1 files changed, 194 insertions, 0 deletions
diff --git a/drivers/clocksource/vf_pit_timer.c b/drivers/clocksource/vf_pit_timer.c
new file mode 100644
index 000000000000..587e0202a70b
--- /dev/null
+++ b/drivers/clocksource/vf_pit_timer.c
@@ -0,0 +1,194 @@
+/*
+ * Copyright 2012-2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+
+/*
+ * Each pit takes 0x10 Bytes register space
+ */
+#define PITMCR		0x00
+#define PIT0_OFFSET	0x100
+#define PITn_OFFSET(n)	(PIT0_OFFSET + 0x10 * (n))
+#define PITLDVAL	0x00
+#define PITCVAL		0x04
+#define PITTCTRL	0x08
+#define PITTFLG		0x0c
+
+#define PITMCR_MDIS	(0x1 << 1)
+
+#define PITTCTRL_TEN	(0x1 << 0)
+#define PITTCTRL_TIE	(0x1 << 1)
+#define PITCTRL_CHN	(0x1 << 2)
+
+#define PITTFLG_TIF	0x1
+
+static void __iomem *clksrc_base;
+static void __iomem *clkevt_base;
+static unsigned long cycle_per_jiffy;
+
+static inline void pit_timer_enable(void)
+{
+	__raw_writel(PITTCTRL_TEN | PITTCTRL_TIE, clkevt_base + PITTCTRL);
+}
+
+static inline void pit_timer_disable(void)
+{
+	__raw_writel(0, clkevt_base + PITTCTRL);
+}
+
+static inline void pit_irq_acknowledge(void)
+{
+	__raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG);
+}
+
+static unsigned int pit_read_sched_clock(void)
+{
+	return __raw_readl(clksrc_base + PITCVAL);
+}
+
+static int __init pit_clocksource_init(unsigned long rate)
+{
+	/* set the max load value and start the clock source counter */
+	__raw_writel(0, clksrc_base + PITTCTRL);
+	__raw_writel(~0UL, clksrc_base + PITLDVAL);
+	__raw_writel(PITTCTRL_TEN, clksrc_base + PITTCTRL);
+
+	setup_sched_clock(pit_read_sched_clock, 32, rate);
+	return clocksource_mmio_init(clksrc_base + PITCVAL, "vf-pit", rate,
+			300, 32, clocksource_mmio_readl_down);
+}
+
+static int pit_set_next_event(unsigned long delta,
+				struct clock_event_device *unused)
+{
+	/*
+	 * set a new value to PITLDVAL register will not restart the timer,
+	 * to abort the current cycle and start a timer period with the new
+	 * value, the timer must be disabled and enabled again.
+	 * and the PITLAVAL should be set to delta minus one according to pit
+	 * hardware requirement.
+	 */
+	pit_timer_disable();
+	__raw_writel(delta - 1, clkevt_base + PITLDVAL);
+	pit_timer_enable();
+
+	return 0;
+}
+
+static void pit_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		pit_set_next_event(cycle_per_jiffy, evt);
+		break;
+	default:
+		break;
+	}
+}
+
+static irqreturn_t pit_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	pit_irq_acknowledge();
+
+	/*
+	 * pit hardware doesn't support oneshot, it will generate an interrupt
+	 * and reload the counter value from PITLDVAL when PITCVAL reach zero,
+	 * and start the counter again. So software need to disable the timer
+	 * to stop the counter loop in ONESHOT mode.
+	 */
+	if (likely(evt->mode == CLOCK_EVT_MODE_ONESHOT))
+		pit_timer_disable();
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct clock_event_device clockevent_pit = {
+	.name		= "VF pit timer",
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode	= pit_set_mode,
+	.set_next_event	= pit_set_next_event,
+	.rating		= 300,
+};
+
+static struct irqaction pit_timer_irq = {
+	.name		= "VF pit timer",
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= pit_timer_interrupt,
+	.dev_id		= &clockevent_pit,
+};
+
+static int __init pit_clockevent_init(unsigned long rate, int irq)
+{
+	__raw_writel(0, clkevt_base + PITTCTRL);
+	__raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG);
+
+	BUG_ON(setup_irq(irq, &pit_timer_irq));
+
+	clockevent_pit.cpumask = cpumask_of(0);
+	clockevent_pit.irq = irq;
+	/*
+	 * The value for the LDVAL register trigger is calculated as:
+	 * LDVAL trigger = (period / clock period) - 1
+	 * The pit is a 32-bit down count timer, when the conter value
+	 * reaches 0, it will generate an interrupt, thus the minimal
+	 * LDVAL trigger value is 1. And then the min_delta is
+	 * minimal LDVAL trigger value + 1, and the max_delta is full 32-bit.
+	 */
+	clockevents_config_and_register(&clockevent_pit, rate, 2, 0xffffffff);
+
+	return 0;
+}
+
+static void __init pit_timer_init(struct device_node *np)
+{
+	struct clk *pit_clk;
+	void __iomem *timer_base;
+	unsigned long clk_rate;
+	int irq;
+
+	timer_base = of_iomap(np, 0);
+	BUG_ON(!timer_base);
+
+	/*
+	 * PIT0 and PIT1 can be chained to build a 64-bit timer,
+	 * so choose PIT2 as clocksource, PIT3 as clockevent device,
+	 * and leave PIT0 and PIT1 unused for anyone else who needs them.
+	 */
+	clksrc_base = timer_base + PITn_OFFSET(2);
+	clkevt_base = timer_base + PITn_OFFSET(3);
+
+	irq = irq_of_parse_and_map(np, 0);
+	BUG_ON(irq <= 0);
+
+	pit_clk = of_clk_get(np, 0);
+	BUG_ON(IS_ERR(pit_clk));
+
+	BUG_ON(clk_prepare_enable(pit_clk));
+
+	clk_rate = clk_get_rate(pit_clk);
+	cycle_per_jiffy = clk_rate / (HZ);
+
+	/* enable the pit module */
+	__raw_writel(~PITMCR_MDIS, timer_base + PITMCR);
+
+	BUG_ON(pit_clocksource_init(clk_rate));
+
+	pit_clockevent_init(clk_rate, irq);
+}
+CLOCKSOURCE_OF_DECLARE(vf610, "fsl,vf610-pit", pit_timer_init);