, base + CH0_CTL); +} + +static void atcpit100_clkevt_time_setup(void __iomem *base, unsigned long delay) +{ + writel(delay, base + CH0_CNT); + writel(delay, base + CH0_REL); +} + +static void atcpit100_timer_clear_interrupt(void __iomem *base) +{ + u32 val; + + val = readl(base + INT_STA); + writel(val | CH0INT0, base + INT_STA); +} + +static void atcpit100_clocksource_start(void __iomem *base) +{ + u32 val; + + val = readl(base + CH_EN); + writel(val | CH1TMR0EN, base + CH_EN); +} + +static void atcpit100_clkevt_time_start(void __iomem *base) +{ + u32 val; + + val = readl(base + CH_EN); + writel(val | CH0TMR0EN, base + CH_EN); +} + +static void atcpit100_clkevt_time_stop(void __iomem *base) +{ + u32 val; + + atcpit100_timer_clear_interrupt(base); + val = readl(base + CH_EN); + writel(val & ~CH0TMR0EN, base + CH_EN); +} + +static int atcpit100_clkevt_next_event(unsigned long evt, + struct clock_event_device *clkevt) +{ + u32 val; + struct timer_of *to = to_timer_of(clkevt); + + val = readl(timer_of_base(to) + CH_EN); + writel(val & ~CH0TMR0EN, timer_of_base(to) + CH_EN); + writel(evt, timer_of_base(to) + CH0_REL); + writel(val | CH0TMR0EN, timer_of_base(to) + CH_EN); + + return 0; +} + +static int atcpit100_clkevt_set_periodic(struct clock_event_device *evt) +{ + struct timer_of *to = to_timer_of(evt); + + atcpit100_clkevt_time_setup(timer_of_base(to), timer_of_period(to)); + atcpit100_clkevt_time_start(timer_of_base(to)); + + return 0; +} +static int atcpit100_clkevt_shutdown(struct clock_event_device *evt) +{ + struct timer_of *to = to_timer_of(evt); + + atcpit100_clkevt_time_stop(timer_of_base(to)); + + return 0; +} +static int atcpit100_clkevt_set_oneshot(struct clock_event_device *evt) +{ + struct timer_of *to = to_timer_of(evt); + u32 val; + + writel(~0x0, timer_of_base(to) + CH0_REL); + val = readl(timer_of_base(to) + CH_EN); + writel(val | CH0TMR0EN, timer_of_base(to) + CH_EN); + + return 0; +} + +static irqreturn_t atcpit100_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = (struct clock_event_device *)dev_id; + struct timer_of *to = to_timer_of(evt); + + atcpit100_timer_clear_interrupt(timer_of_base(to)); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct timer_of to = { + .flags = TIMER_OF_IRQ | TIMER_OF_CLOCK | TIMER_OF_BASE, + + .clkevt = { + .name = "atcpit100_tick", + .rating = 300, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_state_shutdown = atcpit100_clkevt_shutdown, + .set_state_periodic = atcpit100_clkevt_set_periodic, + .set_state_oneshot = atcpit100_clkevt_set_oneshot, + .tick_resume = atcpit100_clkevt_shutdown, + .set_next_event = atcpit100_clkevt_next_event, + .cpumask = cpu_all_mask, + }, + + .of_irq = { + .handler = atcpit100_timer_interrupt, + .flags = IRQF_TIMER | IRQF_IRQPOLL, + }, + + /* + * FIXME: we currently only support clocking using PCLK + * and using EXTCLK is not supported in the driver. + */ + .of_clk = { + .name = "PCLK", + } +}; + +static u64 notrace atcpit100_timer_sched_read(void) +{ + return ~readl(timer_of_base(&to) + CH1_CNT); +} + +#ifdef CONFIG_NDS32 +static void fill_vdso_need_info(struct device_node *node) +{ + struct resource timer_res; + of_address_to_resource(node, 0, &timer_res); + timer_info.mapping_base = (unsigned long)timer_res.start; + timer_info.cycle_count_down = true; + timer_info.cycle_count_reg_offset = CH1_CNT; +} +#endif + +static int __init atcpit100_timer_init(struct device_node *node) +{ + int ret; + u32 val; + void __iomem *base; + + ret = timer_of_init(node, &to); + if (ret) + return ret; + + base = timer_of_base(&to); + + sched_clock_register(atcpit100_timer_sched_read, 32, + timer_of_rate(&to)); + + ret = clocksource_mmio_init(base + CH1_CNT, + node->name, timer_of_rate(&to), 300, 32, + clocksource_mmio_readl_down); + + if (ret) { + pr_err("Failed to register clocksource\n"); + return ret; + } + + /* clear channel 0 timer0 interrupt */ + atcpit100_timer_clear_interrupt(base); + + clockevents_config_and_register(&to.clkevt, timer_of_rate(&to), + TIMER_SYNC_TICKS, 0xffffffff); + atcpit100_ch0_tmr0_en(base); + atcpit100_ch1_tmr0_en(base); + atcpit100_clocksource_start(base); + atcpit100_clkevt_time_start(base); + + /* Enable channel 0 timer0 interrupt */ + val = readl(base + INT_EN); + writel(val | CH0INT0EN, base + INT_EN); + +#ifdef CONFIG_NDS32 + fill_vdso_need_info(node); +#endif + + return ret; +} + +TIMER_OF_DECLARE(atcpit100, "andestech,atcpit100", atcpit100_timer_init); |