diff options
Diffstat (limited to 'drivers/clk/tegra/clk-tegra210.c')
| -rw-r--r-- | drivers/clk/tegra/clk-tegra210.c | 182 |
1 files changed, 3 insertions, 179 deletions
diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c index b4df5c46642f..2896d2e783ce 100644 --- a/drivers/clk/tegra/clk-tegra210.c +++ b/drivers/clk/tegra/clk-tegra210.c @@ -155,27 +155,6 @@ #define PMC_PLLM_WB0_OVERRIDE 0x1dc #define PMC_PLLM_WB0_OVERRIDE_2 0x2b0 -#define UTMIP_PLL_CFG2 0x488 -#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xfff) << 6) -#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERUP BIT(1) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERUP BIT(3) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERUP BIT(5) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERDOWN BIT(24) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERUP BIT(25) - -#define UTMIP_PLL_CFG1 0x484 -#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27) -#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) -#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17) -#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16) -#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15) -#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14) -#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12) - #define SATA_PLL_CFG0 0x490 #define SATA_PLL_CFG0_PADPLL_RESET_SWCTL BIT(0) #define SATA_PLL_CFG0_PADPLL_USE_LOCKDET BIT(2) @@ -2038,47 +2017,6 @@ static struct tegra_clk_pll_params pll_u_vco_params = { .calc_rate = tegra210_pll_fixed_mdiv_cfg, }; -struct utmi_clk_param { - /* Oscillator Frequency in KHz */ - u32 osc_frequency; - /* UTMIP PLL Enable Delay Count */ - u8 enable_delay_count; - /* UTMIP PLL Stable count */ - u16 stable_count; - /* UTMIP PLL Active delay count */ - u8 active_delay_count; - /* UTMIP PLL Xtal frequency count */ - u16 xtal_freq_count; -}; - -static const struct utmi_clk_param utmi_parameters[] = { - { - .osc_frequency = 38400000, .enable_delay_count = 0x0, - .stable_count = 0x0, .active_delay_count = 0x6, - .xtal_freq_count = 0x80 - }, { - .osc_frequency = 13000000, .enable_delay_count = 0x02, - .stable_count = 0x33, .active_delay_count = 0x05, - .xtal_freq_count = 0x7f - }, { - .osc_frequency = 19200000, .enable_delay_count = 0x03, - .stable_count = 0x4b, .active_delay_count = 0x06, - .xtal_freq_count = 0xbb - }, { - .osc_frequency = 12000000, .enable_delay_count = 0x02, - .stable_count = 0x2f, .active_delay_count = 0x08, - .xtal_freq_count = 0x76 - }, { - .osc_frequency = 26000000, .enable_delay_count = 0x04, - .stable_count = 0x66, .active_delay_count = 0x09, - .xtal_freq_count = 0xfe - }, { - .osc_frequency = 16800000, .enable_delay_count = 0x03, - .stable_count = 0x41, .active_delay_count = 0x0a, - .xtal_freq_count = 0xa4 - }, -}; - static struct tegra_clk tegra210_clks[tegra_clk_max] __initdata = { [tegra_clk_ispb] = { .dt_id = TEGRA210_CLK_ISPB, .present = true }, [tegra_clk_rtc] = { .dt_id = TEGRA210_CLK_RTC, .present = true }, @@ -2348,114 +2286,6 @@ static struct tegra_audio_clk_info tegra210_audio_plls[] = { static struct clk **clks; -static void tegra210_utmi_param_configure(void __iomem *clk_base) -{ - u32 reg; - int i; - - for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) { - if (osc_freq == utmi_parameters[i].osc_frequency) - break; - } - - if (i >= ARRAY_SIZE(utmi_parameters)) { - pr_err("%s: Unexpected oscillator freq %lu\n", __func__, - osc_freq); - return; - } - - reg = readl_relaxed(clk_base + PLLU_HW_PWRDN_CFG0); - reg |= PLLU_HW_PWRDN_CFG0_IDDQ_PD_INCLUDE | - PLLU_HW_PWRDN_CFG0_USE_SWITCH_DETECT | - PLLU_HW_PWRDN_CFG0_USE_LOCKDET; - reg &= ~(PLLU_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL | - PLLU_HW_PWRDN_CFG0_CLK_SWITCH_SWCTL); - writel_relaxed(reg, clk_base + PLLU_HW_PWRDN_CFG0); - - reg = readl_relaxed(clk_base + PLLU_HW_PWRDN_CFG0); - reg |= PLLU_HW_PWRDN_CFG0_SEQ_ENABLE; - writel_relaxed(reg, clk_base + PLLU_HW_PWRDN_CFG0); - udelay(1); - - reg = readl_relaxed(clk_base + PLLU_BASE); - reg &= ~PLLU_BASE_CLKENABLE_USB; - writel_relaxed(reg, clk_base + PLLU_BASE); - - reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); - reg &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE; - writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); - - udelay(10); - - reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2); - - /* Program UTMIP PLL stable and active counts */ - /* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */ - reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0); - reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count); - - reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0); - - reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i]. - active_delay_count); - writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2); - - /* Program UTMIP PLL delay and oscillator frequency counts */ - reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1); - reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0); - - reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i]. - enable_delay_count); - - reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0); - reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(utmi_parameters[i]. - xtal_freq_count); - - reg |= UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN; - writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1); - - /* Remove power downs from UTMIP PLL control bits */ - reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1); - reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; - reg |= UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP; - writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1); - udelay(1); - - /* Enable samplers for SNPS, XUSB_HOST, XUSB_DEV */ - reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2); - reg |= UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERUP; - reg |= UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERUP; - reg |= UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERUP; - reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN; - reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN; - reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERDOWN; - writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2); - - /* Setup HW control of UTMIPLL */ - reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1); - reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; - reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP; - writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1); - - reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); - reg |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET; - reg &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL; - writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); - - udelay(1); - - reg = readl_relaxed(clk_base + XUSB_PLL_CFG0); - reg &= ~XUSB_PLL_CFG0_UTMIPLL_LOCK_DLY; - writel_relaxed(reg, clk_base + XUSB_PLL_CFG0); - - udelay(1); - - /* Enable HW control UTMIPLL */ - reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); - reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE; - writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); -} - static __init void tegra210_periph_clk_init(void __iomem *clk_base, void __iomem *pmc_base) { @@ -2523,7 +2353,6 @@ static __init void tegra210_periph_clk_init(void __iomem *clk_base, static void __init tegra210_pll_init(void __iomem *clk_base, void __iomem *pmc) { - u32 val; struct clk *clk; /* PLLC */ @@ -2583,12 +2412,9 @@ static void __init tegra210_pll_init(void __iomem *clk_base, clks[TEGRA210_CLK_PLL_M_UD] = clk; /* PLLU_VCO */ - val = readl(clk_base + pll_u_vco_params.base_reg); - val &= ~PLLU_BASE_OVERRIDE; /* disable PLLU_OVERRIDE */ - writel(val, clk_base + pll_u_vco_params.base_reg); - - clk = tegra_clk_register_pllre("pll_u_vco", "pll_ref", clk_base, pmc, - 0, &pll_u_vco_params, &pll_u_lock, pll_ref_freq); + clk = tegra_clk_register_pllu_tegra210("pll_u_vco", "pll_ref", + clk_base, 0, &pll_u_vco_params, + &pll_u_lock); clk_register_clkdev(clk, "pll_u_vco", NULL); clks[TEGRA210_CLK_PLL_U] = clk; @@ -2621,8 +2447,6 @@ static void __init tegra210_pll_init(void __iomem *clk_base, clk_register_clkdev(clk, "pll_u_out2", NULL); clks[TEGRA210_CLK_PLL_U_OUT2] = clk; - tegra210_utmi_param_configure(clk_base); - /* PLLU_480M */ clk = clk_register_gate(NULL, "pll_u_480M", "pll_u_vco", CLK_SET_RATE_PARENT, clk_base + PLLU_BASE, |