diff options
Diffstat (limited to 'drivers/clk/sunxi/clk-sunxi.c')
| -rw-r--r-- | drivers/clk/sunxi/clk-sunxi.c | 161 |
1 files changed, 12 insertions, 149 deletions
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index b654b7b1d137..d5dc951264ca 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -19,6 +19,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/reset-controller.h> +#include <linux/spinlock.h> #include "clk-factors.h" @@ -319,46 +320,6 @@ static void sun4i_get_apb1_factors(u32 *freq, u32 parent_rate, -/** - * sun4i_get_mod0_factors() - calculates m, n factors for MOD0-style clocks - * MOD0 rate is calculated as follows - * rate = (parent_rate >> p) / (m + 1); - */ - -static void sun4i_get_mod0_factors(u32 *freq, u32 parent_rate, - u8 *n, u8 *k, u8 *m, u8 *p) -{ - u8 div, calcm, calcp; - - /* These clocks can only divide, so we will never be able to achieve - * frequencies higher than the parent frequency */ - if (*freq > parent_rate) - *freq = parent_rate; - - div = DIV_ROUND_UP(parent_rate, *freq); - - if (div < 16) - calcp = 0; - else if (div / 2 < 16) - calcp = 1; - else if (div / 4 < 16) - calcp = 2; - else - calcp = 3; - - calcm = DIV_ROUND_UP(div, 1 << calcp); - - *freq = (parent_rate >> calcp) / calcm; - - /* we were called to round the frequency, we can now return */ - if (n == NULL) - return; - - *m = calcm - 1; - *p = calcp; -} - - /** * sun7i_a20_get_out_factors() - calculates m, p factors for CLK_OUT_A/B @@ -440,16 +401,6 @@ EXPORT_SYMBOL(clk_sunxi_mmc_phase_control); * sunxi_factors_clk_setup() - Setup function for factor clocks */ -#define SUNXI_FACTORS_MUX_MASK 0x3 - -struct factors_data { - int enable; - int mux; - struct clk_factors_config *table; - void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p); - const char *name; -}; - static struct clk_factors_config sun4i_pll1_config = { .nshift = 8, .nwidth = 5, @@ -504,14 +455,6 @@ static struct clk_factors_config sun4i_apb1_config = { }; /* user manual says "n" but it's really "p" */ -static struct clk_factors_config sun4i_mod0_config = { - .mshift = 0, - .mwidth = 4, - .pshift = 16, - .pwidth = 2, -}; - -/* user manual says "n" but it's really "p" */ static struct clk_factors_config sun7i_a20_out_config = { .mshift = 8, .mwidth = 5, @@ -568,13 +511,6 @@ static const struct factors_data sun4i_apb1_data __initconst = { .getter = sun4i_get_apb1_factors, }; -static const struct factors_data sun4i_mod0_data __initconst = { - .enable = 31, - .mux = 24, - .table = &sun4i_mod0_config, - .getter = sun4i_get_mod0_factors, -}; - static const struct factors_data sun7i_a20_out_data __initconst = { .enable = 31, .mux = 24, @@ -583,89 +519,9 @@ static const struct factors_data sun7i_a20_out_data __initconst = { }; static struct clk * __init sunxi_factors_clk_setup(struct device_node *node, - const struct factors_data *data) + const struct factors_data *data) { - struct clk *clk; - struct clk_factors *factors; - struct clk_gate *gate = NULL; - struct clk_mux *mux = NULL; - struct clk_hw *gate_hw = NULL; - struct clk_hw *mux_hw = NULL; - const char *clk_name = node->name; - const char *parents[SUNXI_MAX_PARENTS]; - void __iomem *reg; - int i = 0; - - reg = of_iomap(node, 0); - - /* if we have a mux, we will have >1 parents */ - while (i < SUNXI_MAX_PARENTS && - (parents[i] = of_clk_get_parent_name(node, i)) != NULL) - i++; - - /* - * some factor clocks, such as pll5 and pll6, may have multiple - * outputs, and have their name designated in factors_data - */ - if (data->name) - clk_name = data->name; - else - of_property_read_string(node, "clock-output-names", &clk_name); - - factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL); - if (!factors) - return NULL; - - /* Add a gate if this factor clock can be gated */ - if (data->enable) { - gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); - if (!gate) { - kfree(factors); - return NULL; - } - - /* set up gate properties */ - gate->reg = reg; - gate->bit_idx = data->enable; - gate->lock = &clk_lock; - gate_hw = &gate->hw; - } - - /* Add a mux if this factor clock can be muxed */ - if (data->mux) { - mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL); - if (!mux) { - kfree(factors); - kfree(gate); - return NULL; - } - - /* set up gate properties */ - mux->reg = reg; - mux->shift = data->mux; - mux->mask = SUNXI_FACTORS_MUX_MASK; - mux->lock = &clk_lock; - mux_hw = &mux->hw; - } - - /* set up factors properties */ - factors->reg = reg; - factors->config = data->table; - factors->get_factors = data->getter; - factors->lock = &clk_lock; - - clk = clk_register_composite(NULL, clk_name, - parents, i, - mux_hw, &clk_mux_ops, - &factors->hw, &clk_factors_ops, - gate_hw, &clk_gate_ops, 0); - - if (!IS_ERR(clk)) { - of_clk_add_provider(node, of_clk_src_simple_get, clk); - clk_register_clkdev(clk, clk_name, NULL); - } - - return clk; + return sunxi_factors_register(node, data, &clk_lock); } @@ -762,10 +618,19 @@ static const struct div_data sun4i_ahb_data __initconst = { .width = 2, }; +static const struct clk_div_table sun4i_apb0_table[] __initconst = { + { .val = 0, .div = 2 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 4 }, + { .val = 3, .div = 8 }, + { } /* sentinel */ +}; + static const struct div_data sun4i_apb0_data __initconst = { .shift = 8, .pow = 1, .width = 2, + .table = sun4i_apb0_table, }; static const struct div_data sun6i_a31_apb2_div_data __initconst = { @@ -1199,7 +1064,6 @@ static const struct of_device_id clk_factors_match[] __initconst = { {.compatible = "allwinner,sun7i-a20-pll4-clk", .data = &sun7i_a20_pll4_data,}, {.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_data,}, {.compatible = "allwinner,sun4i-a10-apb1-clk", .data = &sun4i_apb1_data,}, - {.compatible = "allwinner,sun4i-a10-mod0-clk", .data = &sun4i_mod0_data,}, {.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,}, {} }; @@ -1311,7 +1175,6 @@ static void __init sun4i_a10_init_clocks(struct device_node *node) CLK_OF_DECLARE(sun4i_a10_clk_init, "allwinner,sun4i-a10", sun4i_a10_init_clocks); static const char *sun5i_critical_clocks[] __initdata = { - "mbus", "pll5_ddr", "ahb_sdram", }; |