1 files changed, 0 insertions, 98 deletions
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index 4a8294dad613..880095048d4d 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -351,104 +351,6 @@ static void sun7i_a20_get_out_factors(u32 *freq, u32 parent_rate,
 	*p = calcp;
 }
 
-
-
-/**
- * sun7i_a20_gmac_clk_setup - Setup function for A20/A31 GMAC clock module
- *
- * This clock looks something like this
- *                               ________________________
- *  MII TX clock from PHY >-----|___________    _________|----> to GMAC core
- *  GMAC Int. RGMII TX clk >----|___________\__/__gate---|----> to PHY
- *  Ext. 125MHz RGMII TX clk >--|__divider__/            |
- *                              |________________________|
- *
- * The external 125 MHz reference is optional, i.e. GMAC can use its
- * internal TX clock just fine. The A31 GMAC clock module does not have
- * the divider controls for the external reference.
- *
- * To keep it simple, let the GMAC use either the MII TX clock for MII mode,
- * and its internal TX clock for GMII and RGMII modes. The GMAC driver should
- * select the appropriate source and gate/ungate the output to the PHY.
- *
- * Only the GMAC should use this clock. Altering the clock so that it doesn't
- * match the GMAC's operation parameters will result in the GMAC not being
- * able to send traffic out. The GMAC driver should set the clock rate and
- * enable/disable this clock to configure the required state. The clock
- * driver then responds by auto-reparenting the clock.
- */
-
-#define SUN7I_A20_GMAC_GPIT	2
-#define SUN7I_A20_GMAC_MASK	0x3
-#define SUN7I_A20_GMAC_PARENTS	2
-
-static void __init sun7i_a20_gmac_clk_setup(struct device_node *node)
-{
-	struct clk *clk;
-	struct clk_mux *mux;
-	struct clk_gate *gate;
-	const char *clk_name = node->name;
-	const char *parents[SUN7I_A20_GMAC_PARENTS];
-	void *reg;
-
-	if (of_property_read_string(node, "clock-output-names", &clk_name))
-		return;
-
-	/* allocate mux and gate clock structs */
-	mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL);
-	if (!mux)
-		return;
-
-	gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
-	if (!gate)
-		goto free_mux;
-
-	/* gmac clock requires exactly 2 parents */
-	parents[0] = of_clk_get_parent_name(node, 0);
-	parents[1] = of_clk_get_parent_name(node, 1);
-	if (!parents[0] || !parents[1])
-		goto free_gate;
-
-	reg = of_iomap(node, 0);
-	if (!reg)
-		goto free_gate;
-
-	/* set up gate and fixed rate properties */
-	gate->reg = reg;
-	gate->bit_idx = SUN7I_A20_GMAC_GPIT;
-	gate->lock = &clk_lock;
-	mux->reg = reg;
-	mux->mask = SUN7I_A20_GMAC_MASK;
-	mux->flags = CLK_MUX_INDEX_BIT;
-	mux->lock = &clk_lock;
-
-	clk = clk_register_composite(NULL, clk_name,
-			parents, SUN7I_A20_GMAC_PARENTS,
-			&mux->hw, &clk_mux_ops,
-			NULL, NULL,
-			&gate->hw, &clk_gate_ops,
-			0);
-
-	if (IS_ERR(clk))
-		goto iounmap_reg;
-
-	of_clk_add_provider(node, of_clk_src_simple_get, clk);
-	clk_register_clkdev(clk, clk_name, NULL);
-
-	return;
-
-iounmap_reg:
-	iounmap(reg);
-free_gate:
-	kfree(gate);
-free_mux:
-	kfree(mux);
-}
-CLK_OF_DECLARE(sun7i_a20_gmac, "allwinner,sun7i-a20-gmac-clk",
-		sun7i_a20_gmac_clk_setup);
-
-
-
 /**
  * clk_sunxi_mmc_phase_control() - configures MMC clock phase control
  */