23 files changed, 124 insertions, 68 deletions

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 45653a0e6ecd..a48e326f4ef7 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -27,7 +27,7 @@ config COMMON_CLK_WM831X
 	tristate "Clock driver for WM831x/2x PMICs"
 	depends on MFD_WM831X
 	---help---
-          Supports the clocking subsystem of the WM831x/2x series of
+	  Supports the clocking subsystem of the WM831x/2x series of
 	  PMICs from Wolfson Microelectronics.
 
 source "drivers/clk/versatile/Kconfig"
diff --git a/drivers/clk/at91/at91sam9260.c b/drivers/clk/at91/at91sam9260.c
index 0aabe49aed09..a9d4234758d7 100644
--- a/drivers/clk/at91/at91sam9260.c
+++ b/drivers/clk/at91/at91sam9260.c
@@ -348,7 +348,7 @@ static void __init at91sam926x_pmc_setup(struct device_node *np,
 		return;
 	mainxtal_name = of_clk_get_parent_name(np, i);
 
-	regmap = syscon_node_to_regmap(np);
+	regmap = device_node_to_regmap(np);
 	if (IS_ERR(regmap))
 		return;
 
diff --git a/drivers/clk/at91/at91sam9rl.c b/drivers/clk/at91/at91sam9rl.c
index 0ac34cdaa106..77fe83a73bf4 100644
--- a/drivers/clk/at91/at91sam9rl.c
+++ b/drivers/clk/at91/at91sam9rl.c
@@ -83,7 +83,7 @@ static void __init at91sam9rl_pmc_setup(struct device_node *np)
 		return;
 	mainxtal_name = of_clk_get_parent_name(np, i);
 
-	regmap = syscon_node_to_regmap(np);
+	regmap = device_node_to_regmap(np);
 	if (IS_ERR(regmap))
 		return;
 
diff --git a/drivers/clk/at91/at91sam9x5.c b/drivers/clk/at91/at91sam9x5.c
index 0855f3a80cc7..086cf0b4955c 100644
--- a/drivers/clk/at91/at91sam9x5.c
+++ b/drivers/clk/at91/at91sam9x5.c
@@ -146,7 +146,7 @@ static void __init at91sam9x5_pmc_setup(struct device_node *np,
 		return;
 	mainxtal_name = of_clk_get_parent_name(np, i);
 
-	regmap = syscon_node_to_regmap(np);
+	regmap = device_node_to_regmap(np);
 	if (IS_ERR(regmap))
 		return;
 
diff --git a/drivers/clk/at91/clk-sam9x60-pll.c b/drivers/clk/at91/clk-sam9x60-pll.c
index 34b817825b22..dfb354a5ff18 100644
--- a/drivers/clk/at91/clk-sam9x60-pll.c
+++ b/drivers/clk/at91/clk-sam9x60-pll.c
@@ -25,7 +25,8 @@
 #define		PMC_PLL_CTRL1_MUL_MSK		GENMASK(30, 24)
 
 #define PMC_PLL_ACR	0x18
-#define		PMC_PLL_ACR_DEFAULT		0x1b040010UL
+#define		PMC_PLL_ACR_DEFAULT_UPLL	0x12020010UL
+#define		PMC_PLL_ACR_DEFAULT_PLLA	0x00020010UL
 #define		PMC_PLL_ACR_UTMIVR		BIT(12)
 #define		PMC_PLL_ACR_UTMIBG		BIT(13)
 #define		PMC_PLL_ACR_LOOP_FILTER_MSK	GENMASK(31, 24)
@@ -88,7 +89,10 @@ static int sam9x60_pll_prepare(struct clk_hw *hw)
 	}
 
 	/* Recommended value for PMC_PLL_ACR */
-	val = PMC_PLL_ACR_DEFAULT;
+	if (pll->characteristics->upll)
+		val = PMC_PLL_ACR_DEFAULT_UPLL;
+	else
+		val = PMC_PLL_ACR_DEFAULT_PLLA;
 	regmap_write(regmap, PMC_PLL_ACR, val);
 
 	regmap_write(regmap, PMC_PLL_CTRL1,
diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
index 0b03cfae3a9d..b71515acdec1 100644
--- a/drivers/clk/at91/pmc.c
+++ b/drivers/clk/at91/pmc.c
@@ -275,7 +275,7 @@ static int __init pmc_register_ops(void)
 
 	np = of_find_matching_node(NULL, sama5d2_pmc_dt_ids);
 
-	pmcreg = syscon_node_to_regmap(np);
+	pmcreg = device_node_to_regmap(np);
 	if (IS_ERR(pmcreg))
 		return PTR_ERR(pmcreg);
 
diff --git a/drivers/clk/at91/sam9x60.c b/drivers/clk/at91/sam9x60.c
index 86238d5ecb4d..77398aefeb6d 100644
--- a/drivers/clk/at91/sam9x60.c
+++ b/drivers/clk/at91/sam9x60.c
@@ -47,6 +47,7 @@ static const struct clk_programmable_layout sam9x60_programmable_layout = {
 	.pres_shift = 8,
 	.css_mask = 0x1f,
 	.have_slck_mck = 0,
+	.is_pres_direct = 1,
 };
 
 static const struct clk_pcr_layout sam9x60_pcr_layout = {
diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c
index 0de1108737db..ff7e3f727082 100644
--- a/drivers/clk/at91/sama5d2.c
+++ b/drivers/clk/at91/sama5d2.c
@@ -162,7 +162,7 @@ static void __init sama5d2_pmc_setup(struct device_node *np)
 		return;
 	mainxtal_name = of_clk_get_parent_name(np, i);
 
-	regmap = syscon_node_to_regmap(np);
+	regmap = device_node_to_regmap(np);
 	if (IS_ERR(regmap))
 		return;
 
diff --git a/drivers/clk/at91/sama5d4.c b/drivers/clk/at91/sama5d4.c
index 25b156d4e645..a6dee4a3b6e4 100644
--- a/drivers/clk/at91/sama5d4.c
+++ b/drivers/clk/at91/sama5d4.c
@@ -136,7 +136,7 @@ static void __init sama5d4_pmc_setup(struct device_node *np)
 		return;
 	mainxtal_name = of_clk_get_parent_name(np, i);
 
-	regmap = syscon_node_to_regmap(np);
+	regmap = device_node_to_regmap(np);
 	if (IS_ERR(regmap))
 		return;
 
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 0b00eaed3a81..fa99d0b42ccb 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3249,6 +3249,34 @@ static inline void clk_debug_unregister(struct clk_core *core)
 }
 #endif
 
+static void clk_core_reparent_orphans_nolock(void)
+{
+	struct clk_core *orphan;
+	struct hlist_node *tmp2;
+
+	/*
+	 * walk the list of orphan clocks and reparent any that newly finds a
+	 * parent.
+	 */
+	hlist_for_each_entry_safe(orphan, tmp2, &clk_orphan_list, child_node) {
+		struct clk_core *parent = __clk_init_parent(orphan);
+
+		/*
+		 * We need to use __clk_set_parent_before() and _after() to
+		 * to properly migrate any prepare/enable count of the orphan
+		 * clock. This is important for CLK_IS_CRITICAL clocks, which
+		 * are enabled during init but might not have a parent yet.
+		 */
+		if (parent) {
+			/* update the clk tree topology */
+			__clk_set_parent_before(orphan, parent);
+			__clk_set_parent_after(orphan, parent, NULL);
+			__clk_recalc_accuracies(orphan);
+			__clk_recalc_rates(orphan, 0);
+		}
+	}
+}
+
 /**
  * __clk_core_init - initialize the data structures in a struct clk_core
  * @core:	clk_core being initialized
@@ -3259,8 +3287,6 @@ static inline void clk_debug_unregister(struct clk_core *core)
 static int __clk_core_init(struct clk_core *core)
 {
 	int ret;
-	struct clk_core *orphan;
-	struct hlist_node *tmp2;
 	unsigned long rate;
 
 	if (!core)
@@ -3409,34 +3435,26 @@ static int __clk_core_init(struct clk_core *core)
 	if (core->flags & CLK_IS_CRITICAL) {
 		unsigned long flags;
 
-		clk_core_prepare(core);
+		ret = clk_core_prepare(core);
+		if (ret) {
+			pr_warn("%s: critical clk '%s' failed to prepare\n",
+			       __func__, core->name);
+			goto out;
+		}
 
 		flags = clk_enable_lock();
-		clk_core_enable(core);
+		ret = clk_core_enable(core);
 		clk_enable_unlock(flags);
+		if (ret) {
+			pr_warn("%s: critical clk '%s' failed to enable\n",
+			       __func__, core->name);
+			clk_core_unprepare(core);
+			goto out;
+		}
 	}
 
-	/*
-	 * walk the list of orphan clocks and reparent any that newly finds a
-	 * parent.
-	 */
-	hlist_for_each_entry_safe(orphan, tmp2, &clk_orphan_list, child_node) {
-		struct clk_core *parent = __clk_init_parent(orphan);
+	clk_core_reparent_orphans_nolock();
 
-		/*
-		 * We need to use __clk_set_parent_before() and _after() to
-		 * to properly migrate any prepare/enable count of the orphan
-		 * clock. This is important for CLK_IS_CRITICAL clocks, which
-		 * are enabled during init but might not have a parent yet.
-		 */
-		if (parent) {
-			/* update the clk tree topology */
-			__clk_set_parent_before(orphan, parent);
-			__clk_set_parent_after(orphan, parent, NULL);
-			__clk_recalc_accuracies(orphan);
-			__clk_recalc_rates(orphan, 0);
-		}
-	}
 
 	kref_init(&core->ref);
 out:
@@ -4216,6 +4234,13 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb)
 EXPORT_SYMBOL_GPL(clk_notifier_unregister);
 
 #ifdef CONFIG_OF
+static void clk_core_reparent_orphans(void)
+{
+	clk_prepare_lock();
+	clk_core_reparent_orphans_nolock();
+	clk_prepare_unlock();
+}
+
 /**
  * struct of_clk_provider - Clock provider registration structure
  * @link: Entry in global list of clock providers
@@ -4311,6 +4336,8 @@ int of_clk_add_provider(struct device_node *np,
 	mutex_unlock(&of_clk_mutex);
 	pr_debug("Added clock from %pOF\n", np);
 
+	clk_core_reparent_orphans();
+
 	ret = of_clk_set_defaults(np, true);
 	if (ret < 0)
 		of_clk_del_provider(np);
@@ -4346,6 +4373,8 @@ int of_clk_add_hw_provider(struct device_node *np,
 	mutex_unlock(&of_clk_mutex);
 	pr_debug("Added clk_hw provider from %pOF\n", np);
 
+	clk_core_reparent_orphans();
+
 	ret = of_clk_set_defaults(np, true);
 	if (ret < 0)
 		of_clk_del_provider(np);
diff --git a/drivers/clk/imx/clk-composite-8m.c b/drivers/clk/imx/clk-composite-8m.c
index 388bdb94f841..d3486ee79ab5 100644
--- a/drivers/clk/imx/clk-composite-8m.c
+++ b/drivers/clk/imx/clk-composite-8m.c
@@ -142,6 +142,7 @@ struct clk *imx8m_clk_composite_flags(const char *name,
 	mux->reg = reg;
 	mux->shift = PCG_PCS_SHIFT;
 	mux->mask = PCG_PCS_MASK;
+	mux->lock = &imx_ccm_lock;
 
 	div = kzalloc(sizeof(*div), GFP_KERNEL);
 	if (!div)
@@ -161,6 +162,7 @@ struct clk *imx8m_clk_composite_flags(const char *name,
 	gate_hw = &gate->hw;
 	gate->reg = reg;
 	gate->bit_idx = PCG_CGC_SHIFT;
+	gate->lock = &imx_ccm_lock;
 
 	hw = clk_hw_register_composite(NULL, name, parent_names, num_parents,
 			mux_hw, &clk_mux_ops, div_hw,
diff --git a/drivers/clk/imx/clk-imx7ulp.c b/drivers/clk/imx/clk-imx7ulp.c
index 3fdf3d494f0a..281191b55b3a 100644
--- a/drivers/clk/imx/clk-imx7ulp.c
+++ b/drivers/clk/imx/clk-imx7ulp.c
@@ -40,6 +40,7 @@ static const struct clk_div_table ulp_div_table[] = {
 	{ .val = 5, .div = 16, },
 	{ .val = 6, .div = 32, },
 	{ .val = 7, .div = 64, },
+	{ /* sentinel */ },
 };
 
 static const int pcc2_uart_clk_ids[] __initconst = {
diff --git a/drivers/clk/imx/clk-pll14xx.c b/drivers/clk/imx/clk-pll14xx.c
index 5c458199060a..3636c8035c7d 100644
--- a/drivers/clk/imx/clk-pll14xx.c
+++ b/drivers/clk/imx/clk-pll14xx.c
@@ -159,7 +159,7 @@ static int clk_pll14xx_wait_lock(struct clk_pll14xx *pll)
 {
 	u32 val;
 
-	return readl_poll_timeout(pll->base, val, val & LOCK_TIMEOUT_US, 0,
+	return readl_poll_timeout(pll->base, val, val & LOCK_STATUS, 0,
 			LOCK_TIMEOUT_US);
 }
 
diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig
index 7efc3617bbd5..ea3c70d1307e 100644
--- a/drivers/clk/mediatek/Kconfig
+++ b/drivers/clk/mediatek/Kconfig
@@ -174,36 +174,36 @@ config COMMON_CLK_MT6779_AUDSYS
 	  This driver supports Mediatek MT6779 audsys clocks.
 
 config COMMON_CLK_MT6797
-       bool "Clock driver for MediaTek MT6797"
-       depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST
-       select COMMON_CLK_MEDIATEK
-       default ARCH_MEDIATEK && ARM64
-       ---help---
-         This driver supports MediaTek MT6797 basic clocks.
+	bool "Clock driver for MediaTek MT6797"
+	depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST
+	select COMMON_CLK_MEDIATEK
+	default ARCH_MEDIATEK && ARM64
+	---help---
+	  This driver supports MediaTek MT6797 basic clocks.
 
 config COMMON_CLK_MT6797_MMSYS
-       bool "Clock driver for MediaTek MT6797 mmsys"
-       depends on COMMON_CLK_MT6797
-       ---help---
-         This driver supports MediaTek MT6797 mmsys clocks.
+	bool "Clock driver for MediaTek MT6797 mmsys"
+	depends on COMMON_CLK_MT6797
+	---help---
+	  This driver supports MediaTek MT6797 mmsys clocks.
 
 config COMMON_CLK_MT6797_IMGSYS
-       bool "Clock driver for MediaTek MT6797 imgsys"
-       depends on COMMON_CLK_MT6797
-       ---help---
-         This driver supports MediaTek MT6797 imgsys clocks.
+	bool "Clock driver for MediaTek MT6797 imgsys"
+	depends on COMMON_CLK_MT6797
+	---help---
+	  This driver supports MediaTek MT6797 imgsys clocks.
 
 config COMMON_CLK_MT6797_VDECSYS
-       bool "Clock driver for MediaTek MT6797 vdecsys"
-       depends on COMMON_CLK_MT6797
-       ---help---
-         This driver supports MediaTek MT6797 vdecsys clocks.
+	bool "Clock driver for MediaTek MT6797 vdecsys"
+	depends on COMMON_CLK_MT6797
+	---help---
+	  This driver supports MediaTek MT6797 vdecsys clocks.
 
 config COMMON_CLK_MT6797_VENCSYS
-       bool "Clock driver for MediaTek MT6797 vencsys"
-       depends on COMMON_CLK_MT6797
-       ---help---
-         This driver supports MediaTek MT6797 vencsys clocks.
+	bool "Clock driver for MediaTek MT6797 vencsys"
+	depends on COMMON_CLK_MT6797
+	---help---
+	  This driver supports MediaTek MT6797 vencsys clocks.
 
 config COMMON_CLK_MT7622
 	bool "Clock driver for MediaTek MT7622"
diff --git a/drivers/clk/mvebu/Kconfig b/drivers/clk/mvebu/Kconfig
index 415e6906a113..ded07b0bd0d5 100644
--- a/drivers/clk/mvebu/Kconfig
+++ b/drivers/clk/mvebu/Kconfig
@@ -29,7 +29,7 @@ config ARMADA_39X_CLK
 	select MVEBU_CLK_COMMON
 
 config ARMADA_37XX_CLK
-       bool
+	bool
 
 config ARMADA_XP_CLK
 	bool
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 3b33ef129274..f37f3cd615f2 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config KRAIT_CLOCKS
-       bool
-       select KRAIT_L2_ACCESSORS
+	bool
+	select KRAIT_L2_ACCESSORS
 
 config QCOM_GDSC
 	bool
diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c
index 38424e63bcae..7f59fb8da033 100644
--- a/drivers/clk/qcom/gcc-sc7180.c
+++ b/drivers/clk/qcom/gcc-sc7180.c
@@ -2186,7 +2186,8 @@ static struct gdsc hlos1_vote_mmnoc_mmu_tbu_hf0_gdsc = {
 	.pd = {
 		.name = "hlos1_vote_mmnoc_mmu_tbu_hf0_gdsc",
 	},
-	.pwrsts = PWRSTS_OFF_ON | VOTABLE,
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = VOTABLE,
 };
 
 static struct gdsc hlos1_vote_mmnoc_mmu_tbu_sf_gdsc = {
@@ -2194,7 +2195,8 @@ static struct gdsc hlos1_vote_mmnoc_mmu_tbu_sf_gdsc = {
 	.pd = {
 		.name = "hlos1_vote_mmnoc_mmu_tbu_sf_gdsc",
 	},
-	.pwrsts = PWRSTS_OFF_ON | VOTABLE,
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = VOTABLE,
 };
 
 static struct gdsc *gcc_sc7180_gdscs[] = {
diff --git a/drivers/clk/qcom/gpucc-msm8998.c b/drivers/clk/qcom/gpucc-msm8998.c
index e5e2492b20c5..9b3923af02a1 100644
--- a/drivers/clk/qcom/gpucc-msm8998.c
+++ b/drivers/clk/qcom/gpucc-msm8998.c
@@ -242,10 +242,12 @@ static struct clk_branch gfx3d_isense_clk = {
 
 static struct gdsc gpu_cx_gdsc = {
 	.gdscr = 0x1004,
+	.gds_hw_ctrl = 0x1008,
 	.pd = {
 		.name = "gpu_cx",
 	},
 	.pwrsts = PWRSTS_OFF_ON,
+	.flags = VOTABLE,
 };
 
 static struct gdsc gpu_gx_gdsc = {
diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index 3a991ca1ee36..c9e5a1fb6653 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -12,6 +12,7 @@
 #include <linux/clk-provider.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/clk.h>
 
 #include "clk.h"
 #include "clk-cpu.h"
@@ -1646,6 +1647,13 @@ static void __init exynos5x_clk_init(struct device_node *np,
 				     exynos5x_subcmus);
 	}
 
+	/*
+	 * Keep top part of G3D clock path enabled permanently to ensure
+	 * that the internal busses get their clock regardless of the
+	 * main G3D clock enablement status.
+	 */
+	clk_prepare_enable(__clk_lookup("mout_sw_aclk_g3d"));
+
 	samsung_clk_of_add_provider(np, ctx);
 }
 
diff --git a/drivers/clk/tegra/clk.c b/drivers/clk/tegra/clk.c
index e6bd6d1ea012..f6cdce441cf7 100644
--- a/drivers/clk/tegra/clk.c
+++ b/drivers/clk/tegra/clk.c
@@ -231,8 +231,10 @@ struct clk ** __init tegra_clk_init(void __iomem *regs, int num, int banks)
 	periph_banks = banks;
 
 	clks = kcalloc(num, sizeof(struct clk *), GFP_KERNEL);
-	if (!clks)
+	if (!clks) {
 		kfree(periph_clk_enb_refcnt);
+		return NULL;
+	}
 
 	clk_num = num;
 
diff --git a/drivers/clk/uniphier/clk-uniphier-peri.c b/drivers/clk/uniphier/clk-uniphier-peri.c
index 9caa52944b1c..3e32db9dad81 100644
--- a/drivers/clk/uniphier/clk-uniphier-peri.c
+++ b/drivers/clk/uniphier/clk-uniphier-peri.c
@@ -18,8 +18,8 @@
 #define UNIPHIER_PERI_CLK_FI2C(idx, ch)					\
 	UNIPHIER_CLK_GATE("i2c" #ch, (idx), "i2c", 0x24, 24 + (ch))
 
-#define UNIPHIER_PERI_CLK_SCSSI(idx)					\
-	UNIPHIER_CLK_GATE("scssi", (idx), "spi", 0x20, 17)
+#define UNIPHIER_PERI_CLK_SCSSI(idx, ch)				\
+	UNIPHIER_CLK_GATE("scssi" #ch, (idx), "spi", 0x20, 17 + (ch))
 
 #define UNIPHIER_PERI_CLK_MCSSI(idx)					\
 	UNIPHIER_CLK_GATE("mcssi", (idx), "spi", 0x24, 14)
@@ -35,7 +35,7 @@ const struct uniphier_clk_data uniphier_ld4_peri_clk_data[] = {
 	UNIPHIER_PERI_CLK_I2C(6, 2),
 	UNIPHIER_PERI_CLK_I2C(7, 3),
 	UNIPHIER_PERI_CLK_I2C(8, 4),
-	UNIPHIER_PERI_CLK_SCSSI(11),
+	UNIPHIER_PERI_CLK_SCSSI(11, 0),
 	{ /* sentinel */ }
 };
 
@@ -51,7 +51,10 @@ const struct uniphier_clk_data uniphier_pro4_peri_clk_data[] = {
 	UNIPHIER_PERI_CLK_FI2C(8, 4),
 	UNIPHIER_PERI_CLK_FI2C(9, 5),
 	UNIPHIER_PERI_CLK_FI2C(10, 6),
-	UNIPHIER_PERI_CLK_SCSSI(11),
-	UNIPHIER_PERI_CLK_MCSSI(12),
+	UNIPHIER_PERI_CLK_SCSSI(11, 0),
+	UNIPHIER_PERI_CLK_SCSSI(12, 1),
+	UNIPHIER_PERI_CLK_SCSSI(13, 2),
+	UNIPHIER_PERI_CLK_SCSSI(14, 3),
+	UNIPHIER_PERI_CLK_MCSSI(15),
 	{ /* sentinel */ }
 };
diff --git a/drivers/clk/ux500/u8500_of_clk.c b/drivers/clk/ux500/u8500_of_clk.c
index 72ed97c6662a..0aedd42fad52 100644
--- a/drivers/clk/ux500/u8500_of_clk.c
+++ b/drivers/clk/ux500/u8500_of_clk.c
@@ -99,8 +99,10 @@ static void u8500_clk_init(struct device_node *np)
 	if (fw_version != NULL) {
 		switch (fw_version->project) {
 		case PRCMU_FW_PROJECT_U8500_C2:
+		case PRCMU_FW_PROJECT_U8500_MBL:
 		case PRCMU_FW_PROJECT_U8520:
 		case PRCMU_FW_PROJECT_U8420:
+		case PRCMU_FW_PROJECT_U8420_SYSCLK:
 			sgaclk_parent = "soc0_pll";
 			break;
 		default:
diff --git a/drivers/clk/versatile/Kconfig b/drivers/clk/versatile/Kconfig
index ac766855ba16..c2618f1477a2 100644
--- a/drivers/clk/versatile/Kconfig
+++ b/drivers/clk/versatile/Kconfig
@@ -9,7 +9,7 @@ config COMMON_CLK_VERSATILE
 		COMPILE_TEST
 	select REGMAP_MMIO
 	---help---
-          Supports clocking on ARM Reference designs:
+	  Supports clocking on ARM Reference designs:
 	  - Integrator/AP and Integrator/CP
 	  - RealView PB1176, EB, PB11MP and PBX
 	  - Versatile Express