diff options
Diffstat (limited to 'drivers/clk/ux500')
-rw-r--r-- | drivers/clk/ux500/Makefile | 3 | ||||
-rw-r--r-- | drivers/clk/ux500/abx500-clk.c | 73 | ||||
-rw-r--r-- | drivers/clk/ux500/clk-prcmu.c | 72 | ||||
-rw-r--r-- | drivers/clk/ux500/clk.h | 12 | ||||
-rw-r--r-- | drivers/clk/ux500/u8500_clk.c | 78 |
5 files changed, 224 insertions, 14 deletions
diff --git a/drivers/clk/ux500/Makefile b/drivers/clk/ux500/Makefile index 858fbfe66281..bcc0c11a507c 100644 --- a/drivers/clk/ux500/Makefile +++ b/drivers/clk/ux500/Makefile @@ -10,3 +10,6 @@ obj-y += clk-prcmu.o obj-y += u8500_clk.o obj-y += u9540_clk.o obj-y += u8540_clk.o + +# ABX500 clock driver +obj-y += abx500-clk.o diff --git a/drivers/clk/ux500/abx500-clk.c b/drivers/clk/ux500/abx500-clk.c new file mode 100644 index 000000000000..e27c52317ffe --- /dev/null +++ b/drivers/clk/ux500/abx500-clk.c @@ -0,0 +1,73 @@ +/* + * abx500 clock implementation for ux500 platform. + * + * Copyright (C) 2012 ST-Ericsson SA + * Author: Ulf Hansson <ulf.hansson@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/err.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mfd/abx500/ab8500.h> + +/* TODO: Add clock implementations here */ + + +/* Clock definitions for ab8500 */ +static int ab8500_reg_clks(struct device *dev) +{ + return 0; +} + +/* Clock definitions for ab8540 */ +static int ab8540_reg_clks(struct device *dev) +{ + return 0; +} + +/* Clock definitions for ab9540 */ +static int ab9540_reg_clks(struct device *dev) +{ + return 0; +} + +static int __devinit abx500_clk_probe(struct platform_device *pdev) +{ + struct ab8500 *parent = dev_get_drvdata(pdev->dev.parent); + int ret; + + if (is_ab8500(parent) || is_ab8505(parent)) { + ret = ab8500_reg_clks(&pdev->dev); + } else if (is_ab8540(parent)) { + ret = ab8540_reg_clks(&pdev->dev); + } else if (is_ab9540(parent)) { + ret = ab9540_reg_clks(&pdev->dev); + } else { + dev_err(&pdev->dev, "non supported plf id\n"); + return -ENODEV; + } + + return ret; +} + +static struct platform_driver abx500_clk_driver = { + .driver = { + .name = "abx500-clk", + .owner = THIS_MODULE, + }, + .probe = abx500_clk_probe, +}; + +static int __init abx500_clk_init(void) +{ + return platform_driver_register(&abx500_clk_driver); +} + +arch_initcall(abx500_clk_init); + +MODULE_AUTHOR("Ulf Hansson <ulf.hansson@linaro.org"); +MODULE_DESCRIPTION("ABX500 clk driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/clk/ux500/clk-prcmu.c b/drivers/clk/ux500/clk-prcmu.c index 930cdfeb47ab..74faa7e3cf59 100644 --- a/drivers/clk/ux500/clk-prcmu.c +++ b/drivers/clk/ux500/clk-prcmu.c @@ -133,6 +133,40 @@ out_error: hw->init->name); } +static int clk_prcmu_opp_volt_prepare(struct clk_hw *hw) +{ + int err; + struct clk_prcmu *clk = to_clk_prcmu(hw); + + err = prcmu_request_ape_opp_100_voltage(true); + if (err) { + pr_err("clk_prcmu: %s failed to request APE OPP VOLT for %s.\n", + __func__, hw->init->name); + return err; + } + + err = prcmu_request_clock(clk->cg_sel, true); + if (err) + prcmu_request_ape_opp_100_voltage(false); + + return err; +} + +static void clk_prcmu_opp_volt_unprepare(struct clk_hw *hw) +{ + struct clk_prcmu *clk = to_clk_prcmu(hw); + + if (prcmu_request_clock(clk->cg_sel, false)) + goto out_error; + if (prcmu_request_ape_opp_100_voltage(false)) + goto out_error; + return; + +out_error: + pr_err("clk_prcmu: %s failed to disable %s.\n", __func__, + hw->init->name); +} + static struct clk_ops clk_prcmu_scalable_ops = { .prepare = clk_prcmu_prepare, .unprepare = clk_prcmu_unprepare, @@ -153,6 +187,13 @@ static struct clk_ops clk_prcmu_gate_ops = { .recalc_rate = clk_prcmu_recalc_rate, }; +static struct clk_ops clk_prcmu_scalable_rate_ops = { + .is_enabled = clk_prcmu_is_enabled, + .recalc_rate = clk_prcmu_recalc_rate, + .round_rate = clk_prcmu_round_rate, + .set_rate = clk_prcmu_set_rate, +}; + static struct clk_ops clk_prcmu_rate_ops = { .is_enabled = clk_prcmu_is_enabled, .recalc_rate = clk_prcmu_recalc_rate, @@ -167,6 +208,17 @@ static struct clk_ops clk_prcmu_opp_gate_ops = { .recalc_rate = clk_prcmu_recalc_rate, }; +static struct clk_ops clk_prcmu_opp_volt_scalable_ops = { + .prepare = clk_prcmu_opp_volt_prepare, + .unprepare = clk_prcmu_opp_volt_unprepare, + .enable = clk_prcmu_enable, + .disable = clk_prcmu_disable, + .is_enabled = clk_prcmu_is_enabled, + .recalc_rate = clk_prcmu_recalc_rate, + .round_rate = clk_prcmu_round_rate, + .set_rate = clk_prcmu_set_rate, +}; + static struct clk *clk_reg_prcmu(const char *name, const char *parent_name, u8 cg_sel, @@ -233,6 +285,16 @@ struct clk *clk_reg_prcmu_gate(const char *name, &clk_prcmu_gate_ops); } +struct clk *clk_reg_prcmu_scalable_rate(const char *name, + const char *parent_name, + u8 cg_sel, + unsigned long rate, + unsigned long flags) +{ + return clk_reg_prcmu(name, parent_name, cg_sel, rate, flags, + &clk_prcmu_scalable_rate_ops); +} + struct clk *clk_reg_prcmu_rate(const char *name, const char *parent_name, u8 cg_sel, @@ -250,3 +312,13 @@ struct clk *clk_reg_prcmu_opp_gate(const char *name, return clk_reg_prcmu(name, parent_name, cg_sel, 0, flags, &clk_prcmu_opp_gate_ops); } + +struct clk *clk_reg_prcmu_opp_volt_scalable(const char *name, + const char *parent_name, + u8 cg_sel, + unsigned long rate, + unsigned long flags) +{ + return clk_reg_prcmu(name, parent_name, cg_sel, rate, flags, + &clk_prcmu_opp_volt_scalable_ops); +} diff --git a/drivers/clk/ux500/clk.h b/drivers/clk/ux500/clk.h index 836d7d16751e..c3e449169a83 100644 --- a/drivers/clk/ux500/clk.h +++ b/drivers/clk/ux500/clk.h @@ -35,6 +35,12 @@ struct clk *clk_reg_prcmu_gate(const char *name, u8 cg_sel, unsigned long flags); +struct clk *clk_reg_prcmu_scalable_rate(const char *name, + const char *parent_name, + u8 cg_sel, + unsigned long rate, + unsigned long flags); + struct clk *clk_reg_prcmu_rate(const char *name, const char *parent_name, u8 cg_sel, @@ -45,4 +51,10 @@ struct clk *clk_reg_prcmu_opp_gate(const char *name, u8 cg_sel, unsigned long flags); +struct clk *clk_reg_prcmu_opp_volt_scalable(const char *name, + const char *parent_name, + u8 cg_sel, + unsigned long rate, + unsigned long flags); + #endif /* __UX500_CLK_H */ diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index 1f6bfb8f8737..6b889a0e90b3 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -40,7 +40,7 @@ void u8500_clk_init(void) CLK_IS_ROOT|CLK_IGNORE_UNUSED, 32768); clk_register_clkdev(clk, "clk32k", NULL); - clk_register_clkdev(clk, NULL, "rtc-pl031"); + clk_register_clkdev(clk, "apb_pclk", "rtc-pl031"); /* PRCMU clocks */ fw_version = prcmu_get_fw_version(); @@ -164,10 +164,11 @@ void u8500_clk_init(void) clk_register_clkdev(clk, NULL, "mtu0"); clk_register_clkdev(clk, NULL, "mtu1"); - clk = clk_reg_prcmu_gate("sdmmcclk", NULL, PRCMU_SDMMCCLK, CLK_IS_ROOT); + clk = clk_reg_prcmu_opp_volt_scalable("sdmmcclk", NULL, PRCMU_SDMMCCLK, + 100000000, + CLK_IS_ROOT|CLK_SET_RATE_GATE); clk_register_clkdev(clk, NULL, "sdmmc"); - clk = clk_reg_prcmu_scalable("dsi_pll", "hdmiclk", PRCMU_PLLDSI, 0, CLK_SET_RATE_GATE); clk_register_clkdev(clk, "dsihs2", "mcde"); @@ -199,16 +200,18 @@ void u8500_clk_init(void) clk_register_clkdev(clk, "dsilp2", "dsilink.2"); clk_register_clkdev(clk, "dsilp2", "mcde"); - clk = clk_reg_prcmu_rate("smp_twd", NULL, PRCMU_ARMSS, - CLK_IS_ROOT|CLK_GET_RATE_NOCACHE| - CLK_IGNORE_UNUSED); + clk = clk_reg_prcmu_scalable_rate("armss", NULL, + PRCMU_ARMSS, 0, CLK_IS_ROOT|CLK_IGNORE_UNUSED); + clk_register_clkdev(clk, "armss", NULL); + + clk = clk_register_fixed_factor(NULL, "smp_twd", "armss", + CLK_IGNORE_UNUSED, 1, 2); clk_register_clkdev(clk, NULL, "smp_twd"); /* * FIXME: Add special handled PRCMU clocks here: - * 1. clk_arm, use PRCMU_ARMCLK. - * 2. clkout0yuv, use PRCMU as parent + need regulator + pinctrl. - * 3. ab9540_clkout1yuv, see clkout0yuv + * 1. clkout0yuv, use PRCMU as parent + need regulator + pinctrl. + * 2. ab9540_clkout1yuv, see clkout0yuv */ /* PRCC P-clocks */ @@ -222,10 +225,17 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", U8500_CLKRST1_BASE, BIT(2), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.1"); + clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", U8500_CLKRST1_BASE, BIT(3), 0); + clk_register_clkdev(clk, "apb_pclk", "msp0"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.0"); + clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", U8500_CLKRST1_BASE, BIT(4), 0); + clk_register_clkdev(clk, "apb_pclk", "msp1"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.1"); clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", U8500_CLKRST1_BASE, BIT(5), 0); @@ -233,6 +243,7 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", U8500_CLKRST1_BASE, BIT(6), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.2"); clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", U8500_CLKRST1_BASE, BIT(7), 0); @@ -240,6 +251,7 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", U8500_CLKRST1_BASE, BIT(8), 0); + clk_register_clkdev(clk, "apb_pclk", "slimbus0"); clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", U8500_CLKRST1_BASE, BIT(9), 0); @@ -249,11 +261,16 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", U8500_CLKRST1_BASE, BIT(10), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.4"); + clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", U8500_CLKRST1_BASE, BIT(11), 0); + clk_register_clkdev(clk, "apb_pclk", "msp3"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.3"); clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", U8500_CLKRST2_BASE, BIT(0), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.3"); clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", U8500_CLKRST2_BASE, BIT(1), 0); @@ -273,12 +290,13 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", U8500_CLKRST2_BASE, BIT(5), 0); + clk_register_clkdev(clk, "apb_pclk", "msp2"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.2"); clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", U8500_CLKRST2_BASE, BIT(6), 0); clk_register_clkdev(clk, "apb_pclk", "sdi1"); - clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", U8500_CLKRST2_BASE, BIT(7), 0); clk_register_clkdev(clk, "apb_pclk", "sdi3"); @@ -302,7 +320,7 @@ void u8500_clk_init(void) clk_register_clkdev(clk, NULL, "gpioblock1"); clk = clk_reg_prcc_pclk("p2_pclk12", "per2clk", U8500_CLKRST2_BASE, - BIT(11), 0); + BIT(12), 0); clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", U8500_CLKRST3_BASE, BIT(0), 0); @@ -310,10 +328,15 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", U8500_CLKRST3_BASE, BIT(1), 0); + clk_register_clkdev(clk, "apb_pclk", "ssp0"); + clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", U8500_CLKRST3_BASE, BIT(2), 0); + clk_register_clkdev(clk, "apb_pclk", "ssp1"); + clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", U8500_CLKRST3_BASE, BIT(3), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.0"); clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", U8500_CLKRST3_BASE, BIT(4), 0); @@ -321,6 +344,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p3_pclk5", "per3clk", U8500_CLKRST3_BASE, BIT(5), 0); + clk_register_clkdev(clk, "apb_pclk", "ske"); + clk_register_clkdev(clk, "apb_pclk", "nmk-ske-keypad"); clk = clk_reg_prcc_pclk("p3_pclk6", "per3clk", U8500_CLKRST3_BASE, BIT(6), 0); @@ -349,6 +374,7 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p6_pclk0", "per6clk", U8500_CLKRST6_BASE, BIT(0), 0); + clk_register_clkdev(clk, "apb_pclk", "rng"); clk = clk_reg_prcc_pclk("p6_pclk1", "per6clk", U8500_CLKRST6_BASE, BIT(1), 0); @@ -398,10 +424,17 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk", U8500_CLKRST1_BASE, BIT(2), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.1"); + clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk", U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp0"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.0"); + clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk", U8500_CLKRST1_BASE, BIT(4), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp1"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.1"); clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmcclk", U8500_CLKRST1_BASE, BIT(5), CLK_SET_RATE_GATE); @@ -409,17 +442,25 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk", U8500_CLKRST1_BASE, BIT(6), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.2"); + clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk", - U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE); - /* FIXME: Redefinition of BIT(3). */ + U8500_CLKRST1_BASE, BIT(8), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "slimbus0"); + clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk", U8500_CLKRST1_BASE, BIT(9), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.4"); + clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk", U8500_CLKRST1_BASE, BIT(10), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp3"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.3"); /* Periph2 */ clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk", U8500_CLKRST2_BASE, BIT(0), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.3"); clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmcclk", U8500_CLKRST2_BASE, BIT(2), CLK_SET_RATE_GATE); @@ -427,6 +468,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk", U8500_CLKRST2_BASE, BIT(3), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp2"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.2"); clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmcclk", U8500_CLKRST2_BASE, BIT(4), CLK_SET_RATE_GATE); @@ -447,10 +490,15 @@ void u8500_clk_init(void) /* Periph3 */ clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk", U8500_CLKRST3_BASE, BIT(1), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "ssp0"); + clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk", U8500_CLKRST3_BASE, BIT(2), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "ssp1"); + clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk", U8500_CLKRST3_BASE, BIT(3), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.0"); clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmcclk", U8500_CLKRST3_BASE, BIT(4), CLK_SET_RATE_GATE); @@ -458,6 +506,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p3_ske_kclk", "rtc32k", U8500_CLKRST3_BASE, BIT(5), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "ske"); + clk_register_clkdev(clk, NULL, "nmk-ske-keypad"); clk = clk_reg_prcc_kclk("p3_uart2_kclk", "uartclk", U8500_CLKRST3_BASE, BIT(6), CLK_SET_RATE_GATE); @@ -470,5 +520,5 @@ void u8500_clk_init(void) /* Periph6 */ clk = clk_reg_prcc_kclk("p3_rng_kclk", "rngclk", U8500_CLKRST6_BASE, BIT(0), CLK_SET_RATE_GATE); - + clk_register_clkdev(clk, NULL, "rng"); } |